Binding of protoporphyrin IX and metal derivatives to the active site of wild-type mouse ferrochelatase at low porphyrin-to-protein ratios

Resonance Raman (RR) spectroscopy is used to examine porphyrin substrate, product, and inhibitor interactions with the active site of murine ferrochelatase (EC 4.99.1.1), the terminal enzyme in the biosynthesis of heme. The enzyme catalyzes in vivo Fe(2+) chelation into protoporphyrin IX to give heme. The RR spectra of native ferrochelatase show that the protein, as isolated, contains varying amounts of endogenously bound high- or low-spin ferric heme, always at much less than 1 equiv. RR data on the binding of free-base protoporphyrin IX and its metalated complexes (Fe(III), Fe(II), and Ni(II)) to active wild-type protein were obtained at varying ratios of porphyrin to protein. The binding of ferric heme, a known inhibitor of the enzyme, leads to the formation of a low-spin six-coordinate adduct. Ferrous heme, the enzyme's natural product, binds in the ferrous high-spin five-coordinate state. Ni(II) protoporphyrin, a metalloporphyrin that has a low tendency toward axial ligation, becomes distorted when bound to ferrochelatase. Similarly for free-base protoporphyrin, the natural substrate of ferrochelatase, the RR spectra of porphyrin-protein complexes reveal a saddling distortion of the porphyrin. These results corroborate and extend our previous findings that porphyrin distortion, a crucial step of the catalytic mechanism, occurs even in the absence of bound metal substrate. Moreover, RR data reveal the presence of an amino acid residue in the active site of ferrochelatase which is capable of specific axial ligation to metals.     

Nickel(II) chelatase variants directly evolved from murine ferrochelatase: porphyrin distortion and kinetic mechanism

The heme biosynthetic pathway culminates with the ferrochelatase-catalyzed ferrous iron chelation into protoporphyrin IX to form protoheme. The catalytic mechanism of ferrochelatase has been proposed to involve the stabilization of a nonplanar porphyrin to present the pyrrole nitrogens to the metal ion substrate. Previously, we hypothesized that the ferrochelatase-induced nonplanar distortions of the porphyrin substrate impose selectivity for the divalent metal ion incorporated into the porphyrin ring and facilitate the release of the metalated porphyrin through its reduced affinity for the enzyme. Using resonance Raman spectroscopy, the structural properties of porphyrins bound to the active site of directly evolved Ni(2+)-chelatase variants are now examined with regard to the mode and extent of porphyrin deformation and related to the catalytic properties of the enzymes. The Ni(2+)-chelatase variants (S143T, F323L, and S143T/F323L), which were directly evolved to exhibit an enhanced Ni(2+)-chelatase activity over that of the parent wild-type ferrochelatase, induced a weaker saddling deformation of the porphyrin substrate. Steady-state kinetic parameters of the evolved variants for Ni(2+)- and Fe(2+)-chelatase activities increased compared to those of wild-type ferrochelatase. In particular, the reduced porphyrin saddling deformation correlated with increased catalytic efficiency toward the metal ion substrate (Ni(2+) or Fe(2+)). The results lead us to propose that the decrease in the induced protoporphyrin IX saddling mode is associated with a less stringent metal ion preference by ferrochelatase and a slower porphyrin chelation step.     

Modulation of inhibition of ferrochelatase by N-methylprotoporphyrin

Protoporhyrin IX ferrochelatase catalyses the terminal step of the haem-biosynthetic pathway by inserting ferrous iron into protoporphyrin IX. NMPP (N-methylprotoporphyrin), a transition-state analogue and potent inhibitor of ferrochelatase, is commonly used to induce haem deficiency in mammalian cell cultures. To create ferrochelatase variants with different extents of tolerance towards NMPP and to understand further the mechanism of ferrochelatase inhibition by NMPP, we isolated variants with increased NMPP resistance, bearing mutations in an active-site loop (murine ferrochelatase residues 248-257), which was previously shown to mediate a protein conformational change triggered by porphyrin binding. The kinetic mechanisms of inhibition of two variants, in which Pro255 was replaced with either arginine (P255R) or glycine (P255G), were investigated and compared with that of wild-type ferrochelatase. While the binding affinity of the P255X variants for NMPP decreased by one order of magnitude in relation to that of wild-type enzyme, the inhibition constant increased by approximately two orders of magnitude (K(i)(app) values of 1 microM and 2.3 microM for P255R and P255G respectively, as against 3 nM for wild-type ferrochelatase). Nonetheless, the drastically reduced inhibition of the variants by NMPP was not paralleled with a decrease in specificity constant (kcat/K(m, protoporhyrin IX)) and/or catalytic activity (kcat). Further, although NMPP binding to either wild-type ferrochelatase or P255R occurred via a similar two-step kinetic mechanism, the forward and reverse rate constants associated with the second and rate-limiting step were comparable for the two enzymes. Collectively, these results suggest that Pro255 has a crucial role in maintaining an appropriate protein conformation and modulating the selectivity and/or regiospecificity of ferrochelatase.     

Amino acid residues His183 and Glu264 in Bacillus subtilis ferrochelatase direct and facilitate the insertion of metal ion into protoporphyrin IX

Ferrochelatase catalyzes the terminal step in the heme biosynthetic pathway, i.e., the incorporation of Fe(II) into protoporphyrin IX. Various biochemical and biophysical methods have been used to probe the enzyme for metal binding residues and the location of the active site. However, the location of the metal binding site and the path of the metal into the porphyrin are still disputed. Using site-directed mutagenesis on Bacillus subtilis ferrochelatase we demonstrate that exchange of the conserved residues His183 and Glu264 affects the metal affinity of the enzyme. We also present the first X-ray crystal structure of ferrochelatase with iron. Only a single iron was found in the active site, coordinated in a square pyramidal fashion by two amino acid residues, His183 and Glu264, and three water molecules. This iron was not present in the structure of a His183Ala modified ferrochelatase. The results strongly suggest that the insertion of a metal ion into protoporphyrin IX by ferrochelatase occurs from a metal binding site represented by His183 and Glu264.     

Impaired expression of the plastidic ferrochelatase by antisense RNA synthesis leads to a necrotic phenotype of transformed tobacco plants

Protoporphyrin IX is the last common intermediate of tetrapyrrole biosynthesis. The chelation of a Mg2+ ion by magnesium chelatase and of a ferrous ion by ferrochelatase directs protoporphyrin IX towards the formation of chlorophyll and heme, respectively. A full length cDNA clone encoding a ferrochelatase was identified from a Nicotiana tabacum cDNA library. The encoded protein consists of 497 amino acid residues with a molecular weight of 55.4 kDa. In vitro import of the protein into chloroplasts and its location in stroma and thylakoids confirm its close relationship to the previously described Arabidopsis thaliana plastid-located ferrochelatase (FeChII). A 1700-bp tobacco FeCh cDNA sequence was expressed in Nicotiana tabacum cv. Samsun NN under the control of the CaMV 35S promoter in antisense orientation allowing investigation into the consequences of selective reduction of the plastidic ferrochelatase activity for protoporphyrin IX channeling in chloroplasts and for interactions between plastidic and mitochondrial heme synthesis. Leaves of several transformants showed a reduced chlorophyll content and, during development, a light intensity-dependent formation of necrotic leaf lesions. In comparison with wild-type plants the total ferrochelatase activity was decreased in transgenic lines leading to an accumulation of photosensitizing protoporphyrin IX. Ferrochelatase activity was reduced only in plastids but not in mitochondria of transgenic plants. By means of the specifically diminished ferrochelatase activity consequences of the selective inhibition of protoheme formation for the intracellular supply of heme can be investigated in the future.     

Metallation of the transition-state inhibitor N-methyl mesoporphyrin by ferrochelatase: implications for the catalytic reaction mechanism

Insertion of metals into various tetrapyrroles is catalysed by a group of enzymes called chelatases, e.g. nickel, cobalt, magnesium and ferro-chelatase. It has been proposed that catalytic metallation includes distorting the porphyrin substrate by the enzyme towards a transition state-like geometry in which at least one of the pyrrole rings will be available for metal chelation. Here, we present a study of metal insertion into the transition-state inhibitor of protoporphyrin IX ferrochelatase, N-methyl mesoporphyrin (N-MeMP), by time-resolved crystallography and mass spectrometry with and without the presence of ferrochelatase. The results show that metallation of N-MeMP has a very limited effect on the conformation of the residues that participate in porphyrin and metal binding. These findings support theoretical data, which indicate that product release is controlled largely by the strain created by metal insertion into the distorted porphyrin. The results suggest that, similar to non-catalytic metallation of N-MeMP, the ferrochelatase-assisted metallation depends on the ligand exchange rate for the respective metal. Moreover, ferrochelatase catalyses insertion of Cu(II) and Zn(II) into N-MeMP with a rate that is about 20 times faster than non-enzymatic metallation in solution, suggesting that the catalytic strategy of ferrochelatase includes a stage of acceleration of the rate of ligand exchange for the metal substrate. The greater efficiency of N-MeMP metallation by Cu(II), as compared to Zn(II), contrasts with the K(m) values for Zn(II) (17 microM) and Cu(II) (170 microM) obtained for metallation of protoporphyrin IX. We suggest that this difference in metal specificity depends on the type of distortion imposed by the enzyme on protoporphyrin IX, which is different from the intrinsic non-planar distortion of N-MeMP. A mechanism of control of metal specificity by porphyrin distortion may be general for different chelatases, and may have common features with the mechanism of metal specificity in crown ethers.     

Common chelatase design in the branched tetrapyrrole pathways of heme and anaerobic cobalamin synthesis.

Prosthetic groups such as heme, chlorophyll, and cobalamin (vitamin B(12)) are characterized by their branched biosynthetic pathway and unique metal insertion steps. The metal ion chelatases can be broadly classed either as single-subunit ATP-independent enzymes, such as the anaerobic cobalt chelatase and the protoporphyrin IX (PPIX) ferrochelatase, or as heterotrimeric, ATP-dependent enzymes, such as the Mg chelatase involved in chlorophyll biosynthesis. The X-ray structure of the anaerobic cobalt chelatase from Salmonella typhimurium, CbiK, has been solved to 2.4 A resolution. Despite a lack of significant amino acid sequence similarity, the protein structure is homologous to that of Bacillus subtilis PPIX ferrochelatase. Both enzymes contain a histidine residue previously identified as the metal ion ligand, but CbiK contains a second histidine in place of the glutamic acid residue identified as a general base in PPIX ferrochelatase. Site-directed mutagenesis has confirmed a role for this histidine and a nearby glutamic acid in cobalt binding, modulating metal ion specificity as well as catalytic efficiency. Contrary to the predicted protoporphyrin binding site in PPIX ferrochelatase, the precorrin-2 binding site in CbiK is clearly defined within a large horizontal cleft between the N- and C-terminal domains. The structural similarity has implications for the understanding of the evolution of this branched biosynthetic pathway.     

QM/MM study of the insertion of metal ion into protoporphyrin IX by ferrochelatase

Ferrochelatase catalyzes the metallation of protoporphyrin IX in the terminal step of heme biosynthesis. Mutations in the ferrochelatase gene can lead to the disease erythropoietic porphyria. The catalyzing mechanism of ferrochelatase is still not fully understood. In this paper, we have studied the insertion of Fe²⁺ into the protoporphyrin IX ring by Bacillussubtilis ferrochelatase using combined quantum mechanical and molecular mechanics (QM/MM) calculations. Geometries were optimized at the BP86/6-31G∗ level and energies were calculated at the B3LYP/TZVP level. The overall process involves the stepwise displacement of Glu-264, His-183, and a water molecule from Fe²⁺, and the removal of two protons from the porphyrin ring. The rate-determining step is the cleavage of the bond between the oxygen atom of Glu-264 and Fe²⁺, concomitant with the formation of the first Fe-N bond. It has an energy barrier of 57 kJ mol⁻¹. The porphyrin ring is only slightly distorted in the enzyme active site. The residue Tyr-13 plays a key role for the catalytic process extracting two protons from protoporphyrin IX.     

Identification and characterization of an inhibitory metal ion-binding site in ferrochelatase

Ferrochelatase catalyzes the insertion of ferrous iron into protoporphyrin IX to form heme. The severe metal ion substrate inhibition observed during in vitro studies of the purified enzyme is almost completely eliminated by mutation of an active site histidine residue (His-287, murine ferrochelatase numbering) to leucine and reduced over 2 orders of magnitude by mutation of a nearby conserved phenylalanine residue (Phe-283) to leucine. Elimination of substrate inhibition had no effect on the apparent V(max) for Ni(2+), but the apparent K(m) was increased 100-fold, indicating that the integrity of the inhibitory binding site is important for the enzyme to turn over substrates rapidly at low micromolar metal ion concentrations. The inhibitory site was observed to have a pK(a) value of 8.0, and this value was reduced to 7.5 by the F283L mutation and to 7.4 in a naturally occurring positional variant observed in most bacterial ferrochelatases, murine ferrochelatase H287C. A H287N variant was also found to be substrate-inhibited, but unlike the H287C variant, pH dependence of substrate inhibition was largely eliminated. The data indicate that the inhibitory metal ion-binding site is composed of multiple residues but primarily defined by His-287 and Phe-283 and is crucial for optimal activity at low metal ion concentrations. It is proposed that this binding site may be important for ferrous iron acquisition and desolvation in vivo.     

Metal ion substrate inhibition of ferrochelatase

Ferrochelatase catalyzes the insertion of ferrous iron into protoporphyrin IX to form heme. Robust kinetic analyses of the reaction mechanism are complicated by the instability of ferrous iron in aqueous solution, particularly at alkaline pH values. At pH 7.00 the half-life for spontaneous oxidation of ferrous ion is approximately 2 min in the absence of metal complexing additives, which is sufficient for direct comparisons of alternative metal ion substrates with iron. These analyses reveal that purified recombinant ferrochelatase from both murine and yeast sources inserts not only ferrous iron but also divalent cobalt, zinc, nickel, and copper into protoporphyrin IX to form the corresponding metalloporphyrins but with considerable mechanistic variability. Ferrous iron is the preferred metal ion substrate in terms of apparent k(cat) and is also the only metal ion substrate not subject to severe substrate inhibition. Substrate inhibition occurs in the order Cu(2+) > Zn(2+) > Co(2+) > Ni(2+) and can be alleviated by the addition of metal complexing agents such as beta-mercaptoethanol or imidazole to the reaction buffer. These data indicate the presence of two catalytically significant metal ion binding sites that may coordinately regulate a selective processivity for the various potential metal ion substrates.     

The role of product release in enzyme catalysis.

Conceptual definitions of maximal velocity and the Michaelis constant are provided that do not involve the assumption of any rate-determining step. The experimental basis of those definitions is a combination of pre-steady state and steady state kinetic observations.     

Relationship of stopped flow to steady state parameters in the dimeric copper amine oxidase from Hansenula polymorpha and the role of zinc in inhibiting activity at alternate copper-containing subunits

The expression of a copper amine oxidase (CAO) from Hansenula polymorpha in Saccharomyces cerevisiae under differing culture conditions leads to the incorporation of varied levels of CAO-bound zinc. The presence of substantial amount of zinc results in two distinctive enzyme species, designated as the fast and slow enzymes. Both forms are rapidly reduced by substrate methylamine with a rate constant of 199 s(-1) but behave remarkably differently in their oxidation rates; the fast enzyme is oxidized by dioxygen at a rate of 22.1 s(-1), whereas the slow enzyme reacts at a rate of 1.8 x 10(-4) s(-1). The apparent kcat of the enzyme preparation is linearly proportional to the fraction of the fast enzyme, with an extrapolated value of 6.17 s(-1) when the enzyme is 100% in its "fast" form. A comparison of rate constants for cofactor reduction and reoxidation steps, measured in stopped flow experiments, to the extrapolated kcat implicates additional steps in the steady state reaction. Measurement of the proportion of oxidized (ETPQ(ox)) and reduced cofactor (ETPQ(red)) under steady state conditions indicates approximately 50% of each cofactor form at 0.8 or 2 mM methylamine. Kinetic isotope effect measurements using deuterated amine substrate lead to the following steady state values: (D)(k(red)) = 8.5 (0.5), (D)(kcat) = 1.7 (0.1), and (D)(kcat/K(m)) = 4.3 (0.2). The collective data allow the calculation of partially rate-determining constants during the reductive half-reaction (ca. 200 s(-1) for binding of substrate to ETPQ(ox) and 27.9 s(-1) for release of aldehyde product or a protein isomerization from ETPQ(red)); an additional step with a rate constant of 13.2 s(-1) is assigned to the oxidative half-reaction, most likely for the release of product hydrogen peroxide. These results, together with the sole detection of oxidized and reduced cofactor during rapid scanning stopped flow experiments, indicate that four steps contribute to kcat, with the first electron transfer from cofactor to O2 contributing ca. 29%. An investigation of the relationship between the copper content and the extent of the fast enzyme shows that only the copper-containing homodimer is capable of rapid reoxidation and that zinc-copper heterodimers are incapable of rapid turnover at either subunit. This implies communication between the metal sites of the two subunits per dimer that impacts O2 binding and/or electron transfer from reduced cofactor to bound O2.     

Is it possible for Fe2+ to approach protoporphyrin IX from the side of Tyr-13 in Bacillus subtilis ferrochelatase? An answer from QM/MM study

We previously reported the insertion process of the ferrous ion into the protoporphyrin IX from the side of the residue His-183 (J. Inorg. Biochem. 103 (2009) 1680–1686). Sellers et al. suggested that the ferrous ion probably approaches the protoporphyrin IX via the opposite side in the human enzyme. In this paper, we simulated the insertion process of Fe²⁺ into the protoporphyrin IX from the side of the residue Tyr-13 at the opposite site of His-183 by QM/MM method on Bacillus subtilis ferrochelatase. The model was built with Fe²⁺ ion coordinated by Tyr-13, His-88 and two water molecules. Geometries were optimized at the BP86/6-31G* level and energies were calculated at the B3LYP/6-311+G(2d,2p) level. The overall process involves the displacement of the residues Tyr-13, His-88 and one water molecule and deprotonation of the porphyrin ring. All the local minimum structures and energy barriers were obtained and an optimal insertion pathway was suggested. The rate-determining step is the removing of the second proton from the porphyrin accompanied by the formation of the fourth Fe-N bond with an energy barrier of 138.00 kJ/mol.     

Direct measurement of metal-ion chelation in the active site of the AAA+ ATPase magnesium chelatase

Magnesium chelatase catalyzes the first committed step in chlorophyll biosynthesis. This complex enzyme has at least three substrates and couples ATP hydrolysis to the insertion of Mg2+ into protoporphyrin IX. We directly observed metal-ion chelation fluorometrically, providing the first data describing the on-enzyme reaction. We describe the transient-state kinetics of magnesium chelatase with direct observation of the evolution of an enzyme-product complex EMgDIX. We demonstrate that MgATP2- binding occurs after the rate-determining step. As nucleotide hydrolysis is essential for the overall reaction this must also occur after the rate-determining step. This provides the first evidence for the synchronization of the ATPase and chelatase pathways and suggests a mechanism where nucleotide binding acts to clamp the chelatase in a product complex. Comparison of rate constants for the slow step in the reaction with further transient kinetics under conditions where multiple turnovers can occur reveals that an additional activation step is required to explain the behavior of magnesium chelatase. These data provide a new view of the sequence of events occurring in the reaction catalyzed by magnesium chelatase.     

The importance of porphyrin distortions for the ferrochelatase reaction

Ferrochelatase is the terminal enzyme in haem biosynthesis, i.e. the enzyme that inserts a ferrous ion into the porphyrin ring. Suggested reaction mechanisms for this enzyme involve a distortion of the porphyrin ring when it is bound to the enzyme. We have examined the energetics of such distortions using various theoretical calculations. With the density functional B3LYP method we calculate how much energy it costs to tilt one of the pyrrole rings out of the porphyrin plane for an isolated porphyrin molecule without or with a divalent metal ion in the centre of the ring. A tilt of 30 degrees costs 65-130 kJ/mol for most metal ions, but only approximately 48 kJ/mol for free-base (neutral) porphine. This indicates that once the metal is inserted, the porphyrin becomes stiffer and flatter, and therefore binds with lower affinity to a site designed to bind a distorted porphyrin. This would facilitate the release of the product from ferrochelatase. This proposal is strengthened by the fact that the only tested metal ion with a lower distortion energy than free-base porphyrin (Cd(2+)) is an inhibitor of ferrochelatase. Moreover, it costs even less energy to tilt a doubly deprotonated porphine(2-) molecule. This suggests that the protein may lower the acid constant of the pyrrole nitrogen atoms by deforming the porphyrin molecule. We have also estimated the structure of the protoporphyrin IX substrate bound to ferrochelatase using combined quantum chemical and molecular mechanics calculations. The result shows that the protein may distort the porphyrin by approximately 20 kJ/mol, leading to a distinctly non-planar structure. All four pyrrole rings are tilted out of the porphyrin mean plane (1-16 degrees ) but most towards the putative binding site of the metal ion. The predicted tilt is considerably smaller than that observed in the crystal structure of a porphyrin inhibitor.     

A BchD (magnesium chelatase) mutant of rhodobacter sphaeroides synthesizes zinc bacteriochlorophyll through novel zinc-containing intermediates

Heme and bacteriochlorophyll a (BChl) biosyntheses share the same pathway to protoporphyrin IX, which then branches as follows. Fe(2+) chelation into the macrocycle by ferrochelatase results in heme formation, and Mg(2+) addition by Mg-chelatase commits the porphyrin to BChl synthesis. It was recently discovered that a bchD (Mg-chelatase) mutant of Rhodobacter sphaeroides produces an alternative BChl in which Mg(2+) is substituted by Zn(2+). Zn-BChl has been found in only one other organism before, the acidophilic Acidiphilium rubrum. Our objectives in this work on the bchD mutant were to 1) elucidate the Zn-BChl biosynthetic pathway in this organism and 2) understand causes for the low amounts of Zn-BChl produced. The bchD mutant was found to contain a Zn-protoporphyrin IX pool, analogous to the Mg-protoporphyrin IX pool found in the wild type strain. Inhibition of ferrochelatase with N-methylprotoporphyrin IX caused Zn-protoporphyrin IX and Zn-BChl levels to decline by 80-90% in the bchD mutant, whereas in the wild type strain, Mg-protoporphyrin IX and Mg-BChl levels increased by 170-240%. Two early metabolites of the Zn-BChl pathway were isolated from the bchD mutant and identified as Zn-protoporphyrin IX monomethyl ester and divinyl-Zn-protochlorophyllide. Our data support a model in which ferrochelatase synthesizes Zn-protoporphyrin IX, and this metabolite is acted on by enzymes of the BChl pathway to produce Zn-BChl. Finally, the low amounts of Zn-BChl in the bchD mutant may be due, at least in part, to a bottleneck upstream of the step where divinyl-Zn-protochlorophyllide is converted to monovinyl-Zn-protochlorophyllide.     

Mouse protoporphyrinogen oxidase. Kinetic parameters and demonstration of inhibition by bilirubin.

The penultimate step of haem biosynthesis, the oxidation of protoporphyrinogen to protoporphyrin, was examined with purified murine hepatic protoporphyrinogen oxidase (EC 1.3.3.4) in detergent solution. The kinetic parameters for the two-substrate (protoporphyrinogen and oxygen) reaction were determined. The limiting Km for protoporphyrinogen when oxygen is saturating is 6.6 microM, whereas the Km for oxygen with saturating concentrations of protoporphyrinogen is 125 microM. The kcat. for the overall reaction is 447 h-1. The ratio of kcat. to the Km for protoporphyrinogen is approx. 20-fold greater than the kcat./Km,O2 ratio. The ratio of protoporphyrin formed to dioxygen consumed is 1:3. Ubiquinone-6, ubiquinone-10 and dicoumarol stimulate protoporphyrinogen oxidase activity at low concentrations (less than 15 microM), whereas coenzyme Q0 and menadione show no activation at these concentrations. Above 30 microM, all five quinones inhibit the enzyme activity. FAD does not significantly affect the activity of the enzyme. Bilirubin, a product of haem catabolism, is shown to be a competitive inhibitor of the penultimate enzyme of the haem-biosynthetic pathway, protoporphyrinogen oxidase, with a calculated Ki of 25 microM. The terminal enzyme of haem-biosynthetic pathway, namely ferrochelatase, is not inhibited by bilirubin at concentrations over double the Ki value for the oxidase. In contrast with other enzymic systems, the toxicity of bilirubin is not reversed by binding to albumin.     

Product Release Rather than Chelation Determines Metal Specificity for Ferrochelatase

Ferrochelatase (protoheme ferrolyase, E.C. 4.99.1.1) is the terminal enzyme in heme biosynthesis and catalyzes the insertion of ferrous iron into protoporphyrin IX to form protoheme IX (heme). Within the past two years, X-ray crystallographic data obtained with human ferrochelatase have clearly shown that significant structural changes occur during catalysis that are predicted to facilitate metal insertion and product release. One unanswered question about ferrochelatase involves defining the mechanism whereby some metals, such as divalent Fe, Co, Ni, and Zn, can be used by the enzyme in vitro to produce the corresponding metalloporphyrins, while other metals, such as divalent Mn, Hg, Cd, or Pb, are inhibitors of the enzyme. Through the use of high-resolution X-ray crystallography along with characterization of metal species via their anomalous diffraction, the identity and position of Hg, Cd, Ni, or Mn in the center of enzyme-bound porphyrin macrocycle were determined. When Pb, Hg, Cd, or Ni was present in the macrocycle, the conserved π helix was in the extended, partially unwound “product release” state. Interestingly, in the structure of ferrochelatase with Mn-porphyrin bound, the π helix is not extended or unwound and is in the “substrate-bound” conformation. These findings show that at least in the cases of Mn, Pb, Cd, and Hg, metal “inhibition” of ferrochelatase is not due to the inability of the enzyme to insert the metal into the macrocycle or by binding to a second metal binding site as has been previously proposed. Rather, inhibition occurs after metal insertion and results from poor or diminished product release. Possible explanations for the lack of product release are proposed herein.     

Transient kinetic and deuterium isotope effect studies on the catalytic mechanism of phosphoglycerate dehydrogenase.

The catalytic mechanism of the phosphoglycerate dehydrogenase reaction in both directions was investigated by studying: (a) pre-steady state transients in reduced coenzyme appearance or disappearance or disappearance and in protein fluorescence; (b) deuterium isotope effects on the transients and on the steady state reactions; and (c) the partial reaction between the enzyme-NADH complex and hydroxypyruvate-P. These studies led to the scheme below for the ternary complex interconversion. E1-NADH-hydroxypyruvate-P(1)equilibriumE2-NADH-hydroxypyruvate-P(2)equilibriumE3-NADH-hydroxypyruvate-P + H+(3)equilibriumE3-NAD+-3-phosphoglycerate(4)equilibriumE4-NAD+-3-phosphoglycerate Steps 1,2, and 4 are ternary complex isomerizations. Step 3 is the hydride transfer. Under steady state conditions isomerization 2 is the rate-determining step in the direction of hydroxypyruvate-P reduction at higher pH values. At lower pH values, the hydride transfer step is also partially rate-determining. The rate-determining step in the direction of 3-phosphoglycerate oxidation occurs subsequent to the hydride transfer step at higher pH values. At lower pH values the rate is determined by both isomerization 4 and the hydride transfer step. Isomerizations 1, 2, and 4 were inhibited by serine, an allosteric inhibitor, indicating that the inactive conformation of the enzyme is incapable of performing any of the steps of the ternary complex interconversion. Phosphoglycerate dehydrogenase corresponds to a V-type allosteric enzyme. When the enzyme-NADH complex was mixed with hydroxypyruvate-P at pH 8.5, a rapid quenching of enzymebound NADH fluorescence occurred. This process was studied under pseudo-first order conditions and shown to be the result of hydroxypyruvate-P binding.     

Binding of the factor IX gamma-carboxyglutamic acid domain to the vitamin K-dependent gamma-glutamyl carboxylase active site induces an allosteric effect that may ensure processive carboxylation and regulate the release of carboxylated product

Propeptides of the vitamin K-dependent proteins bind to an exosite on gamma-glutamyl carboxylase; while they are bound, multiple glutamic acids in the gamma-carboxyglutamic acid (Gla) domain are carboxylated. The role of the propeptides has been studied extensively; however, the role of the Gla domain in substrate binding is less well understood. We used kinetic and fluorescence techniques to investigate the interactions of the carboxylase with a substrate containing the propeptide and Gla domain of factor IX (FIXproGla41). In addition, we characterized the effect of the Gla domain and carboxylation on propeptide and substrate binding. For the propeptide of factor IX (proFIX18), FIXproGla41, and carboxylated FIXproGla41, the Kd values were 50, 2.5, and 19.7 nM and the koff values were 273 x 10(-5), 9 x 10(-5), and 37 x 10(-5) s(-1), respectively. The koff of proFIX18 is reduced 3-fold by FLEEL and 9-fold by the Gla domain (residues 1-46) of FIX. The pre-steady state rate constants for carboxylation of FIXproGla41 was 0.02 s(-1) in enzyme excess and 0.016 s(-1) in substrate excess. The steady state rate in substrate excess is 4.5 x 10(-4) s(-1). These results demonstrate the following. 1) The pre-steady state carboxylation rate constant of FIXproGla41 is significantly slower than that of FLEEL. 2) The Gla domain plays an allosteric role in substrate-enzyme interactions. 3) Carboxylation reduces the allosteric effect. 4) The similarity between the steady state carboxylation rate constant and product dissociation rate constant suggests that product release is rate-limiting. 5) The increased dissociation rate after carboxylation contributes to the release of product.