The beta subunit dissociates readily from the Escherichia coli DNA polymerase III holoenzyme

Purified DNA polymerase III holoenzyme (holoenzyme) was separated by glycerol gradient sedimentation into the beta subunit and the subassembly that lacks it (pol III). In the presence of ATP, beta subunit dimer dissociated from holoenzyme with a KD of 1 nM; in the absence of ATP, the KD was greater than 5 nM. The beta subunit was known to remain tightly associated in the holoenzyme upon formation of an initiation complex with a primed template and during the course of replication. With separation from the template, holoenzyme dissociated into beta and pol III. Cycling to a new template depended on the reformation of holoenzyme. Holoenzyme was in equilibrium with pol III and the beta subunit in crude enzyme fractions as well as in pure preparations.     

Nucleoside triphosphate binding to DNA polymerase III holoenzyme of Escherichia coli. A direct photoaffinity labeling study

The physical basis of ATP binding and activation of DNA polymerase III holoenzyme was studied by an ultraviolet irradiation cross-linking technique. ATP and dATP were photocrosslinked to the alpha, tau, gamma, and delta subunits of holoenzyme; photocrosslinking of dATP was competitively inhibited by ATP. No photocrosslinking was observed with GTP or CTP, nor did GTP, CTP, or UTP inhibit cross-linking of ATP. ADP and adenosine 5'-O-(3-thio)-triphosphate, both potent inhibitors of ATP activation of holoenzyme, inhibited cross-linking of ATP to tau, gamma, and delta subunits, but not to the alpha subunit, suggesting that one or more of these subunits are ATP (or dATP)-binding sites. Photocrosslinking of dTTP to the ATP-activated holoenzyme was exclusively to the epsilon subunit, the dnaQ ( mutD ) gene product; dCTP and dGTP were not photocrosslinked to any subunit. Binding of dTTP was enhanced by ATP, but by no other nucleotide (or deoxynucleotide). This binding of dTTP to epsilon, a subunit likely responsible for regulation of proofreading by the holoenzyme, may function in the control of the fidelity of replication.     

ATP activation of DNA polymerase III holoenzyme from Escherichia coli. II. Initiation complex: stoichiometry and reactivity

DNA polymerase III holoenzyme (holenzyme) has an ATPase activity elicited only by a primed DNA template. Reaction of preformed ATP.holoenzyme complex with a primed template results in hydrolysis of the ATP bound to the holoenzyme, release of ADP and Pi, and formation of an initiation complex between holoenzyme and the primed template. Approximately two ATP molecules are hydrolyzed for each initiation complex formed, a value in keeping with the number bound in the ATP.holoenzyme complex. The possibility that the latter and the initiation complex contain two holoenzyme molecules is supported by the presence of two beta monomers in the initiation complex. Holoenzyme action in the absence of ATP resembles that of pol III (the holoenzyme core) or DNA polymerase III (holoenzyme lacking the beta subunit), with or without ATP, in sensitivity to salt and in processivity of elongation. The initiation complex formed by ATP-activated holoenzyme resists a level of KCl (150 mM) that completely inhibits nonactivated holoenzyme and the incomplete forms of the holoenzyme, and displays a processivity at least 20 times greater. Upon completing replication of available template, holoenzyme can dissociate and form an initiation complex with another primed template, provided ATP is available to reactivate the holoenzyme. By inference, no essential subunits are lost in the cycle of initiation, elongation and dissociation.     

Analysis of the ATPase subassembly which initiates processive DNA synthesis by DNA polymerase III holoenzyme.

The gamma complex (gamma delta delta' chi psi) subassembly of DNA polymerase III holoenzyme transfers the beta subunit onto primed DNA in a reaction which requires ATP hydrolysis. Once on DNA, beta is a "sliding clamp" which tethers the polymerase to DNA for highly processive synthesis. We have examined beta and the gamma complex to identify which subunit(s) hydrolyzes ATP. We find the gamma complex is a DNA dependent ATPase. The beta subunit, which lacks ATPase activity, enhances the gamma complex ATPase when primed DNA is used as an effector. Hence, the gamma complex recognizes DNA and couples ATP hydrolysis to clamp beta onto primed DNA. Study of gamma complex subunits showed no single subunit contained significant ATPase activity. However, the heterodimers, gamma delta and gamma delta', were both DNA-dependent ATPases. Only the gamma delta ATPase was stimulated by beta and was functional in transferring the beta from solution to primed DNA. Similarity in ATPase activity of DNA polymerase III holoenzyme accessory proteins to accessory proteins of phage T4 DNA polymerase and mammalian DNA polymerase delta suggests the basic strategy of chromosome duplication has been conserved throughout evolution.     

Accessory proteins bind a primed template and mediate rapid cycling of DNA polymerase III holoenzyme from Escherichia coli

DNA polymerase III holoenzyme was assembled from pure proteins onto a primer template scaffold. The assembly process could be divided into two stages. In the time-consuming first stage, beta subunit and gamma.delta subunit complex were required in forming a tightly bound ATP-activated "preinitiation complex" with a single-stranded DNA bacteriophage circle uniquely primed with a synthetic pentadecadeoxyribonucleotide. This finding substantiates an earlier study using crude protein preparations in a homopolymer system lacking Escherichia coli single-stranded DNA binding protein (Wickner, S. (1976) Proc. Natl. Acad. Sci. U. S. A. 73, 3511-3515). In the second stage, the polymerase III core and the tau subunit rapidly seek out and bind the preinitiation complex to form DNA polymerase III holoenzyme capable of rapid and entirely processive replication of the circular DNA. ATP is not required beyond formation of the preinitiation complex. It is remarkable that the fully assembled DNA polymerase III holoenzyme is so stably bound to the primed DNA circle (4-min half-time of dissociation), yet upon completing a round of synthesis the polymerase cycles within 10 s to a new preinitiation complex on a challenge primed DNA circle. Efficient polymerase cycling only occurred when challenge primed DNA was endowed with a preinitiation complex implying that cycling is mediated by a polymerase subassembly which dissociates from its accessory proteins and associates with a new preinitiation complex. These subunit dynamics suggest mechanisms for polymerase cycling on the lagging strand of replication forks in a growing chromosome.     

The beta subunit of the Escherichia coli DNA polymerase III holoenzyme interacts functionally with the catalytic core in the absence of other subunits

We have previously demonstrated that the addition of a stoichiometric excess of the beta subunit of Escherichia coli DNA polymerase III holoenzyme to DNA polymerase III or holoenzyme itself can lead to an ATP-independent increase in the processivity of these enzyme forms (Crute, J. J., LaDuca, R. J., Johanson, K. O., McHenry, C. S., and Bambara, R. A. (1983) J. Biol. Chem. 258, 11344-11349). Here, we show that the beta subunit can interact directly with the catalytic core of the holoenzyme, DNA polymerase III, generating a new form of the enzyme with enhanced catalytic and processive capabilities. The addition of saturating levels of the beta subunit to the core DNA polymerase III enzyme results in as much as a 7-fold stimulation of synthetic activity. Two populations of DNA products were generated by the DNA polymerase III X beta enzyme complex. Short products resulting from the addition of 5-10 nucleotides/primer fragment were generated by DNA polymerase III in the presence and absence of added beta subunit. A second population of much longer products was generated only in beta-supplemented DNA polymerase III reactions. The DNA polymerase III-beta reaction was inhibited by single-stranded DNA binding protein and was unaffected by ATP, distinguishing it from the holoenzyme-catalyzed reaction. Complex formation of the DNA polymerase III core enzyme with beta increased the residence time of the enzyme on synthetic DNA templates. Our results demonstrate that the beta stimulation of DNA polymerase III can be attributed to a more efficient and highly processive elongation capability of the DNA polymerase III X beta complex. They also prove that at least part of beta's normal contribution to the DNA polymerase III holoenzyme reaction takes place through interaction with DNA polymerase III core enzyme components to produce the essential complex necessary for efficient elongation in vivo.     

Properties of initiation complexes formed between Escherichia coli DNA polymerase III holoenzyme and primed DNA in the absence of ATP

In the presence of ATP, the beta subunit of the Escherichia coli DNA polymerase III holoenzyme can induce a stable initiation complex with the other holoenzyme subunits and primed DNA that is capable of highly processive synthesis. We have recently demonstrated that the ATP requirement for processive synthesis can be bypassed by an excess of the beta subunit (Crute, J., LaDuca, R., Johanson, K., McHenry, C., and Bambara, R. (1983) J. Biol. Chem. 258, 11344-11349). To examine the complex formed with excess beta subunit, and the lengths of the products of processive synthesis, we have designed a uniquely primed DNA template. Poly(dA)4000 was tailed with dCTP by terminal deoxynucleotidyl transferase and the resulting template annealed to oligo(dG)12-18. In the presence of excess beta, the lengths of processively extended primers nearly equaled the full-length of the DNA template. Similar length synthesis occurred in the presence or absence of spermidine or single-stranded DNA-binding protein. When the beta subunit was present at normal holoenzyme stoichiometry it could induce highly processive synthesis without ATP, although inefficiently. Both ATP and excess beta increased the amount of initiation complex formation, but complexes produced with excess beta did so without the time delay observed with ATP, suggesting different mechanisms for formation. Almost 50% of initiation complexes formed without ATP survived a 30-min incubation with anti-beta IgG, reflecting a stability similar to those formed with ATP. The ability to form initiation complexes in the absence of ATP permitted the demonstration that cycling of the holoenzyme to a new primer, after chain termination with a dideoxynucleotide, is not affected by the presence of ATP.     

ATP interactions of the tau and gamma subunits of DNA polymerase III holoenzyme of Escherichia coli

The tau and gamma subunits of the DNA polymerase III holoenzyme of Escherichia coli were each isolated in large quantities as oligomers from overproducing cells in which their genes (dnaZ and X) were under the control of a T7 phage promoter. The 52-kDa gamma subunit (encoded by the dnaZ sequence) contains three-forths of the N-terminal residues of the 71-kDa tau subunit (encoded by the dnaX sequence). Both gamma and tau share a binding site for ATP (or dATP). A DNA-dependent ATPase activity (Lee, S.H., and Walker, J.R. (1987) Proc. Natl. Acad. Sci. U. S. A. 84, 2713-2717) exhibited only by the tau subunit, presumably requires a DNA-binding site in the C-terminal domain lacking in the gamma subunit. Among ATPases dependent on single-stranded DNA, the tau activity is remarkable in the failure of homopolymers (e.g. poly(dA) or poly(dT)) to replace natural DNAs. The presumed need for certain secondary structures may reflect a feature of template binding in the crucial contribution that tau makes to the high processivity of polymerase III holoenzyme. Limited tryptic digestion of tau generates a fragment that resembles gamma in: (i) size, (ii) binding of ATP without ATPase activity, and (iii) a level of complementing holoenzyme activity in extracts of dnaZ-mutant cells that is higher than that of tau.     

Adenosine 5'-O-(3-thiotriphosphate) can support the formation of an initiation complex between the DNA polymerase III holoenzyme and primed DNA

Adenosine 5'-O-(3-thiotriphosphate) (ATP gamma S) will substitute for ATP in the formation of an initiation complex between the DNA polymerase III holoenzyme of Escherichia coli and primed DNA. The initiation complex formed in the presence of ATP gamma S between the DNA polymerase III holoenzyme and single-stranded DNA-binding protein-encoated primed M13 Gori DNA is stabile and isolable by gel filtration at room temperature. Upon addition of the four required deoxynucleoside triphosphates, this complex is rapidly converted to the duplex replicative form without dissociation of the polymerase. Initiation complexes formed in the presence of either ATP gamma S or ATP are indistinguishable by their resistance to antibody directed against the beta subunit of the holoenzyme and by their ability to elongate without further activation. A 2-fold difference was observed, however, in both the extent of initiation complex formation and in the dissociation of initiation complexes once formed. This difference is discussed in the light of previous proposals regarding a dimeric polymerase capable of replicating both strands at a replication fork concurrently.     

Fluorescence energy transfer between the primer and the beta subunit of the DNA polymerase III holoenzyme.

We report here our initial success in using fluorescence energy transfer to map the position of the subunits of the DNA polymerase III holoenzyme within initiation complexes formed on primed DNA. Using primers containing a fluorescent derivative 3 nucleotides from the 3'-terminus and acceptors of fluorescence energy transfer located on Cys333 of the beta subunit, a donor-acceptor distance of 65 A was measured. Coupling this distance with other information enabled us to propose a model for the positioning of beta within initiation complexes. Examination of the fluorescence properties of a labeled primer with the unlabeled beta subunit and other assemblies of DNA polymerase III holoenzyme subunits allowed us to distinguish all of the known intermediates of the holoenzyme-catalyzed reaction. Specific fluorescence changes could be assigned for primer annealing, Escherichia coli single-stranded DNA-binding protein binding, 3'----5' exonucleolytic hydrolysis of the primer, DNA polymerase III* binding, initiation complex formation upon the addition of beta in the presence of ATP, and DNA elongation. These fluorescence changes are sufficiently large to support future detailed kinetic studies. Particularly interesting was the difference in fluorescence changes accompanying initiation complex formation as compared to binding of DNA polymerase III holoenzyme subunit assemblies. Initiation complex formation resulted in a strong fluorescence enhancement. Binding of DNA polymerase III* led to a fluorescence quenching, and transfer of beta to primed DNA by the gamma delta complex did not change the fluorescence. This demonstrates a rearrangement of subunits accompanying initiation complex formation. Monitoring fluorescence changes with labeled beta, we have determined that beta binds with a stoichiometry of one monomer/primer terminus.     

Characterization of 2'(3')-trinitrophenyl-ATP as an inhibitor of ATP-dependent initiation complex formation between the DNA polymerase III holoenzyme and primed DNA

We have identified 2'(3')-trinitrophenyl-ATP to be an inhibitor of the ATP-dependent initiation complex formation reaction between the Escherichia coli DNA polymerase III holoenzyme and primed DNA. The inhibitor is specific for the initiation stage; once initiation complexes are formed the subsequent elongation reaction is unaffected. Three ATP-dependent DNA polymerase III holoenzyme reactions can be independently assayed: the ATP-dependent formation of initiation complexes, ATP binding, and the primed DNA-dependent hydrolysis of ATP. Trinitrophenyl ATP inhibits all three reactions to a similar extent with an apparent Ki between 6 and 15 microM in the presence of 5 microM ATP. This suggests all of these reactions are related and that they proceed through a common ATP-binding site. We include an improved purification of the DNA polymerase III holoenzyme in this report.     

The delta subunit of DNA polymerase III holoenzyme serves as a sliding clamp unloader in Escherichia coli

In Escherichia coli, the circular beta sliding clamp facilitates processive DNA replication by tethering the polymerase to primer-template DNA. When synthesis is complete, polymerase dissociates from beta and DNA and cycles to a new start site, a primed template loaded with beta. DNA polymerase cycles frequently during lagging strand replication while synthesizing 1-2-kilobase Okazaki fragments. The clamps left behind remain stable on DNA (t(12) approximately 115 min) and must be removed rapidly for reuse at numerous primed sites on the lagging strand. Here we show that delta, a single subunit of DNA polymerase III holoenzyme, opens beta and slips it off DNA (k(unloading) = 0.011 s(-)(1)) at a rate similar to that of the multisubunit gamma complex clamp loader by itself (0.015 s(-)(1)) or within polymerase (pol) III* (0.0065 s(-)(1)). Moreover, unlike gamma complex and pol III*, delta does not require ATP to catalyze clamp unloading. Quantitation of gamma complex subunits (gamma, delta, delta', chi, psi) in E. coli cells reveals an excess of delta, free from gamma complex and pol III*. Since pol III* and gamma complex occur in much lower quantities and perform several DNA metabolic functions in replication and repair, the delta subunit probably aids beta clamp recycling during DNA replication.     

DNA polymerase III holoenzyme of Escherichia coli. III. Distinctive processive polymerases reconstituted from purified subunits

The 10 distinctive polypeptides of DNA polymerase III holoenzyme, purified as individual subunits or complexes, could be reconstituted to generate a polymerase with the high catalytic rate of the isolated intact holoenzyme. Functions and interactions of the subunits can be inferred from partial assemblies of the pol III core (alpha, epsilon, and theta subunits) with auxiliary subunits. The core possesses the polymerase and proofreading activities; the auxiliary subunits provide the core with processivity, the capacity to replicate long stretches of DNA without dissociating from the template. In a sequence of reconstruction steps, the beta subunit binds the primed template in an ATP-dependent manner through the catalytic action of a complex made up of the gamma, delta, delta', chi, and psi polypeptides. With the beta subunit in place, a processive polymerase is produced upon addition of the core. When the tau subunit is lacking, binding of polymerase to the primed template is less efficient and stable. The tau-less reconstituted polymerase is more prone to dissociation upon encountering secondary structures in the template in its path, such as a hairpin region in the single strand or a duplex region formed by a strand annealed to the template. With the tau subunit present, the interaction of the core.beta complex (the basic unit of a processive polymerase) with the primed template is strengthened. The tau-containing reconstituted polymerase can replicate DNA continuously through secondary structures in the template. The two distinctive kinds of processivity demonstrated by the tau-less and tau-containing reconstituted polymerases fit nicely into a scheme in which, organized as an asymmetric dimeric holoenzyme, the tau half is responsible for continuous synthesis of one strand, and the less stable half for discontinuous synthesis of the other.     

Devoted to the lagging strand-the subunit of DNA polymerase III holoenzyme contacts SSB to promote processive elongation and sliding clamp assembly.

Escherichia coli DNA polymerase III holoenzyme contains 10 different subunits which assort into three functional components: a core catalytic unit containing DNA polymerase activity, the beta sliding clamp that encircles DNA for processive replication, and a multisubunit clamp loader apparatus called gamma complex that uses ATP to assemble the beta clamp onto DNA. We examine here the function of the psi subunit of the gamma complex clamp loader. Omission of psi from the holoenzyme prevents contact with single-stranded DNA-binding protein (SSB) and lowers the efficiency of clamp loading and chain elongation under conditions of elevated salt. We also show that the product of a classic point mutant of SSB, SSB-113, lacks strong affinity for psi and is defective in promoting clamp loading and processive replication at elevated ionic strength. SSB-113 carries a single amino acid replacement at the penultimate residue of the C-terminus, indicating the C-terminus as a site of interaction with psi. Indeed, a peptide of the 15 C-terminal residues of SSB is sufficient to bind to psi. These results establish a role for the psi subunit in contacting SSB, thus enhancing the clamp loading and processivity of synthesis of the holoenzyme, presumably by helping to localize the holoenzyme to sites of SSB-coated ssDNA.     

Purification and characterization of an inducible Escherichia coli DNA polymerase capable of insertion and bypass at abasic lesions in DNA

We have investigated the ability of DNA polymerases from SOS-induced and uninduced Escherichia coli to incorporate nucleotides at a well-defined abasic (apurinic/apyrimidinic) DNA template site and to extend these chains from this unpaired 3' terminus. A DNA polymerase activity has been purified from E. coli, deleted for DNA polymerase I, that appears to be induced 7-fold in cells following treatment with nalidixic acid. Induction of this polymerase (designated DNA polymerase X) appears to be part of the SOS response of E. coli since it cannot be induced in strains containing a noncleavable form of the LexA repressor (Ind-). The enzyme is able to incorporate nucleotides efficiently opposite the abasic template lesion and to continue DNA synthesis. Although we observe an approximate 2-fold induction of DNA polymerase III in cells treated with nalidixic acid, several lines of evidence argue that DNA polymerase X is unrelated to DNA polymerase III (pol III). In contrast to pol X, pol III shows almost no detectable ability to incorporate at or extend beyond the abasic site; incorporation efficiency at the abasic lesion is at least 100-fold larger for pol X compared to pol III holoenzyme, pol III core, or pol III* (the polymerase III holoenzyme subassembly lacking the beta subunit). Pol X does not cross-react with polyclonal antibody directed against pol III holoenzyme complex or with monoclonal antibody prepared to the alpha subunit of pol III. Despite these structural and biochemical differences, pol X appears to interact specifically with the beta subunit of the pol III holoenzyme in the presence of single-stranded binding protein. Pol X has a molecular mass of 84 kDa. Our results indicate that this novel activity is likely to be identical to DNA polymerase II of E. coli.     

Prereplicative complexes of components of DNA polymerase III holoenzyme of Escherichia coli.

Stepwise reconstitution of the subunits of DNA polymerase III holoenzyme of Escherichia coli offers insights into the organization and function of this multisubunit assembly. A highly processive, holoenzyme-like activity can be generated when the gamma complex, in the presence of ATP and a primed template, activates the beta subunit to form a preinitiation complex, and this is then followed by addition of the core polymerase. Further analysis of early replicative complexes has now revealed: 1) that the gamma complex can stably bind a single-stranded DNA binding protein (SSB)-coated template, 2) that neither SSB coating of the template nor a proper primer terminus is required to form the preinitiation complex, and 3) that the gamma complex stabilizes the preinitiation complex in the presence of ATP and destabilizes it in the presence of adenosine 5'-O-(thiotriphosphate). Based on these findings, a sequence of stages can be formulated for an activation of the beta subunit that enables it to bind the template-primer and thereby interact with the core to create a processive polymerase.     

DNA Polymerase III holoenzyme of Escherichia coli. IV. The holoenzyme is an asymmetric dimer with twin active sites

Pol III, a subassembly of Escherichia coli DNA polymerase III holoenzyme lacking only the auxiliary beta subunit, was purified to homogeneity by an improved procedure. This assembly consists of nine different polypeptides, likely in a 1:1 stoichiometry: a catalytic core (pol III) of alpha (132 kDa), epsilon (27 kDa), and theta (10 kDa), and six auxiliary subunits: tau (71 kDa), gamma (52 kDa), delta (35 kDa), delta' (33 kDa), chi (15 kDa), and psi (12 kDa). The assembly behaves on gel filtration as a particle of about 800 kDa, indicating a content of two each of the subunits. A new procedure for purifying the core yielded a novel dimeric form which may provide the foundation for the dimeric nature of the more complex pol III and holoenzyme forms. Pol III readily dissociates into several subassemblies including pol III', likely a dimeric core with two tau subunits. The holoenzyme, purified by a similar procedure with ATP and Mg2+ present throughout, retained the beta subunit (37 kDa) as well as all the subunits present in pol III; the mass of the holoenzyme was estimated to be 900 kDa. The isolated initiation complex of holoenzyme with a primed template DNA and the elongation complex (formed in the presence of three deoxynucleoside triphosphates) had the same composition and stoichiometry as observed for pol III with two beta dimers in addition. An initiation complex assembled from a mixture of monomeric pol III core, gamma 2 delta delta' chi psi complex (gamma complex), beta, and tau retained the core, one beta dimer, and two tau subunits but was deficient in the gamma complex. When tau was omitted from the assembly mixture, the initiation complex contained one or two gamma complexes instead of the tau subunit. Based on these data, pol III holoenzyme is judged to be an asymmetric dimeric particle with twin pol III core active sites and two different sets of auxiliary units designed to achieve essentially concurrent replication of both leading and lagging strand templates.     

The polymerase subunit of DNA polymerase III of Escherichia coli. I. Amplification of the dnaE gene product and polymerase activity of the alpha subunit

The Escherichia coli dnaE gene, which encodes the alpha subunit of DNA polymerase III (pol III) holoenzyme, has been cloned in a plasmid containing the PL promoter of phage lambda and thermally induced to overproduce the alpha subunit. In cells carrying this plasmid (pKH167), the alpha subunit was amplified, after heat induction, to a level of about 0.2% of the total cellular protein. Polymerase activity was assayed in three ways: (i) gap-filling by pol III holoenzyme and subassemblies of it, (ii) the extensive replication of a primed, single-stranded DNA circle only by pol III holoenzyme, and (iii) complementation of a crude, inactive pol III holoenzyme (temperature-sensitive dnaE mutant fraction) in replication of a primed, single-stranded DNA circle. Amplification of the alpha subunit raised the polymerase level 10-fold in assay (i), indicative of the dependence of pol III gap-filling activity on this polypeptide; pol III holoenzyme activity remained unaffected (assay (ii)), but the complementation activity was raised 5-fold (assay (iii)). Thus, the elevated alpha subunit (free or in a subassembly form) can substitute in vitro for a defective alpha subunit in pol III holoenzyme, but cannot increase the in vivo level of about eight pol III holoenzyme molecules per cell. This low level of pol III holoenzyme is fixed in wild type cells (bearing no plasmid) despite the presence of a 5-fold excess of the alpha subunit, as inferred from the various assays. These results suggest that the low level of pol III holoenzyme is determined by a factor or factors other than the level of the alpha subunit.