Synthesis and characterization of camphorsulfonyl acetate of cellulose

Novel cellulose derivatives were prepared from reacting (1R)-(+)-camphor-10-sulfonic chloride (CSC) with cellulose acetate (CA) in acetone and triethylamine. The reaction conditions, including reaction time and reactant molar ratios, were optimized. The structure of the products was confirmed by means of 1H NMR, 13C NMR, FT-IR and elementary analysis. The techniques were also used to determine the degree of the substitution of camphorsulfonyl groups (DSCS). The data calculated from 1H NMR, 13C NMR, percent grafting (G %) and elementary analysis coincided with those from chemical analysis. Compared to cellulose acetate, the cellulose derivatives exhibited decreased thermal stability, improved solubility in organic solvents and enhanced enantioselectivity towards tyrosine isomers. The solubility and enantioselectivity increased with increasing degrees of camphorsulfonyl substitution.     

Facile preparation of deoxy(thiocyanato)celluloses

Deoxy(thiocyanato)celluloses were prepared by treating chlorodeoxycellulose fabrics with potassium thiocyanate in N,N-dimethylformamide. Under optimal reaction-conditions, more than 80% of the chlorine atoms in the cellulose derivative were replaced by thiocyanate groups. Both the chlorodeoxy- and deoxy(thiocyanato)cellulose fabrics exhibited moderate antibacterial activities.Variables studied were thiocyanate concentration, reaction time and temperature, and degree of substitution of the chlorodeoxycellulose in the fabrics being treated. The effect that each of these variables had on the replacement of chlorine atoms by thiocyanate groups was investigated. The tensile, wrinkle-recovery, and biocidal properties of the chlorodeoxy- and deoxy(thiocyanato)cellulose fabrics were also compared.     

Synthesis and characterization of a trifunctional aminoamide cellulose derivative

As part of an effort to synthesize a dendronized cellulose, we have synthesized a trifunctional aminoamide derivative, which is the first generation of a dendron substituent. We anticipate that a dendronized cellulose would have applications in complexing metals and could be employed as an adjuvant for drugs. The trifunctional aminoamide substituent was introduced by coupling di-tert-butyl 4-[2-(tert-butoxycarbonyl)ethyl]-4-aminoheptanedicarboxylate, BA, directly to a (carboxymethyl)cellulose (CMC) backbone and converting the tert-butyl ester peripheral groups to aminoamide substituents by use of N,N-dimethyl-1,3-propanediamine. Confirmation of the proposed chemical structure of the intermediates as well as the water-soluble aminoamide derivative (CMCBADMPDA) was obtained by Fourier transform infrared (FT-IR) and NMR spectroscopy. The degree of substitution (DS) was determined to be 0.40 +/- 0.01 by thermogravimetric analysis. Typical weight average molecular weight (M(w)), molecular weight distribution (MWD), and molecular size of the dendronized polymers were found to be 97,000, 1.7, and 17.4 nm for derivatives of a CMC with corresponding M(w), MWD, and root-mean-square radius (RMS) of 230 000, 3.2, and 24 nm. A differential refractive index (dn/dc) for the aminoamide derivative measured in aqueous 0.40 N ammonium acetate-0.01 N NaOH was found to be 0.1473. The intrinsic viscosity of the dendronized cellulose decreased significantly when compared with that of CMC, that is, 0.40 dL/g relative to 5.60 dL/g. The hydrophobicity of the CMCBADMPDA microenvironment in aqueous solution was probed by evaluating the relative fluorescence intensities of the I(373)/I(384) pyrene bands; a slightly more hydrophobic environment was observed.     

Synthesis and properties of anionic cellulose ethers: influence of functional groups and molecular weight on flowability of concrete

The suitability of anionic cellulose ethers as superplasticizers and the effect of chemical structure on the fluidity of cement mixtures was investigated. To elucidate the influence of molecular weight and degree of cellulose backbone substitution, cellulose and hydroxyethyl cellulose with molecular weights <50,000 g/mol were synthesized by acid-catalyzed and oxidative degradation. Commercial as well as degraded samples were functionalized by carboxymethylation and sulfobutylation, controlling the degree of substitution (DS) by the molar ratio of reactants and by taking advantage of the high reactivity of sultones towards salts of carboxylic acids, even in aqueous solutions. The fluidizing effect of the cellulose ethers with anionic ‘cement-anchoring‘ groups was prescreened, measuring the static flow of cement pastes. The results indicated a high potential of sulfobutylated cellulose mixed ethers as dispersing agents for concrete. The fluidizing action increased with increasing DS and an optimum range of molecular weight between 100,000 and 150,000 g/mol was found.     

SH-containing cellulose acetate derivatives: preparation and characterization as a shape memory-recovery material

Cellulose derivatives having a cross-linkable mercapto group were prepared by esterification of cellulose acetate (CA) with mercaptoacetic acid. The molecular structure of a series of products (CA-MA) was characterized by (1)H and (1)H- (13)C HMQC NMR spectroscopy and gel permeation chromatography. The solubility of CA-MA in water and organic solvents could be controlled by changing the preparation conditions including the degree of acetyl substitution of the starting CA. The CA-MA samples thus synthesized showed a sol-gel transition in solution and a shape memory-recovery behavior in film form through adequate redox treatments due to the reversible, cross-linking association and dissociation between mercapto groups. Dimethyl sulfoxide was usable as the organic solvent and oxidant, while the major reducing reagent was 2-mercaptoethanol or ammonium mercaptoacetic acid. The progress of the redox reactions was followed by using a confocal depth scanning technique in Raman spectroscopy. It was found that the compatibility between the cellulose derivatives and the redox reagents used was an important factor for the successful reactions, especially in the samples of film form. The cross-linking effect on the thermal and viscoelastic properties of the CA-MA films was also estimated by differential scanning calorimetry and dynamic mechanical analysis. Discussion focused on the alternately declining and recovering behavior of a principal loss tan delta peak, observed following the redox treatments repeated for the CA-MA film specimens.     

区域选择性改性的纤维素和壳聚糖衍生物及其血液相容性

通过对纤维素和壳聚糖的区域选择性改性,将内皮细胞表面硫酸乙酰肝素（ES—HS）分子结构中对其血液相容性有重要影响的官能团引入纤维素和壳聚糖的分子结构中,并将其通过离子键固定在部分阳离子化的纤维素膜上,以期模拟ES—HS的血液相容性。血小板吸附结果表明,6位改性的纤维素衍生物的吸附程度较高。在五种壳聚糖衍生物中,2位的NS03／NAc为6／4的衍生物表现出最低的血小板吸附。当保持壳聚糖2位的NS03／NAc值不变时,对6位进行完全磺酸酯化,也可有效减少血小板的吸附。     

Synthesis and antimicrobial activity of a water-soluble chitosan derivative with a fiber-reactive group

A novel fiber-reactive chitosan derivative was synthesized in two steps from a chitosan of low molecular weight and low degree of acetylation. First, a water-soluble chitosan derivative, N-[(2-hydroxy-3-trimethylammonium)propyl]chitosan chloride (HTCC), was prepared by introducing quaternary ammonium salt groups on the amino groups of chitosan. This derivative was further modified by introducing functional (acrylamidomethyl) groups, which can form covalent bonds with cellulose under alkaline conditions, on the primary alcohol groups (C-6) of the chitosan backbone. The fiber-reactive chitosan derivative, O-acrylamidomethyl-HTCC (NMA-HTCC), showed complete bacterial reduction within 20 min at the concentration of 10ppm, when contacted with Staphylococcus aureus and Escherichia coli (1.5-2.5 x 10(5) colony forming units per milliliter [CFU/mL]).     

Synthesis and properties of polyaniline–cellulose acetate blends: The use of sugarcane bagasse waste and the effect of the substitution degree

Membranes of blends of polyaniline (PANi) and cellulose acetate (CA) produced from sugarcane bagasse with different degrees of substitution were produced and characterized using various techniques. Results showed that incorporation of PANi into the CA matrices leads to significant alterations of the blend morphologies, with phase separation, and that these differences are less significant for PANi/cellulose triacetate blends. The blends also showed a significant increase in electrical conductivity, with that of PANi/cellulose diacetate demonstrating an almost 200-fold increase.     

Preparation of cellouronic acids and partially acetylated cellouronic acids by TEMPO/NaClO oxidation of water-soluble cellulose acetate

Water-soluble cellulose acetates with a degree of substitution (DS) of 0.5, prepared by partial deacetylation of cellulose acetate of DS=2.5, were oxidized with catalytic amount of 2,2,6,6,-tetramethyl-1-piperidinyloxy radical (TEMPO), sodium hypochlorite, and sodium bromide to provide useful cellouronic acids. The oxidation was conducted at a constant pH of 10 and at 2 degrees C to avoid the occurrence of side products. Whereas only the primary hydroxyl groups of cellulose acetate were oxidized, a variable degree of oxidation (DO) resulted in a range of 0.33 to 1.0, depending on the concentration in sodium hypochlorite. Thus, polyglucuronic acid as well as partially acetylated cellouronic acid, having a range of DO were obtained.     

Fluoro-modified chemotactic peptides: fMLF analogues.

A small library of peptide analogues of the chemotactic tripeptide For-Met-Leu-Phe-NH2 modified by substitution of Leu at position 2 by three different fluorinated amino acids varying in content of fluorine, length of the fluorinated side chain, and alkylation degree at the alpha-carbon atom was synthesized. The influence of the fluorine substitution on the biological activity was investigated by measuring the oxidative activity of neutrophils using a luminol-dependent chemiluminescence assay.     

A chemical approach to the quantitative determination of carboxymethyl cellulose in industrial samples

The quantitation of carboxymethyl cellulose (CMC) by chemical analysis, with either manual or automated -cysteine-sulphuric acid assays, was shown to be affected by the degree of substitution (DS) of the CMC; a decrease in response to the -cysteine-sulphuric acid assay with increasing DS was observed. However, the use of a mathematical model, which corrected the CMC weight to cellulose content, combined with a prehydrolysis step for removing the carboxymethyl groups prior to either manual or post-chromatographic Biogel® P6 column automated -cysteine-sulphuric acid assays eliminated the interference of the DS in the -cysteine assay.     

Characterization of cellulose acetate-reinforced aliphatic-aromatic copolyester composites

The biodegradability, morphology, mechanical, and thermal properties of composite materials composed of maleic anhydride-grafted poly(butylene adipate-co-terephthalate) (PBAT) and cellulose acetate (CA) were evaluated. Composites containing maleic anhydride-grafted PBAT (PBAT-g-MA/CA) exhibited noticeably superior mechanical properties due to greater compatibility between the two components. The dispersion of CA in the PBAT-g-MA matrix was highly homogeneous as a result of ester formation, and the consequent creation of branched and cross-linked macromolecules between the anhydride carboxyl groups of PBAT-g-MA and hydroxyl groups in CA. Each composite was buried in soil and monitored to assess biodegradability. Both the PBAT and the PBAT-g-MA/CA composite films were eventually completely degraded, and severe disruption of film structure was observed after 60-100 days of incubation. Although the degree of weight loss after burial indicated that both materials were biodegradable, even with high levels of CA, the higher water resistance of PBAT-g-MA/CA films indicated that they were more biodegradable than those made of PBAT.     

Homogeneous phase synthesis of cellulose carbamate silica hybrid materials using 1-n-butyl-3-methylimidazolium chloride ionic liquid medium

Cellulose carbamate silica hybrid materials can be prepared in 78–84% yield using the homogeneous phase reaction of 3-(triethoxysilyl)propyl isocyanate with cellulose dissolved in 1-n-butyl-3-methylimidazolium chloride ionic liquid and then using NH₄OH catalyzed hydrolysis of triethoxysilyl groups and the sol–gel process. New cellulose carbamate silica hybrid materials produced were characterized by elemental analysis, FT-IR, and TG-DTA. The hydrophilic affinity of these materials is shown to decrease with the degree of substitution of the cellulose hydroxyl groups with carbamate groups.     

Exclusive and complete introduction of amino groups and their N-sulfo and N-carboxymethyl groups into the 6-position of cellulose without the use of protecting groups

A new regioselective synthesis of 6-amino-6-deoxycellulose with a DS 1.0 (degree of substitution) at C-6, and its 6-N-sulfonated and its 6-N-carboxymethylated derivatives, without using protecting groups is described in this paper. The reaction conditions were optimized for preparing cellulose tosylate with full tosylation at C-6 and partial tosylation at C-2 and C-3. The nucleophilic substitution (S(N)) reaction of the tosyl group by NaN(3) at low temperature of 50 degrees C in Me(2)SO was achieved completely at C-6, whereas the tosyl groups at C-2 and C-3 were not displaced. In contrast to this, at 100 degrees C the tosyl groups at C-6, and also those at C-2 and C-3, were replaced by azido groups. This regioselective reaction that depends on temperature makes it possible to reach a selective and quantitative S(N) reaction at C-6 at low temperatures. In the subsequent reduction step with LiAlH(4), the azido group at C-6 was reduced to the amino group, and the tosyl groups at C-2 and C-3 were simultaneously completely removed. Also reported is a temperature-dependent, regioselective and complete iodination by nucleophilic substitution of the tosyl group at C-6 at 60 degrees C. At higher temperatures from 75 to 130 degrees C, substitution is also observed to occur at C-2. The selective iodination at 60 degrees C was employed to confirm the complete tosylation at C-6 of cellulose. The reaction products were identified by four different independent quantitative methods, namely 13C NMR, elemental analysis, ESCA, and fluorescence spectroscopy. 6-N-Sulfonated and 6-N-carboxymethylated cellulose derivatives were also synthesized. The new derivatives are potent candidates for structure-function studies, e.g., studies in relation to regioselectively 2-N-sulfonated and 2-N-carboxymethylated chitosan derivatives.     

Chiral discrimination with regioselectively substituted cellulose esters as chiral stationary phases

Four kinds of cellulose derivatives, including two regioselectively substituted cellulose esters (6-O-acetyl-2,3-di-O-benzoyl cellulose and 2,3-di-O-acetyl-6-O-benzoyl cellulose), were synthesized so that the effects of their functional group distribution on their chiral discrimination ability could be examined. The degree of substitution by functional groups appeared to have a critical effect on the separation in most cases, but the type of the functional group at the C-6 position also significantly influenced chiral discrimination when a series of neutral arylalcohol derivatives were used as racemates. Copyright 2000 Wiley-Liss, Inc.     

Effect of chemical modification of cellulose on the activity of a cellulase from Aspergillus niger

Five chemically modified forms of cellulose were prepared, characterized, and tested as substrates for a homogeneous glucanohydrolase from A. niger. The relative order of reactivity at pH 4.0 was DEAE = PEI > benzyl DEAE > cellulose > P > CM.The following abbreviations are used throughout the article: (RBB) Remazol brilliant blue R; (DEAE) diethylamino ethyl; (PEI) polethyleneimine; (CM) carboxymenthyl; (P) phospho; (DS) degree of RBB dye substitution of cellulose, in mol dye/100 glucose. This indicates that positively charged cellulose substrates are more susceptible to hydrolysis by the cellulase. This observation strengthens an earlier proposal that caroxyl groups on the enzyme are involved in substrate binding and catalytic action. Chemical modification is suggested as a method to increase the rate of enzymatic hydrolysis of cellulose, a process now in the commercial development stage.     

Cellulose acetates from linters and sisal: correlation between synthesis conditions in DMAc/LiCl and product properties

We report the acetylation of celluloses from sisal (untreated and alkali treated) and cotton linters (alkali treated), under homogeneous solution conditions, using DMAc/LiCl as solvent system. Our target was to evaluate the effects of cellulose dissolution and reactions conditions on the product properties. The products were characterized in terms of degree of substitution (DS) by 1H NMR, and molar weight distribution (MWD) by size exclusion chromatography. Changes in the DS of the products were correlated with reaction conditions and solution properties. It was found that the dissolution of celluloses and degree of substitution of cellulose derivatives depends on a fine adjustment of the dissolution/derivatization conditions, as well as on the origin (sisal or linters) of celluloses.     

3-Arylpiperidines as potentiators of existing antibacterial agents.

Important resistance patterns in Gram-negative pathogens include active efflux of antibiotics out of the cell via a cellular pump and decreased membrane permeability. A 3-arylpiperidine derivative (1) has been identified by high-throughput assay as a potentiator with an IC(50) approximately 90 microM. This report details the evaluation of the tether length, aryl substitution and the importance of the fluorine on antibiotic accumulation. Evaluation of various tether lengths demonstrated that the two-carbon tethered analogues are optimal. Removal of the fluorine has a modest effect on antibiotic accumulation and the defluorinated analogue 17 is equally potent to the original lead 1.     

FTIR-spectroscopic studies of the fine structure of nitrocellulose treated by Desulfovibrio desulfuricans

Most studies have concluded that nitrocellulose (NC) with high degree of nitrogen content is resistant to biodegradation. Our results demonstrated that NC (>11%N) does undergo biotransformation in the presence of sulfate-reducing bacteria Desulfovibrio desulfuricans 1388. FTIR analyses indicated that the substitution of nitro groups for OH(-) groups took place. The spectrum of precipitate obtained after acetone extraction of NC resembled mainly the spectrum of native cellulose. Thus the synthetic unbiodegradable polymer was transformed to the natural compound accessible for microorganisms.     

Characterization of doubly substituted polysaccharide derivatives

Derivatives of cellulose, amylose and chitosan, bearing simultaneously 10-undecenoyl and arylaminocarbonyl or benzoyl groups were characterized by the combined use of 1H NMR and elemental analysis. The mathematical manipulation of elemental analysis data permits the calculation of the degree of substitution for each kind of substituent. The method was validated and is applicable to other derivatives.