Sequential DEXAS: a method for obtaining DNA sequences from genomic DNA and blood in one reaction

Sequential DEXAS (direct exponential amplification and sequencing), a one step amplification and sequencing procedure that allows accurate, inexpensive and rapid DNA sequence determination directly from genomic DNA, is described. This method relies on the simultaneous use of two DNA polymerases that differ both in their ability to incorporate dideoxynucleotides and in the time at which they are activated during the reaction. One enzyme, which incorporates deoxynucleotides and performs amplification of the target DNA sequence, is supplied in an active state whereas the other enzyme, which incorporates dideoxynucleotides and performs the sequencing reaction, is supplied in an inactive state but becomes activated by a temperature step during the thermocycling. Thus, in the initial stage of the reaction, target amplification occurs, while in the second stage the sequencing reaction takes place. We show that Sequential DEXAS yields high quality sequencing results directly from genomic DNA as well as directly from human blood without any prior isolation or purification of DNA.     

DNA sequencing using biotinylated dideoxynucleotides and mass spectrometry

Matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MS) has been explored widely for DNA sequencing. The major requirement for this method is that the DNA sequencing fragments must be free from alkaline and alkaline earth salts as well as other contaminants for accurately measuring the masses of the DNA fragments. We report here the development of a novel MS DNA sequencing method that generates Sanger-sequencing fragments in one tube using biotinylated dideoxynucleotides. The DNA sequencing fragments that carry a biotin at the 3′-end are made free from salts and other components in the sequencing reaction by capture with streptavidin-coated magnetic beads. Only correctly terminated biotinylated DNA fragments are subsequently released and loaded onto a mass spectrometer to obtain accurate DNA sequencing data. Compared with gel electrophoresis-based sequencing systems, MS produces a very high resolution of DNA-sequencing fragments, fast separation on microsecond time scales, and completely eliminates the compressions associated with gel electrophoresis. The high resolution of MS allows accurate mutation and heterozygote detection. This optimized solid-phase DNA-sequencing chemistry plus future improvements in detector sensitivity for large DNA fragments in MS instrumentation will further improve MS for DNA sequencing.     

Efficient production of single-stranded DNA as long as 2 kb for sequencing of PCR-amplified DNA.

A modification of the asymmetric PCR method is described, which reliably facilitates sequencing of PCR-amplified DNA. This procedure produces single-stranded DNA fragments as long as two kilobases that are suitable for dideoxy DNA sequencing. First, a PCR for double-stranded DNA is preformed under optimal conditions (double-stranded PCR). Then, a 5-10-microliters fraction of the double-stranded PCR and a single primer are used to generate single-stranded DNA in a separate PCR (single-stranded PCR). The concentration of the single primer are used to generate single-stranded DNA in a separate PCR (single-stranded PCR). The concentration of the single primer is approximately 0.4 microM. Usually 15 to 25 cycles of single-stranded PCR are optimal to produce single-stranded DNA for four to eight sequencing reactions. The single-stranded DNA is purified by centrifugal ultrafiltration and used directly in dideoxy sequencing. This method was employed to produce high-quality single-stranded DNA templates from a variety of organisms for efficient DNA sequencing of PCR-amplified DNA.     

Use of a chemically modified T7 DNA polymerase for manual and automated sequencing of supercoiled DNA

Procedures are presented for reliable and accurate nucleotide sequence analysis using as template supercoiled DNA prepared by a modified rapid boiling minipreparation protocol. This method yields DNA templates suitable for sequencing within 1 h of bacterial harvest. We describe optimal reaction conditions for supercoiled miniprep DNA sequencing using a modified T7 DNA polymerase (Sequenase) in dideoxynucleotide chain termination reactions. We demonstrate that under these conditions, the sequencing data obtained with miniprep DNA is indistinguishable from that obtained with CsCl purified supercoiled DNA or from that obtained using single stranded DNA templates. We further show that the supercoiled DNA sequencing reactions can be analyzed on a commercially available automated DNA sequencing system that detects 32P labeled DNA during its electrophoretic separation. Taken together, these developments represent a significant improvement in the process of nucleotide sequence analysis.     

DNA sequence analysis by MALDI mass spectrometry.

Conventional DNA sequencing is based on gel electrophoretic separation of the sequencing products. Gel casting and electrophoresis are the time limiting steps, and the gel separation is occasionally imperfect due to aberrant mobility of certain fragments, leading to erroneous sequence determination. Furthermore, illegitimately terminated products frequently cannot be distinguished from correctly terminated ones, a phenomenon that also obscures data interpretation. In the present work the use of MALDI mass spectrometry for sequencing of DNA amplified from clinical samples is implemented. The unambiguous and fast identification of deletions and substitutions in DNA amplified from heterozygous carriers realistically suggest MALDI mass spectrometry as a future alternative to conventional sequencing procedures for high throughput screening for mutations. Unique features of the method are demonstrated by sequencing a DNA fragment that could not be sequenced conventionally because of gel electrophoretic band compression and the presence of multiple non-specific termination products. Taking advantage of the accurate mass information provided by MALDI mass spectrometry, the sequence was deduced, and the nature of the non-specific termination could be determined. The method described here increases the fidelity in DNA sequencing, is fast, compatible with standard DNA sequencing procedures, and amenable to automation.     

CircumVent thermal cycle sequencing and alternative manual and automated DNA sequencing protocols using the highly thermostable VentR (exo-) DNA polymerase.

CircumVent thermal cycle and standard DNA sequencing protocols utilizing the cloned and highly thermostable VentR (exo-) DNA polymerase are described. The thermal cycle sequencing procedures are advantageous because they allow fast and simple semiautomation of the sequencing reaction; make possible the direct DNA sequencing of PCR products, bacterial colonies and phage plaques; require only femtomoles of template DNA; eliminate the requirement of an independent primer annealing step; remove the requirement of denatured plasmids for sequencing double-stranded templates; and use a highly thermostable DNA polymerase for sequencing through potential recalcitrant secondary structure domains and large linear double-stranded DNA templates such as lambda derivatives. More standard methods of DNA sequencing (i.e., a one-step protocol and a labeling-termination protocol) are also presented. For each protocol, alternatives for choice of label and method of labeling are presented, including the use of 5' biotinylated primers for chemiluminescent DNA sequencing and fluorinated primers for automated sequencing using the BaseStation Automated DNA Sequencer.     

DNA sequencing technology and automatization of it]

Precise manipulations with genetic material, typical for modern experiments in molecular biology and in new biotechnology, require a capability to determine DNA base sequence. This capability enables today to exploit specific genetic knowledge for the dissection of complex cell processes and for modulation of cell metabolism in transgenic organisms. The review focuses on such DNA sequencing technologies that are widespread in general laboratory practice. They can safely be called, with the availability of commercial reagents, industrial techniques. Modern DNA sequencing requires recurrent breakdown of large genomic DNA into smaller pieces, that are then amplified, sequenced and the initial long stretch reconstructed via overlap of small pieces. The DNA sequencing process has several steps: a DNA fragment is obtained in sufficient quantity and purity, it is converted to a form suitable for a particular sequencing method, a sequencing reaction is performed and its products fractionated; and finally the resultant data are interpreted (i.e. an autoradiograph is read into a computer memory) and a long sequence in reconstructed via overlap of short stretches. These steps are considered in separate parts; an accent is made on sequencing strategies with respect to their biological task. In the last part, possibilities for automation of sequencing experiment are considered, followed by a discussion of domestic problems in DNA sequencing.     

纳米孔测序信号处理及其在DNA数据存储的应用

随着高通量测序技术的不断更新,可以在单个分子水平读取核苷酸序列的第三代测序技术迅速发展,纳米孔测序技术是其具有代表性的单分子测序技术,该技术通过检测DNA单链分子穿过纳米孔时引起的跨膜电流信号的变化,实现碱基识别.纳米孔测序仪在便携性、碱基读取速度、测序读段长度等方面较传统的第一代与第二代测序技术都有明显优势.随着纳米...     

Genomic sequencing of single microbial cells from environmental samples

Recently developed techniques allow genomic DNA sequencing from single microbial cells [Lasken RS: Single-cell genomic sequencing using multiple displacement amplification. Curr Opin Microbiol 2007, 10:510-516]. Here, we focus on research strategies for putting these methods into practice in the laboratory setting. An immediate consequence of single-cell sequencing is that it provides an alternative to culturing organisms as a prerequisite for genomic sequencing. The microgram amounts of DNA required as template are amplified from a single bacterium by a method called multiple displacement amplification (MDA) avoiding the need to grow cells. The ability to sequence DNA from individual cells will likely have an immense impact on microbiology considering the vast numbers of novel organisms, which have been inaccessible unless culture-independent methods could be used. However, special approaches have been necessary to work with amplified DNA. MDA may not recover the entire genome from the single copy present in most bacteria. Also, some sequence rearrangements can occur during the DNA amplification reaction. Over the past two years many research groups have begun to use MDA, and some practical approaches to single-cell sequencing have been developed. We review the consensus that is emerging on optimum methods, reliability of amplified template, and the proper interpretation of 'composite' genomes which result from the necessity of combining data from several single-cell MDA reactions in order to complete the assembly. Preferred laboratory methods are considered on the basis of experience at several large sequencing centers where >70% of genomes are now often recovered from single cells. Methods are reviewed for preparation of bacterial fractions from environmental samples, single-cell isolation, DNA amplification by MDA, and DNA sequencing.     

Heterogeneity and randomness of DNA methylation patterns in human embryonic stem cells

DNA methylation has been proposed to be important in many biological processes and is the subject of intense study. Traditional bisulfite genomic sequencing allows detailed high-resolution methylation pattern analysis of each molecule with haplotype information across a few hundred bases at each locus, but lacks the capacity to gather voluminous data. Although recent technological developments are aimed at assessing DNA methylation patterns in a high-throughput manner across the genome, the haplotype information cannot be accurately assembled when the sequencing reads are short or when each hybridization target only includes one or two cytosine-phosphate-guanine (CpG) sites. Whether a distinct and nonrandom DNA methylation pattern is present at a given locus is difficult to discern without the haplotype information, and the DNA methylation patterns are much less apparent because the data are often obtained only as methylation frequencies at each CpG site with some of these methods. It would facilitate the interpretation of data obtained from high-throughput bisulfite sequencing if the loci with nonrandom DNA methylation patterns could be distinguished from those that are randomly methylated. In this study, we carried out traditional genomic bisulfite sequencing using the normal diploid human embryonic stem (hES) cell lines, and utilized Hamming distance analysis to evaluate the existence of a distinct and nonrandom DNA methylation pattern at each locus studied. Our findings suggest that Hamming distance is a simple, quick, and useful tool to identify loci with nonrandom DNA methylation patterns and may be utilized to discern links between biological changes and DNA methylation patterns in the high-throughput bisulfite sequencing data sets.     

DNA sequencing with solid-phase-capturable dideoxynucleotides and energy transfer primers

False terminations occurring in fluorescent dye-primer DNA sequencing, and nonsequencing primer extension DNA fragments generated in dye-terminator sequencing cause background noise in fluorescent electropherograms, leading to errors in sequence determination. We describe here a DNA sequencing chemistry that produces accurate and clean sequencing data on a fluorescent DNA sequencer, eliminating the false terminations and background noise. The procedure involves coupling fluorescence energy transfer (ET) primers that produce high fluorescent signals with solid-phase-capturable biotinylated dideoxynucleotides to generate Sanger DNA sequencing fragments. After the sequencing reaction,the DNA extension fragments that carry a biotin at the 3' end are captured with streptavidin-coated magnetic beads, while the other components in the sequencing reaction are washed away. Only pure DNA extension products terminated by the biotinylated dideoxynucleotides are released from the magnetic beads and are loaded onto a sequencing gel to produce accurate sequencing data.     

An extended boiling method for small-scale preparation of plasmid DNA tailored to long-range automated sequencing

Automated fluorescence sequencing depends on high-quality plasmid DNA, which is conveniently prepared by minipreparation procedures. While those procedures are effective for high-copy number plasmids, purity and yields of low-copy number plasmids are often not sufficient to achieve reasonable sequencing results. Here, we describe a reproducible and cheap procedure for the small-scale preparation of plasmid DNA, which is based on the original Holmes and Quigley protocol, comprising a boiling and two selective precipitation steps. Besides various other modifications, this procedure utilizes polyethylene glycol (PEG) precipitation as a key step to further purify plasmid DNA tailored to automated fluorescence sequencing. Independent of the plasmid size and copy number, the modified procedure yields plasmid DNA, which gives average reading lengths of 800 and more bases with a standard fluorescence cycle sequencing protocol. To demonstrate the efficiency and reproducibility of the method, sequencing data of various human interleukin-6 gene variants cloned in different vectors are presented. This procedure offers an economical alternative to commercial miniprep kits, utilizing silica resins or anion-exchanger matrices and, moreover, is more reliable and consistent with respect to reading lengths and accuracy in automated fluorescence sequencing.     

Next-generation sequencing technologies for environmental DNA research

Since 2005, advances in next-generation sequencing technologies have revolutionized biological science. The analysis of environmental DNA through the use of specific gene markers such as species-specific DNA barcodes has been a key application of next-generation sequencing technologies in ecological and environmental research. Access to parallel, massive amounts of sequencing data, as well as subsequent improvements in read length and throughput of different sequencing platforms, is leading to a better representation of sample diversity at a reasonable cost. New technologies are being developed rapidly and have the potential to dramatically accelerate ecological and environmental research. The fast pace of development and improvements in next-generation sequencing technologies can reflect on broader and more robust applications in environmental DNA research. Here, we review the advantages and limitations of current next-generation sequencing technologies in regard to their application for environmental DNA analysis.     

A simple algorithm for quantifying DNA methylation levels on multiple independent CpG sites in bisulfite genomic sequencing electropherograms

DNA methylation at cytosines is a widely studied epigenetic modification. Methylation is commonly detected using bisulfite modification of DNA followed by PCR and additional techniques such as restriction digestion or sequencing. These additional techniques are either laborious, require specialized equipment, or are not quantitative. Here we describe a simple algorithm that yields quantitative results from analysis of conventional four-dye-trace sequencing. We call this method Mquant and we compare it with the established laboratory method of combined bisulfite restriction assay (COBRA). This analysis of sequencing electropherograms provides a simple, easily applied method to quantify DNA methylation at specific CpG sites.     

DNA sequencing by capillary electrophoresis (review)

DNA sequencing by capillary electrophoresis has been reviewed with an emphasis on progress during the last four years. The effects of sample purification, composition of sieving matrices, electric field strength, temperature, wall coating and DNA labeling on the DNA sequencing performance are discussed. Multicapillary array instrumentation is compared with one-capillary systems. Integrated systems that perform the whole DNA sequencing operation online starting from the DNA amplification through base calling and data processing are discussed.     

VSQual: a visual system to assist DNA sequencing quality control

A lack of pliant software tools that support small- to medium-scale DNA sequencing efforts is a major hindrance for recording and using laboratory workflow information to monitor the overall quality of data production. Here we describe VSQual, a set of Perl programs intended to provide simple and powerful tools to check several quality features of the sequencing data generated by automated DNA sequencing machines. The core program of VSQual is a flexible Perl-based pipeline, designed to be accessible and useful for both programmers and non-programmers. This pipeline directs the processing steps and can be easily customized for laboratory needs. Basically, the raw DNA sequencing trace files are processed by Phred and Cross_match, then the outputs are parsed, reformatted into Web-based graphical reports, and added to a Web site structure. The result is a set of real time sequencing reports easily accessible and understood by common laboratory people. These reports facilitate the monitoring of DNA sequencing as well as the management of laboratory workflow, significantly reducing operational costs and ensuring high quality and scientifically reliable results.     

Rapid identification of clones using the same degenerate oligonucleotide mixture for both screening and sequencing

A simple and rapid strategy for distinguishing between positively hybridizing colonies and false positive-hybridization signals is described. The isolation of a specific DNA sequence depends on the ability to distinguish between a clone that contains the correct sequence and a false hybridization-positive or background signal. This procedure utilizes the same oligonucleotide mixture both as a screening probe and as a sequencing primer. The mixture of oligonucleotides is used as a primer to obtain sequence information directly from double-stranded DNA. Conditions for sequencing with oligonucleotides having up to 64-fold degeneracy are described. Since the sequence information obtained is directly adjacent to the site of oligonucleotide:DNA hybridization, it is necessary to know only a minimal length of DNA or peptide sequence to both design oligonucleotide probes and confirm the authenticity of the hybridization positives. The advantages of the degenerate oligonucleotide sequencing method include the rapid, reliable identification of authentic versus false hybridization positives made directly without subcloning into single-stranded M13 phage, without sequencing large regions of DNA, or without synthesizing sequence-specific primers.     

Going beyond five bases in DNA sequencing

DNA sequencing has provided a wealth of information about biological systems, but thus far has focused on the four canonical bases, and 5-methylcytosine through comparison of the genomic DNA sequence to a transformed four-base sequence obtained after treatment with bisulfite. However, numerous other chemical modifications to the nucleotides are known to control fundamental life functions, influence virulence of pathogens, and are associated with many diseases. These modifications cannot be accessed with traditional sequencing methods. In this opinion, we highlight several emerging single-molecule sequencing techniques that have the potential to directly detect many types of DNA modifications as an integral part of the sequencing protocol.     

One-way sequencing of multiple amplicons from tandem repetitive mitochondrial DNA control region

Repetitive DNA sequences not only exist abundantly in eukaryotic nuclear genomes, but also occur as tandem repeats in many animal mitochondrial DNA (mtDNA) control regions. Due to concerted evolution, these repetitive sequences are highly similar or even identical within a genome. When long repetitive regions are the targets of amplification for the purpose of sequencing, multiple amplicons may result if one primer has to be located inside the repeats. Here, we show that, without separating these amplicons by gel purification or cloning, directly sequencing the mitochondrial repeats with the primer outside repetitive region is feasible and efficient. We exemplify it by sequencing the mtDNA control region of the mosquito Aedes albopictus, which harbors typical large tandem DNA repeats. This one-way sequencing strategy is optimal for population surveys.     

Dideoxy nucleoside triphosphate (ddNTP) analogues: Synthesis and polymerase substrate activities of pyrrolidinyl nucleoside triphosphates (prNTPs)

The dideoxynucleoside triphosphates (ddNTPs) terminate the bio-polymerization of DNA and become essential chemical component of DNA sequencing technology which is now basic tool for molecular biology research. In this method the radiolabeled or fluorescent dye labeled ddNTP analogues are being used for DNA sequencing by detection of the terminated DNA fragment after single labeled ddNTP incorporation into DNA under PCR conditions. This report describes the syntheses of rationally designed novel amino-functionalized ddNTP analogue such as Pyrrolidine nucleoside triphosphates (prNTPs), and their polymerase activities with DNA polymerase by LC–MS and Gel-electrophoretic techniques. The Mass and PAGE analyses strongly support the incorporation of prNTPs into DNA oligonucleotide with Therminator DNA polymerase as like control substrate ddNTP. As resultant the DNA oligonucleotide are functionalized as amine group by prNTP incorporation with polymerase. Hence prNTPs provide opportunities to prepare demandable conjugated DNA with other biomolecules/dyes/fluorescence molecule without modifying nucleobase structure.