A simple immunological detection method for the direct screening of genes from clone banks

A simple immunoassay has been developed which can be used in the isolation of particular gene(s) from a clone bank of recombinant plasmids. A clone bank of the DNA is constructed with a plasmid vector and maintained in Escherichia coli. The recombinant clones were filtered onto a hydrophobic grid membrane and grown up into individual colonies, and a replica was made onto nitrocellulose paper. The bacterial cells were then lysed with chloroform and the proteins were immobilized onto the nitrocellulose paper. The nitrocellulose paper is then reacted with a rabbit antibody preparation made against the particular antigenic product to detect the recombinant clone which carries the corresponding gene. The bound antibodies can be detected easily by a colorimetric assay using goat anti-rabbit antibodies conjugated to horseradish peroxidase. Positively reacting clones can be recovered from the master hydrophobic grid membrane filter for further characterization. We proposed to call this method "colony ELISA blot" and described the isolation of the genes coding for the soluble antigens of Pasteurella haemolytica using this method.     

Isolation of viral coat protein mutants with altered assembly and aggregation properties

A method was developed to screen bacteria for synthesis of mutant proteins with altered assembly and solubility properties using bacteriophage MS2 coat protein as a model self-associating protein. Colonies expressing coat protein from a plasmid were covered with an agarose overlay under conditions that caused the lysis of some of the cells in each colony. The proteins thus liberated diffused through the overlay at rates depending on their molecular sizes. After transfer of the proteins to a nitrocellulose membrane, probing with coat protein-specific antiserum revealed spots whose sizes and intensities were related to the aggregation state of coat protein. The method was employed in the isolation of assembly defective mutants and to find soluble variants of an aggregation-prone coat protein mutant.     

Rapid In Situ Assay for Indoleacetic Acid Production by Bacteria Immobilized on a Nitrocellulose Membrane

We have developed a new assay that differentiates between indoleacetic acid (IAA)-producing and -nonproducing bacteria on a colony plate lift. Medium supplemented with 5 mM L-tryptophan is inoculated with isolates of interest, overlaid with a nitrocellulose membrane, and then incubated until bacterial colonies reach 1 to 2 mm in diameter. The membrane is removed to a filter paper saturated with Salkowski reagent and incubated until distinct red haloes form around the colonies. The colorimetric reaction to IAA is limited to a region immediately surrounding each colony, is specific to isolates producing IAA, occurs within 1 h after the membrane is placed in the reagent, and is sensitive to as little as 50 pmol of IAA in a 2-mm² spot. We have used this assay for quantifying epiphytic and endophytic populations of IAA-producing isolates of Pseudomonas syringae subsp. savastanoi and for detecting IAA-producing colonies of other pseudomonads and Erwinia herbicola. The assay provides a rapid and convenient method to screen large numbers of bacteria.     

Screening of cloned recombinant DNA in bacteria by in situ colony hybridization.

We have developped in situ methods of colony hybridization in which there is no need to replicate colonies one by one prior to hybridization. The best method consists in promoting partial lysis of the colonies on the plates by means of a resident thermoinducible prophage. It appears that colonies are heterogeneous with respect to prophage induction, so that survivors remain in each colony. Blotting onto nitrocellulose filters and hybridization with a highly radioactive probe permits the screening of many thousands of colonies per plate for the presence of a DNA sequence carried by a plasmid and complementary to the probe. This procedure greatly facilitates the isolation of recombinant plasmids which carry a specific DNA sequence. We also describe a second, less efficient procedure which does not use prophage induced lysis, and is potentially usable with B2 or EK2 safety systems, without modification of the bacterial hosts.     

High-throughput screening of soluble recombinant proteins

The aims of high-throughput (HTP) protein production systems are to obtain well-expressed and highly soluble proteins, which are preferred candidates for use in structure-function studies. Here, we describe the development of an efficient and inexpensive method for parallel cloning, induction, and cell lysis to produce multiple fusion proteins in Escherichia coli using a 96-well format. Molecular cloning procedures, used in this HTP system, require no restriction digestion of the PCR products. All target genes can be directionally cloned into eight different fusion protein expression vectors using two universal restriction sites and with high efficiency (>95%). To screen for well-expressed soluble fusion protein, total cell lysates of bacteria culture ( approximately 1.5 mL) were subjected to high-speed centrifugation in a 96-tube format and analyzed by multiwell denaturing SDS-PAGE. Our results thus far show that 80% of the genes screened show high levels of expression of soluble products in at least one of the eight fusion protein constructs. The method is well suited for automation and is applicable for the production of large numbers of proteins for genome-wide analysis.     

Conditions for reproducible detection of calmodulin and S100 beta in immunoblots

The conditions used in some immunoblot procedures can fail to detect calmodulin, S100 proteins, and other proteins with similar physical properties. We describe here some of the basis of this difficulty, and provide an immunoblot protocol that allows the rapid and reproducible detection of calmodulin and S100 beta in crude biological samples. These proteins are rapidly transferred from sodium dodecyl sulfate-polyacrylamide gels to membrane matrices, and retention on the matrix is enhanced by a glutaraldehyde fixation step. Either nitrocellulose or a positively charged membrane filter (ZetaProbe) can be used as the immobilizing matrix. By combining microslab gel electrophoresis, 30 min electrophoretic transfer, and glutaraldehyde fixation of nitrocellulose paper, an immunoblot analysis can be done in an 8-hr day.     

Screening for soluble expression of recombinant proteins in a 96-well format

For future structural and functional genomics programs new tools will be required. The implementation of high-throughput (HTP) methods for protein production will be an essential element. Present HTP protein production developments in structural genomics are aimed at obtaining well-expressing and highly soluble proteins, which are preferred candidates for structure-function studies. Here, we describe a cheap and efficient procedure to identify well-expressing soluble proteins in Escherichia coli in a compact 96-well format. Reproducible lysis on filter plates, followed by a filtration step on 96-well filter plates, allows the efficient separation of inclusion bodies from the soluble fraction. In the following step a dot blot procedure using anti-RGS-His(4) antibody (Qiagen) to detect expression of recombinant His-tagged protein is applied allowing direct detection of the target protein in the soluble fraction. The method is well suited for automation and should be applicable to expression screening of most proteins and fusion domains to which specific antibodies are available.     

Colony filtration blot: a new screening method for soluble protein expression in Escherichia coli

The implementation of efficient technologies for the production of recombinant mammalian proteins remains an outstanding challenge in many structural and functional genomics programs. We have developed a new method for rapid identification of soluble protein expression in E. coli, based on a separation of soluble protein from inclusion bodies by a filtration step at the colony level. The colony filtration (CoFi) blot is very well suited to screen libraries, and in the present work we used it to screen a deletion mutagenesis library.     

A lateral flow biosensor for rapid detection of DNA-binding protein c-jun

A lateral flow biosensor based on an immuno-chromatographic assay has been developed for the detection of DNA-binding proteins. The biosensor is composed of four parts: a sample pad, a conjugate pad, a strip of nitrocellulose membrane and an absorbent pad. A DNA probe containing a specific protein binding consensus sequence is coated onto gold nanoparticles, while an antibody against the DNA-binding protein is immobilized onto a test zone of the nitrocellulose membrane. The target protein binds to the protein binding DNA sequence that is coated on the gold nanoparticles to form nanoparticle-DNA-protein complexes, and the complexes are then captured by the antibody immobilized on the test zone to form a red line for visual detection of the target protein. This biosensor was successfully applied to a DNA-binding protein, c-jun, and the developed biosensor allows for the rapid detection of down to 0.2 footprint unit of c-jun protein within 10 min. This biosensor was verified using HeLa cells and it visually detected c-jun activity in 100 μg of crude cell lysate protein. The antibody against c-jun used in the biosensor can distinguish c-jun from other nonspecific proteins, with high specificity.     

A step ahead: combining protein purification and correct folding selection

The success of recombinant protein expression seems unpredictable and even good yields of soluble proteins do not guarantee the correct folding. The search for soluble constructs can be performed by exploiting libraries and speeded up by automation, but these approaches are money and time consuming and the tags used for affinity purification can mask the real stability of the target proteins. The ideal purification protocol would include the structure quality control. A recent paper commented in this article describes a phage-display method to screen for antibodies that are able to re-fold after heat-denaturation and can be selectively affinity-purified only if monodispersed. It turned out that the proteins with high recovery performance after heat-shock were also suitable for efficient recombinant expression.     

Analysis of electroblotted proteins by mass spectrometry: protein identification after Western blotting

We describe a new approach for the identification and characterization by mass spectrometry of proteins that have been electroblotted onto nitrocellulose. Using this method (Blotting and Removal of Nitrocellulose (BARN)), proteins can be analyzed either as intact proteins for molecular weight determination or as peptides generated by on-membrane proteolysis. Acetone is used to dissolve the nitrocellulose and to precipitate the adsorbed proteins/peptides, thus removing the nitrocellulose which can interfere with MS analysis. This method offers improved protein coverage, especially for membrane proteins, such as uroplakins, because the extraction step after in-gel digestion is avoided. Moreover, removal of nitrocellulose from the sample solution allows sample analysis by both MALDI- and (LC) ESI-based mass spectrometers. Finally, we demonstrate the utility of BARN for the direct identification of soluble and membrane proteins after Western blotting, obtaining comparable or better results than with in-gel digestion.     

Rapid automated detergent screening for the solubilization and purification of membrane proteins and complexes

Membrane proteins constitute about one third of proteins encoded by all genomes, but only a small percentage have their structures deposited in the Protein Data Bank. One bottleneck in the pipeline from expression to structure determination is the identification of detergents that maintain the protein in a soluble, stable, and active state. Here, we describe a small‐scale automated procedure to easily and rapidly screen detergents for the solubilization and purification of membrane proteins, to perform detergent exchange, or to identify conditions preserving protein interactions in complexes. Hundreds of conditions can be tested in a few hours to select detergents that keep proteins folded and nonaggregated, from single membrane preparations of cells overexpressing the protein(s) of interest. Thirty‐one prokaryotic, eukaryotic, and viral membrane proteins were analyzed by our small‐scale procedure to identify the best‐associated detergents. Examples of results obtained with a bitopic and multitopic membrane proteins and membrane protein complexes are presented in more detail. DDM, DM, DMNG, TritonX‐100, LAPAO, and Fos‐12 appeared effective for successful membrane solubilization and protein purification of most selected targets. Eukaryotic proteins are in general more difficult to extract and purify from Escherichia coli membranes than prokaryotic proteins. The protocol has been developed for His‐tagged proteins, but can readily be adapted to other affinity tags by adjusting the chromatography resin and the buffer composition.     

Stabilizing Additives Added during Cell Lysis Aid in the Solubilization of Recombinant Proteins

Insoluble recombinant proteins are a major issue for both structural genomics and enzymology research. Greater than 30% of recombinant proteins expressed in Escherichia coli (E. coli) appear to be insoluble. The prevailing view is that insolubly expressed proteins cannot be easily solubilized, and are usually sequestered into inclusion bodies. However, we hypothesize that small molecules added during the cell lysis stage can yield soluble protein from insoluble protein previously screened without additives or ligands. We present a novel screening method that utilized 144 additive conditions to increase the solubility of recombinant proteins expressed in E. coli. These selected additives are natural ligands, detergents, salts, buffers, and chemicals that have been shown to increase the stability of proteins in vivo. We present the methods used for this additive solubility screen and detailed results for 41 potential drug target recombinant proteins from infectious organisms. Increased solubility was observed for 80% of the recombinant proteins during the primary and secondary screening of lysis with the additives; that is 33 of 41 target proteins had increased solubility compared with no additive controls. Eleven additives (trehalose, glycine betaine, mannitol, L-Arginine, potassium citrate, CuCl₂, proline, xylitol, NDSB 201, CTAB and K₂PO₄) solubilized more than one of the 41 proteins; these additives can be easily screened to increase protein solubility. Large-scale purifications were attempted for 15 of the proteins using the additives identified and eight (40%) were prepared for crystallization trials during the first purification attempt. Thus, this protocol allowed us to recover about a third of seemingly insoluble proteins for crystallography and structure determination. If recombinant proteins are required in smaller quantities or less purity, the final success rate may be even higher.     

Rapid and efficient selection of recombinant site-directed mutants of Bradyrhizobium japonicum by colony hybridization

Abstract Due to the high incidence of spontaneous antibiotic resistance and slow growth of Bradyrhizobium japonicum strains, screening for site-directed mutants is cumbersome and time-consuming. A rapid method for selection of recombinant site-directed mutants of B. japonicum was developed. A kanamycin (Km) and a spectinomycin (Sp) cassette were each used to replace DNA fragments in the chromosome by homologous recombination. The primary new features of this method involve a simple plate selection for the antibiotic (Km or Sp) resistant mutants, then colony streaking, and lysis for DNA hybridization on a nitrocellulose filter enabling direct identification of the recombinant site-directed mutants. This method has permitted us to quickly and easily identify a large number of positive recombinant mutants from a large number of indicidual colonies. The procedure eliminates the need to first isolate genomic DNA from each mutant for Southern hybridization. All of the tested site-directed mutants from this method were confirmed to exhibit the expected mutant phenotype.     

Replica filter assay of human beta-adrenergic receptors expressed in E.coli

We have developed a replica filter assay that permits the direct identification of bacterial colonies expressing membrane receptors. E.coli transformed with appropriate phage or plasmid vectors containing human beta-adrenergic receptor cDNAs were grown on LB/agar plates. Bacterial colonies transferred onto nitrocellulose filters showed specific [125I]-iodocyanopindolol binding. beta-adrenergic receptors expressed in bacteria retained their pharmacological properties when transferred onto filters. This strategy, which is considerably simplified and more rapid compared to similar methods based upon expression of receptor genes in eukaryotic cells, may be a useful tool for cloning membrane receptors.     

Engineering membrane protein overproduction in Escherichia coli

Membrane proteins play a fundamental role in human disease and therapy, but suffer from a lack of structural and functional information compared to their soluble counterparts. The paucity of membrane protein structures is primarily due to the unparalleled difficulties in obtaining detergent-solubilized membrane proteins at sufficient levels and quality. We have developed an in vitro evolution strategy for optimizing the levels of detergent-solubilized membrane protein that can be overexpressed and purified from recombinant Escherichia coli. Libraries of random mutants for nine membrane proteins were screened for expression using a novel implementation of the colony filtration blot. In only one cycle of directed evolution were significant improvements of membrane protein yield obtained for five out of nine proteins. In one case, the yield of detergent-solubilized membrane protein was increased 40-fold.     

A high-throughput screening for phosphatases using specific substrates

A high-throughput screening was developed for the detection of phosphatase activity in bacterial colonies. Unlike other methods, the current procedure can be applied to any phosphatase because it uses physiological substrates and detects the compelled product of all phosphatase reactions, that is, orthophosphate. In this method, substrates diffuse from a filter paper across a nitrocellulose membrane to bacterial colonies situated on the opposite face, and then reaction products flow back to the paper. Finally, a colorimetric reagent discloses the presence of orthophosphate in the filter paper. We validated the performance of this assay with several substrates and experimental conditions and with different phosphatases, including a library of randomly mutagenized rapeseed chloroplast fructose-1,6-bisphosphatase. This procedure could be extended to other enzymatic activities provided that an appropriate detection of reaction products is available.     

Semi-quantitative colony immunoassay for determining and optimizing protein expression in Saccharomyces cerevisiae and Escherichia coli

This work describes a quick semi-quantitative colony immunoassay (QSCI) method for immunoblot detection of intracellularly expressed proteins in both yeast and bacterial cells. After induction of protein expression, only 4.5 h is required for cell breakage, protein detection, and data analysis. This protocol was used to screen and unambiguously identify Saccharomyces cerevisiae cells efficiently overexpressing glutathione S-transferase (GST)-tagged Yih1 in addition to cells expressing the myc-tagged large 297-kDa Gcn1 protein. In addition, the method was used to identify Escherichia coli cells efficiently expressing His6-tagged Yih1 and a GST-tagged Gcn1 fragment, respectively. The protocol allows the use of both epitope-specific and protein-specific antibodies. The same colony immunoassay can also be used to determine the minimal concentration of inducing agent sufficient for induction of optimal protein expression (e.g., galactose for yeast, isopropyl β-d-1-thiogalactopyranoside [IPTG] for E. coli). To our knowledge, this is the first report on a rapid low-cost procedure that allows the calibration of inducing agent on solid medium.     

Conjugative Plasmid in Corynebacterium flaccumfaciens subsp. oortii That Confers Resistance to Arsenite, Arsenate, and Antimony(III)

The membrane filter (MF) method for detection and enumeration of coliform bacteria in drinking water requires that the coliforms both grow and produce a green metallic sheen when the filter is incubated on modified Endo medium at 35 degrees C for 22 h. Large numbers of noncoliform bacteria, which are enumerated by the standard plate count (SPC) technique, can interfere with the detection of coliforms on MF. This paper presents quantitative evidence from laboratory experiments on the interference of specific SPC bacteria on coliform colony sheen production on MF. Pseudomonas aeruginosa and Aeromonas hydrophila caused significant reductions in Escherichia coli sheen colony counts when present at 3,000 and 220 per filter, respectively. The Flavobacterium sp. and Bacillus sp. selected for this study from SPC did not interfere with coliform colony sheen production. Excessive crowding of E. coli and Enterobacter cloacae colonies on MF also caused a reduction in the number of colonies that produced sheen. Even when there was no crowding (14 colonies per filter), only a fraction of the E. cloacae colonies produced sheen colonies on modified Endo medium.     

Quantitative assay of the binding of small molecules to protein: comparison of dialysis and membrane filter assays

A rapid assay involving filtration through a nitrocellulose filter is described for the quantitative detection of a protein which specifically and reversibly binds a small molecule. This assay is quantitatively characterized by direct comparison with equilibrium dialysis. The filtration assay is highly sensitive and reproducible when applied to the binding of histidine by the J protein, a component of histidine transport. The effects of several variables on this method are examined. Also, an equilibrium dialysis procedure designed for optimal sensitivity and range in the assay of proteins by binding activity is described.