ATP-induced FliI hexamerization facilitates bacterial flagellar protein export

FliI ATPase forms a homo-hexamer to fully exert its ATPase activity, facilitating bacterial flagellar protein export. However, it remains unknown how FliI hexamerization is linked to protein export. Here, we analyzed the capability of ring formation by FliI and its catalytic mutant variants. Compared to ATP a non-hydrolysable ATP analog increased the probability of FliI hexamerization. In contrast, FliI(E221Q), which retained the affinity for ATP but has lost ATPase activity, efficiently formed the hexamer even in the presence of ATP. The mutations, which reduced the binding affinity for ATP, significantly abolished the ring formation. These results indicate that ATP-binding induces FliI hexamerization and that the release of ADP and Pi destabilizes the ring structure. FliI(E221Q) facilitated flagellar protein export in the absence of the FliH regulator of the export apparatus although not at the wild-type FliI level while the other did not. We propose that FliI couples ATP binding and hydrolysis to its assembly-disassembly cycle to efficiently initiate the flagellar protein export cycle.     

Intrinsic membrane targeting of the flagellar export ATPase FliI: interaction with acidic phospholipids and FliH

The specialised ATPase FliI is central to export of flagellar axial protein subunits during flagellum assembly. We establish the normal cellular location of FliI and its regulatory accessory protein FliH in motile Salmonella typhimurium, and ascertain the regions involved in FliH(2)/FliI heterotrimerisation. Both FliI and FliH localised to the cytoplasmic membrane in the presence and in the absence of proteins making up the flagellar export machinery and basal body. Membrane association was tight, and FliI and FliH interacted with Escherichia coli phospholipids in vitro, both separately and as the preformed FliH(2)/FliI complex, in the presence or in the absence of ATP. Yeast two-hybrid analysis and pull-down assays revealed that the C-terminal half of FliH (H105-235) directs FliH homodimerisation, and interacts with the N-terminal region of FliI (I1-155), which in turn has an intra-molecular interaction with the remainder of the protein (I156-456) containing the ATPase domain. The FliH105-235 interaction with FliI was sufficient to exert the FliH-mediated down-regulation of ATPase activity. The basal ATPase activity of isolated FliI was stimulated tenfold by bacterial (acidic) phospholipids, such that activity was 100-fold higher than when bound by FliH in the absence of phospholipids. The results indicate similarities between FliI and the well-characterised SecA ATPase that energises general protein secretion. They suggest that FliI and FliH are intrinsically targeted to the inner membrane before contacting the flagellar secretion machinery, with both FliH105-235 and membrane phospholipids interacting with FliI to couple ATP hydrolysis to flagellum assembly.     

Roles of the extreme N‐terminal region of FliH for efficient localization of the FliH–FliI complex to the bacterial flagellar type III export apparatus

Most bacterial flagellar proteins are exported by the flagellar type III protein export apparatus for their self‐assembly. FliI ATPase forms a complex with its regulator FliH and facilitates initial entry of export substrates to the export gate composed of six integral membrane proteins. The FliH–FliI complex also binds to the C ring of the basal body through a FliH–FliN interaction for efficient export. However, it remains unclear how these reactions proceed within the cell. Here, we analysed subcellular localization of FliI–YFP by fluorescence microscopy. FliI–YFP was localized to the flagellar base, and its localization required both FliH and the C ring. The ATPase activity of FliI was not required for its localization. FliI–YFP formed a complex with FliHΔ1 (missing residues 2–10) but the complex did not show any localization. FliHΔ1 did not interact with FliN, and alanine‐scanning mutagenesis revealed that only Trp‐7 and Trp‐10 of FliH are essential for the interaction with FliN. Overproduction of the FliH–FliI complex improved the export activity of the fliN mutant whereas neither of the FliH(W7A)‐FliI nor FliH(W10A)‐FliI complexes did, suggesting that Trp‐7 and Trp‐10 of FliH are also required for efficient localization of the FliH–FliI complex to the export gate.     

Interaction of FliI, a component of the flagellar export apparatus, with flagellin and hook protein.

FliI is a key component of the flagellar export apparatus in Salmonella typhimurium. It catalyzes the hydrolysis of ATP which is necessary for flagellar assembly. Affinity blotting experiments showed that purified flagellin and hook protein, two flagellar axial proteins, interact specifically with FliI. The interaction of either of the two proteins with FliI, increases the intrinsic ATPase activity. The presence of either flagellin or hook protein stimulates ATPase activity in a specific and reversible manner. A Vmax of 0.12 nmol Pi min-1 microgram-1 and a Km for MgATP of 0.35 mM was determined for the unstimulated FliI; the presence of flagellin increased the Vmax to 0.35 nmol Pi min-1 microgram-1 and the Km for MgATP to 1.1 mM. The stimulation induced by the axial proteins was fully reversible suggesting a direct link between the catalytic activity of FliI and the export process.     

Protein export through the bacterial flagellar type III export pathway

For construction of the bacterial flagellum, which is responsible for bacterial motility, the flagellar type III export apparatus utilizes both ATP and proton motive force across the cytoplasmic membrane and exports flagellar proteins from the cytoplasm to the distal end of the nascent structure. The export apparatus consists of a membrane-embedded export gate made of FlhA, FlhB, FliO, FliP, FliQ, and FliR and a water-soluble ATPase ring complex consisting of FliH, FliI, and FliJ. FlgN, FliS, and FliT act as substrate-specific chaperones that do not only protect their cognate substrates from degradation and aggregation in the cytoplasm but also efficiently transfer the substrates to the export apparatus. The ATPase ring complex facilitates the initial entry of the substrates into the narrow pore of the export gate. The export gate by itself is a proton-protein antiporter that uses the two components of proton motive force, the electric potential difference and the proton concentration difference, for different steps of the export process. A specific interaction of FlhA with FliJ located in the center of the ATPase ring complex allows the export gate to efficiently use proton motive force to drive protein export. The ATPase ring complex couples ATP binding and hydrolysis to its assembly–disassembly cycle for rapid and efficient protein export cycle. This article is part of a Special Issue entitled: Protein trafficking and secretion in bacteria. Guest Editors: Anastassios Economou and Ross Dalbey.     

The FliN-FliH interaction mediates localization of flagellar export ATPase FliI to the C ring complex

FliH regulates the flagellar export ATPase FliI, preventing nonproductive ATP hydrolysis. FliH has been shown to stably associate with the C ring protein FliN. Analysis of this complex reveals that FliH is required for FliI localization to the C ring, and thus FliH not only inhibits FliI ATPase activity but also may act to target FliI to the basal body. Quantitative binding studies revealed a KD of 110 nM for FliH binding to FliN. The KD for FliH binding of a FliN variant from a temperature-sensitive nonflagellate fliN point mutant was determined to be 270 nM, suggesting a molecular explanation for its phenotype. Another variant FliN from a temperature-sensitive mutant with a different phenotype displayed binding with an intermediate affinity. Weak export activity in a fliN null mutant was greatly increased by overproduction of FliI, mimicking a previously observed FliH bypass effect and supporting the conclusion that FliN-FliH binding is important for localization of FliI to the C ring and thus the membrane-embedded export apparatus beyond. A model incorporating the present findings is presented.     

Interaction of the Extreme N-Terminal Region of FliH with FlhA Is Required for Efficient Bacterial Flagellar Protein Export

The flagellar type III protein export apparatus plays an essential role in the formation of the bacterial flagellum. FliH forms a complex along with FliI ATPase and is postulated to provide a link between FliI ring formation and flagellar protein export. Two tryptophan residues of FliH, Trp7 and Trp10, are required for the effective docking of the FliH-FliI complex to the export gate made of six membrane proteins. However, it remains unknown which export gate component interacts with these two tryptophan residues. Here, we performed targeted photo-cross-linking of the extreme N-terminal region of FliH (FliH(EN)) with its binding partners. We replaced Trp7 and Trp10 of FliH with p-benzoyl-phenylalanine (pBPA), a photo-cross-linkable unnatural amino acid, to produce FliH(W7pBPA) and FliH(W10pBPA). They were both functional and were photo-cross-linked with one of the export gate proteins, FlhA, but not with the other gate proteins, indicating that these two tryptophan residues are in close proximity to FlhA. Mutant FlhA proteins that are functional in the presence of FliH and FliI but not in their absence showed a significantly reduced function also by N-terminal FliH mutations even in the presence of FliI. We suggest that the interaction of FliH(EN) with FlhA is required for anchoring the FliI hexamer ring to the export gate for efficient flagellar protein export.     

Interactions between C ring proteins and export apparatus components: a possible mechanism for facilitating type III protein export

The flagellar switch proteins of Salmonella, FliG, FliM and FliN, participate in the switching of motor rotation, torque generation and flagellar assembly/export. FliN has been implicated in the flagellar export process. To address this possibility, we constructed 10-amino-acid scanning deletions and larger truncations over the C-terminal domain of FliN. Except for the last deletion variant, all other variants were unable to complement a fliN null strain or to restore the export of flagellar proteins. Most of the deletions showed strong negative dominance effects on wild-type cells. FliN was found to associate with FliH, a flagellar export component that regulates the ATPase activity of FliI. The binding of FliM to FliN does not interfere with this FliN-FliH interaction. Furthermore, a five-protein complex consisting of FliG, His-tagged FliM, FliN, FliH and FliI was purified by nickel-affinity chromatography. FliJ, a putative general chaperone, is bound to FliM even in the absence of FliH. The importance of the C ring as a possible docking site for export substrates, chaperones and FliI through FliH for their efficient delivery to membrane components of the export apparatus is discussed.     

Oligomerization of the bacterial flagellar ATPase FliI is controlled by its extreme N-terminal region

Salmonella FliI is the flagellar ATPase which converts the energy of ATP hydrolysis into the export of flagellar proteins. It forms a ring-shaped oligomer in the presence of ATP, its analogs, or phospholipids. The extreme N-terminal region of FliI has an unstable conformation and is responsible for the interaction with other components of the export apparatus and for regulation of the catalytic mechanism. To understand the role of this N-terminal region in more detail, we used multi-angle light-scattering, analytical ultracentrifugation, far-UV CD and biochemical methods to characterize a partially functional variant of FliI, missing its first seven amino acid residues (His-FliI(Delta1-7)), whose ATPase activity is about ten times lower than that of wild-type FliI. His-FliI(Delta1-7) is monomeric in solution. The deletion increased the content of alpha-helix, suggesting that the deletion stabilizes the unstable N-terminal region into an alpha-helical conformation. The deletion did not influence the K(m) value for ATP. However, unlike the wild-type, ATP and acidic phospholipids did not induce oligomerization of His-FliI(Delta1-7) or increase its ATPase activity. These results suggest that the deletion suppresses the oligomerization of FliI, and that a conformational change in the unstable N-terminal region is required for FliI oligomerization to effectively couple the energy of ATP hydrolysis to the translocation of flagellar proteins.     

The ATPase FliI can interact with the type III flagellar protein export apparatus in the absence of its regulator,FliH

Salmonella FliI is the ATPase that drives flagellar protein export. It normally exists as a complex together with the regulatory protein FliH. A fliH null mutant was slightly motile, with overproduction of FliI resulting in substantial improvement of its motility. Mutations in the cytoplasmic domains of FlhA and FlhB, which are integral membrane components of the type III flagellar export apparatus, also resulted in substantially improved motility, even at normal FliI levels. Thus, FliH, though undoubtedly important, is not essential.     

Genetic and biochemical analysis of Salmonella typhimurium FliI, a flagellar protein related to the catalytic subunit of the F0F1 ATPase and to virulence proteins of mammalian and plant pathogens.

FliI is a Salmonella typhimurium protein that is needed for flagellar assembly and may be involved in a specialized protein export pathway that proceeds without signal peptide cleavage. FliI shows extensive sequence similarity to the catalytic beta subunit of the F0F1 ATPase (A. P. Volger, M. Homma, V. M. Irikura, and R. M. Macnab, J. Bacteriol. 173:3564-3572, 1991). It is even more similar to the Spa47 protein of Shigella flexneri (M. M. Venkatesan, J. M. Buysse, and E. V. Oaks, J. Bacteriol. 174:1990-2001, 1992) and the HrpB6 protein of Xanthomonas campestris (S. Fenselau, I. Balbo, and U. Bonas, Mol. Plant-Microbe Interact. 5:390-396, 1992), which are believed to play a role in the export of virulence proteins. Site-directed mutagenesis of residues in FliI that correspond to catalytically important residues in the F1 beta subunit resulted in loss of flagellation, supporting the hypothesis that FliI is an ATPase. FliI was overproduced and purified almost to homogeneity. It demonstrated ATP binding but not hydrolysis. An antibody raised against FliI permitted detection of the protein in wild-type cells and an estimate of about 1,500 subunits per cell. An antibody directed against the F1 beta subunit of Escherichia coli cross-reacted with FliI, confirming that the proteins are structurally related. The relationship between three proteins involved in flagellar assembly (FliI, FlhA, and FliP) and homologs in a variety of virulence systems is discussed.     

EscO,a Functional and Structural Analog of the Flagellar FliJ Protein,Is a Positive Regulator of EscN ATPase Activity of the Enteropathogenic Escherichia coli Injectisome

Type III secretion systems (T3SSs) are multiprotein molecular devices used by many Gram-negative bacterial pathogens to translocate effector proteins into eukaryotic cells. A T3SS is also used for protein export in flagellar assembly, which promotes bacterial motility. The two systems are evolutionarily related, possessing highly conserved components in their export apparatuses. Enteropathogenic Escherichia coli (EPEC) employs a T3SS, encoded by genes in the locus of enterocyte effacement (LEE) pathogenicity island, to colonize the human intestine and cause diarrheal disease. In the present work, we investigated the role of the LEE-encoded EscO protein (previously Orf15 or EscA) in T3SS biogenesis. We show that EscO shares similar properties with the flagellar FliJ and the Yersinia YscO protein families. Our findings demonstrate that EscO is essential for secretion of all categories of T3SS substrates. Consistent with its central role in protein secretion, it was found to interact with the ATPase EscN and its negative regulator, EscL, of the export apparatus. Moreover, we show that EscO stimulates EscN enzymatic activity; however, it is unable to upregulate ATP hydrolysis in the presence of EscL. Remarkably, EscO partially restored the swimming defect of a Salmonella flagellar fliJ mutant and was able to stimulate the ATPase activity of FliI. Overall, our data indicate that EscO is the virulence counterpart of the flagellar FliJ protein.     

Mechanisms of type III protein export for bacterial flagellar assembly

Flagellar type III protein export is highly organized and well controlled in a timely manner by dynamic, specific and cooperative interactions among components of the export apparatus, allowing the huge and complex macromolecular assembly to be built efficiently. The bacterial flagellum, which is required for motility, consists of a rotary motor, a universal joint and a helical propeller. Most of the flagellar components are translocated to the distal, growing end of the flagellum for assembly through the central channel of the flagellum itself by the flagellar type III protein export apparatus, which is postulated to be located on the cytoplasmic side of the flagellar basal body. The export specificity switching machinery, which consists of at least two proteins that function as a molecular ruler and an export switch, respectively, monitors the state of hook-basal body assembly in the cell exterior and switches export specificity, thereby coupling sequential flagellar gene expression with the flagellar assembly process. The export ATPase complex composed of an ATPase and its regulator acts as a pilot to deliver its export substrate to the export gate and helps initial entry of the substrate N-terminal chain into a narrow pore of the export gate. The energy of ATP hydrolysis appears to be used to disassemble and release the ATPase complex from the protein about to be exported, and the rest of the successive unfolding/translocation process of the long polypeptide chain is driven solely by proton motive force (PMF), perhaps through biased one-dimensional Brownian diffusion. Interestingly, the subunits of the ATPase complex have significant sequence similarities to subunits of F(0)F(1)-ATP synthase, a rotary motor that drives the chemical reaction of ATP synthesis using PMF, and the entire crystal structure of the export ATPase is extremely similar to the alpha/beta subunits of F(0)F(1)-ATP synthase, suggesting that the flagellar export apparatus and F(0)F(1)-ATP synthase share the mechanism for their two distinct functions.     

Interaction between FliI ATPase and a flagellar chaperone FliT during bacterial flagellar protein export

FliT is a flagellar type III export chaperone specific for the filament-capping protein FliD. The FliT/FliD complex binds to the FliI ATPase of the flagellar export apparatus. The C-terminal α4 helix of FliT controls its interaction with FliI but it remains unknown how it does so. Here, we analysed the FliI-FliT interaction by pull-down assays using GST affinity chromatography. FliT94, missing the C-terminal α4 helix, bound to the extreme N-terminal region of FliI (FliI(EN)) with high affinity and to the C-terminal ATPase domain (FliI(CAT)) with low affinity. The C-terminal α4 helix of FliT suppressed the interaction with FliI(EN). FliH and FliT94 bound to a common binding site on FliI(EN) and hence FliH induced the release of FliI from FliT94 in an ATP-independent manner. FliD increased the binding affinity of FliI(CAT) for FliT. These results raise a possible hypothesis that the FliH/FliI complex binds to the FliT/FliD complex through FliI(CAT) to escort it from the cytoplasm to the export gate made up of six integral membrane proteins and that, upon dissociation of FliD from FliT, FliT94 may bind to FliI(EN) and then FliI may transfer from FliT94 to FliH by the direct competition of FliT94 and FliH for FliI(EN).     

Sorting of early and late flagellar subunits after docking at the membrane ATPase of the type III export pathway

The bacterial flagellum assembles in a strict order, with structural subunits delivered to the growing flagellum by a type III export pathway. Early rod-and-hook subunits are exported before completion of the hook, at which point a subunit-specificity switch allows export of late filament subunits. This implies that in bacteria with multiple flagella at different stages of assembly, each export pathway can discriminate and sort unchaperoned early and chaperoned late subunits. To establish whether subunit sorting is distinct from subunit transition from the cytosol to the membrane, in particular docking at the membrane-associated FliI ATPase, the pathway was manipulated in vivo. When ATP hydrolysis by the FliI ATPase was disabled and when the pathway was locked into an early export state, both unchaperoned early and chaperoned late subunits stalled and accumulated at the inner membrane. Furthermore, a chaperone that attenuates late subunit export by stalling when docked at the wild-type ATPase also stalled at the ATPase in an early-locked pathway and inhibited export of early subunits in both native and early-locked pathways. These data indicate that the pathways for early and late subunits converge at the FliI ATPase, independent of ATP hydrolysis, before a distinct, separable sorting step. To ascertain the likely signals for sorting, the export of recombinant subunits was assayed. Late filament subunits unable to bind their chaperones were still sorted accurately, but chaperoned late subunits were directed through an early-locked pathway when fused to early subunit N-terminal export signal regions. Furthermore, while an early subunit signal directed export of a heterologous type III export substrate through both native and early-locked pathways, a late subunit signal only directed export via native pathways. These data suggest that subunits are distinguished not by late chaperones but by N-terminal export signals of the subunits themselves.     

Self-assembly and type III protein export of the bacterial flagellum

The bacterial flagellum is a supramolecular structure consisting of a basal body, a hook and a filament. Most of the flagellar components are translocated across the cytoplasmic membrane by the flagellar type III protein export apparatus in the vicinity of the flagellar base, diffuse down the narrow channel through the nascent structure and self-assemble at its distal end with the help of a cap structure. Flagellar proteins synthesized in the cytoplasm are targeted to the export apparatus with the help of flagellum-specific chaperones and pushed into the channel by an ATPase, whose activity is controlled by its regulator to enable the energy of ATP hydrolysis to be efficiently coupled to the translocation reaction. The export apparatus switches its substrate specificity by monitoring the state of flagellar assembly in the cell exterior, allowing this huge and complex macromolecular assembly to be built efficiently by a highly ordered and well-regulated assembly process.     

Genetic characterization of conserved charged residues in the bacterial flagellar type III export protein FlhA

For assembly of the bacterial flagellum, most of flagellar proteins are transported to the distal end of the flagellum by the flagellar type III protein export apparatus powered by proton motive force (PMF) across the cytoplasmic membrane. FlhA is an integral membrane protein of the export apparatus and is involved in an early stage of the export process along with three soluble proteins, FliH, FliI, and FliJ, but the energy coupling mechanism remains unknown. Here, we carried out site-directed mutagenesis of eight, highly conserved charged residues in putative juxta- and trans-membrane helices of FlhA. Only Asp-208 was an essential acidic residue. Most of the FlhA substitutions were tolerated, but resulted in loss-of-function in the ΔfliH-fliI mutant background, even with the second-site flhB(P28T) mutation that increases the probability of flagellar protein export in the absence of FliH and FliI. The addition of FliH and FliI allowed the D45A, R85A, R94K and R270A mutant proteins to work even in the presence of the flhB(P28T) mutation. Suppressor analysis of a flhA(K203W) mutation showed an interaction between FlhA and FliR. Taken all together, we suggest that Asp-208 is directly involved in PMF-driven protein export and that the cooperative interactions of FlhA with FlhB, FliH, FliI, and FliR drive the translocation of export substrate.     

A structural feature in the central channel of the bacterial flagellar FliF ring complex is implicated in type III protein export

The FliF ring complex, which consists of the M-S ring and a proximal portion of the rod of the flagellar basal body, is the base structure for the bacterial flagellar assembly. The FliF ring is also thought to be part of the export apparatus for flagellar proteins from its amino acid sequence homology to proteins involved in type III protein export systems. We established a new purification procedure for the FliF ring particles and carried out electron microscopic image analyses in their two distinct forms: well-dispersed single particles in the presence of salt and ordered monolayer arrays of hexagonal packing formed in the absence of salt. In both cases, the axial projection maps showed a common feature, a pair of concentric rings: the inner ring corresponds to the proximal rod; the outer ring represents the thick, edge portion of the M-S ring. However, the central channel of the FliF ring, the putative pathway for the flagellar protein export, appeared to show distinct structural features in the two forms. This suggests that a domain of FliF partially occupies the central channel to be involved in the export and gate mechanism, and the domain changes its conformation depending on the ionic strength.     

Interaction between FliJ and FlhA,Components of the Bacterial Flagellar Type III Export Apparatus

A soluble protein, FliJ, along with a membrane protein, FlhA, plays a role in the energy coupling mechanism for bacterial flagellar protein export. The water-soluble FliH_X-FliI₆ ATPase ring complex allows FliJ to efficiently interact with FlhA. However, the FlhA binding site of FliJ remains unknown. Here, we carried out genetic analysis of a region formed by well-conserved residues—Gln38, Leu42, Tyr45, Tyr49, Phe72, Leu76, Ala79, and His83—of FliJ. A structural model of the FliI₆-FliJ ring complex suggests that they extend out of the FliI₆ ring. Glutathione S-transferase (GST)-FliJ inhibited the motility of and flagellar protein export by both wild-type cells and a fliH-fliI flhB(P28T) bypass mutant. Pulldown assays revealed that the reduced export activity of the export apparatus results from the binding of GST-FliJ to FlhA. The F72A and L76A mutations of FliJ significantly reduced the binding affinity of FliJ for FlhA, thereby suppressing the inhibitory effect of GST-FliJ on the protein export. The F72A and L76A mutations were tolerated in the presence of FliH and FliI but considerably reduced motility in their absence. These two mutations affected neither the interaction with FliI nor the FliI ATPase activity. These results suggest that FliJ(F72A) and FliJ(L76A) require the support of FliH and FliI to exert their export function. Therefore, we propose that the well-conserved surface of FliJ is involved in the interaction with FlhA.     

Flagellar Formation in C-Ring-Defective Mutants by Overproduction of FliI,the ATPase Specific for Flagellar Type III Secretion

The flagellar cytoplasmic ring (C ring), which consists of three proteins, FliG, FliM, and FliN, is located on the cytoplasmic side of the flagellum. The C ring is a multifunctional structure necessary for flagellar protein secretion, torque generation, and switching of the rotational direction of the motor. The deletion of any one of the fliG, fliM, and fliN genes results in a Fla⁻ phenotype. Here, we show that the overproduction of the flagellum-specific ATPase FliI overcomes the inability of basal bodies with partial C-ring structures to produce complete flagella. Flagella made upon FliI overproduction were paralyzed, indicating that an intact C ring is essential for motor function. In FliN- or FliM-deficient mutants, flagellum production was about 10% of the wild-type level, while it was only a few percent in FliG-deficient mutants, suggesting that the size of partial C rings affects the extent of flagellation. For flagella made in C-ring mutants, the hook length varied considerably, with many being markedly shorter or longer than that of the wild type. The broad distribution of hook lengths suggests that defective C rings cannot control the hook length as tightly as the wild type even though FliK and FlhB are both intact.The flagellum is the ultrastructure for motility in many bacterial species (1). Flagellar assembly requires about 50 genes, among which about 20 gene products are incorporated in the complete flagellum (12). Most structural proteins and others necessary for assembly are exported through a flagellum-specific type III secretion apparatus housed within the basal body. The apparatus consists of at least six integral membrane proteins: FlhA, FlhB, FliP, FliQ, FliR, and FliO (for salmonellae and other species) (1, 12). Other proteins are also involved. FliI is the only known ATPase among flagellar proteins (2). FliI interacts with FliJ, which is of unknown function, and with a dimer of FliH, an inhibitor of FliI. The apparatus can be visualized by quick-freeze electron microscopy and has been termed the C (cytoplasmic) rod by virtue of its appearance and membrane-proximal location inside the C ring (7). The C ring is composed of three component proteins: FliG, FliM, and FliN (3). Mutations or deletions of any of these proteins cause a nonflagellate (Fla⁻) phenotype, strongly suggesting that the C ring is necessary for flagellar protein export (6, 22, 26). The trimer FliH₂-FliI specifically binds FliN (4, 15), suggesting that FliI docks at the periphery of the C ring through interactions with FliN-bound FliH, standing ready to escort export substrates to the secretion gate that is probably composed by FlhA, FlhB, and others (15).The C ring has long been studied with respect to motor function rather than export function. It has been proposed that FliG plays a major role in torque generation in concert with MotAB complexes, leaving the other two proteins, FliM and FliN, in minor and supporting roles (10, 11). However, as mentioned above, all three components are required for flagellar protein export (6, 22, 26). Together with the C ring, FliI pushes export substrates into the gate using the energy of ATP hydrolysis. Just recently, it was shown that FliI ATPase activity is not absolutely necessary for protein export and that increasing proton motive force (PMF) or reversion mutations in FlhA and FlhB can compensate for its absence (17, 21).In order to elucidate the roles that FliG, FliM, and FliN play in export, we employed C-ring-defective mutants. Here, we show that the overproduction of FliI allows flagellar formation in C-ring-defective mutants. We closely examined flagella formed in those mutants by electron microscopy, noting percentages of flagellation in each population, analyzing partially formed structures, and measuring hook length.