Lead, copper and zinc biosorption from bicomponent systems modelled by empirical Freundlich isotherm

The biosorption of lead, copper and zinc ions on Rhizopus arrhizus has been studied for three single-component and two binary systems. The equilibrium data have been analysed using the Freundlich adsorption model. The characteristic parameters for the Freundlich adsorption model have been determined and the competition coefficients for the competitive biosorption of Pb(II)-Cu(II) at pH 4.0 and 5.0, and Pb(II)-Zn(II) at pH 5.0 have been calculated. For the individual single-component isotherms, lead has the highest biosorption capacity followed by copper, then zinc. The capacity of lead in the two binary systems is always significantly greater than those of the other metal ions, in agreement with the single-component data. Only a partial selectivity for copper ions has been obtained at pH 4.0. Received: 21 June 1999 / Accepted: 2 November 1999     

Zn biosorption by Rhizopus arrhizus and other fungi

Biosorption of zinc ions by inactivated fungal mycelia was studied. Of the six fungal species, Rhizopus arrhizus, Mucor racemosus, Mycotypha africana, Aspergillus nidulans, Aspergillus niger and Schizosaccharomyces pombe, R. arrhizus exhibited the highest capacity (Q ^max = 213 μmol g⁻¹ dry weight). Further experiments with different cellular fractions of R. arrhizus showed that Zn was predominantly bound to cell-wall chitin and chitosan (Q ^max = 312 μmol g⁻¹ dry weight). Adsorption data were best modelled by the Langmuir isotherm, although they can be modelled by the Freundlich equation as well at relatively low aqueous concentrations. Biosorption generally decreased with increase in biosorbent particle size and its concentration. Low pH reduced Zn sorption, because of the strong competition from hydrogen ions for binding sites on fungi. The presence of ligands reduced metal uptake, chiefly by forming metal complexes of a less biosorbable nature. Received: 2 November 1998 / Received revision: 12 January 1999 / Accepted: 17 January 1999     

Biosorbents for recovery of metals from industrial solutions

Summary Biosorbent materials are a potential alternative to conventional processes of metal recovery from industrial solutions. Algal biomass ofSargassum natans andAscophyllum nodosum outperformed ion exchange resins in sequestering respectively gold and cobalt from solutions. Non-living biomass ofSaccharomyces cerevisiae andRhizopus arrhizus exhibited higher metal-uptake capacity than the living biomass for the uptake of copper, zinc, cadmium, uranium. The solution pH affected the metal-uptake capacity of the biomass whereas the equilibrium biosorption isotherms were independent of the initial concentration of the metal in the solution. Desorption of the metal from the biosorbent and recycle of the biosorbent have also been demonstrated.     

Improvement of heavy metal biosorption by mycelial dead biomasses (Rhizopus arrhizus, Mucor miehei and Penicillium chrysogenum): pH control and cationic activation

Abstract: Fungal mycelial by-products from fermentation industries present a considerable affinity for soluble metal ions (e.g. Zn, Cd, Ni, Pb, Cr, Ag) and could be used in biosorption processes for purification of contaminated effluents. In this work the influence of pH on sorption parameters is characterized by measuring the isotherms of five heavy metals (Ni, Zn, Cd, Ag and Pb) with Rhizopus arrhizus biomass under pH-controlled conditions. The maximum sorption capacity for lead was observed at pH 7.0 (200 mg g^-l), while silver uptake was weakly affected. The stability of metal-biosorbent complexes is regularly enhanced by pH neutralization, except for lead. A transition in sorption mechanism was observed above pH 6.0. In addition, comparison of various industrial fungal biomasses ( R. arrhizus, Mucor miehei and Penicillium chrysogenum indicated important variations in zinc-binding and buffering properties (0.24, 0.08 and 0.05 mmol g^−l, respectively). Without control, the equilibrium pH (5.8, 3.9 and 4.0) is shown to be related to the initial calcium content of the biosorbent, pH neutralization during metal adsorption increases zinc sorption in all fungi (0.57, 0.52 and 0.33 mmol g-l) but an improvement was also obtained (0.34, 0.33 and 0.10 mmol g⁻¹) by calcium saturation of the biomass before heavy metal accumulation. Breakthrough curves of fixed bed biosorbent columns demonstrated the capacity of the biosorbent process to purify zinc and lead solutions in continuous-flow systems, and confirmed the necessity for cationic activation of the biosorbent before contact with the heavy-metal solution.     

Metal-binding capacity of arbuscular mycorrhizal mycelium

Experiments with excised mycelium of several Glomus spp. with different histories of exposure to heavy metals were carried out to measure their capacities to bind Cd and Zn. Cd sorption was followed for up to 6 h of incubation to determine its time course relationships. Controls treated with a metabolic inhibitor were included to evaluate whether sorption was due to active uptake or passive adsorption. The effect of ion competition (effects of Ca or Zn on Cd sorption) and general measurements of cation exchange capacity (CEC) of roots and hyphae were also performed. The results showed that AM mycelium has a high metal sorption capacity relative to other microorganisms, and a CEC comparable to other fungi. Metal sorption was rapid (<30 min) and appeared mainly to be due to passive adsorption. Adsorption was highest in a metal-tolerant G. mosseae isolate and intermediate for a fungus isolated from a soil treated with metal-contaminated sludge. The former adsorbed up to 0.5 mg Cd per mg dry biomass, which was three times the binding capacity of non-tolerant fungi, and more than 10 times higher than reported values for, e.g., the commonly used biosorption organism Rhizopus arrhizus. The implications of these results for AM involvement in plant protection against excess heavy metal uptake are discussed. This revised version was published online in June 2006 with corrections to the Cover Date.     

Biosorption of uranium and thorium

Selected samples of waste microbial biomass originating from various industrial fermentation processes and biological treatment plants have been screened for biosorbent properties in conjunction with uranium and thorium in aqueous solutions. Biosorption isotherms have been used for the evaluation of biosorptive uptake capacity of the biomass which was also compared to an activated carbon and the ion exchange resin currently used in uranium production processes. Determined uranium and thorium biosorption isotherms were independent of the initial U or Th solution concentration. Solution pH affected the exhibited uptake. In general, lower biosorptive uptake was exhibited at pH 2 than at pH 4. No discernible difference in uptake was observed between pH 4 and pH 5 where the optimum pH for biosorption lies. The biomass of Rhizopus arrhizus at pH 4 exhibited the highest uranium and thorium biosorptive uptake capacity (g) in excess of 180 mg/g. At an equilibrium uranium concentration of 30 mg/liter, R. arrhizus removed approximately 2.5 and 3.3 times more uranium than the ion exchange resin and activated carbon, respectively. Under the same conditions, R. arrhizus removed 20 times more thorium than the ion exchange resin and 2.3 times more than the activated carbon. R. arrhizus also exhibited higher uptake and a generally more favorable isotherm for both uranium and thorium than all other biomass types examined.     

Copper adsorption by Rhizopus arrhizus,Cladosporium resinae and Penicillium italicum

Summary Copper adsorption by Rhizopus arrhizus, Cladosporium resinae and Penicillium italicum was studied using a copper-selective electrode. Copper adsorption by C. resinae and P. italicum obeyed the Freundlich and Langmuir isotherms for single-layer adsorption whereas R. arrhizus followed the BET isotherm for multi-layer adsorption. Temperature had little effect on adsorption over the range 4–25°C. Mineral acids were effective for desorption of copper from preloaded biomass, the efficiency of desorption increasing with decreasing pH. Other cations were also capable of copper desorption with zinc showing the greatest efficiency and sodium the lowest.     

Study on the Adsorption of Cr3+ by Peanut Shell: Adsorption Kinetics,Thermodynamics, and Isotherm Properties

The pollution of heavy metals in soil to the environment is becoming more and more serious, resulting in the reduction of crop production and the occurrence of medical accidents. In order to remove heavy metal ions from soil and reduce the harm of heavy metals to the environment, modified peanut shell was used to adsorb Cr³⁺ in this article. The effects of different adsorption conditions on the adsorption rate and adsorption capacity of Cr³⁺ on ZnCl₂ modified peanut shell were studied, the best adsorption conditions were explored, and the relationship of kinetics, thermodynamics and adsorption isotherm properties of adsorption process were explored. The results showed that the optimum adsorption pH value, dosage, initial concentration, adsorption temperature and contact time of ZnCl₂ modified peanut shell were 2.5, 2.5 g/L, 75 μg/mL, 25 °C and 40 min, respectively. The prepared materials were characterized and analyzed by scanning electron microscope (SEM) and X-ray diffraction (XRD) analyzer. It was concluded that the modified peanut shell had a good adsorption capacity to Cr³⁺. The kinetic study showed that the adsorption process of Cr³⁺ on peanut shell modified by zinc chloride was in accordance with the quasi-second-order kinetic model. The adsorption process belonged to exothermic reaction and belonged to spontaneous reaction process. In summary, it is proved that zinc chloride modified peanut shell can efficiently adsorb Cr³⁺, which can be used for the treatment of heavy metal wastes in industry, which is beneficial to environmental protection and avoid heavy metal pollution.     

Biosorption of americium using biomasses of various Rhizopus species

Biomasses from eight different Rhizopus species were tested for the sorption of americium from nitric acid medium. Rhizopus arrhizus NCIM 997 showed maximum sorption at pH 2. Laboratory scale experiments were carried out using this biomass in packed columns for the sorption of -activity from an americium spiked low level waste stream of PUREX process. The biomass was found to be an excellent sorbent for remediation of low level waste streams on once through basis.     

Biosorption of lead, cadmium, and zinc by Citrobacter strain MCM B-181: characterization studies

The biosorption process for removal of lead, cadmium, and zinc by Citrobacter strain MCM B-181, a laboratory isolate, was characterized. Effects of environmental factors and growth conditions on metal uptake capacity were studied. Pretreatment of biomass with chemical agents increased cadmium sorption efficiency; however, there was no significant enhancement in lead and zinc sorption capacity. Metal sorption by Citrobacter strain MCM B-181 was found to be influenced by the pH of the solution, initial metal concentration, biomass concentration, and type of growth medium. The metal sorption process was not affected by the age of the culture or change in temperature. Equilibrium metal sorption was found to fit the Langmuir adsorption model. Kinetic studies showed that metal uptake by Citrobacter strain MCM B-181 was a fast process, requiring <20 min to achieve >90% adsorption efficiency. The presence of cations reduced lead, zinc, and cadmium sorption to the extent of 11. 8%, 84.3%, and 33.4%, respectively. When biomass was exposed to multimetal solutions, metals were adsorbed in the order Co2+ < Ni2+ < Cd2+ < Cu2+ < Zn2+ < Pb2+. Among various anions tested, only phosphate and citrate were found to hamper metal sorption capacity of cells. Biosorbent beads prepared by immobilizing the Citrobacter biomass in polysulfone matrix exhibited high metal loading capacities. A new mathematical model used for batch kinetic studies was found to be highly useful in prediction of experimentally obtained metal concentration profiles as a function of time. Metal desorption studies indicated that Citrobacter beads could, in principle, be regenerated and reused in adsorption-desorption cycles. In an expanded scale trial, biosorbent beads were found to be useful in removal/recovery of metals such as lead from industrial wastewaters.     

Immobilisation protocols and effects on Cadmium uptake by Rhizopus arrhizus Biosorbents

Summary Protocols were developed for the immobilisation of Rhizopus arrhizus biomass using alginate, polyacrylamide, epoxy resin and polyvinylformal materials and the resulting biosorbents were tested for the removal of cadmium from solution. Polyvinyl formal immobilisation produced the optimal biosorbent with cell loadings of up to 80% and metal adsorption capacities of 84% of that of free biomass.     

Heavy metal uptake capacities by the common freshwater green alga Cladophora fracta

Macroalgae have received much attention for heavy metal removal in treatment of domestic wastewater. In this report, the uptake capacity of a common freshwater green alga, Cladophora fracta, for heavy metal ions (copper, zinc, cadmium, and mercury) was evaluated. The equilibrium adsorption capacities were 2.388?mg Cu²⁺, 1.623?mg Zn²⁺, 0.240?mg Cd²⁺, and 0.228?mg Hg²⁺ per gram of living algae at 18°C and pH?5.0. The removal efficiency for Cu²⁺, Zn²⁺, Cd²⁺, and Hg²⁺ were 99, 85, 97, and 98%, respectively. Greater removal efficiency was achieved when the concentrations of metal ions were at very low level. The results indicated that living algae are suitable for removal and recovery of heavy metal ions from aqueous solutions and can be a potential tool to treat industrial wastewater.     

Uptake of Metal Ions by Rhizopus arrhizus Biomass

Rhizopus arrhizus biomass was found to absorb a variety of different metal cations and anions but did not absorb alkali metal ions. The amount of uptake of the cations was directly related to ionic radii of La³⁺, Mn²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Ba²⁺, Hg²⁺, Pb²⁺, UO₂²⁺, and Ag⁺. The uptake of all the cations is consistent with absorption of the metals by sites in the biomass containing phosphate, carboxylate, and other functional groups. The uptake of the molybdate and vanadate anions was strongly pH dependent, and it is proposed that the uptake mechanism involves electrostatic attraction to positively charged functional groups.     

Direct fermentation of potato starch wastewater to lactic acid by Rhizopus oryzae and Rhizopus arrhizus

The biochemical kinetic of direct fermentation for lactic acid production by fungal species of Rhizopus arrhizus 3,6017 and Rhizopus oryzae 2,062 was studied with respect to growth pH, temperature and substrate. The direct fermentation was characterized by starch hydrolysis, accumulation of reducing sugar, and production of lactic acid and fungal biomass. Starch hydrolysis, reducing sugar accumulation, biomass formation and lactic acid production were affected with the variations in pH, temperature, and starch source and concentration. A growth condition with starch concentration approximately 20 g/l at pH 6.0 and 30°C was favourable for both starch saccharification and lactic acid fermentation, resulting in lactic acid yield of 0.87–0.97 g/g starch associated with 1.5–2.0 g/l fungal biomass produced in 36 h fermentation. R. arrhizus 3,6017 had a higher capacity to produce lactic acid, while R. oryzae 2,062 produced more fungal biomass under similar conditions.     

Immobilization of blue green microalgae on loofa sponge to biosorb cadmium in repeated shake flask batch and continuous flow fixed bed column reactor system

Summary An indigenous strain of blue green microalga, Synechococcus sp., isolated from wastewater, was immobilized onto loofa sponge discs and investigated as a potential biosorbent for the removal of cadmium from aqueous solutions. Immobilization has enhanced the sorption of cadmium and an increase of biosorption (21%) at equilibrium was noted as compared to free biomass. The kinetics of cadmium biosorption was extremely rapid, with (96%) of adsorption within the first 5 min and equilibrium reached at 15 min. Increasing initial pH or initial cadmium concentration resulted in an increase in cadmium uptake. The maximum biosorption capacity of free and loofa immobilized biomass of Synechococcus sp. was found to be 47.73 and 57.76 mg g⁻¹ biomass respectively. The biosorption equilibrium was well described by Langmuir adsorption isotherm model. The biosorbed cadmium was desorbed by washing the immobilized biomass with dilute HCl (0.1 M) and desorbed biomass was reused in five biosorption–desorption cycles without an apparent decrease in its metal biosorption capacity. The metal removing capacity of loofa immobilized biomass was also tested in a continuous flow fixed-bed column bioreactor and was found to be highly effective in removing cadmium from aqueous solution. The results suggested that the loofa sponge-immobilized biomass of Synechococcus sp. could be used as a biosorbent for an efficient removal of heavy metal ions from aqueous solution.     

Zn2+ biosorption by Oscillatoria anguistissima

Oscillatoria anguistissima showed a very high capacity for Zn²⁺ biosorption (641 mg g⁻¹ dry biomass at a residual concentration of 129·2 ppm) from solution and was comparable to the commmercial ion-exchange resin IRA-400C. Zn²⁺ biosorption was rapid, pH dependent and temperature independent phenomenon. Zn²⁺ adsorption followed both Langmuir and Freundlich models. The specific uptake (mg g⁻¹ dry biomass) of metal decreased with increase in biomass concentration. Pretreatment of biomass did not significantly affect the biosorption capacity of O. anguistissima. The biosorption of zinc by O. anguistissima was an ion-exchange phenomenon as a large concentration of magnesium ions were released during zinc adsorption. The zinc bound to the biomass could be effectively stripped using EDTA (10 mM) and the biomass was effectively used for multiple sorption–desorption cycles with in-between charging of the biomass with tap water washings. The native biomass could also efficiently remove zinc from effluents obtained from Indian mining industries.     

An improved method for production of silica from rice hull ash

Biosorption of monovalent ions Na+ and K+, by deactivated protonated yeast (Saccharomyces cerevisiae) at controlled pH, was compared with biosorption of divalent ions Ca2+ and Mg2+ to help to understand the underlying bindingmechanisms. The adsorption for monovalent ions was accompanied by H+ release. Divalent ions were sorbed by proton displacement, and also an additional mode not accompanied by release of H+. The sorption uptake of both monovalent and divalent metal ions increased with pH in the range 3-7 peaking at 6.75. Equilibrium sorption isotherms at pH = 6.75 showed that the totalmaximum biosorptive capacity for metal ions decreased in the following order: Ca > Mg > Na > or = K.     

Biosorption of lead(II), cadmium(II), copper(II) and nickel(II) by anaerobic granular biomass

Biosorption is potentially an attractive technology for treatment of wastewater for retaining heavy metals from dilute solutions. This study investigated the feasibility of anaerobic granules as a novel type of biosorbent, for lead, copper, cadmium, and nickel removal from aqueous solutions. Anaerobic sludge supplied from a wastewater treatment plant in the province of Quebec was used. Anaerobic granules are microbial aggregates with a strong, compact and porous structure and excellent settling ability. After treatment of the biomass with Ca ions, the cation exchange capacity of the biomass was approximately 111 meq/100 g of biomass dry weight which is comparable to the metal binding capacities of commercial ion exchange resins. This work investigated the equilibrium, batch dynamics for the biosorption process. Binding capacity experiments using viable biomass revealed a higher value than those for nonviable biomass. Binding capacity experiments using non-viable biomass treated with Ca revealed a high value of metals uptake. The solution initial pH value affected metal sorption. Over the pH range of 4.0-5.5, pH-related effects were not significant. Meanwhile, at lower pH values the uptake capacity decreased. Time dependency experiments for the metal ions uptake showed that adsorption equilibrium was reached almost 30 min after metal addition. It was found that the q(max) for Pb2+, Cd2+, Cu2+, and Ni2+ ions, were 255, 60, 55, and 26 mg/g respectively (1.23, 0.53, 0.87, and 0.44 mmol/g respectively). The data pertaining to the sorption dependence upon metal ion concentration could be fitted to a Langmiur isotherm model. Based on the results, the anaerobic granules treated with Ca appear to be a promising biosorbent for removal of heavy metals from wastewater due to its optimal uptake of heavy metals, its particulate shape, compact porous structure, excellent settling ability, and its high mechanical strength.     

Equilibrium and kinetic studies on biosorption potential of charophyte biomass to remove heavy metals from synthetic metal solution and municipal wastewater

The risk of heavy metal contamination in domestic water causes serious health and environmental problems. Biosorption has been considered as an efficient and alternative way for treatment of heavy metal–contaminated wastewater. The potentials of dried charophytes, Chara aculeolata and Nitella opaca, to biosorb lead (Pb), cadmium (Cd), and zinc (Zn) from synthetic solutions and municipal wastewater were investigated. The efficiency of metal removal was studied under varied conditions in different sorbent dosages, pH, and contact times. Biosorption isotherm and kinetics were used to clarify heavy metal preference and biosorption mechanism. C. aculeolata and N. opaca performed well in the biosorption of all three metal ions, with preference towards Pb, followed by Cd and Zn, in the single-metal solutions. Pb adsorption onto algal biomass followed first-order rate kinetics (N. opaca) and intraparticle diffusion (C. aculeolata and N. opaca). These results indicated physical adsorption process between Pb ions and both algal biomasses. Cd and Zn biosorption kinetics fitted the second-order rate model, indicating chemical adsorption between metal ions and both algae. The experimental data of three-metal biosorption fitted well to Langmuir isotherm model, suggesting that the metal ion adsorption occurred in a monolayer pattern on a homogeneous surface. C. aculeolata exhibited slightly higher maximum uptake of Pb, Cd, and Zn (105.3 mgPb/g, 23.0 mgCd/g, 15.2 mgZn/g) than did N. opaca (104.2 mgPb/g, 20.5 mgCd/g, 13.4 mgZn/g). In multi-metal solutions, antagonistic effect by metal competition was observed. The ability of charophytes to remove Pb and Zn was high in real municipal water (81–100%). Thus, the charophytic biomass may be considered for the treatment of metal contamination in municipal wastewater.     

Equilibrium isotherm studies for the uptake of cadmium and lead ions onto sugar beet pulp

The adsorption of Cd2+ and Pb2+ on sugar beet pulp (SBP), a low-cost material, has been studied. In the present work, the abilities of native (SBP) to remove cadmium (Cd2+) and lead (Pb2+) ions from aqueous solutions were compared. The (SBP) an industrial by product and solid waste of sugar industry were used for the removal of Cd2+ and Pb2+ ions from aqueous water. Batch adsorption studies were carried out to examine the influence of various parameters such as initial pH, adsorbent dose, initial metal ion concentration, and time on uptake. The sorption process was relatively fast and equilibrium was reached after about 70 min of contact. As much as 70-75% removal of Cd2+ and Pb2+ ions for (SBP) are possible in about 70 min, respectively, under the batch test conditions. Uptake of Cd2+ and Pb2+ ions on (SBP) showed a pH-dependent profile. The overall uptake for the (SBP) is at a maximum at pH 5.3 and gives up to 46.1 mg g(-1) for Cd2+ and at pH 5.0 and gives 43.5 mg g(-1) for Pb2+ for (SBP), which seems to be removed exclusively by ion exchange, physical sorption and chelation. A dose of 8 gL(-1) was sufficient for the optimum removal of both the metal ions. The Freundlich represented the sorption data for (SBP). In the presence of 0.1M NaNO3 the level of metal ion uptake was found to reach its maximum value very rapidly with the speed increasing both with the (SPB) concentration and with increasing initial pH of the suspension. The reversibility of the process was investigated. The desorption of Cd2+ and Pb2+ ions which were previously deposited on the (SBP) back into the deionised water was observed only in acidic pH values during one day study period and was generally rather low. The extent of adsorption for both metals increased along with an increase of the (SBP) dosage. (SBP), which is cheap and highly selective, therefore seems to be a promising substrate to entrap heavy metals in aqueous solutions.