A thermosensitive hydrogel capable of releasing bFGF for enhanced differentiation of mesenchymal stem cell into cardiomyocyte-like cells under ischemic conditions

A thermosensitive hydrogel capable of differentiating mesenchymal stem cells (MSCs) into cardiomyocyte-like cells was synthesized. The hydrogel was based on N-isopropylacrylamide (NIPAAm), N-acryloxysuccinimide, acrylic acid, and hydroxyethyl methacrylate-poly(trimethylene carbonate). The hydrogel was highly flexible at body temperature with breaking strain >1000% and Young's modulus 45 kPa. When MSCs were encapsulated in the hydrogel and cultured under normal culture conditions (10% FBS and 21% O(2)), the cells differentiated into cardiomyocyte-like cells. However, the differentiation was retarded, and even diminished, under low nutrient and low oxygen conditions, which are typical of the infarcted heart. We hypothesized that enhancing MSC survival under low nutrient and low oxygen conditions would restore the differentiation. To enhance cell survival, a pro-survival growth factor (bFGF) was loaded in the hydrogel. bFGF was able to sustainedly release from the hydrogel for 21 days. Under the low nutrient and low oxygen conditions (1% O(2) and 1% FBS), bFGF enhanced MSC survival and differentiation in the hydrogel. After 14 days of culture, survival of 70.5% of MSCs remained in the bFGF-loaded hydrogel, while only 4.9% of MSCs remained in the hydrogel without bFGF. The differentiation toward cardiomyocyte-like cells was completely inhibited at 1% FBS and 1% oxygen. Loading bFGF in the hydrogel restored the differentiation, as confirmed by the expression of cardiac markers at both the gene (MEF2C and CACNA1c) and protein (cTnI and connexin 43) levels. bFGF loading also up-regulated the paracrine effect of MSCs. VEGF expression was significantly increased in the bFGF-loaded hydrogel. These results demonstrate that the developed bFGF-loaded hydrogel may potentially be used to deliver MSCs into hearts for regeneration of heart tissue.     

Combined effects of chemical priming and mechanical stimulation on mesenchymal stem cell differentiation on nanofiber scaffolds

Functional tissue engineering of connective tissues such as the anterior cruciate ligament (ACL) remains a significant clinical challenge, largely due to the need for mechanically competent scaffold systems for grafting, as well as a reliable cell source for tissue formation. We have designed an aligned, polylactide-co-glycolide (PLGA) nanofiber-based scaffold with physiologically relevant mechanical properties for ligament regeneration. The objective of this study is to identify optimal tissue engineering strategies for fibroblastic induction of human mesenchymal stem cells (hMSC), testing the hypothesis that basic fibroblast growth factor (bFGF) priming coupled with tensile loading will enhance hMSC-mediated ligament regeneration. It was observed that compared to the unloaded, as well as growth factor-primed but unloaded controls, bFGF stimulation followed by physiologically relevant tensile loading enhanced hMSC proliferation, collagen production and subsequent differentiation into ligament fibroblast-like cells, upregulating the expression of types I and III collagen, as well as tenasin-C and tenomodulin. The results of this study suggest that bFGF priming increases cell proliferation, while mechanical stimulation of the hMSCs on the aligned nanofiber scaffold promotes fibroblastic induction of these cells. In addition to demonstrating the potential of nanofiber scaffolds for hMSC-mediated functional ligament tissue engineering, this study yields new insights into the interactive effects of chemical and mechanical stimuli on stem cell differentiation.     

Incorporated-bFGF polycaprolactone/polyvinylidene fluoride nanocomposite scaffold promotes human induced pluripotent stem cells osteogenic differentiation

Bioactive scaffolds that can increase transplanted cell survival time at the defect site have a great promising potential to use clinically since tissue regeneration or secretions crucially depend on the transplanted cell survival. In this study embedded basic fibroblast growth factor (bFGF)-polycaprolactone-polyvinylidene fluoride (PCL-PVDF) hybrid was designed and fabricated by electrospinning as a bio-functional nanofibrous scaffold for bone tissue engineering. After morphological characterization of the PCL-PVDF (bFGF) scaffold, nanofibers biocompatibility was investigated by culturing of the human induced pluripotent stem cells (iPSCs). Then, the bone differentiation capacity of the iPSCs was evaluated when grown on the PCL-PVDF and PCL-PVDF (bFGF) scaffolds in comparison with culture plate as a control using evaluating of the common osteogenic markers. The viability assay displayed a significant increase in iPSCs survival rate when grown on the bFGF content scaffold. The highest alkaline phosphatase activity and mineralization were detected in the iPSCs while grown on the PCL-PVDF (bFGF) scaffolds. Obtained results from gene and protein expression were also demonstrated the higher osteoinductive property of the bFGF content scaffold compared with the scaffold without it. According to the results, the release of bFGF from PCL-PVDF nanofibers increased survival and proliferation rate of the iPSCs, which followed by an increase in its osteogenic differentiation potential. Taking together, PCL-PVDF (bFGF) nanofibrous scaffold demonstrated that can be noted as a promising candidate for treating the bone lesions by tissue engineering products.     

The effects of nanofiber topography on astrocyte behavior and gene silencing efficiency

Astrocyte-nanofiber interactions are studied by culturing primary rat cortical astrocytes on poly[caprolactone-co-(ethyl ethylene phosphate)] electrospun nanofibers and solvent-cast films (two-dimensional control). The results indicate that nanofiber topography significantly suppresses astrocyte proliferation and enhances apoptosis, without altering cellular activation as compared to films. Moreover, nanofiber topography enhances gene-silencing efficiency in astrocytes. The results suggest that nanofibers may serve as potential substrates for nerve regeneration by suppressing astrocyte growth and may further facilitate the use of gene-silencing to enhance CNS regeneration.     

Unique natural-protein hollow-nanofiber membranes produced by weaver ants for medical applications

We report the properties of unique natural-protein hollow-nanofiber membranes produced by weaver ants (Oecophylla smaragdina) and the potential of using the nanofiber membranes for medical applications. Although natural proteins such as silk and collagen have been used to produce electrospun nanofibers for medical applications, there are no reports on producing hollow nanofibers from proteins. Hollow nanofibers are expected to have unique properties such as high drug loading. Weaver ant larvae extrude proteins in the form of nanofibers that are hollow and the adult ants build the nests using the hollow nanofibers. It was found that the nanofiber membranes are composed of fibers with average diameters of 450 nm. The membranes have tensile strength of about 4 MPa, high elongation of about 31% and modulus of 31 MPa, better than any protein nanofiber membrane reported so far. The membranes withstand rigorous boiling in weak alkali, show good attachment and proliferation of osteoblasts and can load up to 4.7 times higher drugs compared to common silk. These features make ant nanofiber membranes unique and preferable for medical and biotechnology industries.     

Preparation of electrospun polycaprolactone nanofiber mats loaded with microalgal extracts

Sustainable, ecological, and biocompatible materials are emerging for the development of novel components for tissue engineering. Microalgae being one of the unique organisms on Earth to provide various novel compounds with certain bioactivities are also a good source for the development of novel tissue scaffold materials. In this study, electrospinning technique was utilized to fabricate nanofibers from polycaprolactone loaded with microalgal extracts obtained from Haematococcus pluvialis (vegetative and carotenoid producing form) and Chlorella vulgaris. The FTIR results showed that, blending microalgae with polycaprolactone give unique bands rooted from microalgae and polycaprolactone structure. The samples were not diversified from each other, however stable bands were observed. SEM analysis revealed a uniform fiber fabrication with an average diameter of 810 ± 55 nm independent from microalgal extracts. MTT assay was done on HUVEC cell lines and results showed that nanofiber mats helped cell proliferation with extended time. Biodegradation resulted with mineral accumulation on the surface of same samples however the fiber degradation was uniform. With slow but stable biodegradation characteristics, microalgal extract loaded nanofiber mats holds great potential to be novel tissue scaffold material.     

High yield of cells committed to the photoreceptor-like cells from conjunctiva mesenchymal stem cells on nanofibrous scaffolds

Transplantation of stem cells using biodegradable and biocompatible nanofibrous scaffolds is a promising therapeutic approach for treating inherited retinal degenerative diseases such as retinitis pigmentosa and age-related macular degeneration. In this study, conjunctiva mesenchymal stem cells (CJMSCs) were seeded onto poly-l-lactic acid (PLLA) nanofibrous scaffolds and were induced to differentiate toward photoreceptor cell lineages. Furthermore, the effects of orientation of scaffold on photoreceptor differentiation were examined. Scanning electron microscopy (SEM) imaging, quantitative real time RT-PCR (qPCR) and immunocytochemistry were used to analyze differentiated cells and their expression of photoreceptor-specific genes. Our observations demonstrated the differentiation of CJMSCs to photoreceptor cells on nanofibrous scaffolds and suggested their potential application in retinal regeneration. SEM imaging showed that CJMSCs were spindle shaped and well oriented on the aligned nanofiber scaffolds. The expression of rod photoreceptor-specific genes was significantly higher in CJMSCs differentiated on randomly-oriented nanofibers compared to those on aligned nanofibers. According to our results we may conclude that the nanofibrous PLLA scaffold reported herein could be used as a potential cell carrier for retinal tissue engineering and a combination of electrospun nanofiber scaffolds and MSC-derived conjunctiva stromal cells may have potential application in retinal regenerative therapy.     

Electrospun synthetic and natural nanofibers for regenerative medicine and stem cells

Nanofibers are attractive substrates for tissue regeneration applications because they structurally mimic the native extracellular matrix. Electrospinning has been recognized as one of the most efficient techniques to fabricate polymer nanofibers. Recent research has demonstrated that cellular responses, for example attachment, proliferation and differentiation, can be modulated by tuning nanofiber properties. In combination with other processing techniques, such as particulate leaching or three-dimensional printing, nanofibrous scaffolds incorporating macroporous networks could be developed to enhance infiltration of cells. Three dimensional nanofiber-based constructs offer an opportunity to achieve advanced functional tissue regeneration. This review explores the advantageous effects of nanofibers on cell behaviors compared to traditional scaffolds.     

Basic fibroblast growth factor promotes bone marrow stromal cell transplantation-mediated neural regeneration in traumatic brain injury

The current study was designed to evaluate the effects of basic fibroblast growth factor (bFGF) on human BMSC (hBMSC) transplantation-mediated neural regeneration in traumatic brain injury (TBI). Fibrin gel was used as a delivery vehicle to release bFGF locally in the TBI sites in a controlled manner. To test this hypothesis, hBMSCs suspended in fibrin gel containing bFGF were transplanted to rat TBI sites. Transplantation of hBMSCs suspended in fibrin gel without bFGF served as a control. hBMSC transplantation and bFGF treatment showed enhanced neural tissue regeneration than that of the control. The infarction volume and apoptotic activity of the transplanted hBMSCs were significantly decreased, and functional outcomes were significantly improved in the hBMSC transplantation and bFGF treatment group than in the control group. This study demonstrates that bFGF significantly enhances histological and functional recovery when used in hBMSC transplantation therapy in TBI.     

Coaxial electrospinning of (fluorescein isothiocyanate-conjugated bovine serum albumin)-encapsulated poly(epsilon-caprolactone) nanofibers for sustained release

As an aim toward developing biologically mimetic and functional nanofiber-based tissue engineering scaffolds, we demonstrated the encapsulation of a model protein, fluorescein isothiocyanate-conjugated bovine serum albumin (fitcBSA), along with a water-soluble polymer, poly(ethylene glycol) (PEG), within the biodegradable poly(epsilon-caprolactone) (PCL) nanofibers using a coaxial electrospinning technique. By variation of the inner flow rates from 0.2 to 0.6 mL/h with a constant outer flow rate of 1.8 mL/h, fitcBSA loadings of 0.85-2.17 mg/g of nanofibrous membranes were prepared. Variation of flow rates also resulted in increases of fiber sizes from ca. 270 nm to 380 nm. The encapsulation of fitcBSA/PEG within PCL was subsequently characterized by laser confocal scanning microscopy, transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS) analysis. In vitro release studies were conducted to evaluate sustained release potential of the core-sheath-structured composite nanofiber PCL-r-fitcBSA/PEG. As a negative control, composite nanofiber PCL/fitcBSA/PEG blend was prepared from a normal electrospinning method. It was found that core-sheath nanofibers PCL-r-fitcBSA/PEG pronouncedly alleviated the initial burst release for higher protein loading and gave better sustainability compared to that of PCL/fitcBSA/PEG nanofibers. The present study would provide a basis for further design and optimization of processing conditions to control the nanostructure of core-sheath composite nanofibers and ultimately achieve desired release kinetics of bioactive proteins (e.g., growth factors) for practical tissue engineering applications.     

Characterization of the surface biocompatibility of the electrospun PCL-collagen nanofibers using fibroblasts

The effect of nanofiber surface coatings on the cell's proliferation behavior was studied. Individually collagen-coated poly(epsilon-caprolactone) (PCL) nanofibers (i.e., Collagen-r-PCL in the form of a core-shell structure) were prepared by a coaxial electrospinning technique. A roughly collagen-coated PCL nanofibrous matrix was also prepared by soaking the PCL matrix in a 10 mg/mL collagen solution overnight. These two types of coated nanofibers were then used to investigate differences in biological responses in terms of proliferation and cell morphology of human dermal fibroblasts (HDF). It was found that coatings of collagen on PCL nanofibrous matrix definitely favored cells proliferation, and the efficiency is coating means dependent. As compared to PCL, the HDF density on the Collagen-r-PCL nanofiber membrane almost increased linearly by 19.5% (2 days), 22.9% (4 days), and 31.8% (6 days). In contrast, the roughly collagen-coated PCL increased only by 5.5% (2 days), 11.0% (4 days), and 21.0% (6 days). SEM observation indicated that the Collagen-r-PCL nanofibers encouraged cell migration inside the scaffolds. These findings suggest that the Collagen-r-PCL nanofibers can be used as novel functional biomimetic nanofibers toward achieving excellent integration between cells and scaffolds for tissue engineering applications.     

In vitro bone growth responds to local mechanical strain in three-dimensional polymer scaffolds

Mechanical stimulation plays a key role in healing and remodelling of bone tissue in vivo, and is used in bone tissue regeneration strategies in vitro. Although macroscopic compression of three-dimensional (3-D) seeded constructs can increase bone formation, it is not yet reported how this response is related to differences in local mechanical strains inside the scaffolds. In this study, we experimentally test the hypothesis that differences in local average of heterogeneous strains in a polymer scaffold will correlate with induced differences in the local biological response.Twenty-four poly(l-lactic acid) porous scaffolds seeded with rat bone cells were cultured first for 2 and 3 weeks under static conditions, respectively. Then for 1 week, half of the scaffolds were cyclically compressed (1.5%, 1 Hz), 1 h daily, with continuous perfusion (0.1 ml/min). The remaining half was kept under static conditions. The pore-surface strains in the scaffolds at the start of culture were calculated with micro-finite element modelling based on micro-Computed Tomography (μCT) images. The locations of mineralized nodules were determined from μCT images and coupled to the calculated strains.Detectable mineralized nodules (>10³ μm³) were only present in the loaded samples. Averages of absolute principal strains at the start of culture were significantly higher at nodule sites than at sites without a nodule.The results support the hypothesis that regenerating bone tissue in a 3-D porous scaffold responds to local mechanical strain. The methodology presented in this study can contribute design optimisation of tissue regeneration strategies relying on mechanical stimulation.     

Nanofiber adsorbents for high productivity downstream processing

Electrospun polymeric nanofiber adsorbents offer an alternative ligand support surface for bioseparations. Their non‐woven fiber structure with diameters in the sub‐micron range creates a remarkably high surface area. To improve the purification productivity of biological molecules by chromatography, cellulose nanofiber adsorbents were fabricated and assembled into a cartridge and filter holder format with a volume of 0.15 mL, a bed height of 0.3 mm and diameter of 25 mm. The present study investigated the performance of diethylaminoethyl (DEAE) derivatized regenerated cellulose nanofiber adsorbents based on criteria including mass transfer and flow properties, binding capacity, and fouling effects. Our results show that nanofibers offer higher flow and mass transfer properties. The non‐optimized DEAE‐nanofiber adsorbents indicate a binding capacity of 10% that of packed bed systems with BSA as a single component system. However, they operate reproducibly at flowrates of a hundred times that of packed beds, resulting in a potential productivity increase of 10‐fold. Lifetime studies showed that this novel adsorbent material operated reproducibly with complex feed material (centrifuged and 0.45 µm filtered yeast homogenate) and harsh cleaning‐in‐place conditions over multiple cycles. DEAE nanofibers showed superior operating performance in permeability and fouling over conventional adsorbents indicating their potential for bioseparation applications. Biotechnol. Bioeng. 2013; 110: 1119–1128. © 2012 Wiley Periodicals, Inc.     

Heparin mimetic peptide nanofibers promote angiogenesis

New blood vessel formation (angiogenesis) is one of the most important processes required for functional tissue formation. Induction of angiogenesis is usually triggered by growth factors released by cells. Glycosaminoglycans (e.g., heparan sulphates) in the extracellular matrix aid in proper functioning of these growth factors. Therefore, exogeneous heparin or growth factors were required for promoting angiogenesis in previous regenerative medicine studies. Here we report for the first time induction of angiogenesis by a synthetic nanofibrous peptide scaffold without the addition of any exogenous growth factors or heparin. We designed and synthesized a self-assembling peptide amphiphile molecule that is functionalized with biologically active groups to mimic heparin. Like heparin, this molecule has the ability to interact with growth factors and effectively enhance their bioactivity. The nanofibers formed by these molecules were shown to form a 3D network mimicking the structural proteins in the extracellular matrix. Because of heparin mimicking capabilities of the peptide nanofibers, angiogenesis was induced without the addition of exogenous growth factors in vitro. Bioactive interactions between the nanofibers and the growth factors enabled robust vascularization in vivo as well. Heparin mimetic peptide nanofibers presented here provide new opportunities for angiogenesis and tissue regeneration by avoiding the use of heparin and exogenous growth factors. The synthetic peptide nanofiber scaffolds enriched with proper chemical functional groups shown in this study can be used to induce various desired physiological responses for tissue regeneration.     

Potential of Magnetic Nanofiber Scaffolds with Mechanical and Biological Properties Applicable for Bone Regeneration

Magnetic nanofibrous scaffolds of poly(caprolactone) (PCL) incorporating magnetic nanoparticles (MNP) were produced, and their effects on physico-chemical, mechanical and biological properties were extensively addressed to find efficacy for bone regeneration purpose. MNPs 12 nm in diameter were citrated and evenly distributed in PCL solutions up to 20% and then were electrospun into nonwoven nanofibrous webs. Incorporation of MNPs greatly improved the hydrophilicity of the nanofibers. Tensile mechanical properties of the nanofibers (tensile strength, yield strength, elastic modulus and elongation) were significantly enhanced with the addition of MNPs up to 15%. In particular, the tensile strength increase was as high as ∼25 MPa at 15% MNPs vs. ∼10 MPa in pure PCL. PCL-MNP nanofibers exhibited magnetic behaviors, with a high saturation point and hysteresis loop area, which increased gradually with MNP content. The incorporation of MNPs substantially increased the degradation of the nanofibers, with a weight loss of ∼20% in pure PCL, ∼45% in 10% MNPs and ∼60% in 20% MNPs. Apatite forming ability of the nanofibers tested in vitro in simulated body fluid confirmed the substantial improvement gained by the addition of MNPs. Osteoblastic cells favored the MNPs-incorporated nanofibers with significantly improved initial cell adhesion and subsequent penetration through the nanofibers, compared to pure PCL. Alkaline phosphatase activity and expression of genes associated with bone (collagen I, osteopontin and bone sialoprotein) were significantly up-regulated in cells cultured on PCL-MNP nanofibers than those on pure PCL. PCL-MNP nanofibers subcutaneously implanted in rats exhibited minimal adverse tissue reactions, while inducing substantial neoblood vessel formation, which however, greatly limited in pure PCL. In vivo study in radial segmental defects also signified the bone regeneration ability of the PCL-MNP nanofibrous scaffolds. The magnetic, bone-bioactive, mechanical, cellular and tissue attributes of MNP-incorporated PCL nanofibers make them promising candidate scaffolds for bone regeneration.     

Modification of hydrophilic and hydrophobic surfaces using an ionic-complementary peptide

Ionic-complementary peptides are novel nano-biomaterials with a variety of biomedical applications including potential biosurface engineering. This study presents evidence that a model ionic-complementary peptide EAK16-II is capable of assembling/coating on hydrophilic mica as well as hydrophobic highly ordered pyrolytic graphite (HOPG) surfaces with different nano-patterns. EAK16-II forms randomly oriented nanofibers or nanofiber networks on mica, while ordered nanofibers parallel or oriented 60 degrees or 120 degrees to each other on HOPG, reflecting the crystallographic symmetry of graphite (0001). The density of coated nanofibers on both surfaces can be controlled by adjusting the peptide concentration and the contact time of the peptide solution with the surface. The coated EAK16-II nanofibers alter the wettability of the two surfaces differently: the water contact angle of bare mica surface is measured to be <10 degrees , while it increases to 20.3+/-2.9 degrees upon 2 h modification of the surface using a 29 microM EAK16-II solution. In contrast, the water contact angle decreases significantly from 71.2+/-11.1 degrees to 39.4+/-4.3 degrees after the HOPG surface is coated with a 29 microM peptide solution for 2 h. The stability of the EAK16-II nanofibers on both surfaces is further evaluated by immersing the surface into acidic and basic solutions and analyzing the changes in the nanofiber surface coverage. The EAK16-II nanofibers on mica remain stable in acidic solution but not in alkaline solution, while they are stable on the HOPG surface regardless of the solution pH. This work demonstrates the possibility of using self-assembling peptides for surface modification applications.     

Electrospun polyacrylonitrile nanofibrous membranes for lipase immobilization

Polyacrylonitrile (PAN) nanofibers could be fabricated by electrospinning with fiber diameter in the range of 150–300 nm, providing huge surface area for enzyme immobilization and catalytic reactions. Lipase from Candida rugosa was covalently immobilized onto PAN nanofibers by amidination reaction. Aggregates of enzyme molecules were found on nanofiber surface from field emission scanning electron microscopy and covalent bond formation between enzyme molecule and the nanofiber was confirmed from FTIR measurements. After 5 min activation and 60 min reaction with enzyme-containing solution, the protein loading efficiency was quantitative and the activity retention of the immobilized lipase was 81% that of free enzyme. The mechanical strength of the NFM improved after lipase immobilization where tensile stress at break and Young's modulus were almost doubled. The immobilized lipase retained >95% of its initial activity when stored in buffer at 30 °C for 20 days, whereas free lipase lost 80% of its initial activity. The immobilized lipase still retained 70% of its specific activity after 10 repeated batches of reaction. This lipase immobilization method shows the best performance among various immobilized lipase systems using the same source of lipase and substrate when considering protein loading, activity retention, and kinetic parameters.     

Electrospinning of highly porous scaffolds for cartilage regeneration

This study presents a new innovative method where electrospinning is used to coat single microfibers with nanofibers. The nanofiber-coated microfibers can be formed into scaffolds with the combined benefits of tailored porosity for cellular infiltration and nanostructured surface morphology for cell growth. The nanofiber coating is obtained by using a grounded collector rotating around the microfiber, to establish an electrical field yet allow collection of nanofibers on the microfiber. A Teflon tube surrounding the fibers and collector is used to force the nanofibers to the microfiber. Polycaprolactone nanofibers were electrospun onto polylactic acid microfibers and scaffolds of 95 and 97% porosities were made. Human chondrocytes were seeded on these scaffolds and on reference scaffolds of purely nanofibers and microfibers. Thereafter, cellular infiltration was investigated. The results indicated that scaffold porosity had great effects on cellular infiltration, with higher porosity resulting in increased infiltration, thereby confirming the advantage of the presented method.     

Stable and continuous long-term enzymatic reaction using an enzyme–nanofiber composite

This study shows the preparation and application of enzyme–nanofiber composites for long-term stable operation. The enzyme–nanofiber composite was prepared by coating an enzyme aggregate, the esterase from Rhizopus oryzae, on the surface of the nanofibers. After immobilization on the nanofiber, the apparent K _m for the immobilized esterase was 1.48-fold higher than that of the free esterase, with values of 0.98 and 1.35 mM for the free and immobilized enzymes, respectively. It was found that enzyme–nanofiber was very stable, even when the fibers were shaken in glass vials, preserving 80% of the initial activity for 100 days. In addition, the enzyme–nanofiber composite was used repeatedly in 30 cycles of substrate hydrolysis and still remained active. Consequently, the esterase–nanofiber composite was employed within a continuous reactor system to evaluate its use in a long-term and stable continuous substrate hydrolysis reaction. It was found that the production of p-nitrophenol was stable for at least 400 h. This study demonstrates that the enzyme–nanofiber composite can be used in both repeated-batch mode and a continuous mode for a long-term stable operation.