The Flp recombinase cleaves Holliday junctions in trans

The Flp site-specific recombinase is encoded by the 2 µm plasmid of Saccharomyces cerevisiae and is a member of the integrase family of recombinases. Like all members of the integrase family studied, Flp mediates recombination in two steps. First, a pair of strand exchanges creates a Holliday-like intermediate; second, this intermediate is resolved to recombinant products by a second pair of strand exchanges.
Evidence derived from experiments using linear substrates indicates that Flp's active site is composed of two Flp protomers. One binds to the Flp recognition target site (FRT site) and activates the scissile phosphodiester bond for cleavage. Another molecule of Flp bound elsewhere in the synaptic complex ( in trans ) donates the nucleophilic tyrosine that executes cleavage and thereby becomes covalently attached to the 3' phosphoryl group at the cleavage site.
It has previously been shown that Flp efficiently resolves synthetic, Holliday-like (χ) structures to linear products. In this paper, we examined whether resolution of χ structures by Flp also occurs via the trans cleavage mechanism. We used in vitro complementation studies of mutant Flp proteins as well as nicked χ structures to show that Flp resolves χ structures by trans cleavage. We propose a model for Flp-mediated recombination that incorporates trans cleavage at both the initial and resolution steps of strand exchange.     

Active-site assembly and mode of DNA cleavage by Flp recombinase during full-site recombination.

A combination of half-site substrates and step arrest mutants of Flp, a site-specific recombinase of the integrase family, had earlier revealed the following features of the half-site recombination reaction. (i) The Flp active site is assembled by sharing of catalytic residues from at least two monomers of the protein. (ii) A Flp monomer does not cleave the half site to which it is bound (DNA cleavage in cis); rather, it cleaves a half site bound by a second Flp monomer (DNA cleavage in trans). For the lambda integrase (Int protein), the prototype member of the Int family, catalytic complementation between two active-site mutants has been observed in reactions with a suicide attL substrate. By analogy with Flp, this observation is strongly suggestive of a shared active site and of trans DNA cleavage. However, reactions with linear suicide attB substrates and synthetic Holliday junctions are more compatible with cis than with trans DNA cleavage. These Int results either argue against a common mode of active-site assembly within the Int family or challenge the validity of Flp half sites as mimics of the normal full-site substrates. We devised a strategy to assay catalytic complementation between Flp monomers in full sites. We found that the full-site reaction follows the shared active-site paradigm and the trans mode of DNA cleavage. These results suggest that within the Int family, a unitary chemical mechanism of recombination is achieved by more than one mode of physical interaction among the recombinase monomers.     

Functional analysis of box I mutations in yeast site-specific recombinases Flp and R: pairwise complementation with recombinase variants lacking the active-site tyrosine.

The site-specific recombinases Flp and R from Saccharomyces cerevisiae and Zygosaccharomyces rouxii, respectively, are related proteins that belong to the yeast family of site-specific recombinases. They share approximately 30% amino acid matches and exhibit a common reaction mechanism that appears to be conserved within the larger integrase family of site-specific recombinases. Two regions of the proteins, designated box I and box II, also harbor a significantly high degree of homology at the nucleotide sequence level. We have analyzed the properties of Flp and R variants carrying point mutations within the box I segment in substrate-binding, DNA cleavage, and full-site and half-site strand transfer reactions. All mutations abolish or seriously diminish recombinase function either at the substrate-binding step or at the catalytic steps of strand cleavage or strand transfer. Of particular interest are mutations of Arg-191 of Flp and R, residues which correspond to one of the two invariant arginine residues of the integrase family. These variant proteins bind substrate with affinities comparable to those of the corresponding wild-type recombinases. Among the binding-competent variants, only Flp(R191K) is capable of efficient substrate cleavage in a full recombination target. However, this protein does not cleave a half recombination site and fails to complete strand exchange in a full site. Strikingly, the Arg-191 mutants of Flp and R can be rescued in half-site strand transfer reactions by a second point mutant of the corresponding recombinase that lacks its active-site tyrosine (Tyr-343). Similarly, Flp and R variants of Cys-189 and Flp variants at Asp-194 and Asp-199 can also be complemented by the corresponding Tyr-343-to-phenylalanine recombinase mutant.     

DNA sequence determinant for Flp-induced DNA bending

The Flp site-specific recombinase from Saccharomyces cerevisiae induces DNA bending upon interaction with the Flp recognition target (FRT) site. The minimal FRT site comprises the inverted a and b binding elements, which flank a central 8 bp core region. The DNA bend in a complex of two Flp monomers bound to the FRT site is located in the middle of the core region. When the central AT basepair was replaced with a CG, the DNA bend was positioned at the outside end of the core region adjacent to the a binding element. The other basepairs surrounding the central AT basepair were not important to the position of Flp-induced bends. The change also decreased Flp-mediated cleavage of the top strand of the FRT site and increased Flp-mediated cleavage of the bottom strand. The overall recombination proficiency of the site was impaired. We conclude that the central AT basepair provides a point of flexure in the FRT site, which Flp uses to position the bend in dimeric Flp–DNA complexes, and that the structure of the core DNA influences the functionality of the site.     

The strand transfer oligonucleotide inhibitors of HIV-integrase

Retroviral integrase participates in two catalytic reactions, which require interactions with the two ends of the viral DNA in the 3'processing reaction, and with a targeted host DNA in the strand transfer reaction. The 3'-hydroxyl group of 2'-deoxyadenosine resulting from the specific removing of GT dinucleotide from the viral DNA in the processing reaction provides the attachment site for the host DNA in a transesterification reaction. We synthesized oligonucleotides (ONs) of various lengths that mimic the processed HIV-1 U5 terminus of the proviral long terminal repeat (LTR) and are ended by 2'-deoxyadenosine containing a 3'-O-phosphonomethyl group. The duplex stability of phosphonomethyl ONs was increased by covalent linkage of the modified strand with its complementary strand by a triethylene glycol loop (TEG). Modified ONs containing up to 10 bases inhibited in vitro the strand transfer reaction catalyzed by HIV-1 integrase at nanomolar concentrations.     

Specific DNA cleavage mediated by the integrase of conjugative transposon Tn916.

The conjugative transposon Tn916 encodes a protein called INT(Tn916) which, based on DNA sequence comparisons, is a member of the integrase family of site-specific recombinases. Integrase proteins such as INT(lambda), FLP, and XERC/D that promote site-specific recombination use characteristic, conserved amino acid residues to catalyze the cleavage and ligation of DNA substrates during recombination. The reaction proceeds by a two-step transesterification reaction requiring the formation of a covalent protein-DNA intermediate. Different requirements for homology between recombining DNA sites during integrase-mediated site-specific recombination and Tn916 transposition suggest that INT(Tn916) may use a reaction mechanism different from that used by other integrase recombinases. We show that purified INT(Tn916) mediates specific cleavage of duplex DNA substrates containing the Tn916 transposon ends and adjacent bacterial sequences. Staggered cleavages occur at both ends of the transposon, resulting in 5' hydroxyl protruding ends containing coupling sequences. These are sequences that are transferred with the transposon from donor to recipient during conjugative transposition. The nature of the cleavage products suggests that a covalent protein-DNA linkage occurs via a residue of INT(Tn916) and the 3'-phosphate group of the DNA. INT(Tn916) alone is capable of executing the strand cleavage step required for recombination during Tn916 transposition, and this reaction probably occurs by a mechanism similar to that of other integrase family site-specific recombinases.     

Electrostatic Suppression Allows Tyrosine Site-specific Recombination in the Absence of a Conserved Catalytic Arginine

The active site of the tyrosine family site-specific recombinase Flp contains a conserved catalytic pentad that includes two arginine residues, Arg-191 and Arg-308. Both arginines are essential for the transesterification steps of strand cleavage and strand joining in DNA substrates containing a phosphate group at the scissile position. During strand cleavage, the active site tyrosine supplies the nucleophile to form a covalent 3′-phosphotyrosyl intermediate. The 5′-hydroxyl group produced by cleavage provides the nucleophile to re-form a 3′-5′ phosphodiester bond in a recombinant DNA strand. In previous work we showed that substitution of the scissile phosphate (P) by the charge neutral methylphosphonate (MeP) makes Arg-308 dispensable during the catalytic activation of the MeP diester bond. However, in the Flp(R308A) reaction, water out-competes the tyrosine nucleophile (Tyr-343) to cause direct hydrolysis of the MeP diester bond. We now report that for MeP activation Arg-191 is also not required. In contrast to Flp(R308A), Flp(R191A) primarily mediates normal cleavage by Tyr-343 but also exhibits a weaker direct hydrolytic activity. The cleaved MeP-tyrosyl intermediate formed by Flp(R191A) can be targeted for nucleophilic attack by a 5′-hydroxyl or water and channeled toward strand joining or hydrolysis, respectively. In collaboration with wild type Flp, Flp(R191A) promotes strand exchange between MeP- and P-DNA partners. Loss of a catalytically crucial positively charged side chain can thus be suppressed by a compensatory modification in the DNA substrate that neutralizes the negative charge on the scissile phosphate.     

Chimeras of the Flp and Cre recombinases: tests of the mode of cleavage by Flp and Cre

The Flp and Cre recombinases are members of the integrase family of tyrosine recombinases. Each protein consists of a 13 kDa NH(2)-terminal domain and a larger COOH-terminal domain that contains the active site of the enzyme. The COOH-terminal domain also contains the major determinants for the binding specificity of the recombinase to its cognate DNA binding site. All family members cleave the DNA by the attachment of a conserved nucleophilic tyrosine residue to the 3'-phosphate group at the sites of cleavage. In order to gain further insights into the determinants of the binding specificity and modes of cleavage of Flp and Cre, we have made chimeric proteins in which we have fused the NH(2)-terminal domain of Flp to the COOH-terminal domain of Cre ("Fre") and the NH(2)-terminal domain of Cre to the COOH-terminal domain of Flp ("Clp"). These chimeras have novel binding specificities in that they bind strongly to hybrid sites containing elements from both the Flp and Cre DNA targets but poorly to the native target sites.In this study we have taken advantage of the unique binding specificities of Fre and Clp to examine the mode of cleavage by Cre, Flp, Fre and Clp. We find that the COOH-terminal domain of the recombinases determines their mode of cleavage. Thus Flp and Clp cleave in trans whereas Cre and Fre cleave in cis. These results agree with the studies of Flp and with the cocrystal structure of Cre bound to its DNA target site. They disagree with our previous findings that Cre could carry out trans cleavage. We discuss the variations in the experimental approaches in order to reconcile the different results.     

The strand transfer oligonucleotide inhibitors of HIV-integrase

Retroviral integrase participates in two catalytic reactions, which require interactions with the two ends of the viral DNA in the 3′processing reaction, and with a targeted host DNA in the strand transfer reaction. The 3′-hydroxyl group of 2′-deoxyadenosine resulting from the specific removing of GT dinucleotide from the viral DNA in the processing reaction provides the attachment site for the host DNA in a transesterification reaction. We synthesized oligonucleotides (ONs) of various lengths that mimic the processed HIV-1 U5 terminus of the proviral long terminal repeat (LTR) and are ended by 2′-deoxyadenosine containing a 3′-O-phosphonomethyl group. The duplex stability of phosphonomethyl ONs was increased by covalent linkage of the modified strand with its complementary strand by a triethylene glycol loop (TEG). Modified ONs containing up to 10 bases inhibited in vitro the strand transfer reaction catalyzed by HIV-1 integrase at nanomolar concentrations.     

Half-att site substrates reveal the homology independence and minimal protein requirements for productive synapsis in lambda excisive recombination

The early events in site-specific excisive recombination were studied with phage lambda half-att sites that have no DNA to one side of the strand exchange region; they carry a single core-type integrase binding site and either P or P' arm flanking DNA. These half-attR and half-attL sites exhibit normal properties for the initial (covalent) top-strand transfer and form stable intermediates independent of later steps in the reaction. With these novel substrates we show that Xis specifically promotes the first strand exchange and that attL enhances Int cleavage at the top-strand site of attR. It is also shown that synapsis and initial strand transfers do not require DNA-DNA pairing but are mediated by protein-protein and protein-DNA interactions. These involve the two top-strand Int binding sites (required for the first strand exchange) and, in addition, one of the two bottom-strand sites (C') responsible for the second strand exchange.     

Geometry of site alignment during int family recombination: antiparallel synapsis by the Flp recombinase

The Flp site-specific recombinase functions in the copy number amplification of the yeast 2 microm plasmid. The recombination reaction is catalyzed by four monomers of Flp bound to two separate, but identical, recombination sites (FRT sites) and occurs in two sequential pairs of strand exchanges. The relative orientation of the two recombination sites during synapsis was examined. Topoisomerase relaxation and nick ligation were used to detect topological nodes introduced by the synapse prior to the chemical steps of recombination. A single negative supercoil was found to be trapped by Flp in substrates with inverted FRT sites whereas no trapped supercoils were observed with direct repeats. The topology of products resulting from Flp-mediated recombination adjacent to a well characterised synapse, that of Tn3 resolvase/res, was analyzed. The deletion and inversion reactions yielded the four noded catenane and the three noded knot, respectively, as the simplest and the most abundant products. The linking number change introduced by the Flp-mediated inversion reaction was determined to be +/-2. The most parsimonious explanation of these results is that Flp aligns its recombination sites with antiparallel geometry. The majority of synapses appear to occur without entrapment of additional random plectonemic DNA supercoils between the sites and no additional crossings are introduced as a result of the chemical steps of recombination.     

Phage integrases: biology and applications

Phage integrases are enzymes that mediate unidirectional site-specific recombination between two DNA recognition sequences, the phage attachment site, attP, and the bacterial attachment site, attB. Integrases may be grouped into two major families, the tyrosine recombinases and the serine recombinases, based on their mode of catalysis. Tyrosine family integrases, such as lambda integrase, utilize a catalytic tyrosine to mediate strand cleavage, tend to recognize longer attP sequences, and require other proteins encoded by the phage or the host bacteria. Phage integrases from the serine family are larger, use a catalytic serine for strand cleavage, recognize shorter attP sequences, and do not require host cofactors. Phage integrases mediate efficient site-specific recombination between two different sequences that are relatively short, yet long enough to be specific on a genomic scale. These properties give phage integrases growing importance for the genetic manipulation of living eukaryotic cells, especially those with large genomes such as mammals and most plants, for which there are few tools for precise manipulation of the genome. Integrases of the serine family have been shown to work efficiently in mammalian cells, mediating efficient integration at introduced att sites or native sequences that have partial identity to att sites. This reaction has applications in areas such as gene therapy, construction of transgenic organisms, and manipulation of cell lines. Directed evolution can be used to increase further the affinity of an integrase for a particular native sequence, opening up additional applications for genomic modification.     

Ligation activity of FLP recombinase. The strand ligation activity of a site-specific recombinase using an activated DNA substrate.

The FLP protein of the 2-microns plasmid of yeast belongs to the integrase family of site-specific recombinases whose members form a covalent bond between a conserved tyrosine of the recombinase and the 3'-phosphoryl group at the site of cleavage. We have made an activated DNA substrate and have shown that FLP can promote efficient strand ligation without forming a covalent intermediate with the DNA substrate. The strand ligation activity of FLP is independent of its ability to cleave DNA. Since site-specific recombinases are members of the larger class of topoisomerases, these findings may be generally applicable to other members of this class of enzymes.     

Suicide recombination substrates yield covalent lambda integrase-DNA complexes and lead to identification of the active site tyrosine

High levels of covalent integrase-DNA complexes accumulate when suicide substrates containing a medial nick within the overlap region are nicked by lambda integrase protein. The tyrosine residue at position 342 is shown to form a covalent bond with DNA at the sites of strand exchange. A mutant integrase in which this tyrosine is changed to phenylalanine is devoid of both topoisomerase and recombinase activity but still binds to both core- and arm-type DNA binding sites with an affinity comparable to wild-type integrase. Tyrosine-342 is located within a 40-amino acid region that is conserved among 15 known recombinases comprising the "integrase family." The present results show that this small region of homology participates in catalysis of strand transfer.     

DNA recognition, strand selectivity, and cleavage mode during integrase family site-specific recombination

We have probed the association of Flp recombinase with its DNA target using protein footprinting assays. The results are consistent with the domain organization of the Flp protein and with the general features of the protein-DNA interactions revealed by the crystal structures of the recombination intermediates formed by Cre, the Flp-related recombinase. The similarity in the organization of the Flp and Cre target sites and in their recognition by the respective recombinases implies that the overall DNA-protein geometry during strand cleavage in the two systems must also be similar. Within the functional recombinase dimer, it is the interaction between two recombinase monomers bound on either side of the strand exchange region (or spacer) that provides the allosteric activation of a single active site. Whereas Cre utilizes the cleavage nucleophile (the active site tyrosine) in cis, Flp utilizes it in trans (one monomer donating the tyrosine to its partner). By using synthetic Cre and Flp DNA substrates that are geometrically restricted in similar ways, we have mapped the positioning of the active and inactive tyrosine residues during cis and trans cleavage events. We find that, for a fixed substrate geometry, Flp and Cre cleave the labile phosphodiester bond at the same spacer end, not at opposite ends. Our results provide a model that accommodates local heterogeneities in peptide orientations in the two systems while preserving the global functional architecture of the reaction complex.     

Complementation of bacteriophage lambda integrase mutants: evidence for an intersubunit active site.

Site-specific recombination of bacteriophage lambda starts with the formation of higher-order protein--DNA complexes, called 'intasomes', and is followed by a series of steps, including the initial DNA cleavage, top-strand exchange, branch migration and bottom-strand exchange, to produce recombinant products. One of the intasomes formed during excisive recombination (the attL complex) is composed of the phage-encoded integrase (Int), integration host factor (IHF) and one of the recombination substrates, attL DNA. Int is the catalytic recombinase and has two different DNA binding domains. When IHF is present, Int binds to two types of sites in attL DNA, the three arm-type sites (P'123) and the core-type sites (B and C') where the reciprocal strand exchange takes place. The Tyr342 residue of Int serves as a nucleophile during strand cleavage and covalently attaches to the DNA through a phosphotyrosyl bond. In vitro complementation assays have been performed for strand cleavage using attL suicide substrates and mutant proteins containing amino acid substitutions at residues conserved in the integrase family of recombinases. We demonstrate that at least two Int monomers are required to form the catalytically-competent species that performs cleavage at the B site. It is likely that the active site is formed by two Int monomers.     

DNA cleavage in trans by the active site tyrosine during Flp recombination: switching protein partners before exchanging strands.

Each recombination event mediated by the Flp recombinase is the sum of four strand breakage and reunion reactions executed in two steps of two-strand exchanges. The reaction requires four Flp monomers. The key catalytic residue in Flp is Tyr-343. Arg-191, His-305, and Arg-308 appear to facilitate the cleavage and exchange steps of recombination. These four residues constitute the invariant tetrad of the Int family site-specific recombinases. Complementation tests between "step-arrest" mutants of Flp suggest that each Flp protomer harbors a "fractional active site." Hybrid "half site-recombinase" complexes reveal that efficient catalysis occurs when the Arg-His-Arg triad is present on one Flp monomer and the active site Tyr on a second monomer. Strand cleavage by an Flp monomer occurs virtually exclusively on the half site to which its partner protein is bound (cleavage in trans), and almost never on the half site to which it is bound (cleavage in cis). Trans-cleavage by Flp can provide a means for functionally exchanging Flp monomers between two DNA partners. Such a mechanism would be germane to recombination, since cleavage and rejoining in cis can only restore the parental substrate configuration and cannot yield recombinants.     

Major groove interactions of vaccinia Topo I provide specificity by optimally positioning the covalent phosphotyrosine linkage

Vaccinia DNA topoisomerase (vTopo) is a prototypic eukaryotic type I topoisomerase that shows high specificity for nucleophilic substitution at a single phosphodiester linkage in the pentapyrimidine recognition sequence 5'-(C/T)+5 C+4 C+3 T+2 T+1 p / N(-1). This reaction involves reversible transesterification where the active site tyrosine of the enzyme and a 5'-hydroxyl nucleophile of DNA compete for attack at the phosphoryl group. The finite lifetime of the covalent phosphotyrosine adduct allows the enzyme to relax multiple supercoils by rotation of the 5'-OH strand before the DNA backbone is religated. To dissect the nature of the unique sequence specificity, subtle modifications to the major groove of the GGGAA 5'-sequence of the nonscissile strand were introduced and their effects on each step of the catalytic cycle were measured. Although these modifications had no effect on noncovalent DNA binding (K(D)) or the rate of reversible DNA cleavage (k(cl)), significant decreases in the cleavage equilibrium (K(cl) = k(cl)/k(r)) arising from increased rates of 5'-hydroxyl attack (k(r)) at the phosphotyrosine linkage were observed. These data and other findings support a model in which major groove interactions are used to position the phosphotyrosine linkage relative to the mobile 5'-hydroxyl nucleophile. In the absence of native sequence interactions, the phosphotyrosine has a higher probability of encountering the 5'-hydroxyl nucleophile, leading to an enhanced rate of ligation and a diminished equilibrium constant for cleavage. By this unusual specificity mechanism, the enzyme prevents formation of stable covalent adducts at nonconsensus sites in genomic DNA.     

Use of green fluorescent protein/Flp recombinase fusion protein and flow cytometric sorting to enrich for cells undergoing Flp-mediated recombination

Flp recombinase has been used extensively for in vivo manipulation of eukaryotic DNA at specific sequences designated as FRT sites. We developed a method to use Flp-mediated recombination without the need for drug resistance or metabolic selection of cells in which recombination has occurred. We generated expression plasmids directing expression of fusion proteins consisting of Flp recombinase and green fluorescent protein (GFP) coding sequences. When the plasmids were introduced into K562 cells containing Flp recombinase substrates and transfected cells were selected for by flow cytometric sorting, GFP-positive cells were enriched 5- to 30-fold for Flp-mediated recombination events compared with unsorted cells. These studies demonstrate the usefulness of GFP/Flp recombinase fusion proteins to manipulate chromosomal DNA in vivo without requiring drug resistance or metabolic marker genes.     

Half-site recombinations mediated by yeast site-specific recombinases Flp and R.

The Flp recombinase of Saccharomyces cerevisae and the related R recombinase of Zygosaccharomyces rouxii can efficiently catalyze strand cleavage and strand exchange reactions in half recombination sites. A half-site consists of one recombinase binding element, a recombinase cleavage site on one strand and a 5' spacer hydroxyl group on the other that can initiate the strand exchange reaction. We have studied the various types of strand exchanges that half-sites can participate in. Reaction between a left half-site and a right half-site generates a full recombination site. Strand transfer between two left half-sites or between two right half-sites produces pseudo-full-sites. Strand transfer within a half-site results in a stem-loop or hairpin product. The half-site strand transfer reaction is fairly indifferent to the spacer sequence of the substrate per se and is less sensitive to variations in spacer lengths than a full-site recombination reaction. The optimal spacer length of eight to ten nucleotides observed for the Flp half-site reaction likely permits the most productive catalytic interactions between two Flp monomers bound to each of two partner half-sites. When reacted with a full-site, the half-site can give rise to a normal or reverse recombinant, corresponding to homologous or non-homologous alignments of the spacer sequences during substrate synapsis. The contrary recombination (resulting from non-homologous spacer alignment), whose level is low relative to normal recombination, is partly suppressed when the half-site spacer ends in a 5'-phosphate rather than a 5'-hydroxyl group. Thus, the early steps of recombination, namely synapsis and initial stand transfer, are not dependent on complete spacer homology between the two recombining substrates. The selection of properly aligned substrate partners must occur at the homology dependent branch migration step. In reactions containing a mixture of Flp and R half-sites, Flp and R catalyze strand transfer, almost exclusively, within or between their respective cognate substrates. However, under conditions where self-crosses are inhibited, strand exchange between a Flp half-site and an R half-site appears to be stimulated by a combination of R and Flp.