Structural and biochemical characterization of DSL ribozyme

We recently reported on the molecular design and synthesis of a new RNA ligase ribozyme (DSL), whose active site was selected from a sequence library consisting of 30 random nucleotides set on a defined 3D structure of a designed RNA scaffold. In this study, we report on the structural and biochemical analyses of DSL. Structural analysis indicates that the active site, which consists of the selected sequence, attaches to the folded scaffold as designed. To see whether DSL resembles known ribozymes, a biochemical assay was performed. Metal-dependent kinetic studies suggest that the ligase requires Mg2+ ions. The replacement of Mg2+ with Co(NH3)6(3+) prohibits the reaction, indicating that DSL requires innersphere coordination of Mg2+ for a ligation reaction. The results show that DSL has requirements similar to those of previously reported catalytic RNAs.     

Similarities between a predicted secondary structure for the M1 RNA ribozyme and the tRNA binding center of 16 S rRNA from E. coli

We propose a new model for the secondary structure of the M1 RNA component of E. coli RNase P which is based on significant sequence homologies with parts of the E. coli 16 S rRNA. A large domain of the new model resembles closely the secondary structure of the tRNA binding center of 16 S rRNA. We suggest that this domain of M1 RNA when functioning as a ribozyme binds the mature part of the precursor tRNA.     

An alternative route for the folding of large RNAs: apparent two-state folding by a group II intron ribozyme

Despite a growing literature on the folding of RNA, our understanding of tertiary folding in large RNAs derives from studies on a small set of molecular examples, with primary focus on group I introns and RNase P RNA. To broaden the scope of RNA folding models and to better understand group II intron function, we have examined the tertiary folding of a ribozyme (D135) that is derived from the self-splicing ai5gamma intron from yeast mitochondria. The D135 ribozyme folds homogeneously and cooperatively into a compact, well-defined tertiary structure that includes all regions critical for active-site organization and substrate recognition. When D135 was treated with increasing concentrations of Mg(2+) and then subjected to hydroxyl radical footprinting, similar Mg(2+) dependencies were seen for internalization of all regions of the molecule, suggesting a highly cooperative folding behavior. In this work, we show that global folding and compaction of the molecule have the same magnesium dependence as the local folding previously observed. Furthermore, urea denaturation studies indicate highly cooperative unfolding of the ribozyme that is governed by thermodynamic parameters similar to those for forward folding. In fact, D135 folds homogeneously and cooperatively from the unfolded state to its native, active structure, thereby demonstrating functional reversibility in RNA folding. Taken together, the data are consistent with two-state folding of the D135 ribozyme, which is surprising given the size and multi-domain structure of the RNA. The findings establish that the accumulation of stable intermediates prior to formation of the native state is not a universal feature of RNA folding and that there is an alternative paradigm in which the folding landscape is relatively smooth, lacking rugged features that obstruct folding to the native state.     

Characterization of the B6.61 polymerase ribozyme accessory domain

The "RNA world" hypothesis rests on the assumption that RNA polymerase ribozymes can replicate RNA without the use of protein. In the laboratory, in vitro selection has been used to create primitive versions of such polymerases. The best variant to date is a ribozyme called B6.61 that can extend a RNA primer template by 20 nucleotides (nt). This polymerase has two domains: the recently crystallized Class I ligase core, responsible for phosphodiester bond formation, and the poorly characterized accessory domain that makes polymerization possible. Here we find that the accessory domain is specified by a 37-nt bulged stem-loop structure. The accessory domain is positioned by a tertiary interaction between the terminal AL4 loop of the accessory and the J3/4 triloop found within the ligase core. This docking interaction is associated with an unwinding of the A3 and A4 helixes that appear to facilitate the correct positioning of an essential 8-nt purine bulge found between the two helices. This, together with other constraints inferred from tethering the accessory domain to a range of sites on the ligase core, indicates that the accessory domain is draped over the vertex of the ligase core tripod structure. This geometry suggests how the purine bulge in the polymerase replaces the P2 helix in the Class I ligase with a new structure that may facilitate the stabilization of incoming nucleotide triphosphates.     

A class I ligase ribozyme with reduced Mg2+ dependence: Selection,sequence analysis,and identification of functional tertiary interactions

The class I ligase was among the first ribozymes to have been isolated from random sequences and represents the catalytic core of several RNA-directed RNA polymerase ribozymes. The ligase is also notable for its catalytic efficiency and structural complexity. Here, we report an improved version of this ribozyme, arising from selection that targeted the kinetics of the chemical step. Compared with the parent ribozyme, the improved ligase achieves a modest increase in rate enhancement under the selective conditions and shows a sharp reduction in [Mg²⁺] dependence. Analysis of the sequences and kinetics of successful clones suggests which mutations play the greatest part in these improvements. Moreover, backbone and nucleobase interference maps of the parent and improved ligase ribozymes complement the newly solved crystal structure of the improved ligase to identify the functionally significant interactions underlying the catalytic ability and structural complexity of the ligase ribozyme.     

Rearrangement of substrate secondary structure facilitates binding to the Neurospora VS ribozyme

The Neurospora VS ribozyme differs from other small, naturally occurring ribozymes in that it recognizes for trans cleavage or ligation a substrate that consists largely of a stem-loop structure. We have previously found that cleavage or ligation by the VS ribozyme requires substantial rearrangement of the secondary structure of stem-loop I, which contains the cleavage/ligation site. This rearrangement includes breaking the top base-pair of stem-loop I, allowing formation of a kissing interaction with loop V, and changing the partners of at least three other base-pairs within stem-loop I to adopt a conformation termed shifted. In the work presented, we have designed a binding assay and used mutational analysis to investigate the contribution of each of these structural changes to binding and ligation. We find that the loop I-V kissing interaction is necessary but not sufficient for binding and ligation. Constitutive opening of the top base-pair of stem-loop I has little, if any, effect on either activity. In contrast, the ability to adopt the shifted conformation of stem-loop I is a major determinant of binding: mutants that cannot adopt this conformation bind much more weakly than wild-type and mutants with a constitutively shifted stem-loop I bind much more strongly. These results implicate the adoption of the shifted structure of stem-loop I as an important process at the binding step in the VS ribozyme reaction pathway. Further investigation of features near the cleavage/ligation site revealed that sulphur substitution of the non-bridging phosphate oxygen atoms immediately downstream of the cleavage/ligation site, implicated in a putative metal ion binding site, significantly altered the cleavage/ligation equilibrium but did not perturb substrate binding significantly. This indicates that the substituted oxygen atoms, or an associated metal ion, affect a step that occurs after binding and that they influence the rates of cleavage and ligation differently.     

Calcium(II)-dependent catalytic activity of the Azoarcus ribozyme: testing the limits of resolution for in vitro selection

Group I intron ribozymes isolated from natural sources have a strict dependence on the divalent metal cations Mg(II) or Mn(II) for catalytic activity. However, mutant versions of the Tetrahymena ribozyme have been previously isolated in the laboratory that show demonstrable activity in 10 mM CaCl(2) as the only supplied salt. Here, we sought to discover similar variants of another group I intron that is likely more evolutionarily specialized. We used in vitro selection to isolate a Ca(II)-dependent variant of the naturally-occurring form of the Azoarcus ribozyme, which is half the size of the Tetrahymena ribozyme and possesses an extremely high G+C content of 71%. A mutation of G to A at position 118 was selected in multiple independent trials. Activity of the mutant is very poor in Ca(II) and can only be observed after RT-PCR, highlighting the power of in vitro selection to isolate molecules with rare and low-level activities. The mutation likely confers an alternate but rare folded conformation that permits accommodation of Ca(II) ions and catalysis. This work also serves to caution that although a selection may be successful, isolates may not be catalytically proficient enough to provide useful levels of activity.     

On the structural basis of peptide-bond formation and antibiotic resistance from atomic structures of the large ribosomal subunit

The atomic structures of the large ribosomal subunit from Haloarcula marismortui and its complexes with substrates and antibiotics have provided insights into the way the 3000 nucleotide 23S rRNA folds into a compact, specific structure and interacts with 27 ribosomal proteins as well as the structural basis of the peptidyl transferase reaction and its inhibition by antibiotics. The structure shows that the ribosome is indeed a ribozyme.     

Selection of the 3′-splice site in group I introns

A model for selection of 3′-splice sites in splicing of RNA precursors containing group I introns is presented. The key feature of this model is a newly identified tertiary interaction between the catalytic core of the intron and the 3′-splice site. This tertiary pairing would bring the 3′-splice site into the core of the intron, which is known to contain RNA sequences and structures essential for catalyzing the splicing reactions. The proposed tertiary interaction can coexist with P10, a pairing between 3′-exon sequences and the ‘internal guide sequence’ near the 5′-end of the intron. The model predicts that three RNA-RNA interactions are important in selection of 3′-splice sites: (i) binding of intron sequences with the core; (ii) pairing of exon sequences with the internal guide sequence; and (iii) binding of the terminal guanosine to an unknown site within the core.     

A new model for the tertiary structure of 5S ribonucleic acid in plants

Chemical, enzymatic and physicochemical methods of a structural analysis of 5S rRNAs in lupine, wheat germ, and other plants led us to propose a new three-dimensional model of these molecules The main features of the model are tertiary interactions between the β- and γ-domains of the molecule, specifically nucleotides (34)CCCA(37) in loop C and nucleotides (85)GGGU(88) in loop D. In addition we propose tertiary base-pairing in A100-U53 between loops B and E. We have confirmed this model by NMR spectroscopy and by chemical modification with diethylpyrocarbonate. Our results are consistent with the proposed model and are also applicable to all eukaryotic 5S rRNAs. Our model is clearly differentiated from others by intramolecular tertiary hydrogen bonds between the two domains.     

The solution structure of the VS ribozyme active site loop reveals a dynamic "hot-spot"

The VS ribozyme is the largest ribozyme in its class and is also the least structurally characterized thus far. The current working model of the VS ribozyme locates the active site in stem-loop VI. The solution structure of this active site loop was determined using high resolution NMR spectroscopy. The structure reveals that the ground-state conformation of the active site differs significantly from that determined previously from chemical structure probing and mutational analysis of the ribozyme in its active conformation, which contains several looped out bases. In contrast, the base-pairing scheme found for the isolated loop contains three mismatched base-pairs: an A+-C, a G-U wobble, and a sheared G-A base-pair and no looped out bases. Dynamics observed within the active site loop provide insight into the mechanism by which the RNA can rearrange its secondary structure into an "activated" conformation prior to cleavage. These findings lend support to the idea that RNA secondary structure is more fluid than once believed and that a better understanding of structure and dynamic features of ribozymes is required to unravel the intricacies of their catalytic abilities.     

A computer model of the interleukin-4/receptor complex

Interleukin-4 is a member of the cytokine family, a group of related messenger proteins which collectively help to moderate and control the immune response. It is believed that the folding topology of the β-sheets of the interleukin-4 receptor (IL4R) is the same as that seen in the crystal structure of CD4. Although the sequence identity is low, homology modeling techniques have been used to model the IL4R structure from CD4. Refinement by molecular dynamics leads to a suggested structure which has been docked to interleukin-4 (IL4). Several residues of apparent importance for binding are identified. © 1993 Wiley-Liss, Inc.     

A structural analysis of the group II intron active site and implications for the spliceosome

Group II introns are self-splicing, mobile genetic elements that have fundamentally influenced the organization of terrestrial genomes. These large ribozymes remain important for gene expression in almost all forms of bacteria and eukaryotes and they are believed to share a common ancestry with the eukaryotic spliceosome that is required for processing all nuclear pre-mRNAs. The three-dimensional structure of a group IIC intron was recently determined by X-ray crystallography, making it possible to visualize the active site and the elaborate network of tertiary interactions that stabilize the molecule. Here we describe the molecular features of the active site in detail and evaluate their correspondence with prior biochemical, genetic, and phylogenetic analyses on group II introns. In addition, we evaluate the structural significance of RNA motifs within the intron core, such as the major-groove triple helix and the domain 5 bulge. Having combined what is known about the group II intron core, we then compare it with known structural features of U6 snRNA in the eukaryotic spliceosome. This analysis leads to a set of predictions for the molecular structure of the spliceosomal active site.     

Automated classification of RNA 3D motifs and the RNA 3D Motif Atlas

The analysis of atomic-resolution RNA three-dimensional (3D) structures reveals that many internal and hairpin loops are modular, recurrent, and structured by conserved non-Watson–Crick base pairs. Structurally similar loops define RNA 3D motifs that are conserved in homologous RNA molecules, but can also occur at nonhomologous sites in diverse RNAs, and which often vary in sequence. To further our understanding of RNA motif structure and sequence variability and to provide a useful resource for structure modeling and prediction, we present a new method for automated classification of internal and hairpin loop RNA 3D motifs and a new online database called the RNA 3D Motif Atlas. To classify the motif instances, a representative set of internal and hairpin loops is automatically extracted from a nonredundant list of RNA-containing PDB files. Their structures are compared geometrically, all-against-all, using the FR3D program suite. The loops are clustered into motif groups, taking into account geometric similarity and structural annotations and making allowance for a variable number of bulged bases. The automated procedure that we have implemented identifies all hairpin and internal loop motifs previously described in the literature. All motif instances and motif groups are assigned unique and stable identifiers and are made available in the RNA 3D Motif Atlas (http://rna.bgsu.edu/motifs), which is automatically updated every four weeks. The RNA 3D Motif Atlas provides an interactive user interface for exploring motif diversity and tools for programmatic data access.     

Structural metals in the group I intron: a ribozyme with a multiple metal ion core

Metal ions play key roles in the folding and function for many structured RNAs, including group I introns. We determined the X-ray crystal structure of the Azoarcus bacterial group I intron in complex with its 5' and 3' exons. In addition to 222 nucleotides of RNA, the model includes 18 Mg(2+) and K(+) ions. Five of the metals bind within 12 A of the scissile phosphate and coordinate the majority of the oxygen atoms biochemically implicated in conserved metal-RNA interactions. The metals are buried deep within the structure and form a multiple metal ion core that is critical to group I intron structure and function. Eight metal ions bind in other conserved regions of the intron structure, and the remaining five interact with peripheral structural elements. Each of the 18 metals mediates tertiary interactions, facilitates local bends in the sugar-phosphate backbone or binds in the major groove of helices. The group I intron has a rich history of biochemical efforts aimed to identify RNA-metal ion interactions. The structural data are correlated to the biochemical results to further understand the role of metal ions in group I intron structure and function.     

Nanometer scale pores similar in size to the entrance of the ribosomal exit cavity are a common feature of large RNAs

The highly conserved peptidyl transferase center (PTC) of the ribosome contains an RNA pore that serves as the entrance to the exit tunnel. Analysis of available ribosome crystal structures has revealed the presence of multiple additional well-defined pores of comparable size in the ribosomal (rRNA) RNAs. These typically have dimensions of 1–2 nm, with a total area of ∼100 Ų or more, and most are associated with one or more ribosomal proteins. The PTC example and the other rRNA pores result from the packing of helices. However, in the non-PTC cases the nitrogenous bases do not protrude into the pore, thereby limiting the potential for hydrogen bonding within the pore. Instead, it is the RNA backbone that largely defines the pore likely resulting in a negatively charged environment. In many but not all cases, ribosomal proteins are associated with the pores to a greater or lesser extent. With the exception of the PTC case, the large subunit pores are not found in what are thought to be the evolutionarily oldest regions of the 23S rRNA. The unusual nature of the PTC pore may reflect a history of being created by hybridization between two or more RNAs early in evolution rather than simple folding of a single RNA. An initial survey of nonribosomal RNA crystal structures revealed additional pores, thereby showing that they are likely a general feature of RNA tertiary structure.