The effect of storage and active ingredient properties on the drug release profile of poly(ethylene oxide) matrix tablets

Different molecular weight forms of poly(ethylene oxide) can be used successfully in controlled release drug delivery due to their excellent matrix forming properties. Drug release of these materials follows nearly zero order kinetics, and is mainly governed by polymer swelling and erosion and diffusion of drug molecules. Because of its partly amorphous structure, poly(ethylene oxide) undergoes structural changes caused by elevated temperature and relative humidity of the storage medium resulting in an increased drug release. This physical process can be highly influenced by the structure of different drug molecules, such as polymer-binding ability and hydration tendency. These properties of two basic drugs embedded into poly(ethylene oxide) matrices were characterized by molecular modelling and an attempt was made to reveal their effect on the change of drug release stability, a prerequisite of the marketing authorization of dosage forms. The findings suggest that both the hydration properties of the active ingredient and the molecular weight of the polymer influence the effect of physical ageing of poly(ethylene oxide) on the drug release properties of the matrix.     

Review physical and chemical aspects of stabilization of compounds in silk

The challenge of stabilization of small molecules and proteins has received considerable interest. The biological activity of small molecules can be lost as a consequence of chemical modifications, while protein activity may be lost due to chemical or structural degradation, such as a change in macromolecular conformation or aggregation. In these cases, stabilization is required to preserve therapeutic and bioactivity efficacy and safety. In addition to use in therapeutic applications, strategies to stabilize small molecules and proteins also have applications in industrial processes, diagnostics, and consumer products like food and cosmetics. Traditionally, therapeutic drug formulation efforts have focused on maintaining stability during product preparation and storage. However, with growing interest in the fields of encapsulation, tissue engineering, and controlled release drug delivery systems, new stabilization challenges are being addressed; the compounds or protein of interest must be stabilized during: (1) fabrication of the protein or small molecule-loaded carrier, (2) device storage, and (3) for the duration of intended release needs in vitro or in vivo. We review common mechanisms of compound degradation for small molecules and proteins during biomaterial preparation (including tissue engineering scaffolds and drug delivery systems), storage, and in vivo implantation. We also review the physical and chemical aspects of polymer-based stabilization approaches, with a particular focus on the stabilizing properties of silk fibroin biomaterials.     

The enzymatic degradation and swelling properties of chitosan matrices with different degrees of N-acetylation

In the design of chitosan-based drug delivery systems and implantable scaffolds, the biodegradation rate of the chitosan matrix represents a promising strategy for drug delivery and the function of carriers. In this study, we have investigated the degradation of chitosan with different degrees of N-acetylation, with respect to weight loss, water absorption, swelling behavior, molecular weight loss of bulk materials, and reducing sugar content in the media. Chitosan matrices were prepared by compression molding. The results revealed that the initial degradation rate, equilibrium water absorption, and swelling degree increased with decreasing degree of deacetylation (DD) and a dramatic rise began as DD of the chitosan matrix decreased to 62.4%. Chitosan matrices with DD of 52.6%, 56.1%, and 62.4% had the weight half-life of 9.8, 27.3, and more than 56 days, respectively, and the weight half-life of average molecular weight 8.4, 8.8, and 20.0 days, respectively. For chitosan matrices with DD of 71.7%, 81.7%, and 93.5%, both types of half-life exceeded 84 days because of the much slower degradation rate. The dimension of chitosan matrices during degradation was determined by the process of swelling and degradation. These findings may help to design chitosan-based biomedical materials with predetermined degradation timed from several days to months and proper swelling behaviors.     

Extrasynaptic transmission and the diffusion parameters of the extracellular space

Extrasynaptic volume transmission, mediated by the diffusion of neuroactive substances in the extracellular space (ECS), plays an important role in short- and long-distance communication between nerve cells. The ability of a substance to reach extrasynaptic high-affinity receptors via diffusion depends on the ECS diffusion parameters, ECS volume fraction alpha (alpha=ECS volume/total tissue volume) and tortuosity lambda (lambda2=free/apparent diffusion coefficient), which reflects the presence of diffusion barriers represented by, e.g., fine astrocytic processes or extracellular matrix molecules. These barriers channel the migration of molecules in the ECS, so that diffusion may be facilitated in a certain direction, i.e. anisotropic. The diffusion parameters alpha and lambda differ in various brain regions, and diffusion in the CNS is therefore inhomogeneous. Changes in diffusion parameters have been found in many physiological and pathological states, such as development and aging, neuronal activity, lactation, ischemia, brain injury, degenerative diseases, tumor growth and others, in which cell swelling, glial remodeling and extracellular matrix changes are key factors influencing diffusion. Changes in ECS volume, tortuosity and anisotropy significantly affect the accumulation and diffusion of neuroactive substances and thus extrasynaptic transmission, neuron-glia communication, mediator "spillover" and synaptic crosstalk as well as, cell migration. The various changes occurring during pathological states can be important for diagnosis, drug delivery and treatment.     

Astrocytes and extracellular matrix in extrasynaptic volume transmission

Volume transmission is a form of intercellular communication that does not require synapses; it is based on the diffusion of neuroactive substances across the brain extracellular space (ECS) and their binding to extrasynaptic high-affinity receptors on neurons or glia. Extracellular diffusion is restricted by the limited volume of the ECS, which is described by the ECS volume fraction α, and the presence of diffusion barriers, reflected by tortuosity λ, that are created, for example, by fine astrocytic processes or extracellular matrix (ECM) molecules. Organized astrocytic processes, ECM scaffolds or myelin sheets channel the extracellular diffusion so that it is facilitated in a certain direction, i.e. anisotropic. The diffusion properties of the ECS are profoundly influenced by various processes such as the swelling and morphological rebuilding of astrocytes during either transient or persisting physiological or pathological states, or the remodelling of the ECM in tumorous or epileptogenic tissue, during Alzheimer''s disease, after enzymatic treatment or in transgenic animals. The changing diffusion properties of the ECM influence neuron–glia interaction, learning abilities, the extent of neuronal damage and even cell migration. From a clinical point of view, diffusion parameter changes occurring during pathological states could be important for diagnosis, drug delivery and treatment.     

Radiation crosslinked psyllium and polyacrylic acid based hydrogels for use in colon specific drug delivery

In order to utilize the psyllium husk, a medicinally important natural polysaccharide, to develop the hydrogels meant for the drug delivery, we have prepared psyllium and polyacrylic acid based polymeric networks by radiation-induced crosslinked copolymerization. Polymeric networks (hydrogels) thus formed were characterized with SEMs, FTIR and swelling studies. Swelling behavior of the hydrogels was studied as a function of monomer concentration in the hydrogels and temperature, pH and [NaCl] of the swelling medium. This paper discusses the swelling kinetics of the hydrogels and release dynamics of anticancer model drug 5-fluorouracil from the hydrogels for the evaluation of swelling and drug release mechanisms. It has been observed from the release dynamics of drug that diffusion exponent ‘n’ have 0.7, 0.8 and 0.7 values and gel characteristics constant ‘k’ have 9.13 × 10⁻³, 6.22 × 10⁻³ and 9.01 × 10⁻³ values for the release of 5-fluorouracil, respectively, in distilled water, pH 2.2 buffer and pH 7.4 buffer. The values of the diffusion exponent show that the release of drug from drug-loaded hydrogels has occurred through Non-Fickian diffusion mechanism. It has also been observed from the swelling and release of drug in the different pH buffer that the polymer matrix is pH responsive and can be exploited for the delivery of anticancer drug to the colon.     

Characteristics of compounds that cross the blood-brain barrier

Substances cross the blood-brain barrier (BBB) by a variety of mechanisms. These include transmembrane diffusion, saturable transporters, adsorptive endocytosis, and the extracellular pathways. Here, we focus on the chief characteristics of two mechanisms especially important in drug delivery: transmembrane diffusion and transporters. Transmembrane diffusion is non-saturable and depends, on first analysis, on the physicochemical characteristics of the substance. However, brain-to-blood efflux systems, enzymatic activity, plasma protein binding, and cerebral blood flow can greatly alter the amount of the substance crossing the BBB. Transport systems increase uptake of ligands by roughly 10-fold and are modified by physiological events and disease states. Most drugs in clinical use to date are small, lipid soluble molecules that cross the BBB by transmembrane diffusion. However, many drug delivery strategies in development target peptides, regulatory proteins, oligonucleotides, glycoproteins, and enzymes for which transporters have been described in recent years. We discuss two examples of drug delivery for newly discovered transporters: that for phosphorothioate oligonucleotides and for enzymes.     

Drug loading into and drug release from pH- and temperature-responsive cylindrical hydrogels

Hydrogels that undergo deformation upon appropriate changes in pH or temperature have considerable promise as drug delivery vehicles. Drug uptake in swelling and nonswelling cylindrical hydrogels and drug release from these into a target fluid are investigated here. A mathematical model for hydrogel-solution composite, a composite of a distributed parameter system (cylindrical hydrogel) and a lumped parameter system (surrounding solution), is developed. The polymer network displacement in a swelling/deswelling hydrogel is described by a stress diffusion coupling model. The analytical solution for network displacement is used to predict solvent intake by swelling hydrogels, solvent efflux from deswelling hydrogels, and changes in pressure, porosity, and effective drug diffusivity. These in turn influence drug uptake during and after hydrogel swelling and drug release from hydrogel during and after deswelling. Numerical results illustrate benefits of hydrogel swelling for drug loading and merits of different modes of drug release. Drug uptake and drug release by temperature-responsive hydrogels are compared with those by hydrogels not subject to deformation.     

IPNs based on chitosan with NVP and NVP/HEMA synthesised through photoinitiator-free photopolymerisation technique for biomedical applications

Biocompatible interpenetration polymeric network (IPN) hydrogels based on chitosan with N-vinylpyrrolidinone (NVP) as well as its copolymer with 2-hydroxymethyl methacrylate (HEMA) were synthesised using the photopolymerisation technique without the inclusion of any photoinitiator or crosslinking agent. These hydrogels were characterised using the Fourier-transform infrared spectroscopy (FTIR) technique. Equilibrium swelling of these hydrogels was performed in Milli-Q water and drug release studies were carried out using theophylline as the model drug. These tests showed that the IPN comprised of chitosan and NVP with a very small amount of N-hydroxymethyl maleimide (HMMI) included exhibited higher swelling abilities and fast drug release rates than the IPN which contained chitosan, NVP and HEMA. Kinetic studies of water diffusion into these hydrogels and drug release revealed that with the exception of the IPN with HEMA incorporated, the other hydrogels did not adhere to the Fickian diffusion model. These hydrogels were tested for their biocompatibility with human epidermal keratinocyte cells (HaCaT). A positive cell growth as evidenced by the 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyl tetrazolium bromide (MTT) cell proliferation assay indicated that these hydrogels are non-toxic to human keratinocytes and can be potentially used as biomaterials for biomedical applications.     

Effect of cell arrangement and interstitial volume fraction on the diffusivity of monoclonal antibodies in tissue.

We present theoretical calculations relating the effective diffusivity of monoclonal antibodies in tissue (Deff) to the actual diffusivity in the interstitium (Dint) and the interstitial volume fraction phi. Measured diffusivity values are effective values, deduced from concentration profiles with the tissue treated as a continuum. By using homogenization theory, the ratio Deff/Dint is calculated for a range of interstitial volume fractions from 10 to 65%. It is assumed that only diffusion in the interstitial spaces between cells contributes to the effective diffusivity. The geometries considered have cuboidal cells arranged periodically, with uniform gaps between cells. Deff/Dint is found to generally be between (2/3) phi and phi for these geometries. In general, the pathways for diffusion between cells are not straight. The effect of winding pathways on Deff/Dint is examined by varying the arrangement of the cells, and found to be slight. Also, the estimates of Deff/Dint are shown to be insensitive to typical nonuniformities in the widths of gaps between cells. From our calculations and from published experimental measurements of the effective diffusivity of an IgG polyclonal antibody both in water and in tumor tissue, we deduce that the diffusivity of this molecule in the interstitium is one-tenth to one-twentieth its diffusivity in water. We also conclude that exclusion of molecules from cells (an effect independent of molecular weight) contributes as much as interstitial hindrance to the reduction of effective diffusivity, for small interstitial volume fractions (around 20%). This suggests that the increase in the rate of delivery to tissues resulting from the use of smaller molecular-weight molecules (such as antibody fragments or bifunctional antibodies) may be less than expected.     

Radiation crosslinking polymerization of sterculia polysaccharide-PVA-PVP for making hydrogel wound dressings

The present study deals with the modification of sterculia gum by PVA-PVP through radiation crosslinking, to develop the hydrogels meant for the delivery of antimicrobial agent to the wounds. The hydrogels were characterized by SEM, FTIR, TGA and swelling studies. For the evaluation of swelling and drug release mechanism, the swelling kinetics and in vitro release dynamics of model drug from this matrix have been studied respectively in the solution of different pHs and simulated wound fluid. After 24h swelling per gram of the hydrogel has taken (17.03±0.19)g of simulated wound fluid and has released (0.230±0.01)mg of drug in the simulated fluid. The release of drug in simulated fluids occurred through non-Fickian diffusion mechanism.     

Evaluation of the Impacts of Formulation Variables and Excipients on the Drug Release Dynamics of a Polyamide 6,10-Based Monolithic Matrix Using Mathematical Tools

Drug release from hydrophilic matrices is regulated mainly by polymeric erosion, disentanglement, dissolution, swelling front movement, drug dissolution and diffusion through the polymeric matrix. These processes depend upon the interaction between the dissolution media, polymeric matrix and drug molecules, which can be significantly influenced by formulation variables and excipients. This study utilized mathematical parameters to evaluate the impacts of selected formulation variables and various excipients on the release performance of hydrophilic polyamide 6,10 (PA 6,10) monolithic matrix. Amitriptyline HCl and theophylline were employed as the high and low solubility model drugs, respectively. The incorporation of different excipient concentrations and changes in formulation components influenced the drug release dynamics as evidenced by computed mathematical quantities (t _x%, MDT _x%, f ₁, f ₂, k ₁, k ₂, and К _F). The effects of excipients on drug release from the PA 6,10 monolithic matrix was further elucidated using static lattice atomistic simulations wherein the component energy refinements corroborates the in vitro and in silico experimental data. Consequently, the feasibility of modulating release kinetics of drug molecules from the novel PA 6,10 monolithic matrix was well suggested.     

A new technique for measurement of water permeability of stomatous cuticular membranes isolated from Hedera helix leaves

Transpiration of cuticular membranes isolated from the lower stomatous surface of Hedera helix (ivy) leaves was measured using a novel approach which allowed a distinction to be made between gas phase diffusion (through stomatal pores) and solid phase diffusion (transport through the polymer matrix membrane and cuticular waxes) of water molecules. This approach is based on the principle that the diffusivity of water vapour in the gas phase can be manipulated by using different gases (helium, nitrogen, or carbon dioxide) while diffusivity of water in the solid phase is not affected. This approach allowed the flow of water across stomatal pores ('stomatal transpiration') to be calculated separately from the flow across the cuticle (cuticular transpiration) on the stomatous leaf surface. As expected, water flux across the cuticle isolated from the astomatous leaf surface was not affected by the gas composition since there are no gas-filled pores. Resistance to flux of water through the solid cuticle on the stomatous leaf surface was about 11 times lower than cuticular resistance on the astomatous leaf surface, indicating pronounced differences in barrier properties between cuticles isolated from both leaf surfaces. In order to check whether this difference in resistance was due to different barrier properties of cuticular waxes on both leaf sides, mobility of 14C-labelled 2,4-dichlorophenoxy-butyric acid 14C-2,4-DB) in reconstituted cuticular wax isolated from both leaf surfaces was measured separately. However, mobility of 14C-2,4-DB in reconstituted wax isolated from the lower leaf surface was 2.6 times lower compared with the upper leaf side. The significantly higher permeability of the ivy cuticle on the lower stomatous leaf surface compared with the astomatous surface might result from lateral heterogeneity in permeability of the cuticle covering normal epidermal cells compared with the cuticle covering the stomatal cell surface.     

Investigation of drug release and matrix degradation of electrospun poly(DL-lactide) fibers with paracetanol inoculation

This study was aimed at assessing the potential use of electrospun fibers as drug delivery vehicles with focus on the different diameters and drug contents to control drug release and polymer fiber degradation. A drug-loaded solvent-casting polymer film was made with an average thickness of 100 microm for comparative purposes. DSC analysis indicated that electrospun fibers had a lower T(g) but higher transition enthalpy than solvent-casting polymer film due to the inner stress and high degree of alignment and orientation of polymer chains caused by the electrospinning process. Inoculation of paracetanol led to a further slight decrease in the T(g) and transition enthalpy. An in vitro drug release study showed that a pronounced burst release or steady release phase was initially observed followed by a plateau or gradual release during the rest time. Fibers with a larger diameter exhibited a longer period of nearly zero order release, and higher drug encapsulation led to a more significant burst release after incubation. In vitro degradation showed that the smaller diameter and higher drug entrapment led to more significant changes of morphologies. The electrospun fiber mat showed almost no molecular weight reduction, but mass loss was observed for fibers with small and medium size, which was characterized with surface erosion and inconsistent with the ordinarily polymer degrading form. Further wetting behavior analysis showed that the high water repellent property of electrospun fibers led to much slower water penetration into the fiber mat, which may contribute to the degradation profiles of surface erosion. The specific degradation profile and adjustable drug release behaviors by variation of fiber characteristics made the electrospun nonwoven mat a potential drug delivery system rather than polymer films and particles.     

How to predict diffusion of medium-sized molecules in polymer matrices. From atomistic to coarse grain simulations

The normal diffusion regime of many small and medium-sized molecules occurs on a time scale that is too long to be studied by atomistic simulations. Coarse-grained (CG) molecular simulations allow to investigate length and time scales that are orders of magnitude larger compared to classical molecular dynamics simulations, hence providing a valuable approach to span time and length scales where normal diffusion occurs. Here we develop a novel multi-scale method for the prediction of diffusivity in polymer matrices which combines classical and CG molecular simulations. We applied an atomistic-based method in order to parameterize the CG MARTINI force field, providing an extension for the study of diffusion behavior of penetrant molecules in polymer matrices. As a case study, we found the parameters for benzene (as medium sized penetrant molecule whose diffusivity cannot be determined through atomistic models) and Poly (vinyl alcohol) (PVA) as polymer matrix. We validated our extended MARTINI force field determining the self diffusion coefficient of benzene (2.27·10⁻⁹ m² s⁻¹) and the diffusion coefficient of benzene in PVA (0.263·10⁻¹² m² s⁻¹). The obtained diffusion coefficients are in remarkable agreement with experimental data (2.20·10⁻⁹ m² s⁻¹ and 0.25·10⁻¹² m² s⁻¹, respectively). We believe that this method can extend the application range of computational modeling, providing modeling tools to study the diffusion of larger molecules and complex polymeric materials.     

Tissue response and biomaterial integration: the efficacy of in vitro methods

Implantation involves tissue trauma, which evokes an inflammatory response, coupled to a wound healing reaction, involving angiogenesis, fibroblast activation and matrix remodelling. Until now the type and extent of such reactions to give optimal integration of various biomaterials are practically unknown. Three principal fields of research can yield useful data to understand these phenomena better: studies on explanted biomaterials, animal models and relevant in vitro techniques. This paper will present examples of the latter field and the application of endothelial cell (EC) culture systems to study the effects of important tissue (e.g. pro-inflammatory cytokines, chemokines) and material (e.g. metal ions, particulate debris) factors on the regulation of the inflammatory and angiogenic response. A central feature is the use of microvascular endothelial cells (MEC), which can be used in both 2-and 3-dimensional (3-D) assays. We have also used genetic manipulation to develop a permanent MEC line from the human lung (HPMEC-ST1), which is being tested for its suitability to study cell-biomaterial interactions. In addition, suitable in vitro techniques are being developed in order to investigate drug delivery systems (DDS). Of particular interest is the targeting of the central nervous system, our approach being to establish a human model of the blood-brain barrier (BBB). A mainstay of our scientific philosophy is that such in vitro methods can make an important contribution to understanding biological reactions at the tissue-biomaterial interface and thus further a causal approach to tissue engineering (TE) and drug delivery applications.     

Modelling intravascular delivery from drug-eluting stents with biodurable coating: investigation of anisotropic vascular drug diffusivity and arterial drug distribution

In-stent restenosis occurs in coronary arteries after implantation of drug-eluting stents with non-uniform restenosis thickness distribution in the artery cross section. Knowledge of the spatio-temporal drug uptake in the arterial wall is useful for investigating restenosis growth but may often be very expensive/difficult to acquire experimentally. In this study, local delivery of a hydrophobic drug from a drug-eluting stent implanted in a coronary artery is mathematically modelled to investigate the drug release and spatio-temporal drug distribution in the arterial wall. The model integrates drug diffusion in the coating and drug diffusion with reversible binding in the arterial wall. The model is solved by the finite volume method for both high and low drug loadings relative to its solubility in the stent coating with varied isotropic–anisotropic vascular drug diffusivities. Drug release profiles in the coating are observed to depend not only on the coating drug diffusivity but also on the properties of the surrounding arterial wall. Time dependencies of the spatially averaged free- and bound-drug levels in the arterial wall on the coating and vascular drug diffusivities are discussed. Anisotropic vascular drug diffusivities result in slightly different average drug levels in the arterial wall but with very different spatial distributions. Higher circumferential vascular diffusivity results in more uniform drug loading in the upper layers and is potentially beneficial in reducing in-stent restenosis. An analytical expression is derived which can be used to determine regions in the arterial with higher free-drug concentration than bound-drug concentration.     

NMR imaging of high-amylose starch tablets. 1. Swelling and water uptake

Pharmaceutical tablets made of modified high-amylose starch have a hydrophilic polymer matrix into which water can penetrate with time to form a hydrogel. Nuclear magnetic resonance imaging was used to study the water penetration and the swelling of the matrix of these tablets. The tablets immersed in water were imaged at different time intervals on a 300 MHz NMR spectrometer. Radial images show clearly the swelling of the tablets and the water concentration profile. The rate constants for water diffusion and the tablet swelling were extracted from the experimental data. The water diffusion process was found to follow case II kinetics at 25 degrees C. NMR imaging also provided spin density profiles of the water penetrating inside the tablets.     

Synthesis, characterization and swelling studies of pH responsive psyllium and methacrylamide based hydrogels for the use in colon specific drug delivery

In order to utilize the psyllium husk a medicinally important natural polysaccharide and to develop the novel hydrogels meant for the colon specific drug delivery, we have prepared psyllium and methacrylamide based polymeric networks by using N,N′-methylenebisacrylamide (NN-MBAAm) as crosslinker and ammonium persulfate (APS) as initiator. To study various structural aspects of the polymeric networks thus formed psy-cl-poly(MAAm), these were characterized with SEMs, FTIR, TGA and swelling studies. The swelling studies of networks were carried out as a function of time, temperature, pH and [NaCl]. Equilibrium swelling has been observed to depend on both composition of the polymer and nature of swelling medium. Maximum percent swelling 1262 was observed for the polymeric network prepared with 19.45 × 10⁻³ mol/L of [NN-MBAAm] at 40 °C in 0.5 M NaOH solution. This article also discusses the release dynamics of tetracycline hydrochloride from the hydrogels, for the evaluation of the drug release mechanism and diffusion coefficients of drug from the polymer matrix. The effect of pH on the release pattern of tetracycline hydrochloride has been studied by varying the pH of the release medium. It has been observed from the release dynamics of drug from the hydrogels that the diffusion exponent ‘n’ have 0.477, 0.423 and 0.427 values and gel characteristic constant ‘k’ have 5.07 × 10⁻², 6.34 × 10⁻² and 6.38 × 10⁻² values, respectively, in distilled water, pH 2.2 buffer and pH 7.4 buffer solution. The values the ‘n’ indicated that the Fickian type diffusion mechanism occurred for the release of tetracycline hydrochloride from drug loaded psy-cl-poly(MAAm) polymers in different release mediums. In Fickian type diffusion mechanism, the rate of polymer chain relaxation is more as compare to the rate of drug diffusion from these hydrogels and release behavior follows Fick’s law of diffusion. In each release medium, the values of the initial diffusion coefficient ‘D_i’ for the release of tetracycline hydrochloride was higher than the values of late time diffusion coefficient ‘D_L’ indicating that in the start, the diffusion of drug from the polymeric matrix was faster as compare to the latter stages.     

Diffusion of Exchangeable Water in Cortical Bone Studied by Nuclear Magnetic Resonance

The rate-limiting step in the delivery of nutrients to osteocytes and the removal of cellular waste products is likely diffusion. The transport of osteoid water across the mineralized matrix of bone was studied by proton nuclear magnetic resonance spectroscopy and imaging by measuring the diffusion fluxes of tissue water in cortical bone specimens from the midshaft of rabbit tibiae immersed in deuterium oxide. From the diffusion coefficient (D_a = (7.8 ± 1.5) × 10⁻⁷ cm²/s) measured at 40°C (close to physiological temperature), it can be inferred that diffusive transport of small molecules from the bone vascular system to the osteocytes occurs within minutes. The activation energy for water diffusion, calculated from D_a measured at four different temperatures, suggests that the interactions between water molecules and matrix pores present significant energy barriers to diffusion. The spatially resolved profile of D_a perpendicular to the cortical surface of the tibia, obtained using a finite difference model, indicates that diffusion rates are higher close to the endosteal and periosteal surfaces, decreasing toward the center of the cortex. Finally, the data reveal a water component (∼30%) diffusing four orders of magnitude more slowly, which is ascribed to water tightly bound to the organic matrix and mineral phase.