OmcB,a c-type polyheme cytochrome,involved in Fe(III) reduction in Geobacter sulfurreducens

Microorganisms in the family Geobacteraceae are the predominant Fe(III)-reducing microorganisms in a variety of subsurface environments in which Fe(III) reduction is an important process, but little is known about the mechanisms for electron transport to Fe(III) in these organisms. The Geobacter sulfurreducens genome was found to contain a 10-kb chromosomal duplication consisting of two tandem three-gene clusters. The last genes of the two clusters, designated omcB and omcC, encode putative outer membrane polyheme c-type cytochromes which are 79% identical. The role of the omcB and omcC genes in Fe(III) reduction in G. sulfurreducens was investigated. OmcB and OmcC were both expressed during growth with acetate as the electron donor and either fumarate or Fe(III) as the electron acceptor. OmcB was ca. twofold more abundant under both conditions. Disrupting omcB or omcC by gene replacement had no impact on growth with fumarate. However, the OmcB-deficient mutant was greatly impaired in its ability to reduce Fe(III) both in cell suspensions and under growth conditions. In contrast, the ability of the OmcC-deficient mutant to reduce Fe(III) was similar to that of the wild type. When omcB was reintroduced into the OmcB-deficient mutant, the capacity for Fe(III) reduction was restored in proportion to the level of OmcB production. These results indicate that OmcB, but not OmcC, has a major role in electron transport to Fe(III) and suggest that electron transport to the outer membrane is an important feature in Fe(III) reduction in this organism.     

3‐D analysis of bacterial cell‐(iron)mineral aggregates formed during Fe(II) oxidation by the nitrate‐reducing Acidovorax sp. strain BoFeN1 using complementary microscopy tomography approaches

The formation of cell‐(iron)mineral aggregates as a consequence of bacterial iron oxidation is an environmentally widespread process with a number of implications for processes such as sorption and coprecipitation of contaminants and nutrients. Whereas the overall appearance of such aggregates is easily accessible using 2‐D microscopy techniques, the 3‐D and internal structure remain obscure. In this study, we examined the 3‐D structure of cell‐(iron)mineral aggregates formed during Fe(II) oxidation by the nitrate‐reducing Acidovorax sp. strain BoFeN1 using a combination of advanced 3‐D microscopy techniques. We obtained 3‐D structural and chemical information on different cellular encrustation patterns at high spatial resolution (4–200 nm, depending on the method): more specifically, (1) cells free of iron minerals, (2) periplasm filled with iron minerals, (3) spike‐ or platelet‐shaped iron mineral structures, (4) bulky structures on the cell surface, (5) extracellular iron mineral shell structures, (6) cells with iron mineral filled cytoplasm, and (7) agglomerations of extracellular globular structures. In addition to structural information, chemical nanotomography suggests a dominant role of extracellular polymeric substances (EPS) in controlling the formation of cell‐(iron)mineral aggregates. Furthermore, samples in their hydrated state showed cell‐(iron)mineral aggregates in pristine conditions free of preparation (i.e., drying/dehydration) artifacts. All these results were obtained using 3‐D microscopy techniques such as focused ion beam (FIB)/scanning electron microscopy (SEM) tomography, transmission electron microscopy (TEM) tomography, scanning transmission (soft) X‐ray microscopy (STXM) tomography, and confocal laser scanning microscopy (CLSM). It turned out that, due to the various different contrast mechanisms of the individual approaches, and due to the required sample preparation steps, only the combination of these techniques was able to provide a comprehensive understanding of structure and composition of the various Fe‐precipitates and their association with bacterial cells and EPS.     

Fluorescent properties of c-type cytochromes reveal their potential role as an extracytoplasmic electron sink in Geobacter sulfurreducens

A novel fluorescence technique for monitoring the redox status of c-type cytochromes in Geobacter sulfurreducens was developed in order to evaluate the capacity of these extracytoplasmic cytochromes to store electrons during periods in which an external electron acceptor is not available. When intact cells in which the cytochromes were in a reduced state were excited at a wavelength of 350 nm, they fluoresced with maxima at 402 and 437 nm. Oxidation of the cytochromes resulted in a loss of fluorescence. This method was much more sensitive than the traditional approach of detecting c-type cytochromes via visible light absorbance. Furthermore, fluorescence of reduced cytochromes in individual cells could be detected via fluorescence microscopy, and the cytochromes in a G. sulfurreducens biofilm, remotely excited with an optical fibre, could be detected at distances as far as 5 cm. Fluorescence analysis of cytochrome oxidation and reduction of the external electron acceptor, anthraquinone-2,6-disulfonate, suggested that the extracytoplasmic cytochromes of G. sulfurreducens could store approximately 10(7) electrons per cell. Independent analysis of the haem content of the cells determined from analysis of incorporation of (55)Fe into cytochromes provided a similar estimate of cytochrome electron-storage capacity. This electron-storage capacity could, in the absence of an external electron acceptor, permit continued electron transfer across the inner membrane sufficient to supply the maintenance energy requirements for G. sulfurreducens for up to 8 min or enough proton motive force to power flagella motors for G. sulfurreducens motility. The fluorescence approach described here provides a sensitive method for evaluating the redox status of Geobacter species in culture and/or its environments. Furthermore, these results suggest that the periplasmic and outer-membrane cytochromes of Geobacter species act as capacitors, allowing continued electron transport, and thus viability and motility, for Geobacter species as they move between heterogeneously dispersed Fe(III) oxides during growth in the subsurface.     

The periplasmic 9.6-kilodalton c-type cytochrome of Geobacter sulfurreducens is not an electron shuttle to Fe(III)

Geobacter sulfurreducens contains a 9.6-kDa c-type cytochrome that was previously proposed to serve as an extracellular electron shuttle to insoluble Fe(III) oxides. However, when the cytochrome was added to washed-cell suspensions of G. sulfurreducens it did not enhance Fe(III) oxide reduction, whereas similar concentrations of the known electron shuttle, anthraquinone-2,6-disulfonate, greatly stimulated Fe(III) oxide reduction. Furthermore, analysis of the extracellular c-type cytochromes in cultures of G. sulfurreducens demonstrated that the dominant c-type cytochrome was not the 9.6-kDa cytochrome, but rather a 41-kDa cytochrome. These results and other considerations suggest that the 9.6-kDa cytochrome is not an important extracellular electron shuttle to Fe(III) oxides.     

Evidence that OmcB and OmpB of Geobacter sulfurreducens are outer membrane surface proteins

The c-type cytochrome (OmcB) and the multicopper protein (OmpB) required for Fe(III) oxide reduction by Geobacter sulfurreducens were predicted previously to be outer membrane proteins, but it is not clear whether they are positioned in a manner that permits the interaction with Fe(III). Treatment of whole cells with proteinase K inhibited Fe(III) reduction, but had no impact on the inner membrane-associated fumarate reduction. OmcB was digested by protease, resulting in a smaller peptide. However, immunogold labeling coupled with transmission electron microscopy did not detect OmcB, suggesting that it is only partially exposed on the cell surface. In contrast, OmpB was completely digested with protease. OmpB was loosely associated with the cell surface as a substantial portion of it was recovered in the culture supernatant. Immunogold labeling demonstrated that OmpB associated with the cell was evenly distributed on the cell surface rather than localized to one side of the cell like the conductive pili. Although several proteins required for Fe(III) oxide reduction are shown to be exposed on the outer surface of G. sulfurreducens, the finding that OmcB is also surface exposed is the first report of a protein required for optimal Fe(III) citrate reduction at least partially accessible on the cell surface.     

Frequency, size, and localization of bacterial aggregates on bean leaf surfaces

Using epifluorescence microscopy and image analysis, we have quantitatively described the frequency, size, and spatial distribution of bacterial aggregates on leaf surfaces of greenhouse-grown bean plants inoculated with the plant-pathogenic bacterium Pseudomonas syringae pv. syringae strain B728a. Bacterial cells were not randomly distributed on the leaf surface but occurred in a wide range of cluster sizes, ranging from single cells to over 10(4) cells per aggregate. The average cluster size increased through time, and aggregates were more numerous and larger when plants were maintained under conditions of high relative humidity levels than under dry conditions. The large majority of aggregates observed were small (less than 100 cells), and aggregate sizes exhibited a strong right-hand-skewed frequency distribution. While large aggregates are not frequent on a given leaf, they often accounted for the majority of cells present. We observed that up to 50% of cells present on a leaf were located in aggregates containing 10(3) cells or more. Aggregates were associated with several different anatomical features of the leaf surface but not with stomates. Aggregates were preferentially associated with glandular trichomes and veins. The biological and ecological significance of aggregate formation by epiphytic bacteria is discussed.     

Isotopic labeling of c-type multiheme cytochromes overexpressed in E. coli

Progresses made in bacterial genome sequencing show a remarkable profusion of multiheme c-type cytochromes in many bacteria, highlighting the importance of these proteins in different cellular events. However, the characterization of multiheme cytochromes has been significantly retarded by the numerous experimental challenges encountered by researchers who attempt to overexpress these proteins, especially if isotopic labeling is required. Here we describe a methodology for isotopic labeling of multiheme cytochromes c overexpressed in Escherichia coli, using the triheme cytochrome PpcA from Geobacter sulfurreducens as a model protein. By combining different strategies previously described and using E. coli cells containing the gene coding for PpcA and the cytochrome c maturation gene cluster, an experimental labeling methodology was developed that is based on two major aspects: (i) use of a two-step culture growth procedure, where cell growth in rich media was followed by transfer to minimal media containing (15)N-labeled ammonium chloride, and (ii) incorporation of the heme precursor delta-aminolevulinic acid in minimal culture media. The yields of labeled protein obtained were comparable to those obtained for expression of PpcA in rich media. Proper protein folding and labeling were confirmed by UV-visible and NMR spectroscopy. To our knowledge, this is the first report of a recombinant multiheme cytochrome labeling and it represents a major breakthrough for functional and structural studies of multiheme cytochromes.     

The presence of multiple c-type cytochromes at the surface of the methanotrophic bacterium Methylococcus capsulatus (Bath) is regulated by copper

Identification of surface proteins is essential to understand bacterial communication with its environment. Analysis of the surface-associated proteins of Methylococcus capsulatus (Bath) revealed a highly dynamic structure responding closely to the availability of copper in the medium in the range from approximately 0 to 10 microM. Several c-type cytochromes, including three novel multihaem proteins, are present at the cellular surface, a feature that is otherwise a peculiarity of dissimilatory metal-reducing bacteria. At low copper concentrations, the cytochrome c(553o) and the cytochrome c(553o) family protein, encoded by the MCA0421 and MCA0423 genes, respectively, are major constituents of the surfaceome and show a fine-tuned copper-dependent regulation of expression. Two novel members of the cytochrome c(553o) family were identified: MCA0338 was abundant between 5 and 10 microM copper, while MCA2259 was detected only in the surface fraction obtained from approximately 0 microM copper cultures. The presence at the bacterial surface of several c-type cytochromes, generally involved in energy transduction, indicates strongly that redox processes take place at the bacterial surface. Due to the unique role of copper in the biology of M. capsulatus (Bath), it appears that c-type cytochromes have essential functions in copper homeostasis allowing the cells to adapt to varying copper exposure.     

Frequency, Size, and Localization of Bacterial Aggregates on Bean Leaf Surfaces

Using epifluorescence microscopy and image analysis, we have quantitatively described the frequency, size, and spatial distribution of bacterial aggregates on leaf surfaces of greenhouse-grown bean plants inoculated with the plant-pathogenic bacterium Pseudomonas syringae pv. syringae strain B728a. Bacterial cells were not randomly distributed on the leaf surface but occurred in a wide range of cluster sizes, ranging from single cells to over 10⁴ cells per aggregate. The average cluster size increased through time, and aggregates were more numerous and larger when plants were maintained under conditions of high relative humidity levels than under dry conditions. The large majority of aggregates observed were small (less than 100 cells), and aggregate sizes exhibited a strong right-hand-skewed frequency distribution. While large aggregates are not frequent on a given leaf, they often accounted for the majority of cells present. We observed that up to 50% of cells present on a leaf were located in aggregates containing 10³ cells or more. Aggregates were associated with several different anatomical features of the leaf surface but not with stomates. Aggregates were preferentially associated with glandular trichomes and veins. The biological and ecological significance of aggregate formation by epiphytic bacteria is discussed.     

Application of fluorescently labelled lectins for the visualization and biochemical characterization of polysaccharides in biofilms of Pseudomonas aeruginosa

Fluorescently labelled lectins were used in combination with epifluorescence microscopy and confocal laser scanning microscopy to allow the visualization and characterization of carbohydrate-containing extracellular polymeric substances (EPS) in biofilms of Pseudomonas aeruginosa. A mucoid strain characterized by an overproduction of the exopolysaccharide alginate, and an isogenic, non-mucoid strain were used. Model biofilms grown on polycarbonate filters were treated with lectins concanavalin A (ConA) and wheat germ agglutinin (WGA) that were fluorescently labelled with fluorescein isothiocyanate or tetramethyl rhodamine isothiocyanate. Fluorescently labelled ConA yielded cloud-like regions that were heterogeneously distributed within mucoid biofilms, whereas these structures were only rarely present in biofilms of the non-mucoid strain. The bacteria visualized with the fluorochrome SYTO 9 were localized both within and between the ConA-stained regions. In WGA-treated biofilms, the lectin was predominantly associated with bacterial cells. Alginate seemed to be involved in the interaction of ConA with the EPS matrix, since (i) pre-treatment of biofilms with an alginate lyase resulted in a loss of ConA biofilm staining, and (ii) using an enzyme-linked lectinsorbent assay (ELLA), ConA was shown to bind to purified alginate, but not to alginate that was degraded by alginate lyase. The application of fluorescently labelled lectins in combination with ELLA was found to be useful for the visualization and characterization of extracellular polysaccharide structures in P. aeruginosa biofilms.     

Dual Roles of Capsular Extracellular Polymeric Substances in Photocatalytic Inactivation of Escherichia coli: Comparison of E. coli BW25113 and Isogenic Mutants

The dual roles of capsular extracellular polymeric substances (EPS) in the photocatalytic inactivation of bacteria were demonstrated in a TiO₂-UVA system, by comparing wild-type Escherichia coli strain BW25113 and isogenic mutants with upregulated and downregulated production of capsular EPS. In a partition system in which direct contact between bacterial cells and TiO₂ particles was inhibited, an increase in the amount of EPS was associated with increased bacterial resistance to photocatalytic inactivation. In contrast, when bacterial cells were in direct contact with TiO₂ particles, an increase in the amount of capsular EPS decreased cell viability during photocatalytic treatment. Taken together, these results suggest that although capsular EPS can protect bacterial cells by consuming photogenerated reactive species, it also facilitates photocatalytic inactivation of bacteria by promoting the adhesion of TiO₂ particles to the cell surface. Fluorescence microscopy and scanning electron microscopy analyses further confirmed that high capsular EPS density led to more TiO₂ particles attaching to cells and forming bacterium-TiO₂ aggregates. Calculations of interaction energy, represented by extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) potential, suggested that the presence of capsular EPS enhances the attachment of TiO₂ particles to bacterial cells via acid-base interactions. Consideration of these mechanisms is critical for understanding bacterium-nanoparticle interactions and the photocatalytic inactivation of bacteria.     

Behavior,activities, and effects of bacteria on synthetic quartz monocrystal surfaces

Two strains ofBacillus sp. and a strain ofBrevibacterium sp., originally isolated from a natural quartzite surface, were characterized and employed as test strains with several methods: acridine orange fluorochromation and epifluorescence microscopy were used for detection of individual cells; scanning and transmission microscopy for studying attachment behavior; replica techniques in combination with electron microscopy for following surface interaction effects; and chemical analysis of SiO₂ for detecting possible silica leaching activities. The experimental results clearly showed that the three test strains were able to attach to and grow on the precleaned quartz surfaces. Attachment modes were either by direct sorption mechanisms (Brevibacterium sp. S) or the production of adhesive polymers (Bacillus sp. U andBacillus sp. W). In short-term contact incubation experiments with rich media, neither quartz crystal surface structures nor bacterial cell surfaces appeared to be changed. Likewise, significant biochemical dissolution and mechanical dislocation of SiO₂ (which would have indicated rapid bacterial weathering activities) could not be detected. The importance of quartz purity and crystalline structure for the initiation of weathering processes is discussed.