Fabrication of Micro-tissues using Modules of Collagen Gel Containing Cells

This protocol describes the fabrication of a type of micro-tissues called modules. The module approach generates uniform, scalable and vascularized tissues. The modules can be made of collagen as well as other gelable or crosslinkable materials. They are approximately 2 mm in length and 0.7 mm in diameter upon fabrication but shrink in size with embedded cells or when the modules are coated with endothelial cells. The modules individually are small enough that the embedded cells are within the diffusion limit of oxygen and other nutrients but modules can be packed together to form larger tissues that are perfusable. These tissues are modular in construction because different cell types can be embedded in or coated on the modules before they are packed together to form complex tissues. There are three main steps to making the modules: (1) neutralizing the collagen and embedding cells in it, (2) gelling the collagen in the tube and cutting the modules and (3) coating the modules with endothelial cells.Download video file.^{(58M, mov)}     

A Holder for Simultaneous Fluid Processing or Carbon Coating of Electron Microscope Grids in Lots of 10 or More

A piece of polyethylene tubing about 14 cm long, ID 3 mm and with a 1.5 mm wall is shaped to hold grids in a linear series as follows. A series of pairs of transverse cuts I mm apart are made across and about $3/4 through the tubing at intervals of 1 cm. After making diagonal cuts on either side of each pair of cuts, wedge-shaped pieces of tubing are removed to leave free-standing 1 mm widths of the tubing wall. Each arch of wall is then bisected by a cut in the longitudinal direction of the tubing, thus providing the jaws of a clamp for a grid. By spreading the jaws with forceps, the grid can be inserted. On removal of the forceps, the grid is held firmly and when the holder is filled, the grids face in a direction perpendicular to its long dimension. By inserting a piece of glass tubing into the lumen of the holder, it is held straight and can be placed in a test tube for fluid processing. Stains or other fluids can be introduced through the glass tube, thus allowing fluid changes without exposure to air. Carbon coating can be achieved without removing the grids, since they all face the same way. For convenience in loading and unloading, the holder can be temporarily attached to a base with double-coated adhesive tape.     

Complexity generated by iteration of hierarchical modules in bryozoa

Growth in colonial organisms by iteration of modules inherently provides for an increase in available morpho-ecospace relative to their solitary relatives. Therefore, the interpretation of the functional or evolutionary significance of complexity within groups that exhibit modular growth may need to be considered under criteria modified from those used to interpret complexity in solitary organisms. Primary modules, corresponding to individuals, are the fundamental building blocks of a colonial organism. Groups of primary modules commonly form a second-order modular unit, such as a branch, which may then be iterated to form a more complex colony. Aspects of overall colony form, along with their implications for ecology and evolution, are reflected in second-order modular (structural) units to a far greater degree than by primary modular units (zooids). A colony generated by modular growth can be classified by identifying its second-order modular (structural) unit and then by characterizing the nature and relationships of these iterated units within the colony. This approach to classifying modular growth habits provides a standardized terminology and allows for direct comparison of a suite of functionally analogous character states among taxa with specific parameters of their ecology.     

Fetal wound healing: a biochemical study of scarless healing

Human fetal surgery is being successfully performed today in a small number of highly selected patients for conditions that may lead to irreversible damage to the fetus and threaten the viability of the newborn. Following surgical repair, fetal wounds heal without scarring. This study was initiated to characterize fetal wounds both histologically and biochemically. Gore-Tex tubing was implanted into the subcutaneous tissue of the back of fetal, newborn, and adult New Zealand white rabbits. Light microscopic examination of healed wounds revealed no evidence of scar formation. Electron microscopy demonstrated a striated fibrillar structure suggestive of collagen within the lumen of the Gore-Tex tubing implants. Amino acid analysis (sensitivity 40 pmol) confirmed the presence of hydroxylysine and hydroxyproline within the Gore-Tex wound chambers indicating the presence of collagen in fetal wounds. The small amount of collagen precluded the typing of the collagen using cyanogen bromide peptide analysis. The absence of scarring and the small amounts of detectable collagen suggest a high degree of reorganization of the connective tissues involved in repair. The fetal wound matrix is rich in hyaluronic acid. Topical hyaluronic acid has been associated experimentally with a reduced amount of scarring in postnatal wound healing. Hyaluronic acid extracted from human skin and scar tissue is associated with collagen and other proteins. We propose that a hyaluronic acid-collagen-protein complex may play a role in fetal wound healing.     

Influence of serum level,cell line,flow type and viscosity on flow-induced lysis of suspended mammalian cells

An investigation was conducted of the parametric dependence of cell lysis observed when mammalian cells growing in suspension are subjected intermittently to intense hydrodynamic forces. Two flow devices were tested: one consisting of a sudden contraction into a short length of capillary tubing, in which turbulent flow is obtained, and another consisting of a smoothly converging and diverging tube, in which laminar flow is obtained. Changes in the cell line and the serum level in which the cells were grown and subjected to flow trauma both affected the specific lysis rate (fraction of cells lysed per pass through the flow device) in the turbulent flow device. The threshold value of the average wall shear stress level was approximately the same in the turbulent and laminar flow devices (1500–1800 dyn/cm²). Increasing the viscosity of the medium with 70,000 MW dextran had no effect on the specific lysis rate in either flow device.     

The role of calponin in the gene profile of metastatic cells: inhibition of metastatic cell motility by multiple calponin repeats

Metastasis of diseased cells is the basic event leading to death in individuals with cancer. Establishment of metastasis requires that tumour cells migrate from the site of the primary tumour into the circulation system, escape from the vasculature and form secondary tumours at novel sites. These processes depend to a large degree on cytoskeletal remodeling. We show here that multiple copies of the short actin-binding module CLIK(23) from human or Caenorhabditis elegans calponin proteins effectively inhibit cell motility on two dimensional matrices and suppress soft agar colony formation of metastatic melanoma and adenocarcinoma cells of murine and human origin. Ectopic expression of CLIK(23) modules for 30 days results in the formation of multinucleated cells. The repeat displays true modular behaviour, resulting in increased cytoskeletal effects in direct correlation with the increase in number of modules. Our results demonstrate that the role of calponin in the signature profile of metastasising cells is that of a mechanical stabiliser of the actin cytoskeleton, which interferes with actin turnover by binding at a unique interface along the actin filament.     

A Glycosaminoglycan Based,Modular Tissue Scaffold System for Rapid Assembly of Perfusable,High Cell Density,Engineered Tissues

The limited ability to vascularize and perfuse thick, cell-laden tissue constructs has hindered efforts to engineer complex tissues and organs, including liver, heart and kidney. The emerging field of modular tissue engineering aims to address this limitation by fabricating constructs from the bottom up, with the objective of recreating native tissue architecture and promoting extensive vascularization. In this paper, we report the elements of a simple yet efficient method for fabricating vascularized tissue constructs by fusing biodegradable microcapsules with tunable interior environments. Parenchymal cells of various types, (i.e. trophoblasts, vascular smooth muscle cells, hepatocytes) were suspended in glycosaminoglycan (GAG) solutions (4%/1.5% chondroitin sulfate/carboxymethyl cellulose, or 1.5 wt% hyaluronan) and encapsulated by forming chitosan-GAG polyelectrolyte complex membranes around droplets of the cell suspension. The interior capsule environment could be further tuned by blending collagen with or suspending microcarriers in the GAG solution These capsule modules were seeded externally with vascular endothelial cells (VEC), and subsequently fused into tissue constructs possessing VEC-lined, inter-capsule channels. The microcapsules supported high density growth achieving clinically significant cell densities. Fusion of the endothelialized, capsules generated three dimensional constructs with an embedded network of interconnected channels that enabled long-term perfusion culture of the construct. A prototype, engineered liver tissue, formed by fusion of hepatocyte-containing capsules exhibited urea synthesis rates and albumin synthesis rates comparable to standard collagen sandwich hepatocyte cultures. The capsule based, modular approach described here has the potential to allow rapid assembly of tissue constructs with clinically significant cell densities, uniform cell distribution, and endothelialized, perfusable channels.     

Cardiac cells implanted into a cylindrical,vascularized chamber in vivo: pressure generation and morphology

We have previously described a model to implant dissociated cells into a cylindrical, vascularized bed in vivo to promote the formation of functional cardiac muscle constructs. We now investigate the cellular organization and the ability of the constructs to generate intra-luminal pressure. Primary cardiac cells were isolated from hearts of 2–3 day old rats, suspended in fibrin gel and inserted into the lumen of silicone tubing. The silicone tubing was then implanted around the femoral vessels in the groin region of recipient animals. After 3 weeks, the constructs were harvested, placed in an in vitro bath and cannulated via the incorporated femoral artery with a pressure transducer for evaluation of intra-luminal pressure dynamics. Histological evaluation showed the presence of a concentric ring of cardiac cells surrounding the femoral vessels. There was also a significant amount of collagen present around cardiac cells. In addition, we observed a significant amount of neovascularization of the explanted constructs. Electron microscopy showed the presence of longitudinally aligned fibers with a large number of gap junctions. Upon electrical stimulation of a single pulse (7 V, 1.2 ms), the constructs generated an intra-luminal pressure of 1.19 ± 0.45 mmHg (n = 6). In addition, we were able to electrically pace the constructs at frequencies of 0.5–5 Hz. A Starling behavior of the inverse relation between baseline pressure and twitch pressure was observed. Cardiac cells implanted for 3 weeks into the cylindrical vascularized bed formed a tissue construct that demonstrated many of the contractile properties and morphology expected of functioning cardiac tissues.     

Transplantation of pancreatic islets into the kidney capsule of diabetic mice

Our protocol was developed to cleanly and easily deliver islets or cells under the kidney capsule of diabetic or normal mice. We found that it was easier to concentrate the islets or cells into pellets in the final delivery tubing (PE50) used to transplant the cells under the kidney capsule. This technique provides both speed and ease while reducing any undue stress to the cells or to the mouse. LOADING: Settled, hand picked, islets or pelleted cells are carefully aspirated off the bottom of a 1.5 mL microcentrifuge tube using a p200 pipetteman and a straight, thin-wall pipette tip. A length of PE50 tubing is attached to the pipette tip using a small silicone adapter tubing. Cells are allowed to settle, in the tip, and then are transferred to the PE50 tubing by slowly dialing the pipetteman. Once the cells are near the end of the PE50 tubing, a kink is made and the silicone adaptor tubing is placed over the kink. The PE50 tubing is transferred to a 15 mL conical containing a cut 5 mL pipet, and the PE50 tubing is taped over the side of the 5 mL pipet to prevent curling during centrifuging. Cells are allowed to reach 1,000 rpm and stopped. TRANSPLANTATION: Recipient mice are anesthetized, shaved, and cleaned. A small incision is made on the left flank of the mouse and the kidney is exposed. The kidney, fat, and tissue are kept moist with normal saline swab. The distal end of the PE50 is attached to a Hamilton screw drive syringe, containing a pipette tip, using the silicone adaptor tubing. A small nick is made on the right flank side of the kidney, not too large nor too deep. The beveled end of the PE50 tubing, nearest the cells, is carefully placed under the capsule, the tubing is moved around gently to make space while swabbing normal saline; a dry capsule can tear easily. A small air bubble is delivered under the capsule by slowly dialing the syringe screw drive. Islets are then slowly delivered behind the air bubble. Once the islets have been delivered kidney homeostasis is maintained and the knick is cauterized with low heat. The kidney is placed back into the cavity and the peritoneum and skin are sutured and stapled. Mice are immediately treated with Flunixin and Buprenorphine s.q. and placed in a cage on a heating pad.     

Intracellular mechanisms involved in basement membrane induced blood vessel differentiation in vitro

Summary The extracellular matrix, particularly basement membranes, plays an important role in angiogenesis (blood vessel formation). Previous work has demonstrated that a basement membranelike substrate (Matrigel) induces human umbilical vein endothelial cells to rapidly form vessel-like tubes (Kubota, et al., 1988; Grant et al., 1989b); however, the precise mechanism of tube formation is unclear. Using this in vitro model, we have investigated morphologic changes occurring during tube formation and the cytoskeletal and protein synthesis requirements of this process. Electron microscopy showed that endothelial cells attach to the Matrigel surface, align, and form cylindrical structures that contain a lumen and polarized cytoplasmic organelles. The cytoskeleton is reorganized into bundles of actin filaments oriented along the axis of the tubes and is located at the periphery of the cells. The addition of colchicine or cytochalasin D blocked tube formation, indicating that both microfilaments and microtubules are involved in this process. Cycloheximide blocked tube formation by 100%, indicating that the process also required protein synthesis. In particular, collagen synthesis seems to be required for tube formation because cis-hydroxyproline inhibited tube formation, whereas either the presence of ascorbic acid or the addition of exogenous collagen IV to the Matrigel increased tube formation. Our results indicate that endothelial cell attachment to Matrigel induces the reorganization of the cytoskeleton and elicits the synthesis of specific proteins required for the differentiated phenotype of the cells.     

A spectrum of modularity in multi‐functional gene circuits

A major challenge in systems biology is to understand the relationship between a circuit's structure and its function, but how is this relationship affected if the circuit must perform multiple distinct functions within the same organism? In particular, to what extent do multi‐functional circuits contain modules which reflect the different functions? Here, we computationally survey a range of bi‐functional circuits which show no simple structural modularity: They can switch between two qualitatively distinct functions, while both functions depend on all genes of the circuit. Our analysis reveals two distinct classes: hybrid circuits which overlay two simpler mono‐functional sub‐circuits within their circuitry, and emergent circuits, which do not. In this second class, the bi‐functionality emerges from more complex designs which are not fully decomposable into distinct modules and are consequently less intuitive to predict or understand. These non‐intuitive emergent circuits are just as robust as their hybrid counterparts, and we therefore suggest that the common bias toward studying modular systems may hinder our understanding of real biological circuits.     

A general model for selection among modules in haplo-diploid life histories

Genetic variation resulting from changes during somatic development in modular organisms may be inherited by subsequent generations due to the late development of their germ line. As a consequence, both sexually and asexually produced offspring may be genetically variable. The presence of heritable intraclonal variation and the great life history variation among modular organisms requires that evolutionary theory does not limit selection to only that occurring among individuals resulting from meiosis and zygote formation. To allow for variation within clonal lineages, and encompass a wide variety of life histories, we construct a simple model of selection among modules in life histories that contain both haploid and diploid phases, such as that seen among many multicellular algae. Selection among modules is a demographic process with module performance depending on its genotype at a single locus with two alleles. The model is used to simulate the spread of a beneficial allele in life histories that vary in the relative amount of sexual and asexual reproduction. The time taken for allele fixation is shown to depend on both demographic and genetic factors.     

Behavior of a viscoelastic valveless pump: a simple theory with experimental validation

Background  

A valveless pump generates a unidirectional net flow of fluid around a closed loop of soft viscoelastic tubing that is rhythmically compressed at one point. The tubing must have at least two sections with two different stiffnesses. When a short segment of the tube is squeezed asymmetrically at certain frequencies, net flow of fluid around the loop can occur without valves.     

Influence of collagen gel on the orientation of epithelial cell polarity: follicle formation from isolated thyroid cells and from preformed monolayers

The influence of collagen gels on the orientation of the polarity of epithelial thyroid cells in culture was studied under four different conditions. (a) Isolated cells cultured on the surface of a collagen gel formed a monolayer. The apical pole was in contact with the culture medium and the basal membrane was attached to the substratum. (b) Isolated cells embedded inside the gel organized within 8 into follicles. The basal pole was in contact with collagen and the apical pole was oriented towards the interior of the follicular lumen. (c) Cells were first organized into floating vesicles, structures in which the apical surface is in contact with the culture medium, and the vesicles were embedded inside the collagen gel. After 3 d, cell polarity was inverted, the apical pole being oriented towards the cavity encompassed by cells. Vesicles had been transformed into follicles. (d) Monolayers formed on collagen gels as in a were overlaid with a second layer of collagen, which was polymerized in contact with the apical cell surface. A disorganization of the continuous pavement occurred within 24 h; cells attached to the upper layer of collagen and reorganized into follicles in the collagen sandwich within 4-8 d. A similar process occurred when the monolayer was grown on plastic and overlaid with collagen, or grown on collagen and covered with small pieces of glass cover slips. No reorganization was observed between two glass surfaces. In conclusion, first, a basal pole was always formed in the area of contact between the cell membrane and an adhesive surface and, second, the interaction of a preformed apical pole with an adhesive surface was not compatible with the stability of this domain of the plasma membrane. The interaction of the cell membrane with extracellular components having adhesive properties appears to be a determinant factor in the orientation and stabilization of epithelial cell polarity.     

Surgical techniques for long-term studies of thoracic duct circulation in the rat.

Two techniques for cannulation of the thoracic duct in the rat, thoracic duct shunt and thoracic duct side fistula, are described. They give access, for repetitive sampling, to a normal thoracic duct circulation and are suited for study of the circulation under physiologic conditions. The thoracic duct shunt creates, with tubing, a shunt between the caudad and cephalad ends to the cisterna chyli. The exteriorized midportion of the shunt allows observation of the lymph. In the thoracic duct side fistula, the short arm of a T tube is placed within the cisterna and sampling is done via the long arm of the tube. Ten shunts functioned for 8-26 days and 10 side fistulas functioned for 8-30 days. Average lymph flow was 0.044 ml/min (shunts) and 0.042 ml/min (side fistulas). Average thoracic duct lymphocyte output was 1,729,000 cells/min (shunts) and 2,310,000 cells/min (side fistulas). Average blood lymphocyte count was 11,700 cells/mm3 (shunts) and 12,600 cells/mm3 (side fistulas). All parameters remained stable during the period of study. Advantages of those techniques over the Bollman end fistula are presented.     

Fine Structure of Heart,Pericardium and Glomerular Vessel in Cephalodiscus gracilis M'Intosh, 1882 (Pterobranchia,Hemichordata)

Heart, pericardium and glomerular vessel of Cephalodiscus gracilis have been studied with the electron microscope. The lumen of the heart is lined by a basal lamina and an associated epithelium, composed of myoepithelial cells with well developed thin and thick myofilaments. The heart is located in the pericardial cavity, which is deliminated by the pericardium. The latter is composed of two flat layers of myoepithelia with fused basal laminae. The outer layer of the pericardium is the protocoelomic lining, and the inner layer is the ‘parietal’ pericardial epithelium. The myoepithelium forming the heart wall can be considered to represent the ‘visceral’ pericardial epithelium. The spacious glomerular vessel is lined by a basal lamina, on which typical podocytes rest. These cells indicate that ultrafiltration takes place through the wall of the glomerular vessel. The lumen of the vessel contains fine granular material (presumably precipitated blood proteins), fibrils with a faint cross striation, suggesting that they represent collagen, and stellate cells, which in part line the vessel. Since ultrafiltration requires hydrostatic pressure, it is inferred that the blood flow is from the dorsal region then through the heart and into the glomerular vessel.     

Scaffold architecture determines chondrocyte response to externally applied dynamic compression

It remains unclear how specific mechanical signals generated by applied dynamic compression (DC) regulate chondrocyte biosynthetic activity. It has previously been suggested that DC-induced interstitial fluid flow positively impacts cartilage-specific matrix production. Modifying fluid flow within dynamically compressed hydrogels therefore represents a promising approach to controlling chondrocyte behavior, which could potentially be achieved by changing the construct architecture. The objective of this study was to first determine the influence of construct architecture on the mechanical environment within dynamically compressed agarose hydrogels using finite element (FE) modeling and to then investigate how chondrocytes would respond to this altered environment. To modify construct architecture, an array of channels was introduced into the hydrogels. Increased magnitudes of fluid flow were predicted in the periphery of dynamically compressed solid hydrogels and also around the channels in the dynamically compressed channeled hydrogels. DC was found to significantly increase sGAG synthesis in solid constructs, which could be attributed at least in part to an increase in DNA. DC was also found to preferentially increase collagen accumulation in regions of solid and channeled constructs where FE modeling predicted higher levels of fluid flow, suggesting that this stimulus is important for promoting collagen production by chondrocytes embedded in agarose gels. In conclusion, this study demonstrates how the architecture of cell-seeded scaffolds or hydrogels can be modified to alter the spatial levels of biophysical cues throughout the construct, leading to greater collagen accumulation throughout the engineered tissue rather than preferentially in the construct periphery. This system also provides a novel approach to investigate how chondrocytes respond to altered levels of biophysical stimulation.     

Role of laminin and basement membrane in the morphological differentiation of human endothelial cells into capillary-like structures

We have defined a signal responsible for the morphological differentiation of human umbilical vein and human dermal microvascular endothelial cells in vitro. We find that human umbilical vein endothelial cells deprived of growth factors undergo morphological differentiation with tube formation after 6-12 wk, and that human dermal microvascular endothelial cells differentiate after 1 wk of growth factor deprivation. Here, we report that morphological differentiation of both types of endothelial cells is markedly accelerated by culture on a reconstituted gel composed of basement membrane proteins. Under these conditions, tube formation begins in 1-2 h and is complete by 24 h. The tubes are maintained for greater than 2 wk. Little or no proliferation occurs under these conditions, although the cells, when trypsinized and replated on fibronectin-coated tissue culture dishes, resume division. Ultrastructurally, the tubes possess a lumen surrounded by endothelial cells attached to one another by junctional complexes. The cells possess Weibel-Palade bodies and factor VIII-related antigens, and take up acetylated low density lipoproteins. Tubule formation does not occur on tissue culture plastic coated with laminin or collagen IV, either alone or in combination, or on an agarose or a collagen I gel. However, endothelial cells cultured on a collagen I gel supplemented with laminin form tubules, while supplementation with collagen IV induces a lesser degree of tubule formation. Preincubation of endothelial cells with antibodies to laminin prevented tubule formation while antibodies to collagen IV were less inhibitory. Preincubation of endothelial cells with synthetic peptides derived from the laminin B1 chain that bind to the laminin cell surface receptor or incorporation of these peptides into the gel matrix blocked tubule formation, whereas control peptides did not. These observations indicate that endothelial cells can rapidly differentiate on a basement membrane-like matrix and that laminin is the principal factor in inducing this change.     

Development of a bioreactor for evaluating novel nerve conduits

We describe an experimental closed bioreactor device for studying novel tissue engineered peripheral nerve conduits in vitro. The system integrates a closed loop system consisting of one, two, or three experimental nerve conduits connected in series or parallel, with the ability to study novel scaffolds within guidance conduits. The system was established using aligned synthetic microfiber scaffolds of viscose rayon and electrospun polystyrene. Schwann cells were seeded directly into conduits varying from 10 to 80 mm in length and allowed to adhere under 0 flow for 1 h, before being cultured for 4 days under static or continuous flow conditions. In situ viability measurements showed the distribution of live Schwann cells within each conduit and enabled quantification thereafter. Under static culture viable cells only existed in short conduit scaffolds (10 mm) or at the ends of longer conduits (20-80 mm) with a variation in viable cell distribution. Surface modification of scaffold fibers with type-1 collagen or acrylic acid increased cell number by 17% and 30%, respectively. However, a continuous medium flow of 0.8 mL/h was found to increase total cell number by 2.5-fold verses static culture. Importantly, under these conditions parallel viability measurements revealed a ninefold increase compared to static culture. Fluorescence microscopy of scaffolds showed cellular adhesion and alignment on the longitudinal axis. We suggest that such a system will enable a rigorous and controlled approach for evaluating novel conduits for peripheral nerve repair, in particular using hydrolysable materials for the parallel organization of nerve support cells, prior to in vivo study.     

Generation of variants of a motor act in a modular and hierarchical motor network

BACKGROUND: Most motor systems can generate a variety of behaviors, including categorically different behaviors and variants of a single motor act within the same behavioral category. Previous work indicated that many pattern-generating interneuronal networks may have a modular organization and that distinct categories of behaviors can be generated through flexible combinations of a small number of modules or building blocks. However, it is unclear whether and how a small number of modules could possibly generate a large number of variants of one behavior. RESULTS: We show that the modular feeding motor network of Aplysia mediates variations in protraction duration in biting-like programs. Two descending commands are active during biting behavior and trigger biting-like responses in a semiintact preparation. In the isolated CNS, when activated alone, the two commands produce biting-like programs of either long or short protraction duration by acting specifically on two modules that have opposite effects on protraction duration. More importantly, when coactivated at different frequencies, the two commands produce biting programs with an intermediate protraction duration. CONCLUSIONS: It was previously hypothesized that behavioral variants may be produced by combining different activity levels of multiple descending commands. Our data provide direct evidence for such a scheme and show how it is implemented in a modularly organized network. Thus, within a modular and hierarchical architecture, in addition to generating different categories of behavior, a small number of modules also efficiently implements variants of a single behavior.