Synergistic enhancement of protoplast growth by oxygenated perfluorocarbon and Pluronic F-68

Summary Cell suspension-derived protoplasts of albino Petunia hybrida were grown for 10 d at the interface between aqueous culture medium (KM8P) and an oxygenated (10 mbar for 15 min) perfluorocarbon liquid, perfluorodecalin. Protoplasts synthesised new cell walls and divided normally at the perfluorodecalin/culture medium interface, with a mean viability after 10 d of > 92.0%. The mean plating efficiency of protoplasts was elevated by 37% (P<0.05) following culture at the perfluorodecalin/medium interface, but was unaltered by perfluorodecalin or oxygen separately. The mean plating efficiency of protoplasts cultured at the interface was further increased to a maximium of 52% above control, in the presence of oxygenated perfluorodecalin and KM8P medium supplemented with the non-ionic, co-polymer surfactant, Pluronic F-68 at 0.01% (w/v). These findings demonstrate the effectiveness of oxygenated perfluorodecalin for promoting protoplast growth, by facilitating oxygen delivery. The finding that Pluronic F-68 further increased the plating efficiency of protoplasts cultured at the perfluorocarbon/aqueous interface suggests that these agents improve growth through separate, but cumulative, mechanisms.Abbreviations ATP adenosine triphosphate - PFCs perfluorochemicals - STP standard temperature and pressure     

Effects of Pluronic F-68 on callus growth and protoplast plating efficiency of Solanum dulcamara

Summary The effects of the non-ionic surfactant, Pluronic F-68, on the growth of callus and protoplasts from Solanum dulcamara L. have been studied. Growth of callus was stimulated by addition of 0.1% (w/v) commercial grade Pluronic to culture medium, whereas lower concentrations (0.01% w/v) had no corresponding effect. In contrast, higher concentrations (1.0% w/v) of Pluronic inhibited callus growth. The mean plating efficiency of protoplasts grown at different densities (15 days after plating) was increased up to 26% following culture with 0.1% (w/v) Pluronic, while 0.01% (w/v) Pluronic was ineffective. Mean protoplast plating efficiency decreased by up to 32% following culture with 1.0% (w/v) Pluronic.     

Strategies for promoting division of cultured plant protoplasts: synergistic beneficial effects of haemoglobin (Erythrogen) and Pluronic F-68

Novel approaches, involving supplementation of aqueous culture medium with haemoglobin solution (Erythrogen), in the presence or absence of the copolymer surfactant, Pluronic F-68, have been evaluated to facilitate cellular oxygen availability to promote mitotic division. Cell-suspension-derived protoplasts of albino Petunia hybrida cv. Comanche were cultured for up to 45 days in KM8P medium containing 1:50–1:500 (vol:vol) Erythrogen. The mean initial protoplast plating efficiency after 9 days with 1:50 Erythrogen (18.5%) was significantly greater (P<0.05) than in untreated controls (11.3%). Supplementation of culture medium with 1:50 Erythrogen, together with 0.01% (wt/vol) Pluronic F-68, increased the mean plating efficiency after 9 days (24.4%) by 92% (P<0.05) over the control (12.7%). These treatments also produced increases in biomass of protoplast-derived cells up to 2.5-fold greater than control (P<0.01) over 80 days. Gassing the medium, containing 1:50 Erythrogen, with carbon monoxide abolished the increase in plating efficiency. There was no additional benefit of gassing Erythrogen-supplemented medium with 100% oxygen. The synergistic, beneficial effect of Erythrogen and Pluronic F-68 on protoplast division has implications for plant biotechnology utilising protoplasts. Received: 24 May 1996 / Revision received: 12 July 1996 / Accepted: 15 August 1996     

Pluronic F-68 Stimulates Growth of Solanum dulcamara in Culture

The effects have been studied of the non-ionic surfactant, PluronicF-68, on the growth of transformed roots, callus and protoplastsof Solanum dulcamara L. Root growth was stimulated by additionof 0001–005% (w/v) of freshly-prepared, commercial gradePluronic to culture medium, with maximum increases in root freshand dry weights at 001%. Higher concentrations (05–10%w/v) of freshly-prepared Pluronic inhibited growth. A Pluronicfraction, prepared by passage through silica-Amberlite resin,retarded root growth even at concentrations that were stimulatorywith the commercial preparation. Similarly, commercial gradePluronic solutions stored at 4C or 22C for 5 d (‘aged’)also inhibited root growth. Roots grew faster on Pluronic F-68-treatedmembrane rafts compared with growth on commercially-availablerafts; such growth enhancement was comparable to that seen inmedium supplemented with 001% (w/v) freshly-prepared commercialPluronic. Callus growth was also stimulated by the addition of freshly-prepared,commercial grade Pluronic F-68 to medium, with maximum increasesat 01% (w/v); in contrast, 10% (w/v) Pluronic was inhibitoryto callus growth. The mean plating efficiency (15 d after plating)of protoplasts cultured at densities of 01–2010⁵ cm_–3was increased up to 26% by 01% (w/v) Pluronic, while 10% wasinhibitory. Both root and callus soluble carbohydrates and proteinswere increased by exposure to freshly-prepared, commercial Pluronic.Similarly, the specific activities of malate dehydrogenase andacid phosphatase were increased in Pluronic F-68-treated callusand roots. The biotechnological implications of these resultsare discussed in relation to the potential value of non-ionicsurfactants as growth-stimulating additives to plant culturemedia. Key words: Solanum dulcamara, Pluronic F-68, surfactant, transformed roots, callus, protoplasts, malate dehydrogenase, acid phosphatase     

Studies of protoplast culture types and plant regeneration from callusderived protoplasts of Asparagus officinalis L. cv. Lucullus 234

Plating efficiency and colony formation of callus-derived protoplasts of Asparagus officinalis L. cv. Lucullus 234 differed significantly with different protoplast culture media and types of culture. Osmotic conditions and hormone concentrations of liquid media produced the greatest influence on plating efficiency and colony formation in bead culture. Protoplasts grew best in bead culture with a solid modified Kao & Michayluk protoplast culture medium (KM) supplemented with 0.5 mg l^–1 -naphthaleneacetic acid (NAA), 0.5 mg l^–1 2,4-dichlorophenoxyacetic acid (2,4-D), 0.5 mg l^–1 kinetin, and 0.6% agarose (KM6) and a liquid modified KM medium differing from KM6 medium in sugar content, having 0.18 M sucrose and 0.18 M mannitol (A8). An average plating efficiency of 19.1% and colony formation of 15.5% was obtained one week after isolation in bead culture with the KM6 and A8 media. The highest average shoot regeneration of 92.3% was obtained with a Murashige & Skoog medium (MS) containing 0.125 mg l^–1 NAA, 0.125 mg l^–1 2,4-D, 0.25 mg l^–1 6-benzylaminopurine (6-BAP) and 3% sucrose. Plants have been regenerated and transferred to the greenhouse.Abbreviations NAA -naphthaleneacetic acid - 2,4-D 2,4-dichlorophenoxyacetic acid - 6-BAP 6-benzylaminopurine     

Effects of Pluronic F-68 on shoot regeneration from cultured jute cotyledons and on growth of transformed roots

The effects have been studied of the non-ionic surfactant, Pluronic F-68, on the growth in culture of jute (Corchorus capsularis L.) cotyledons with attached petioles, cotyledon explants and transformed roots. Supplementation of culture medium with 0.001–0.5% (w/v) of either commercial grade Pluronic F-68 or a purified fraction prepared by passage through silica gel, stimulated shoot production from the petioles of C. capsularis var. D154 and C134 cotyledons. This effect was most marked in C134, because of the failure of control cotyledons to produce shoots in the absence of Pluronic. Plants regenerated from Pluronic-treated cotyledons were morphologically normal. Growth of transformed roots of C. capsularis var. D154 was stimulated in medium supplemented with commercial grade or purified Pluronic F-68, with maximum increases in both fresh and dry weights with 0.1% (w/v) of the surfactant. Roots cultured in the presence of Pluronic F-68 could be maintained without sub-culture for up to 70 days, whereas roots cultured in the absence of Pluronic required subculture every 7 days, to prevent necrosis. Transformed roots also produced callus in the presence of 0.001–1.0% (w/v) of either commercial grade or purified Pluronic. The biotechnological implications of these results are discussed in relation to the potential value of non-ionic surfactants as growth-stimulating additives to plant culture media.Abbreviations NAA -naphthaleneacetic acid - BA 6-benzyladenine - IAA indole-3-acetic acid - MS Murashige & Skoog (1962)     

Stimulation of murine granulocyte macrophage-colony stimulating factor production by Pluronic F-68 and polyethylene glycol in transgenic Nicotiana tabacum cell culture

Pluronic F-68, PEG 8000, or PEG 20 000 added to cell suspension cultures of transgenic Nicotiana tabacum promoted cell growth and the production of the recombinant murine granulocyte macrophage-colony stimulating factor (mGM-CSF) in a 5-l stirred tank bioreactor. The specific growth rates were enhanced from 0.27 d^–1 to 0.47 d^–1, 0.37 d^–1 and 0.4 d^–1 when Pluronic F-68, PEG 8000, or PEG 20 000 was added, respectively. The maximum cell density was also increased most to 13.6 g l^–1 when Pluronic F-68 was added (11.3 g l^–1 in the control culture). In terms of mGM-CSF production, PEG 8000 gave the greatest stimulation and with 2 g PEG 8000 l^–1, mGM-CSF increased from 1.6 to 6.6 ng ml^–1.     

Foaming and media surfactant effects on the cultivation of animal cells in stirred and sparged bioreactors.

Foam formation and the subsequent cell damage/losses in the foam layer were found to be the major problems affecting cell growth and monoclonal antibody (MAb) production in stirred and sparged bioreactors for both serum-supplemented and serum-free media. Surfactants in the culture media had a profound effect on cell growth by changing both the properties of bubbles and the qualities of foam formed. Comparable cell growth and MAb production in sparged bioreactors and in stirred and surface-aerated control cultures were observed only in Pluronic F-68 containing culture media. In media devoid of Pluronic F-68, cells became more sensitive to direct bubble aeration in the presence of antifoam agent which was used to suppress foam formation. Compared with serum-supplemented medium, more severe cell damage effects were observed in serum-free medium. In addition, serum-free medium devoid of cells was partially degraded under continuous air sparging. The mechanism of this damage effect was not clear. Pluronic F-68 provided protective effect to cells but not to the medium. A theoretical model based on the surface active properties of Pluronic F-68 was proposed to account for its protective effect on cell growth. Optimum media surfactant composition in terms of maximum cell growth and minimum foam formation was proposed for stirred and sparged animal cell bioreactor.     

Evidence of Pluronic F-68 direct interaction with insect cells: impact on shear protection, recombinant protein, and baculovirus production*

Pluronic F-68 has been widely used to protect animal cells from hydrodynamic stress, but its mechanism of action is still debatable. Published evidence indicates that Pluronic F-68 interacts with cells, yet scarce information exists of its effect on recombinant protein and virus production by insect cells. In this work, the effect of Pluronic F-68 on production of recombinant baculovirus and rotavirus protein VP7 was determined. Evidence of Pluronic F-68 direct interaction with Sf-9 insect cells also was obtained. Maximum recombinant VP7 concentration and yield increased 10x, whereas virus production decreased by 20x, in spinner flask cultures with 0.05% (w/v) Pluronic F-68 compared to controls lacking the additive. No differences were observed in media rheology, nor kinetics of growth and infection (as inferred from cell size) between both cultures. Hence, Pluronic F-68 influenced cell physiology independently of its shear protective effect. Cells subjected to a laminar shear rate of 3000 s(-1) for 15 min, without gas/liquid interfaces, were protected by Pluronic F-68 even after its removal from culture medium. Furthermore, the protective action was immediate in vortexed cells. The results shown here indicate that Pluronic F-68 physically interacts with cells in a direct, strong, and stable mode, not only protecting them from hydrodynamic damage, but also modifying their capacity for recombinant protein and virus production.     

Strategies for promoting division of cultured plant protoplasts: Beneficial effects of oxygenated perfluorocarbon

Summary Assessments have been made of physical and chemical options, alone and in combination, for gaseous manipulation of cassava (Manihot esculenta Crantz.) leaf protoplast cultures. Protoplasts were cultured for 25 d in liquid medium at an initial plating density of 4 × 10⁵ ml^–1 overlying (1) agar-solidified medium (control), (2) agar medium under an oxygen-enriched (10 mbar, 1 min) atmosphere, (3) agar medium supplemented with perfluorodecalin (Flutec ^® PP5), or (4) agar medium supplemented with oxygenated (10 mbar, 15 min) perfluorodecalin. Similar experimental treatments were also set up, with glass rods embedded in the agar medium. The mean initial plating efficiency (IPE) of protoplasts following culture with oxygenated perfluorodecalin without glass rods (6.7 ± 0.6%; n = 3) was over 2-fold greater (P < 0.05) than that of control cultures (2.6 ± 0.2%; n = 3). The mean IPE of protoplasts cultured with oxygenated perfluorodecalin in the presence of glass rods (5.8 ± 0.2%; n = 3) was also over 2-fold greater (P < 0.05) than controls. There was no significant difference between the IPE of protoplasts cultured under an increased oxygen atmosphere or with oxygenated perfluorodecalin, irrespective of the presence of glass rods.     

Increased hGM-CSF production and secretion with Pluronic F-68 in transgenic<Emphasis Type="Italic">Nicotiana tabacum</Emphasis> suspension cell cultures

The effects of Pluronic F-68, a nonionic surfactant, on the production and secretion of human granulocyte-macrophage colony-stimulating factor (hGM-CSF) in a transgenicNicotiana tabacum cell suspension culture were investigated in this study. The addition of Pluronic F-68 was shown to extend cell survival in the stationary phase, but had no influence on effective initial cell growth. With regard to production, it increased the level of extracellular hGM-CSF two-fold. This may be attributable not only to the enhanced expression level, but also to the improved permeability of the cell membrane due to the interaction between Pluronic F-68 and the cell membrane and cell wall. The effect of Pluronic F-68 on the production and secretion of hGM-CSF in a bioreactor was also evaluated. hGM-CSF production in the bioreactor after the addition of Pluronic F-68 proved more effective than in flask cultures.     

Protoplast culture and paclitaxel production by Taxus yunnanensis

Viable protoplasts of Taxus yunnanensis were isolated from friable, light yellow callus. Protoplast yield was dependent on callus age, with a maximum from 20-day-old callus. Protoplasts were induced to undergo sustained divisions and to form cell colonies when cultured in medium consisting of B5 salts, KM vitamin and organic components, 0.45 M fructose, 3.0 mg l^-1 2,4-dichlorophenoxyacetic acid and 0.1 mg l^-1 kinetin. The planting density was 2.5–3.0×10⁵ protoplasts per ml of culture medium. Cell-free extract from callus enhanced protoplast division and the highest plating efficiency was about 7%. Protoplast-derived colonies showed significant variations in both growth and paclitaxel content. A negative correlation existed between paclitaxel accumulation in colonies and their growth to some extent (r = −0.4485). Among 70 colonies isolated from the heterogeneous protoplast cultures, colony TY-7 accumulated the highest paclitaxel content. Paclitaxel accumulation in colony TY-7 was not great enough to produce paclitaxel for commercial purposes, however, success in inducing colony formation from T. yunnanensis protoplasts provides an opportunity to obtain cell lines with high paclitaxel productivity from mutagenized protoplast cultures. This revised version was published online in June 2006 with corrections to the Cover Date.     

An improved protocol for the culture of cassava leaf protoplasts

Viable protoplasts (yield > 1.9 × 10⁷ g^–1 fresh weight; mean viability 85±2%, n=5) were isolated from leaves of axenic shoot cultures of Manihot esculenta Crantz. cv. M. Thai 8. Protoplasts were cultured for up to 50 days in liquid, ammonium-free MS medium, overlaying agarose-solidified B5 medium with short glass rods embedded perpendicularly within, and protruding from, the agarose layer. Control protoplasts were cultured identically, but without glass rods. Sustained protoplast division was observed only in the presence of glass rods, where the initial plating efficiency was almost 6-fold greater than control (p < 0.05). The mean final plating efficiency of treated cultures was 1.0±0.2% while, in contrast, significant colony formation was not observed in controls.Abbreviations BA 6-benzyladenine - CPPU N-(2-chloro-4-pyridyl)-N'-phenylurea - MES 2[N-morpholino]ethane sulphonic acid - MS Murashige & Skoog (1962) - NAA -naphthaleneacetic acid - IPE initial plating efficiency - FPE final plating efficiency     

An improved micropropagation system for Chrysanthemum based on Pluronic F-68-supplemented media

Supplementation of MS-based medium containing 4.4 M 6-benzyladenine and 2.7 M -naphthaleneacetic acid with 0.001–0.1% (w/v) of the non-ionic, co-polymer surfactant, Pluronic F-68, significantly (p<0.05) increased the mean fresh weight gain of cultured leaf explants of chrysanthemum (Dendranthema grandiflora) Tone Maid and Early Charm by a maximum of 74% and 34%, respectively. The percentage of individual explants giving adventive shoots was also stimulated by Pluronic F-68; for cv. Early Charm, 0.001% (w/v) Pluronic F-68 induced the maximum response, whereas for cv. Tone Maid, the maximum response occurred with 0.01% surfactant. Shoot regeneration from explants was also enhanced at these concentrations of surfactant, compared to explants cultured in the absence of Pluronic F-68.Abbreviations BA 6-benzyladenine - MS Murashige & Skoog 1962 - NAA -naphthaleneacetic acid     

Plant regeneration from explant and protoplast derived calluses of Medicago littoralis

Plant regeneration from explant and protoplast derived callus has been achieved in Medicago littoralis cv. Harbinger 1886, an annual legume resistant to the fungus Pseudopeziza medicaginis. Callus was induced from different tissue explants and the fastest growth rate was observed for hypocotyls in B5 medium with 2 mg l^–1 2,4-dichlorophenoxyacetic acid and 0.5 mg l^–1 N⁶-benzyladenine. Protoplasts were isolated from cotyledons and leaves of sterile plants and from callus; the first two kinds of protoplasts showed a plating efficiency of 5.6% and 5%, respectively, when embedded in agarose. Plant regeneration occurred on media containing % MathType!MTEF!2!1!+-% feaafiart1ev1aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn% hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr% 4rNCHbGeaGqiVu0Je9sqqrpepC0xbbL8F4rqqrFfpeea0xe9Lq-Jc9% vqaqpepm0xbba9pwe9Q8fs0-yqaqpepae9qq-f0-yqaqVeLsFr0-vr% 0-vr0db8meaabaqaciGacaGaaeqabaWaaeaaeaaakeaacaqGobWaaW% baaSqabeaacaqG2aaaaOGaaeOVfiaabs5adaahaaWcbeqaaiaaikda% aaGccaqG+waaaa!3F97!\[{\text{N}}^{\text{6}} {\text{\Delta }}^2 {\text{}}\]isopentenyl-adenine combined with indole-3-acetic acid or 1,2-benzisoxazole-3-acetic acid, and on media with N⁶-benzyladenine plus -naphtaleneacetic acid; a cytokinin/auxin ratio higher than 1 induced embryos while a ratio around 1 stimulated shoot formation. Embryo development and rooting of shoots were performed in RL medium without growth regulators.Abbreviations NAA -naphthaleneacetic acid - BA N⁶-benzyladenine - 2,4-D 2,4-dichlorophenoxyacetic acid - 2iP % MathType!MTEF!2!1!+-% feaafiart1ev1aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn% hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr% 4rNCHbGeaGqiVu0Je9sqqrpepC0xbbL8F4rqqrFfpeea0xe9Lq-Jc9% vqaqpepm0xbba9pwe9Q8fs0-yqaqpepae9qq-f0-yqaqVeLsFr0-vr% 0-vr0db8meaabaqaciGacaGaaeqabaWaaeaaeaaakeaacaqGobWaaW% baaSqabeaacaqG2aaaaOGaaeOVfiaabs5adaahaaWcbeqaaiaaikda% aaGccaqG+waaaa!3F97!\[{\text{N}}^{\text{6}} {\text{\Delta }}^2 {\text{}}\]isopentenyl-adenine - IAA indole-3-acetic acid - BOA 1,2-benzisoxazole-3-acetic acid - KIN kinetin - MS Murashige & Skoog (1962) - GRFMS growth regulator free MS medium - B5 Gamborg et al. (1968) - RL Phillips & Collins (1979) - KM8 KM8P Kao & Michayluk (1975) - CPW Frearson et al. (1973) - f. wt fresh weight - FDA fluorescoin diacetate     

A protoplast to plant system in roses

High yields of protoplasts were isolated from embryogenic suspension cultures of Rosa persica x xanthina and Rosa wichuraiana using an enzyme mixture comprising 20 g l^-1 cellulase Onozuka R10, 1 g l^-1 Pectolyase Y-23 and 10 g l^-1 hemicellulase. Agarose-immobilized protoplasts gave the most consistent growth at a plating density of 5×10⁴ protoplasts ml^-1 on the basic medium of Kao & Michayluk (KM8p) containing 2 mg l^-1 naphthaleneacetic acid and 1 mg l^-1 benzylaminopurine. At 25°C in the dark, 0.004% of R. persica x xanthina protoplasts developed into colonies. Using similar culture conditions, but with a plating density of 9×10⁴ protoplasts ml^-1, 0.017% of R. wichuraiana protoplasts developed into colonies. On transfer of R. persica x xanthina colonies to Schenk & Hildebrandt's medium containing 3 mg l^-1 2,4-dichlorophenoxyacetic acid, globular and later stage embryos were formed. Approximately 30% of these embryos developed into plantlets on transfer to basal Schenk & Hildebrandt's medium. Further development of the plantlets took place on cellulose plugs (Sorbarods) soaked in Murashige & Skoog's medium containing 0.05 mg l^-1 naphthaleneacetic acid, 0.05 mg l^-1 indole-3-butyric acid and 0.1 mg l^-1 benzylaminopurine. Rose breeding is now open to the full range of in vitro genetic manipulation techniques involving protoplast technology.     

Regeneration of Mesophyll Protoplasts Isolated from Dihaploid Clones of Solanum tuberosum

Protoplasts have been isolated from leaves of shoot cultures of six dihaploid clones of Solanum tuberosum L. (2n = 2x = 24). In the KM medium (Kao and Michayluk 1975), sustained cell divisions were obtained in up to 50% of the plated protoplasts of four clones, whereas only a few divisions occurred in the other two clones. The first mitosis appeared 2–8 days after plating, dependent on the clones. In the clones showing sustained cell divisions, a protoplast titre of about 5 × 10³ per ml turned out to be optimal. The culture conditions for protoplasts of one of the poorly growing clones, clone H² 140, have been improved using modified KM media, plating at a concentration of as high as 5 × 10⁴ cells per ml, and subsequent diluting at intervals 5 days. The dilutions were carried out with media containing 0.25% agar. Up to 60% of the plated protoplasts underwent divisions within 10 days under these conditions. After about 15 days, the regenerants were transferred onto media inducing organogenesis. Shoots and roots were formed on modified media MS (Murashige and Skoog 1962) and B5 (Gamborg et al. 1968). Plants have been regenerated in four of the investigated clones. Countings of chromosomes revealed a satisfactory stability of the karyotype in shoot culture and protoplast regeneration.     

Isolation and culture of protoplasts from embryogenic suspension cultures of red fescue (Festuca rubva L.)

Protoplasts were isolated from fast-growing embryogenic suspension cultures of red fescue cv. Dawson (Festuca rubra L.) without agitation. The enzyme isolation solution was highly efficient at releasing protoplasts of greater than 95% viability (5×10⁶–10⁷ protoplasts per ml of packed cell volume). A three step procedure was followed for washing and transferring protoplasts from a solution high in inorganic salts to a medium containing glucose and sucrose. The addition of 30 mM sodium thiosulfate to the wash and culture media was found to be helpful in reducing the number of lysed protoplasts. Isolated protoplasts began to divide within 48–72 h when protoplasts were plated in agarose squares and surrounded by nurse cells (mixed nurse plating technique). Maximum colony formation (plating efficiency) was approximately 1%. Many of the colonies continued to grow and produced embryos when transferred to a medium consisting of half-strength MS salts, 4 mg/l 2,4-D, 3 g/l casein hydrolysate and 30 g/l sucrose. Upon transfer to hormone-free medium and exposure to light 16 h/day, many of the embryos germinated to produce green leaves and roots.Abbreviations BA Benzylaminopurine - 2,4-D 2,4-dicholorophenoxyacetic acid - DMSO dimethyl sulfoxide - MES 2-(N-morpholino)-ethanesulfonicn acid - MS Murashige and Skoog medium (1962) - UGC Ultraclone Growth Chamber - KM Kao and Michayluk medium (1975) - NAA Naphthalene acetic acid     

In vitro cellular responses to a non-ionic surfactant,Pluronic F-68

Summary The effects of a non-ionic surfactant, Pluronic F-68, on growth of chick embryonic fibroblasts and hamster melanoma cellsin vitro have been studied. Low concentrations (0.05–0.1% w/v) of commercial grade Pluronic stimulated growth of both cell types whereas low concentrations of purified Pluronic inhibited fibroblast growth but strongly stimulated growth of melanoma cells. These observations suggest that Pluronic may have value for regulating growth of cell cultures.     

Callus formation from protoplasts of Artemisia sphaerocephala Krasch and some factors influencing protoplast division

Round wormwood (Artemisia sphaerocephala Krasch) seeds were germinated on Murashige & Skoog (1962) medium without plant growth regulators. The hypocotyls of seedlings were sliced and cultured on M1 medium with 2,4-dichlorophenoxyacetic acid (9.05 M) to induce callus. The induced calluses were subcultured on the same medium. Ten day old calluses were used to isolate protoplasts in an enzyme solution with 0.65 M mannitol. Protoplast yield strongly depended upon the state of callus cultures. Certain amount of hemicellulase could improve protoplast isolation. Purified protoplasts were cultured in modified Kao & Michayluk (1975) medium with 0.60 M mannitol as osmoticum, suggesting that protoplasts of A. sphaerocephala need a high initial osmolarity. Protoplasts generally divided evenly and the percentage of first division could reach 10%. Kinetin exhibited a positive effect on initial cell division. Furthermore, we studied the effect of protoplast density and vitamin C on sustained growth of protoplasts. After forty days, 1 mm calluses in diameter formed.Abbreviations CH casein hydrolysate - 2,4-D 2,4-dichlorophenoxyacetic acid - KM8P Kao & Michayluk (1975) protoplast medium - MS Murashige & Skoog (1962) medium - MES-2 (N-morpholino)ethanesulfonic acid