An 18K protein from ascites hepatoma cell depolymerizes actin filaments rapidly

Several actin binding proteins were isolated from ascites hepatoma cells AH7974 by DNase I affinity chromatography. Among them, a protein having a molecular weight of 18,000 was further purified by DEAE cellulose and hydroxyapatite column chromatographies and gel filtration on a Sephadex G-75 column. The 18K protein not only inhibits actin polymerization but also depolymerizes actin filaments. This conclusion was supported by viscosity and fluorescence intensity measurements and the DNase I inhibition assay. A chemical cross-linking experiment suggested that the 18K protein binds to monomeric actin and forms and 18K-actin 1:1 complex. The net depolymerization rate by the 18K protein measured by the DNase I inhibition assay was slower than the rapid reduction of the fluorescence intensity of pyrene-labeled F-actin upon addition of the 18K protein. This result suggests that the 18K protein not only binds to monomeric actin but also binds to actin filaments directly. The sedimentation assay showed that a part of the 18K protein was cosedimented with actin filaments. Electron microscopic observations demonstrated that the 18K protein decreased the amount of actin filaments and the remaining filaments appeared to be decorated and distorted by the 18K protein. The 18K protein had no Ca2+ ion sensitivity and exhibited the same effect on both this tumor actin and muscle actin.     

Bundling of actin filaments by elongation factor 1 alpha inhibits polymerization at filament ends

Elongation factor 1 alpha (EF1 alpha) is an abundant protein that binds aminoacyl-tRNA and ribosomes in a GTP-dependent manner. EF1 alpha also interacts with the cytoskeleton by binding and bundling actin filaments and microtubules. In this report, the effect of purified EF1 alpha on actin polymerization and depolymerization is examined. At molar ratios present in the cytosol, EF1 alpha significantly blocks both polymerization and depolymerization of actin filaments and increases the final extent of actin polymer, while at high molar ratios to actin, EF1 alpha nucleates actin polymerization. Although EF1 alpha binds actin monomer, this monomer-binding activity does not explain the effects of EF1 alpha on actin polymerization at physiological molar ratios. The mechanism for the inhibition of polymerization is related to the actin-bundling activity of EF1 alpha. Both ends of the actin filament are inhibited for polymerization and both bundling and the inhibition of actin polymerization are affected by pH within the same physiological range; at high pH both bundling and the inhibition of actin polymerization are reduced. Additionally, it is seen that the binding of aminoacyl-tRNA to EF1 alpha releases EF1 alpha's inhibiting effect on actin polymerization. These data demonstrate that EF1 alpha can alter the assembly of F-actin, a filamentous scaffold on which non- membrane-associated protein translation may be occurring in vivo.     

Tropomodulin caps the pointed ends of actin filaments

Many proteins have been shown to cap the fast growing (barbed) ends of actin filaments, but none have been shown to block elongation and depolymerization at the slow growing (pointed) filament ends. Tropomodulin is a tropomyosin-binding protein originally isolated from red blood cells that has been localized by immunofluorescence staining to a site at or near the pointed ends of skeletal muscle thin filaments (Fowler, V. M., M. A., Sussman, P. G. Miller, B. E. Flucher, and M. P. Daniels. 1993. J. Cell Biol. 120: 411-420). Our experiments demonstrate that tropomodulin in conjunction with tropomyosin is a pointed end capping protein: it completely blocks both elongation and depolymerization at the pointed ends of tropomyosin-containing actin filaments in concentrations stoichiometric to the concentration of filament ends (Kd < or = 1 nM). In the absence of tropomyosin, tropomodulin acts as a "leaky" cap, partially inhibiting elongation and depolymerization at the pointed filament ends (Kd for inhibition of elongation = 0.1-0.4 microM). Thus, tropomodulin can bind directly to actin at the pointed filament end. Tropomodulin also doubles the critical concentration at the pointed ends of pure actin filaments without affecting either the rate of extent of polymerization at the barbed filament ends, indicating that tropomodulin does not sequester actin monomers. Our experiments provide direct biochemical evidence that tropomodulin binds to both the terminal tropomyosin and actin molecules at the pointed filament end, and is the long sought-after pointed end capping protein. We propose that tropomodulin plays a role in maintaining the narrow length distributions of the stable, tropomyosin-containing actin filaments in striated muscle and in red blood cells.     

An actin-modulating protein from Physarum polycephalum. I. Isolation and purification

High-speed centrifugation supernatants from slime mould plasmodia show considerable activities to inhibit the polymerization of actin as revealed by viscosity measurements. By following increasing inhibitory activities an actin modulating protein (AM-protein) has been isolated and purified which affects the polymer state of actin. AM-protein has a peptide chain weight of 42 000 and is thus indistinguishable from actin by SDS-electrophoresis, but can be clearly distinguished by isoelectric focussing. Peptide maps from partial proteolytic digests of AM-protein and Physarum actin reveal no similarities thereby excluding that AM-protein is a denatured or modified form of actin. The protein is isolated from crude extracts as a heterodimer with actin to which it strongly binds. This heterodimer affects the polymerization of large amounts of actin by inducing oligomeric or low-polymer actin complexes and thus inhibiting the formation of long actin filaments. The AM-protein/actin heterodimer has only a slight effect of F-actin. It partially depolymerized F-actin within several hours. By ion exchange chromatography in 8 M urea the AM-protein is separated from the actin. The purified AM-protein monomer is renatured and inhibits the polymerization of actin like the heterodimer but additionally, depolymerizes actin filaments very rapidly and effectively by breaking them into oligomer or low-polymer complexes. The addition of less than 1% AM-protein causes a decrease of the specific viscosity of an F-actin solution by 50%. The degree of polymerization inhibition and depolymerization of actin is strictly dependent on the amount of AM-protein added; therefore a catalytic type of reaction between both proteins can be excluded.     

The natural product cucurbitacin e inhibits depolymerization of actin filaments

Although small molecule actin modulators have been widely used as research tools, only one cell-permeable small molecule inhibitor of actin depolymerization (jasplakinolide) is commercially available. We report that the natural product cucurbitacin E inhibits actin depolymerization and show that its mechanism of action is different from jasplakinolide. In assays using pure fluorescently labeled actin, cucurbitacin E specifically affects depolymerization without affecting polymerization. It inhibits actin depolymerization at substoichiometric concentrations up to 1:6 cucurbitacin E:actin. Cucurbitacin E specifically binds to filamentous actin (F-actin) forming a covalent bond at residue Cys257, but not to monomeric actin (G-actin). On the basis of its compatibility with phalloidin staining, we show that cucurbitacin E occupies a different binding site on actin filaments. Using loss of fluorescence after localized photoactivation, we found that cucurbitacin E inhibits actin depolymerization in live cells. Cucurbitacin E is a widely available plant-derived natural product, making it a useful tool to study actin dynamics in cells and actin-based processes such as cytokinesis.     

A novel actin filament-capping protein from sea urchin eggs: a 20,000-molecular-weight protein-actin complex

A novel protein factor which reduced the low-shear viscosity of rabbit skeletal muscle actin was purified from a 0.6 M KCl-extract of an insoluble fraction of sea urchin eggs by ammonium sulfate fractionation, gel filtration column chromatography, DNase I column chromatography, and hydroxylapatite column chromatography. This protein factor was shown to be a one-to-one complex of a 20,000-molecular-weight protein and egg actin. This protein complex accelerated the initial rate of actin polymerization, but reduced the steady-state viscosity of F-actin. It inhibited at substoichiometric amounts the elongation of actin filaments on sonicated F-actin fragments and depolymerization of F-actin induced by dilution. In addition, it increased the critical concentration of actin for polymerization. All these effects of this protein complex on actin could be explained by the "capping the barbed end" of the actin filament by the complex. The 20,000-molecular-weight protein which was separated from actin also possessed the barbed end-capping activities, but differed from the complex in that it did not accelerate the polymerization of actin.     

Utrophin binds laterally along actin filaments and can couple costameric actin with sarcolemma when overexpressed in dystrophin-deficient muscle

Dystrophin is widely thought to mechanically link the cortical cytoskeleton with the muscle sarcolemma. Although the dystrophin homolog utrophin can functionally compensate for dystrophin in mice, recent studies question whether utrophin can bind laterally along actin filaments and anchor filaments to the sarcolemma. Herein, we have expressed full-length recombinant utrophin and show that the purified protein is fully soluble with a native molecular weight and molecular dimensions indicative of monomers. We demonstrate that like dystrophin, utrophin can form an extensive lateral association with actin filaments and protect actin filaments from depolymerization in vitro. However, utrophin binds laterally along actin filaments through contribution of acidic spectrin-like repeats rather than the cluster of basic repeats used by dystrophin. We also show that the defective linkage between costameric actin filaments and the sarcolemma in dystrophin-deficient mdx muscle is rescued by overexpression of utrophin. Our results demonstrate that utrophin and dystrophin are functionally interchangeable actin binding proteins, but that the molecular epitopes important for filament binding differ between the two proteins. More generally, our results raise the possibility that spectrin-like repeats may enable some members of the plakin family of cytolinkers to laterally bind and stabilize actin filaments.     

On the interaction of bovine seminal RNase with actin in vitro

Ribonuclease from bovine seminal plasma (RNase BS) interacts with skeletal muscle actin in the following way: it binds to actin with an apparent binding constant of 9.2 X 10(4) M-1 in 0.1 M KCl, induces the polymerization of actin below the critical concentration in depolymerization buffer, accelerates the salt-induced polymerization of actin even at a molar ratio of RNase to actin lower than 1/100, and bundles F-actin filaments. In the bundles the molar ratio of RNase to actin is about 0.66. Actin inhibits the enzymatic activity of RNase BS. RNase A from bovine pancreas, which is structurally almost identical to the subunits of RNase BS as well as a monomeric form of RNase BS, do not cross-link actin filaments and have a much smaller effect on the polymerization of actin. We conclude that the dimeric structure of the RNase BS, which consists of two identical subunits cross-linked by interchain disulfide bridges, is probably responsible for the bundling activity and the accelerating effect on the polymerization of actin.     

A 45,000-mol-wt protein from unfertilized sea urchin eggs severs actin filaments in a calcium-dependent manner and increases the steady-state concentration of nonfilamentous actin

A 45,000-mol-wt protein has been purified from unfertilized sea urchin (Strongylocentrotus purpuratus) eggs. The isolation scheme includes DEAE cellulose ion-exchange chromatography, gel filtration, and hydroxylapatite chromatography. The homogeneity of the isolated protein is greater than 90% by SDS PAGE. The 45,000-mol-wt protein reduces the viscosity of actin filaments in a Ca2+-dependent manner. The free calcium concentration required for the activity of this protein is in the micromolar range. Electron microscopic studies reveal that the formation of short filaments parallels the decrease in viscosity. Energy transfer and sedimentation experiments indicate a net disassembly of actin filaments and an increase in the steady-state nonfilamentous actin concentration in the presence of Ca2+ ions and the 45,000-mol-wt protein. The increase in the steady-state nonfilamentous actin concentration is proportional to the amount of 45,000-mol-wt protein added. The actin molecules disassembled by the addition of the 45,000-mol-wt protein are capable of polymerization.     

Control of actin assembly and disassembly at filament ends

The most important discovery in the field is that the Arp2/3 complex nucleates assembly of actin filaments with free barbed ends. Arp2/3 also binds the sides of actin filaments to create a branched network. Arp2/3's nucleation activity is stimulated by WASP family proteins, some of which mediate signaling from small G-proteins. Listeria movement caused by actin polymerization can be reconstituted in vitro using purified proteins: Arp2/3 complex, capping protein, actin depolymerizing factor/cofilin, and actin. actin depolymerizing factor/cofilin increases the rate at which actin subunits leave pointed ends, and capping protein caps barbed ends.     

Identification of a factor in conventional muscle actin preparations which inhibits actin filament self-association

Gel filtration of depolymerized conventionally purified muscle actin separates from the actin monomers a fraction of minor contaminants with a Stokes' radius of 4.7 nm which has the ability to block actin filament network formation. On the basis of heat and trypsin sensitivity, this inhibitory activity appears to be a protein. The inhibitory activity binds to actin filaments and reduces their low shear viscosity by up to 99% in a concentration dependent fashion while reducing polymerization to only a minor extent.     

An actin-depolymerizing protein in embryonic chicken skeletal muscle: purification and characterization

In embryonic skeletal muscle, a large amount of non-polymerized actin exists in the cytoplasm (Shimizu and Obinata [1986] J. Biochem. 99, 751-759). A 19-kDa protein (called 19K protein) which binds to G-actin was purified by sequential chromatography on DNase I-agarose, hydroxylapatite, SP-Sephadex, and Sephadex G-75, from the sarcoplasmic fraction of embryonic chicken skeletal muscle. This protein decreased the extent of actin polymerization at a steady state and increased the monomeric actin in a concentration-dependent fashion; it also caused quick depolymerization of F-actin, as determined by spectrophotometry at 237 nm, viscometry, DNase I inhibition assay, and electron microscopy. The molar ratio of 19K protein and actin interacting with each other was estimated to be 1:1. From these results, 19K protein was regarded as being actin depolymerizing protein. The amount of 19K protein in muscle decreased during development. The inhibitory action of 19K protein was removed by myosin or heavy meromyosin, and actin filaments were formed on the surface of myosin filaments when myosin filaments were added to a mixture of actin and 19K protein in a physiological salt solution. We propose that actin assembly is dually controlled in the developing muscle by the inhibitor(s) and an accelerator (myosin); this mechanism may enable the ordered assembly of actin and myosin in the early phase of myofibrillogenesis.     

Arabidopsis capping protein (AtCP) is a heterodimer that regulates assembly at the barbed ends of actin filaments

The precise regulation of actin filament polymerization and depolymerization is essential for many cellular processes and is choreographed by a multitude of actin-binding proteins (ABPs). In higher plants the number of well characterized ABPs is quite limited, and some evidence points to significant differences in the biochemical properties of apparently conserved proteins. Here we provide the first evidence for the existence and biochemical properties of a heterodimeric capping protein from Arabidopsis thaliana (AtCP). The purified recombinant protein binds to actin filament barbed ends with Kd values of 12-24 nM, as assayed both kinetically and at steady state. AtCP prevents the addition of profilin actin to barbed ends during a seeded elongation reaction and suppresses dilution-mediated depolymerization. It does not, however, sever actin filaments and does not have a preference for the source of actin. During assembly from Mg-ATP-actin monomers, AtCP eliminates the initial lag period for actin polymerization and increases the maximum rate of polymerization. Indeed, the efficiency of actin nucleation of 0.042 pointed ends created per AtCP polypeptide compares favorably with mouse CapZ, which has a maximal nucleation of 0.17 pointed ends per CapZ polypeptide. AtCP activity is not affected by calcium but is sensitive to phosphatidylinositol 4,5-bisphosphate. We propose that AtCP is a major regulator of actin dynamics in plant cells that, together with abundant profilin, is responsible for maintaining a large pool of actin subunits and a surprisingly small population of F-actin.     

ADP-ribosylated actin caps the barbed ends of actin filaments

The mode of action on actin polymerization of skeletal muscle actin ADP-ribosylated on arginine 177 by perfringens iota toxin was investigated. ADP-ribosylated actin decreased the rate of nucleated actin polymerization at substoichiometric ratios of ADP-ribosylated actin to monomeric actin. ADP-ribosylated actin did not tend to copolymerize with actin. Actin filaments were depolymerized by the addition of ADP-ribosylated actin. The maximal monomer concentration reached by addition of ADP-ribosylated actin was similar to the critical concentration of the pointed ends of actin filaments. ADP-ribosylated actin had no effect on the rate of polymerization of gelsolin-capped actin filaments which polymerize at the pointed ends. The results suggest that ADP-ribosylated actin acts as a capping protein which binds to the barbed ends of actin filaments to inhibit polymerization. Based on an analysis of the depolymerizing effect of ADP-ribosylated actin, the equilibrium constant for binding of ADP-ribosylated actin to the barbed ends of actin filaments was determined to be about 10(8) M-1. As actin is ADP-ribosylated by perfringens iota toxin and by botulinum C2 toxin, it appears that conversion of actin into a capping protein by ADP-ribosylation is a pathophysiological reaction catalyzed by bacterial toxins which ultimately leads to inhibition of actin assembly.     

Isolation of an actin polymerization stimulator from bovine thyroid plasma membranes

An actin polymerization stimulator was purified from bovine thyroid plasma membranes by DNase I affinity column chromatography. Although the molecular weight of the protein was about 42,000 (42K) by sodium dodecyl sulfate polyacrylamide gel electrophoresis, it did not comigrate with actin. In the presence of 30 mM KCl, the 42K protein facilitated formation of actin filaments when analyzed by a centrifugation method, accelerated the initial phase of actin polymerization as measured in an Ostwald viscometer and increased the length of filaments as shown by electron microscopy. The 42K protein also accelerated the initial phase of actin polymerization in the presence of 100 mM KCl and 2 mM MgCl₂ but did not affect the final viscosity. The effect of the 42K protein was diminished by 5 uM cytochalasin B or 1 uM cytochalasin D. This 42K protein may anchor actin filaments onto the thyroid plasma membrane.     

Kinetic evidence for insertion of actin monomers between the barbed ends of actin filaments and barbed end-bound insertin, a protein purified from smooth muscle

An actin polymerization-retarding protein was isolated from chicken gizzard smooth muscle. This protein copurified with vinculin on DEAE-cellulose and gel filtration columns. The polymerization-retarding protein could be separated from vinculin by hydroxylapatite chromatography. The isolated polymerization-retarding protein lost its activity within a few days, but was stable for weeks when it was not separated from vinculin. We termed the polymerization-retarding protein "insertin". Because of the instability of the isolated insertin, we investigated the effect of insertin-vinculin on actin polymerization. Insertin-vinculin retarded nucleated actin polymerization maximally fivefold. Polymerization at the pointed ends of gelsolin-capped actin filaments was not affected by insertin-vinculin, suggesting that insertin-vinculin binds to the barbed ends, but not to the pointed ends, of actin filaments. Retarded polymerization was observed even if the actin monomer concentration was between the critical concentrations of the ends of treadmilling actin filaments. As at this low monomer concentration the pointed ends depolymerize, monomers appeared to be inserted at the barbed ends between the terminal subunit and barbed end-bound insertin molecules. Insertin-vinculin was found not to increase the actin monomer concentration to the value of the pointed ends. These observations support the conclusion that insertin is not a barbed end-capping protein but an actin monomer-inserting protein. According to a quantitative analysis of the kinetic data, all observations could be explained by a model in which two insertin molecules were assumed to bind co-operatively to the barbed ends of actin filaments. Actin monomers were found to be inserted between the barbed ends and barbed end-bound insertin molecules at a rate of about 1 x 10(6) M-1 s-1. Insertin may be an essential part of the machinery of molecules that permit treadmilling of actin filaments in living cells by insertion of actin molecules between membranes and actin filaments.     

Effects of CapZ, an actin capping protein of muscle, on the polymerization of actin

We have studied the interaction of CapZ, a barbed-end actin capping protein from the Z line of skeletal muscle, with actin. CapZ blocks actin polymerization and depolymerization (i.e., it "caps") at the barbed end with a Kd of approximately 0.5-1 nM or less, measured by three different assays. CapZ inhibits the polymerization of ATP-actin onto filament ends with ATP subunits slightly less than onto ends with ADP subunits, and onto ends with ADP-BeF3- subunits about as much as ends with ADP subunits. No effect of CapZ is seen at the pointed end by measurements either of polymerization from acrosomal processes or of the critical concentration for polymerization at steady state. CapZ has no measureable ability to sever actin filaments in a filament dilution assay. CapZ nucleates actin polymerization at a rate proportional to the first power of the CapZ concentration and the 2.5 power of the actin concentration. No significant binding is observed between CapZ and rhodamine-labeled actin monomers by fluorescence photobleaching recovery. These new experiments are consistent with but do not distinguish between three models for nucleation proposed previously (Cooper & Pollard, 1985). As a prelude to the functional studies, the purification protocol for CapZ was refined to yield 2 mg/kg of chicken breast muscle in 1 week. The activity is stable in solution and can be lyophilized. The native molecular weight is 59,600 +/- 2000 by equilibrium ultracentrifugation, and the extinction coefficient is 1.25 mL mg-1 cm-1 by interference optics. Polymorphism of the alpha and beta subunits has been detected by isoelectric focusing and reverse-phase chromatography. CapZ contains no phosphate (less than 0.1 mol/mol).     

Expression of human plasma gelsolin in Escherichia coli and dissection of actin binding sites by segmental deletion mutagenesis

Human plasma gelsolin has been expressed in high yield and soluble form in Escherichia coli. The protein has nucleating and severing activities identical to those of plasma gelsolin and is fully calcium sensitive in its interactions with monomeric actin. A number of deletion mutants have been expressed to explore the function of the three actin binding sites. Their design is based on the sixfold segmental repeat in the protein sequence. (These sites are located in segment 1, segments 2-3, and segments 4-6). Two mutants, S1-3 and S4-6, are equivalent to the NH2- and COOH-terminal halves of the molecule obtained by limited proteolysis. S1-3 binds two actin monomers in the presence or absence of calcium, it severs and caps filaments but does not nucleate polymerization. S4-6 binds a single actin monomer but only in calcium. These observations confirm and extend current knowledge on the properties of the two halves of gelsolin. Two novel constructs have also been studied that provide a different pairwise juxtaposition of the three sites. S2-6, which lacks the high affinity site of segment 1 (equivalent to the 14,000-Mr proteolytic fragment) and S1,4-6, which lacks segments 2-3 (the actin filament binding domain previously identified using the 28,000-Mr proteolytic fragment). S2-6 binds two actin monomers in calcium and nucleates polymerization; it associates laterally with filaments in the presence or absence of calcium and has a weak calcium-dependent fragmenting activity. S1,4-6 also binds two actin monomers in calcium and one in EGTA, has weak severing activity but does not nucleate polymerization. A model is presented for the involvement of the three binding sites in the various activities of gelsolin.     

The fission yeast cytokinesis formin Cdc12p is a barbed end actin filament capping protein gated by profilin

Cytokinesis in most eukaryotes requires the assembly and contraction of a ring of actin filaments and myosin II. The fission yeast Schizosaccharomyces pombe requires the formin Cdc12p and profilin (Cdc3p) early in the assembly of the contractile ring. The proline-rich formin homology (FH) 1 domain binds profilin, and the FH2 domain binds actin. Expression of a construct consisting of the Cdc12 FH1 and FH2 domains complements a conditional mutant of Cdc12 at the restrictive temperature, but arrests cells at the permissive temperature. Cells overexpressing Cdc12(FH1FH2)p stop growing with excessive actin cables but no contractile rings. Like capping protein, purified Cdc12(FH1FH2)p caps the barbed end of actin filaments, preventing subunit addition and dissociation, inhibits end to end annealing of filaments, and nucleates filaments that grow exclusively from their pointed ends. The maximum yield is one filament pointed end per six formin polypeptides. Profilins that bind both actin and poly-l-proline inhibit nucleation by Cdc12(FH1FH2)p, but polymerization of monomeric actin is faster, because the filaments grow from their barbed ends at the same rate as uncapped filaments. On the other hand, Cdc12(FH1FH2)p blocks annealing even in the presence of profilin. Thus, formins are profilin-gated barbed end capping proteins with the ability to initiate actin filaments from actin monomers bound to profilin. These properties explain why contractile ring assembly requires both formin and profilin and why viability depends on the ability of profilin to bind both actin and poly-l-proline.     

EPLIN regulates actin dynamics by cross-linking and stabilizing filaments

Epithelial protein lost in neoplasm (EPLIN) is a cytoskeleton-associated protein encoded by a gene that is down-regulated in transformed cells. EPLIN increases the number and size of actin stress fibers and inhibits membrane ruffling induced by Rac. EPLIN has at least two actin binding sites. Purified recombinant EPLIN inhibits actin filament depolymerization and cross-links filaments in bundles. EPLIN does not affect the kinetics of spontaneous actin polymerization or elongation at the barbed end, but inhibits branching nucleation of actin filaments by Arp2/3 complex. Side binding activity may stabilize filaments and account for the inhibition of nucleation mediated by Arp2/3 complex. We propose that EPLIN promotes the formation of stable actin filament structures such as stress fibers at the expense of more dynamic actin filament structures such as membrane ruffles. Reduced expression of EPLIN may contribute to the motility of invasive tumor cells.