Entrapment of biological control agents applied to entomopathogenic nematodes

Summary Hydrogels of alginate, phospho guar gum, carboxymethyl guar gum, k-carrageenan and cellulose sulphate, respectively were tested to find easily redissolvable gels. The entomopathogenic nematode, Heterorhabditis sp., was entrapped in calcium alginate beads, calcium alginate hollow spheres and foils made from different hydrogels. Emigration from calcium alginate beads after 7 days of storage was 100 % at room temperature and was lowered to 6 % at 6 °C, whereas no emigration from calcium alginate hollow spheres was found at either temperature. Highly concentrated polymer foils produced on gauze showed reduced emigration with a survival of 80 % after 24 h compared to foils produced on glass slides. Calcium alginate beads can be used for a controlled release of the nematode into the environment, while hollow spheres and foils are suitable for storage.Dedicated to Prof. Dr. F. Wagner on the occasion of his 65th birthday     

A novel encapsulation technique for the production of artificial seeds

A novel technique for the encapsulation of plant material in calcium alginate hollow beads was tested. The technique involves suspending plant material (i.e. plant cells, tissues, organs, shoot tips, somatic embryos) in a solution containing carboxymethylcellulose and calcium chloride and then dripping it into a stirred sodium alginate solution. In initial experiments with Daucus carota (carrot), it was found that after 14 days of cultivation, 100 % of seeds encapsulated in calcium alginate hollow beads would germinate in the liquid core and that 13% would burst the capsules. Embryogenic calli developed inside hollow beads and formed somatic embryos while calli in conventional calcium alginate beads became detached from the beads early in development, and no somatic embryogenesis occurred. With Solanum tuberosum (potato), development of calli was observed in 50% of hollow beads. Eighty-one percent of shoot tips encapsulated in hollow beads sprouted and grew out of the capsules. Received: 28 October 1999 / Revision received: 11 February 2000 / Accepted: 22 February 2000     

Plant regeneration from alginate-encapsulated shoot tips of Phylianthus amarus schum and thonn, a medicinally important plant species

Summary A method was developed for plant regeneration from alginate-encapsulated shoot tips of Phyllanthus amarus. Shoot tips excised from in vitro proliferated shoots were encapsulated in calcium alginate beads. The best gel complexation was achieved using 3% sodium alginate and 75 mM CaCl₂·2H₂O. Maximum percentage response for conversion of encapsulated shoot tips into plantlets was 90% after 5 wk of culture on Murashige and Skoog (MS) medium without plant growth regulator. The regrowth ability of encapsulated shoot tips was affected by the concentration of sodium alginate, storage duration, and the presence or absence of MS nutrients in calcium alginate beads. Plantlets with well-developed shoot and roots were transferred to pots containing an autoclaved mixture of soilrite and peat moss (1∶1). The conversion of encapsulated shoot tips into plantlets also occurred when calcium alginate beads were directly sown in autoclaved soilrite moistened with 1/4-MS salts. Encapsulation of vegetative propagules in calcium alginate beads can be used as an alternative to synthetic seeds derived from somatic embryos.     

The effect of calcium alginate entrapment on the physiology of Mycobacterium sp. strain E3

The influence of calcium alginate entrapment on the physiology of Mycobacterium sp. E3 is reported. As a model system the NADH-requiring conversion of propene to 1,2-epoxypropane in the presence and absence of glucose as co-substrate was selected. The co-factor-dependent reaction was used as a measure of the physiological status of the resting cells. Initial kinetic experiments established a system free from diffusional limitations. In the presence of glucose there were no differences between the physiology of the free and immobilized cells. The apparent differences observed in the absence of co-substrate were demonstrated to be caused by calcium ions and to a lesser degree alginate; the addition of calcium, alginate or calcium alginate beads containing no cells to the free cells gave similar data to that obtained with immobilized cells. The results presented highlight the high concentrations of calcium to which cells immobilized in calcium alginate beads can be exposed. Correspondence to: M. R. Smith     

Potential application of immobilized streptokinase extracted from Streptococcus equinus VIT_VB2

Streptokinase purified from Streptococcus equinus VIT_VB2 isolated from bovine milk sample was immobilized in various solid supports namely entrapment in agarose gel, calcium alginate beads and gelatin gel by cross-linking with formaldehyde. Immobilization of streptokinase in calcium alginate beads showed maximum efficiency (81.8?±?1.06%) when compared with entrapment with agarose gel (55.6?±?2.17%) and cross-linked gelatin formaldehyde gel (71.0?±?1.54%). The purified SK activity was expressed maximum in calcium alginate (1%) and gelatin gel (0.25%) with 1292.68?±?1.33 and 1121.9?±?1.2?U?mL^?1, respectively. Similarly, SK entrapped in gelatin gel and calcium alginate showed maximum in vitro blood clot lysis activity with 77.67?±?2.64% and 76.16?±?2.72%, respectively. The immobilized SK in gelatin gel showed complete clot lysis within 15?min; hence, this application of the study could be used in the treatment of superficial thrombophlebitis, phlebitis, and venous thrombosis. These beads were used for three repeated cycles to check the conversion of substrates into their products, and we concluded that SK can be immobilized in the suitable matrices. Therefore, this helps in the drug-delivery strategies in highly efficient way, moreover, economically competent process in the pharmaceutics.     

Stabilization of Aspergillus parasiticus cytosine deaminase by immobilization on calcium alginate beads improved enzyme operational stability

Cytosine deaminase (CD) from Aspergillus parasiticus, which has half-life of 1.10?h at 37°C, was stabilized by immobilization on calcium alginate beads. The immobilized CD had pH and temperature optimum of 5 and 50°C respectively. The immobilized enzyme also stoichiometrically deaminated Cytosine and 5-fluorocytosine (5-FC) with the apparent K_M values of 0.60?mM and 0.65?mM respectively, displaying activation energy of 10.72 KJ/mol. The immobilization of native CD on calcium alginate beads gave the highest yield of apparent enzymatic activity of 51.60% of the original activity and the enzymatic activity was lost exponentially at 37°C over 12?h with a half-life of 5.80?h. Hence, the operational stability of native CD can be improved by immobilization on calcium alginate beads.     

Performance of immobilized cells for dihexyl sulfosuccinate biotransformation

Possibilities of using immobilized bacterial cells for waste water treatment in a continuous process was determined. Cells ofComamonas terrigena strain N3H immobilized in calcium alginate beads were successful by used in packed bead-type reactor for continuous biotransformation of the anion-active surfactant dihexyl sulfosuccinate. Absence of calcium ions from the treated medium led to the disruption of alginate beads within 8 d of usage. When the medium was supplemented with Ca²⁺ ions the beads were stable for at least one month in the continuous process. During the whole time period the transformation effectivity was in the range of 80–100% even at the highest, flow rate of 14 mL/min. Presented at the 4th Mini-Symposium on Biosorption and Microbial Degradation, Prague, Czech Republic, November 26–29, 1996.     

An airlift loop reactor for the transformation of steroids by immobilized cells

Summary The flow behaviour of calcium alginate beads in an airlift reactor (ALR) with external loop was dependent on the airflow rate into and the amount of beads in the reactor. The performance of immobilizedArthrobacter simplex for the ¹-dehydrogenation of hydrocortisone in the ALR compared favourably to that in a stirred tank reactor. The physical stability of the calcium alginate beads was significantly greater in the ALR.     

Preparation and Characterization of Silver Nanoparticles-Loaded Calcium Alginate Beads Embedded in Gelatin Scaffolds

Silver nanoparticles (AgNPs)-loaded alginate beads embedded in gelatin scaffolds were successfully prepared. The AgNPs-loaded calcium alginate beads were prepared by electrospraying method. The effect of alginate concentration and applied voltage on shape and diameter of beads was studied. The diameter of dry AgNPs-loaded calcium alignate beads at various concentrations of AgNO₃ ranged between 154 and 171 μm. The AgNPs-loaded calcium alginate beads embedded in gelatin scaffolds were fabricated by freeze-drying method. The water swelling and weight loss behaviors of the AgNPs-loaded alginate beads embedded in gelatin scaffolds increased with an increase in the submersion time. Moreover, the genipin-cross-linked gelatin scaffolds were proven to be nontoxic to normal human dermal fibroblasts, suggesting their potential uses as wound dressings.     

Artemisia arborescens L essential oil loaded beads: Preparation and characterization

The purpose of this work was to prepare sodium alginate beads as a device for the controlled release of essential oil for oral administration as an antiviral agent. Different formulations were prepared with sodium alginate as a natural polymer and calcium chloride or glutaraldehyde as a cross-linking agent. Loading capacities of between 86% and 100% were obtained in freshly prepared beads by changing exposure time to the cross-linking agent. Drying of the calcium alginate beads caused only a slight decrease in the loading efficiency. The surface morphology of the different bead formulations were studied using scanning electron microscopy (SEM). Stability studies over a 3-month period showed that glutaraldehyde reacted with some components ofArtemisia arborescens L essential oil, changing its composition. Calcium alginate beads showed an in vitro controlled release of the essential oil for the investigated 24 hours, while the use of glutaraldehyde as a cross-linking agent was found not appropriate because of the interactions with azulene derivatives and the low degree of matrix cross-linkage. Published: August 24, 2007     

Beaded matrices from cross-linked alginate for affinity and ion exchange chromatography of proteins

Summary To obtain a low cost, beaded chromatographic matrix, calcium alginate beads were cross-linked with epichlorohydrin, and calcium was removed by sodium citrate treatment. The cross-linking reaction for obtaining stable beads was optimized. For purification of haemoglobin by ion exchange, cross-linked calcium-free alginate beads have a q_max of 60 mg/ml and a K_d of 0.02 mg/ml gel, while for affinity polygalacturonase purification K_aff was 0.007 ml/g.     

Continuous penicillin production by Penicillium chrysogenum immobilized in calcium alginate beads

Summary A high penicillin-producing Penicillium chrysogenum strain immobilized in calcium alginate beads was used for continuous penicillin fermentation in a bubble column and in a conical bubble fermentor. The fermentation was limited by the growth rate, dilution rates and the stability of the alginate beads. The immobilized cells lost their ability to produce penicillin in the bubble column after 48 h from beginning of the continuous fermentation. In the conical bubble fermentor the immobilized cells remained active for more than 7 days. This bioreactor ensured a good distribution of nutrients and oxygen as well as a higher mechanical stability of the alginate beads.     

Utilization in alginate beads for Cu(II) and Ni(II) adsorption of an exopolysaccharide produced by <Emphasis Type="Italic">Chryseomonas luteola</Emphasis> TEM05

Copper and nickel adsorption onto calcium alginate, sodium alginate with an extracellular polysaccharide (EPS) produced by the activated sludge bacterium Chryseomonas luteola TEM05 and the immobilized C. luteola TEM05 from aqueous solutions were studied. After that, the multi metal ions containing these ions together were prepared and partial competitive adsorptions of these mixtures were also investigated. The metal adsorption of gel beads were carried out at pH 6.0, 25 °C. The maximum adsorption capacities in Langmuir isotherm for calcium alginate, calcium alginate + EPS, calcium alginate + C. luteola TEM05 and calcium alginate + EPS + C. luteola TEM05 were 1.505, 1.989, 1.976, 1.937 mmol/g dry weight for Cu(II) and 0.996, 1.224, 1.078, 1.219 mol/g dry weight for Ni(II), respectively.The competitive biosorption capacities of the carrier for all metal ions were lower than single conditions.     

Evaluation of Chitosan/Alginate Beads Using Experimental Design: Formulation and <Emphasis Type="Italic">In Vitro</Emphasis> Characterization

Bovine serum albumin-loaded beads were prepared by ionotropic gelation of alginate with calcium chloride and chitosan. The effect of sodium alginate concentration and chitosan concentration on the particle size and loading efficacy was studied. The diameter of the beads formed is dependent on the size of the needle used. The optimum condition for preparation alginate–chitosan beads was alginate concentration of 3% and chitosan concentration of 0.25% at pH 5. The resulting bead formulation had a loading efficacy of 98.5% and average size of 1,501 μm, and scanning electron microscopy images showed spherical and smooth particles. Chitosan concentration significantly influenced particle size and encapsulation efficiency of chitosan–alginate beads (p < 0.05). Decreasing the alginate concentration resulted in an increased release of albumin in acidic media. The rapid dissolution of chitosan–alginate matrices in the higher pH resulted in burst release of protein drug.     

Immobilization of Saccharomyces uvarum cells in porous beads of polyacrylamide gel for ethanolic fermentation

Summary A procedure which does not involve the use of an immiscible organic solvent phase is described for the entrapment of yeast cells in porous beads of polyacrylamide gel. The cells are rapidly dispersed at 4° C in an aqueous solution containing sodium alginate and acrylamide-N,Nmethylene-bis-acrylamide monomer, and the suspension is immediately dropped into a solution of calcium formate to give calcium alginate coated beads. Polyacrylamide gel forms within the bead. The calcium alginate is subsequently leached out of the composite bead with either sodium citrate or potassium phosphate buffer solution. Cells of Saccharomyces uvarum ATCC 26 602 entrapped in such polyacrylamide beads ferment cane molasses in batch mode at higher specific ethanol productivity than a free cell suspension. Their volumetric productivity in continuous fermentation is higher than that of Ca²⁺-alginate immobilized cells.NCL Communication No. 4383     

Low-temperature electron microscopy for the study of polysaccharide ultrastructures in hydrogels. II. Effect of temperature on the structure of Ca2+-alginate beads

Calcium alginate beads were thermally treated at temperatures ranging from 25 degrees C to 130 degrees C for periods of up to 30 minutes. Important modifications to the structure of the alginate beads were shown to be a function of the temperature and period of incubation at each temperature. Modifications to the alginate beads included reduction in size, mechanical resistance, and molecular weight cut-off with increasing temperature and incubation period. Thus, heating 700 microm calcium alginate beads for 20 min at 130 degrees C resulted in a 23% reduction in diameter, 70% increase in mechanical resistance, and 67% reduction in molecular weight cut-off.Incubation of calcium alginate beads containing 2 x 10(6) kDa blue dextran for 20 min at 130 degrees C resulted in no detectable loss of either dye or alginate. This indicates the shrinkage of the beads was due to re-arrangement of the alginate chains within the beads, coupled with loss of water. This hypothesis was verified by direct visual observation of calcium alginate beads before and after thermal treatment using cryo-scanning electron microscopy (cryo-SEM). Unlike other microscopy methods cryo-SEM offers the advantage of extremely rapid freezing which preserves the original structure of the alginate network. As a result cryo-SEM is a powerful tool for studies of hydrogel and capsule structure and formation.Differential scanning calorimetry (DSC) showed that the water entrapped in 2% alginate beads was present in a single state, irrespective of the thermal treatment. This result is attributed to the low alginate concentration used to form the beads.     

Solid matrix characterization of immobilized Pseudomonas putida MTCC 1194 used for phenol degradation

Characterization studies of calcium alginate beads with encapsulated Pseudomonas putida MTCC 1194, used for the biodegradation of phenol, were carried out to investigate the reactivity, reusability and structural strength of the solid matrix. Various techniques were employed to improve the structural stability of the immobilized solid necessary for its use in commercial reactors like packed bed flow reactor, fluidized bed and CSTR systems. Experiments were performed to establish the optimum conditions for durability, strength and steady biochemical reactivity. During a batch run of 40 h a gradual decline in the rate of phenol degradation was observed with the immobilized system. The calcium alginate beads with high structural strength yielded decreased activity. Treatment with a hardening agent like glutaraldehyde for different concentrations and treatment times led to variations in structural stability, reusability and the extent of phenol degradation. Scanning electron microscope studies of the immobilized solid indicated the internal distribution pattern of the cells encapsulated in a calcium alginate bead. Received: 13 November 1998 / Received revision: 27 January 1999 / Accepted: 31 January 1999     

Production of oxytetracycline by immobilized Streptomyces rimosus cells in calcium alginate gels

Streptomyces rimosus Pfizer 18234–2 cells were immobilized in calcium alginate and used for the production of oxytetracycline. The influence of the incubation period, alginate concentration and storage in CaCl₂ were investigated. From the results of the repeated batch fermentations of the shake flasks, a good level of antibiotic was maintained for a period of about 28 days using 4% calcium alginate. The cell leakage and cell concentration inside the beads were affected by the alginate concentration and storage in CaCl₂ solution.     

Removable colored coatings based on calcium alginate hydrogels

This article describes the creation of a nontoxic, biodegradable coating using calcium alginate and FD&C approved dyes. The coating is robust but is rapidly removed upon treatment with disodium ethylenediamine tetraacetate (EDTA). Dye leaching from calcium alginate films was studied, and it was determined that the efficiency of dye retention is proportional to the degree of cross-linking. Degradation rates were studied on calcium alginate beads serving as a model for a coating. We determined that degradation rates depend on the gel's cross-linking and on the amount of EDTA used. Bead size also influenced the degradation rates; smaller beads degraded faster than larger beads. We show that the coating can be used as an easily removable and environmentally friendly logotype on an artificial turf surface. Applications of these coatings can be extended to food, cosmetic, medicinal, and textile uses and to wherever nontoxic, easily removable colored coating is desired.     

Effect of trisodium citrate treatment on hybridoma cell viability

Trisodium citrate has been widely used to dissolve calcium alginate beads in order to estimate cell concentration in the beads. To obtain an accurate measurement of viable cell concentration in calcium alginate beads, the effect of trisodium citrate solutions on hybridoma cell viability was studied with regard to stage of growth and trisodium citrate concentration. The cells in the decline phase of growth were more sensitive to 30 minutes of trisodium citrate treatment than the cells in the exponential phase of growth. The cell viability did not decrease rapidly during citrate treatment regardless of cell growth phase and trisodium citrate concentration in the range of 1–1.5%. By using the commercially available sodium alginate, Keltone LV, dissolution time can be kept short enough (below 5 minutes) to keep the effect of trisodium citrate negligible to cell viability.