High resolution scanning tunnelling microscopy of the beta-amyloid protein (Abeta1-40) of Alzheimer's disease suggests a novel mechanism of oligomer assembly

The aggregation of the beta-amyloid protein (Abeta) is an important step in the pathogenesis of Alzheimer's disease. There is increasing evidence that lower molecular weight oligomeric forms of Abeta may be the most toxic species in vivo. However, little is known about the structure of Abeta oligomers. In this study, scanning tunnelling microscopy (STM) was used to examine the structure of Abeta monomers, dimers and oligomers. Abeta1-40 was visualised by STM on a surface of atomically flat gold. At low concentrations (0.5 microM) small globular structures were observed. High resolution STM of these structures revealed them to be monomers of Abeta. The monomers measured approximately 3-4 nm in diameter. Internal structure was seen in many of the monomers consistent with a conformation in which the polypeptide chain is folded into 3 or 4 domains. Oligomers were seen after ageing the Abeta solution for 24 h. The oligomers were also 3-4 nm in width and appeared to be formed by the end-to-end association of monomers with the polypeptide chain oriented at 90 degrees to the axis of the oligomer. The results suggest that the oligomer formation can proceed through a mechanism involving the linear association of monomers.     

Influence of pectins on the solubility and the molar mass distribution of dehydrogenative polymers (DHPs, lignin model compounds).

Dehydrogenation polymers (DHPs, lignin model compounds) were synthesized in the presence of increasing pectin concentrations using two different methods. The first method ('Zutropfverfahren', ZT) consists in the slow adding of monomers whereas in the second method ('Zulaufverfahren', ZL) all the reactants are added simultaneously. DHPs solubility increases with the pectin concentration in the ZT experiments and remains stable in the ZL experiments. Covalent bonds between pectin and DHP are formed during ZT polymerization resulting in lignin carbohydrate complex (LCC) which keeps the unbound DHPs in solution by the formation of aggregate or micelle-like structures. In contrast LCC are not formed during the ZL process which behave like the DHP reference. The ZT DHP molar masses increase observed is attributed to the reactivity of the high molar mass polymer solubilized by the LCC whereas ZL higher molar mass polymers are precipitated out of the solution and cannot react further.     

On the role of the monolignol γ-carbon functionality in lignin biopolymerization

In order to investigate the importance of the monomeric γ-carbon chemistry in lignin biopolymerization and structure, synthetic lignins (dehydrogenation polymers; DHP) were made from monomers with different degrees of oxidation at the γ-carbon, i.e., carboxylic acid, aldehyde and alcohol. All monomers formed a polymeric material through enzymatic oxidation. The polymers displayed similar sizes by size exclusion chromatography analyses, but also exhibited some physical and chemical differences. The DHP made of coniferaldehyde had poorer solubility properties than the other DHPs, and through contact angle of water measurement on spin-coated surfaces of the polymeric materials, the DHPs made of coniferaldehyde and carboxylic ferulic acid exhibited higher hydrophobicity than the coniferyl alcohol DHP. A structural characterization with ¹³C NMR revealed major differences between the coniferyl alcohol-based polymer and the coniferaldehyde/ferulic acid polymers, such as the predominance of aliphatic double bonds and the lack of certain benzylic structures in the latter cases. The biological role of the reduction at the γ-carbon during monolignol biosynthesis with regard to lignin polymerization is discussed.     

Structure of immunoglobulin G by scanning tunnelling microscopy

Scanning tunnelling microscopy (STM) has been used to examine the shape of individual immunoglobulin G (IgG) molecules deposited onto a graphite surface. IgG was chosen for this study as it has a well-characterized and distinctive three-dimensional structure. The micrographs clearly reveal the IgG molecule as trilobed, corresponding with the known structural organization of IgG. Comparison of these images with the structure of IgG determined by X-ray crystallography shows that the STM images are consistent with the crystal structure. This illustrates that STM is a valuable technique for examining protein structure, allowing rapid determination of the overall molecular shape that is consistent with more established techniques.     

Structural characteristics of the beta-sheet-like human and rat islet amyloid polypeptides as determined by scanning tunneling microscopy

We demonstrate in this work that scanning tunneling microscopy (STM) provides a useful approach to obtaining structural information about human islet amyloid polypeptide (hIAPP) and rat islet amyloid polypeptide (rIAPP) assembly on highly oriented pyrolytic graphite (HOPG) with sub-molecular resolution. The observed hIAPP and rIAPP lamellae consisted of parallel stripes. The STM images of hIAPPs show multiple molecular folding structures, with an average of 11 amino acid residues for the core regions. In addition, the STM images also reveal the assembly characteristics of rIAPP lamellae and may indicate a secondary structural conformation from random coil to beta-sheet-like on the graphite surface.     

Sequence, packing and nanometer scale structure in STM images of nucleic acids under water

Scanning tunneling microscope (STM) images of random-sequence nucleic acid polymers under water show internal structure which depends strongly on the packing density of the polymer. Images of dense aggregates have a semicrystalline order with the individual polymers adopting simple periodic structures. Loose aggregates (or isolated molecules) show structural variability with considerable local bending and curving on a nanometer scale. It is not clear to what extent this structure is induced by the operation of the microscope. In order to investigate the possibility that the structure is sequence directed, we have imaged various DNA and RNA polymers at low packing densities. We present results here for random sequence DNA, poly(dAT).poly(dAT), poly(dA).poly(dT), poly(dCG).poly(dCG) and for random sequence RNA and poly(U). In contrast to loose aggregates of the random sequence material, the homopolymers show few sharp bends. Furthermore, the homopolymers appear to yield characteristic backbone patterns, usually at resolutions in excess of that obtained with random sequence polymers. The random sequence polymers show much more evidence of image distortion due to tip-molecule interactions, suggesting that they are, on average, mechanically less stable in the STM tunnel-gap than the homopolymers. Thus, while some of the structure observed in STM images is a consequence of tip-molecule interactions, it is related to sequence-directed properties of the polymer.     

Enzymatic polymerization of coniferyl alcohol in the presence of cyclodextrins

The dehydrogenative polymerization of coniferyl alcohol by horseradish peroxidase was performed in 0.10 M phosphate buffer at 27 degrees C. Dehydrogenative polymer (DHP) from coniferyl alcohol was characterized by size exclusion chromatography (SEC) and nuclear magnetic resonance (NMR) spectroscopy. The ratio of 8-O-4':8-5':8-8' linkages was determined by the 1H NMR spectrum of DHP acetate which had good solubility. In "end-wise like" polymerization (the slow addition of hydrogen peroxide), addition of alpha-cyclodextrin to the medium led to DHP with increased 8-O-4' content and a decrease in 8-5' linkages. Under higher pH conditions, DHP with higher 8-O-4' and 8-5' content was obtained in the presence of alpha-cyclodextrin. In the end-wise polymerization (the slow additions of coniferyl alcohol and hydrogen peroxide), using alpha-cyclodextrin also gave DHP with a 8-O-4' richer structure than that prepared in no additive system. The analysis of thioacidolysis products from DHP supported the results of the alpha-cyclodextrin effects on the 8-O-4'-rich structure of DHP. The 8-O-4' structure in DHP prepared in the presence of alpha-cyclodextrin had racemic form as shown by ozonation.     

Self-assembly of electroactive layer-by-layer films of heme proteins with anionic surfactant dihexadecyl phosphate

Anionic surfactant dihexadecyl phosphate (DHP) with two hydrocarbon chains can be self-assembled into a double-layer structure with tail-to-tail configuration and negatively charged head groups toward outside in its aqueous dispersion. Due to this unique biomembrane-like structure, the "charge reversal" in DHP adsorption on solid surface was realized, and the DHP was successfully assembled with positively charged myoglobin (Mb) or hemoglobin (Hb) into {DHP/protein}(n) layer-by-layer films. Quartz crystal microbalance (QCM), UV-vis spectroscopy, and cyclic voltammetry (CV) were used to monitor or confirm the film assembly process. The {DHP/protein}(n) films grown on pyrolytic graphite (PG) electrodes showed a pair of well-defined and nearly reversible CV peaks at about -0.35 V vs SCE in pH 7.0 buffers, characteristic of the protein heme Fe(III)/Fe(II) redox couples. Based on the direct electrochemistry of heme proteins, the {DHP/protein}(n) films could also be used to electrochemically catalyze reduction of oxygen, hydrogen peroxide and nitrite with significant lowering of reduction overpotentials. Scanning electron microscopy (SEM), UV-vis spectroscopy, and reflectance absorption infrared (RAIR) spectroscopy were employed to characterize the {DHP/protein}(n) films, suggesting that the proteins in the films retain their near-native structure.     

Sequence,Packing and Nanometer Scale Structure in STM Images of Nucleic Acids Under Water

Abstract

Scanning tunneling microscope (STM) images of random-sequence nucleic acid polymers under water show internal structure which depends strongly on the packing density of the polymer. Images of dense aggregates have a semicrystalline order with the individual polymers adopting simple periodic structures. Loose aggregates (or isolated molecules) show structural variability with considerable local bending and curving on a nanometer scale. It is not clear to what extent this structure is induced by the operation of the microscope. In order to investigate the possibility that the structure is sequence directed, we have imaged various DNA and RNA polymers at low packing densities. We present results here for random sequence DNA, poly(dAT) · poly(dAT), poly(dA) · poly(dT), poly(dCG) · poly(dCG) and for random sequence RNA and poly(U). In contrast to loose aggregates of the random sequence material, the homopolymers show few sharp bends. Furthermore, the homopolymers appear to yield characteristic backbone patterns, usually at resolutions in excess of that obtained with random sequence polymers. The random sequence polymers show much more evidence of image distortion due to tip-molecule interactions, suggesting that they are, on average, mechanically less stable in the STM tunnel-gap than the homopolymers. Thus, while some of the structure observed in STM images is a consequence of tip-molecule interactions, it is related to sequence-directed properties of the polymer.     

High order quaternary arrangement confers increased structural stability to Brucella sp. lumazine synthase

The penultimate step in the pathway of riboflavin biosynthesis is catalyzed by the enzyme lumazine synthase (LS). One of the most distinctive characteristics of this enzyme is the structural quaternary divergence found in different species. The protein exists as pentameric and icosahedral forms, built from practically the same structural monomeric unit. The pentameric structure is formed by five 18-kDa monomers, each extensively contacting neighboring monomers. The icosahedrical structure consists of 60 LS monomers arranged as 12 pentamers giving rise to a capsid exhibiting icosahedral 532 symmetry. In all lumazine synthases studied, the topologically equivalent active sites are located at the interfaces between adjacent subunits in the pentameric modules. The Brucella sp. lumazine synthase (BLS) sequence clearly diverges from pentameric and icosahedric enzymes. This unusual divergence prompted us to further investigate its quaternary arrangement. In the present work, we demonstrate by means of solution light scattering and x-ray structural analyses that BLS assembles as a very stable dimer of pentamers, representing a third category of quaternary assembly for lumazine synthases. We also describe by spectroscopic studies the thermodynamic stability of this oligomeric protein and postulate a mechanism for dissociation/unfolding of this macromolecular assembly. The higher molecular order of BLS increases its stability 20 degrees C compared with pentameric lumazine synthases. The decameric arrangement described in this work highlights the importance of quaternary interactions in the stabilization of proteins.     

Polymerization of monolignols by redox shuttle-mediated enzymatic oxidation: a new model in lignin biosynthesis I

Lignin is one of the most abundant biopolymers, and it has a complex racemic structure. It may be formed by a radical polymerization initiated by redox enzymes, but much remains unknown about the process, such as how molecules as large as enzymes can generate the compact structure of the lignified plant cell wall. We have synthesized lignin oligomers according to a new concept, in which peroxidase is never in direct contact with the lignin monomers coniferaldehyde and coniferyl alcohol. Instead, manganese oxalate worked as a diffusible redox shuttle, first being oxidized from Mn(II) to Mn(III) by a peroxidase and then being reduced to Mn(II) by a simultaneous oxidation of the lignin monomers to radicals that formed covalent linkages of the lignin type. Furthermore, a high molecular mass polymer was generated by oxidation of coniferyl alcohol by Mn(III) acetate in a dioxane and water mixture. This polymer was very similar to natural spruce wood lignin, according to its NMR spectrum. The possible involvement of a redox shuttle/peroxidase system in lignin biosynthesis is discussed.     

S抗原与抗体结合的扫描隧道显微镜研究

用扫描隧道显微镜观察了兔Ｓ抗原及其与鼠抗兔Ｓ抗原抗体相互作用所形成的复合物,结果表明,Ｓ抗原单体呈椭球状。其二维尺寸为７．５ｎｍ×５．３ｎｍ,且常以二聚体形式存在。抗原分别结合于抗体的二个Ｆａｂ段,既可以单体结合,也可以二聚体形式结合。     

Molecular design of modified polyacrylamide for the salt tolerance

In our work, three kinds of functional monomers were selected to modify polyacrylamide (PAM) or partially hydrolyzed polyacrylamide (HPAM) by molecular dynamics simulation so as to achieve the stronger salt-tolerance of modified HM-HPAM. The radius of gyration (R (g)), the hydrodynamic radius (R (H)), the effective length (L (ef)) and the intrinsic viscosity ([η]) for modified PAM or HPAM were studied in aqueous solutions with different ionic strength at 298?K. The results showed that modified HM-HPAM has a stronger salt tolerance and the salt tolerance increases gradually from HM-HPAM1 to HM-HPAM3 because the monomers with different steric hindrance would reduce the curliness of molecular chains and, consequently, improve the salt tolerance. So, introducing the steric hindrance monomer into polymer will increase the salt tolerance of the polymer and it is indicated that the simulated results agree with the experimental results very well. Furthermore, the radial distribution function (RDF) has been used to investigate the effect of NaCl on the hydration of the -COO- groups of the HM-HPAM from microscopic view.     

Molecular modelling of the major peanut allergen Ara h 1 and other homotrimeric allergens of the cupin superfamily: a structural basis for their IgE-binding cross-reactivity

Three-dimensional models of the major vicilin allergens from peanut (Ara h 1), lentil (Len c 1) and pea (Pis s 1), were built by homology-based modelling from the X-ray coordinates of the structurally closely related soybean beta-conglycinin. All the allergen monomers exhibit the typical cupin motif made of two modules related by a pseudo-dyad axis. Each module consists of a beta-barrel core domain associated to a loop domain which mainly contains alpha-helices. The three cupin motifs are assumed to be arranged in a homotrimeric structure similar to that observed in beta-conglycinin, phaseolin or canavalin. Most of the sequential B-cell epitopes characterized on the C-terminus of the Ara h 1 allergen are well conserved in both Len c 1 and Pis s 1 allergens. They occupy very comparable areas on the molecular surface of the allergens and exhibit a similar three-dimensional conformation. This antigenic community readily accounts for the IgE-binding cross-reactivity commonly observed between the vicilin allergens from edible legume seeds. The clinical implication of this cross-reactivity is addressed for a definite diagnosis of legume seed allergy.     

Bacterial degradation of dehydropolymers of coniferyl alcohol

A bacterial isolate identified as Xanthomonas sp. proved to be ligninolytic due to its ability to degrade ¹⁴C-labeled dehydropolymers of coniferyl alcohol (DHP) and [14C]lignocellulose complexes from corn plants (Zea mays). Several parameters of ligninolysis were evaluated and it was shown that resting cells degrade DHP as sole carbon source. Enhancement of DHP degradation in the presence of ferulic acid or water-soluble fractions of DHP or of dioxane lignin from wheat was demonstrated. It is shown that a dissociation of DHP takes place during incubation in the absence of the bacteria which is reflected in a shift of DHP to lower molecular weight fractions. Bacterial degradation of [14C] DHP results in the release of ¹⁴CO₂ and in the incorporation of the ¹⁴C-label into the biomass of the bacteria, as shown by chemical and biological methods.Abbreviations Bq Becquerel, measure for radioactivity according to SI nomenclature - DHP dehydropolymers of coniferyl alcohol - DMF dimethylformamide - DMSO dimethyl sulfoxide - HPLC high performance liquid chromatography - TCA trichloroacetic acid - THF tetrahydrofuran     

Amphitrite ornata dehaloperoxidase (DHP): investigations of structural factors that influence the mechanism of halophenol dehalogenation using "peroxidase-like" myoglobin mutants and "myoglobin-like" DHP mutants

Dehaloperoxidase (DHP), discovered in the marine terebellid polychaete Amphitrite ornata, is the first heme-containing globin with a peroxidase activity. The sequence and crystal structure of DHP argue that it evolved from an ancient O(2) transport and storage globin. Thus, DHP retains an oxygen carrier function but also has the ability to degrade halophenol toxicants in its living environment. Sperm whale myoglobin (Mb) in the ferric state has a peroxidase activity ～10 times lower than that of DHP. The catalytic activity enhancement observed in DHP appears to have been generated mainly by subtle changes in the positions of the proximal and distal histidine residues that appeared during DHP evolution. Herein, we report investigations into the mechanism of action of DHP derived from examination of "peroxidase-like" Mb mutants and "Mb-like" DHP mutants. The dehalogenation ability of wild-type Mb is augmented in the peroxidase-like Mb mutants (F43H/H64L, G65T, and G65I Mb) but attenuated in the Mb-like T56G DHP variant. X-ray crystallographic data show that the distal His residues in G65T Mb and G65I are positioned ～0.3 and ～0.8 ?, respectively, farther from the heme iron compared to that in the wild-type protein. The H93K/T95H double mutant Mb with the proximal His shifted to the "DHP-like" position has an increased peroxidase activity. In addition, a better dehaloperoxidase (M86E DHP) was generated by introducing a negative charge near His89 to enhance the imidazolate character of the proximal His. Finally, only minimal differences in dehalogenation activities are seen among the exogenous ligand-free DHP, the acetate-bound DHP, and the distal site blocker L100F DHP mutant. Thus, we conclude that binding of halophenols in the internal binding site (i.e., distal cavity) is not essential for catalysis. This work provides a foundation for a new structure-function paradigm for peroxidases and for the molecular evolution of the dual-function enzyme DHP.     

Binding synergy and cooperativity in dihydrodipicolinate reductase: implications for mechanism and the design of biligand inhibitors

Dihydrodipicolinate reductase (DHPR) is a homotetramer that catalyzes reduction of dihydrodipicolinate (DHP). We recently reported a biligand inhibitor ( K i = 100 nM) of DHPR, comprised of fragments that bind in the NADH (CRAA = catechol rhodanine acetic acid) and DHP (PDC = pyridine dicarboxylate) binding sites. Herein, we characterize binding synergy and cooperativity for ligand binding to Escherichia coli DHPR: NADH or CRAA and PDC (stable analog of DHP). While K d values indicate little synergy between NADH and PDC, (1)H- (15)N HSQC chemical shift perturbation and saturation transfer difference (STD) titrations indicate that PDC induces a more dramatic conformational change than NADH, consistent with a role in domain closure. PDC binds cooperatively (Hill coefficient = 2), while NADH does not, based on STD titrations that monitor only fast exchange processes. However, HSQC titrations monitoring Trp253 (located between monomers) indicate that NADH binds in two steps, with high affinity binding to only one of the monomers. Therefore, DHPR binds cofactor via a sequential model, with negative cooperativity. These results, interpreted in light of steady-state data, suggest that DHPR activity requires NADH binding at only one of the four monomers. Implications of our results for fragment assembly are discussed, using CRAA tethering to PDC as a model biligand: (a) if one fragment (ex. PDC) must induce a large structural change before the other fragment is brought proximal, this must be screened for upfront, and (b) cooperative or synergistic interactions between binding sites can lead to unexpected and misleading effects in NMR-based screening.     

Scanning tunneling microscopy with applications to biological surfaces

Each major advance in the field of microscopy has eventually been translated into major advances in the biological and medical sciences. The scanning tunneling microscope (STM) offers exciting new ways of imaging biological surfaces with resolution to the sub-molecular scale. Rigid, conductive surfaces can readily be imaged with the STM with atomic resolution. Unfortunately, few biological surfaces are sufficiently conductive or rigid enough to be examined directly with the STM. At present, non-conductive surfaces can be examined in two ways: 1) Sufficiently thin molecular layers attached to conductive substrates so that tunneling can occur through the molecules; or 2) coating or replicating non-conductive surfaces with metal layers so as to make them conductive, then imaging with the STM. We present images of biological and organic molecules obtained with these techniques that demonstrate the possibilities and limitations of each. Future advances leading to atomic resolution STM of biological surfaces depend on significant progress in the art and science of making biomaterials compatible with the restrictions of the instrument.     

Structure and optical properties of plant cell wall bio-inspired materials: cellulose-lignin multilayer nanocomposites

Interfacial affinity between lignin model compound (dehydrogenation polymer [DHP]) and cellulose nanocristals (CN) was studied before building a nanocomposite cellulose/lignin in multilayer form by spin-coating method. The adsorption isotherm of DHP was measured by ellipsometry at the liquid/CN film interface and showed that the surface concentration of adsorbed DHP increases with the bulk concentration in solution. The DHP appeared as globular structures on cellulosic film, as observed by AFM. Spreading a dense lignin layer on CN film gave rise to the disappearance of the InfraRed resonance bands related to the DHP aromatics. The film obtained from alternate layers of cellulose/DHP was transparent in visible light and had weak absorption in UV wavelengths. Optical properties measured in the visible wavelength range by ellipsometry and spectrophotometry indicated that beyond six bilayers (cellulose/DHP), the composite exhibits antireflexion properties.     

钝顶螺旋藻C—藻蓝蛋白分子的STM研究

钝顶螺旋藻Ｃ┐藻蓝蛋白分子的ＳＴＭ研究张玉忠＊１,２时东霞１周百成２曾呈奎２庞世瑾１（１中国科学院北京真空物理实验室,北京２７２４信箱,北京１０００８０）（２中国科学院海洋研究所,青岛２６６０７１）关键词钝顶螺旋藻;Ｃ－藻蓝蛋白;扫描隧道显微镜藻胆蛋...