Silver glyconanoparticles functionalized with sugars of sweet sorghum syrup as an antimicrobial agent

Bio-directed synthesis of metal nanoparticles is gaining importance due to their biocompatibility, low toxicity and eco-friendly nature. We used sweet sorghum syrup for a facile and cost-effective green synthesis of silver glyconanoparticles. Silver nanoparticles were formed due to reduction of silver ions when silver nitrate solution was treated with sorghum syrup solutions of different pH values. The nanoparticles were characterized by UV–vis, TEM (transmission electron microscopy), DLS (dynamic light scattering), EDAX (energy dispersive X-ray spectroscopy), FT-IR (fourier transform infrared spectroscopy) and XRD (X-ray diffraction spectroscopy). The silver glyconanoparticles exhibited a characteristic surface plasmon resonance around 385 nm. At pH 8.5, the nanoparticles were mono-dispersed and spherical in shape with average particle size of 11.2 nm. The XRD and SAED studies suggested that the nanoparticles were crystalline in nature. EDAX analysis showed the presence of elemental silver signal in the synthesized glyconanoparticles. FT-IR analysis revealed that glucose, fructose and sucrose present in sorghum syrup acted as capping ligands. Silver glyconanoparticles prepared at pH 8.5 had a zeta potential of ?28.9 mV and were anionic charged. They exhibited strong antimicrobial activity against Gram-positive, Gram-negative and different Candida species at MIC values ranging between 2 and 32 μg ml^?1. This is first report on sweet sorghum syrup sugars-derived silver glyconanoparticles with antimicrobial property.     

Green synthesis of lead sulfide nanoparticles by the lead resistant marine yeast, Rhodosporidium diobovatum

Biosynthesis of nanoparticles using microorganisms has attracted a lot of attention in recent years as this route has the potential to lead to synthesis of monodisperse nanoparticles. Here, we report the intracellular synthesis of stable lead sulfide nanoparticles by a marine yeast, Rhodosporidium diobovatum. The PbS nanoparticles were characterized by UV-visible absorption spectroscopy, X-ray diffraction (XRD) and energy dispersive atomic spectroscopy (EDAX). UV-visible absorption scan revealed a peak at 320 nm, a characteristic of the nanosize range. XRD confirmed the presence of PbS nanoparticles of cubic structure. Crystallite size as determined from transmission electron microscopy was found to be in the range of 2-5 nm. Elemental analysis by EDAX revealed the presence of particles composed of lead and sulfur in a 1:2 ratio indicating that PbS nanoparticles were capped by a sulfur-rich peptide. A quantitative study of lead uptake through atomic absorption spectrometry revealed that 55% of lead in the medium was accumulated in the exponential phase, whereas a further 35% was accumulated in the stationary phase; thus, the overall recovery of PbS nanoparticles was 90%. The lead-exposed yeast displayed a marked increase (280% over the control) in nonprotein thiols in the stationary phase.     

Biosynthesis of silver and gold nanoparticles using thermophilic bacterium Geobacillus stearothermophilus

Nanomaterials have assumed a great deal of importance as they often display unique and considerably modified physical, chemical and biological properties as compared to their counterparts of the macroscale. In this study, biogenic synthesis of silver and gold nanoparticles by Geobacillus stearothermophilus has been attempted. The exposure of G. stearothermophilus cell free extract to the metal salts leads to the formation of stable silver and gold nanoparticles in the solution. These nanoparticles were characterized by UV–Vis spectra, FTIR, TEM, and XRD. The silver and gold nanoparticles have absorption maxima at 423 nm and 522 nm respectively. The TEM micrograph revealed the formation of polydispersed particles in the case of silver nanoparticles and monodispersed particles with respect to the gold nanoparticles. High stability of the nanoparticle solution could be attributed to the secretion of certain capping proteins by the bacterium in the reaction mixture. The involvement of these proteins was confirmed by FTIR and SDS PAGE.     

Biosynthesis of fluorescent gold nanoparticles using an edible freshwater red alga,Lemanea fluviatilis (L.) C.Ag. and antioxidant activity of biomatrix loaded nanoparticles

Biosynthesis of gold nanoparticles has been accomplished via reduction of an aqueous chloroauric acid solution with the dried biomass of an edible freshwater epilithic red alga, Lemanea fluviatilis (L.) C.Ag., as both reductant and stabilizer. The synthesized nanoparticles were characterized by UV–visible, powder X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR), and dynamic light scattering (DLS) studies. The UV–visible spectrum of the synthesized gold nanoparticles showed the surface plasmon resonance (SPR) at around 530 nm. The powder XRD pattern furnished evidence for the formation of face-centered cubic structure of gold having average crystallite size 5.9 nm. The TEM images showed the nanoparticles to be polydispersed, nearly spherical in shape and have sizes in the range 5–15 nm. The photoluminescence spectrum of the gold nanoparticles excited at 300 nm showed blue emission at around 440 nm. Gold nanoparticles loaded within the biomatrix studied using a modified 2,2-diphenyl-1-picrylhydrazyl (DPPH) method exhibited pronounced antioxidant activity.     

Fungus-Mediated Preferential Bioleaching of Waste Material Such as Fly - Ash as a Means of Producing Extracellular,Protein Capped,Fluorescent and Water Soluble Silica Nanoparticles

In this paper, we for the first time show the ability of the mesophilic fungus Fusarium oxysporum in the bioleaching of waste material such as Fly-ash for the extracellular production of highly crystalline and highly stable, protein capped, fluorescent and water soluble silica nanoparticles at ambient conditions. When the fungus Fusarium oxysporum is exposed to Fly-ash, it is capable of selectively leaching out silica nanoparticles of quasi-spherical morphology within 24 h of reaction. These silica nanoparticles have been completely characterized by UV-vis spectroscopy, Photoluminescence (PL), Transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and Energy dispersive analysis of X-rays (EDAX).     

Green synthesis of metal oxide nanoparticles and their catalytic activity for the reduction of aldehydes

In the present work, a green synthesis of Metal Oxide nanoparticles was demonstrated using the freshly prepared aqueous extract of the immature fruit of Cocos nucifera and the MO nanoparticles were characterized by the analytical techniques such as UV–vis, FT-IR, XRD, SEM, TEM and EDAX. Characterization techniques confirmed that the biomolecules involved in the formation of nanoparticles and also they stabilized the nanoparticles. The synthesized MO nanoparticles were used as catalysts for the reduction of aromatic aldehydes. The reduction was done at mild reaction conditions using ammonium formate as a green hydrogen donor and the corresponding alcohols were obtained in 2–24 h with excellent yields. The reduction reaction was optimized using various solvents, loading of catalyst and at different temperatures.     

Structure and composition of teleost scales from snakehead Channa argus (Cantor) (Perciformes: Channidae)

The structure of teleost scales from snakehead Channa argus was investigated using thermogravimetric analysis (TG), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive analysis of X-rays (EDAX), Fourier transform infra-red spectroscopy (FTIR) and X-ray diffraction (XRD). Thermal treatment of fish scales indicates that the fibrillary plate is partially calcified. SEM shows two kinds of scale denticles, arranged along the circuli in the anterior field and the lateral fields, respectively. TEM indicates the stratum laxum with abundant fibrils, chromatophores and capillary blood vessels within the scale covering, and shows the fibrillary plate as an 'orthogonal plywood structure' of stratified lamellae, consisting of 80–100 nm diameter collagen fibres co-aligned in individual lamellae and alternated by c. 90° of the fibre alignment between adjacent lamellae. EDAX, FTIR and XRD show that the mineral phase of the scales is a carbonated hydroxyapatite with a Ca:P molar ratio of 1·85.     

Mycocrystallization of gold ions by the fungus Cylindrocladium floridanum

The size and morphology determines the thermodynamic, physical and electronic properties of metal nanoparticles. The extracellular synthesis of gold nanoparticles by fungus, Cylindrocladium floridanum, which acts as a source of reducing and stabilizing agent has been described. The synthesized nanoparticles were characterized using techniques such as UV–Vis spectroscopy, X-ray diffraction (XRD), scanning electron microscopy, energy dispersive X-ray analysis (EDAX), and high-resolution transmission electron microscopy (HR-TEM). Based on the evidence of HR-TEM, the synthesized particles were found to be spherical with an average size of 19.05 nm. Powder XRD pattern proved the formation of (111)-oriented face-centered cubic crystals of metallic gold. This microbial approach by fungus for the green synthesis of spherical gold nanoparticles has many advantages such as economic viability, scaling up and environment friendliness.     

Biological synthesis of gold nanoparticles using Magnolia kobus and Diopyros kaki leaf extracts

Leaf extracts of two plants, Magnolia kobus and Diopyros kaki, were used for ecofriendly extracellular synthesis of metallic gold nanoparticles. Stable gold nanoparticles were formed by treating an aqueous HAuCl₄ solution using the plant leaf extracts as reducing agents. UV–visible spectroscopy was used for quantification of gold nanoparticle synthesis. Only a few minutes were required for >90% conversion to gold nanoparticles at a reaction temperature of 95 °C, suggesting reaction rates higher or comparable to those of nanoparticle synthesis by chemical methods. The synthesized gold nanoparticles were characterized with inductively coupled plasma spectrometry (ICP), energy-dispersive X-ray spectroscopy (EDS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FTIR), and particle analysis using a particle analyzer. SEM and TEM images showed that a mixture of plate (triangles, pentagons, and hexagons) and spherical structures (size, 5–300 nm) were formed at lower temperatures and leaf broth concentrations, while smaller spherical shapes were obtained at higher temperatures and leaf broth concentrations.     

Synthesis and characterisation of bis(2 methyl-8-hydroxyquinoline) zinc nanoparticles for organic light emitting diode applications

In this paper, bis(2 methyl-8-hydroxyquinoline) zinc (Zn(mq)₂) nanoparticles were synthesised at room temperature by a simple chemical precipitation method. The Zn(mq)₂ nanoparticles were characterised by powder X-ray diffraction (PXRD) analysis to confirm the crystalline nature of the Zn(mq)₂ nanoparticles. The morphology and the elemental composition of Zn (mq)₂ nanoparticles were analysed by high-resolution scanning electron microscopy (HR-SEM) and energy dispersive X-ray analysis (EDAX). The functional groups of the compound were studied with the help of Fourier transform infrared spectroscopy (FTIR) and FT Raman spectroscopy. Further, Zn (mq)₂ nanoparticles were characterised by C-13 NMR spectroscopy, mass spectroscopy and CHN analysis. The thermal stability of the particles was studied using TG-DSC curve. The optical properties of the particles were studied by means of UV–Visible spectroscopy. The luminescence property of the synthesised particles was observed from the photoluminescence spectrum to confirm the possible application in organic light emitting diode.     

Anthelmintic Efficacy of Gold Nanoparticles Derived from a Phytopathogenic Fungus,Nigrospora oryzae

Exploring a green chemistry approach, this study brings to the fore, the anthelmintic efficacy of gold nanoparticles, highlighting the plausible usage of myconanotechnology. Gold nanoparticles of ∼6 to ∼18 nm diameter were synthesized by treating the mycelia-free culture filtrate of the phytopathogenic fungus with gold chloride. Their size and morphology were confirmed by UV-Vis spectroscopy, DLS data, AFM and TEM images. The XRD studies reveal a crystalline nature of the nanoparticles, which are in cubic phase. The FTIR spectroscopic studies before and after the formation of nanoparticles show the presence of possible functional groups responsible for the bio-reduction and capping of the synthesized gold nanoparticles. The latter were tested as vermifugal agents against a model cestode Raillietina sp., an intestinal parasite of domestic fowl. Further, ultrastructural and biochemical parameters were used to corroborate the efficacy study.     

Binding interaction study on human serum albumin with bactericidal gold nanoparticles synthesized from a leaf extract of Musa balbisiana: a multispectroscopic approach

This study describes the eco‐friendly, low‐cost and room‐temperature synthesis of gold nanoparticles from Musa balbisiana leaf extract, which acts as both reducing and stabilizing agent, and characterized by ultraviolet?visible (UV–vis) light spectroscopy, fourier transform infrared (FTIR) spectroscopy, field emission scanning electron microscopy (FE‐SEM), analytical transmission electron microscopy (TEM), energy‐dispersive X‐ray spectroscopy (EDAX) and dynamic light scattering (DLS) instruments. These nanoparticles showed an average diameter of 33.83 ± 3.39 nm, which was confirmed from the size distribution histogram. The bactericidal activity of these nanoparticles was confirmed using bacteria Escherichia coli and Staphylococcus aureus at 1 and 2 nM minimum inhibitory concentrations, respectively. The interaction between nanoparticles and human serum albumin (HSA) was investigated, as this plays significant roles in biological systems. The nature of interaction, binding parameters and structural variation of HSA in the presence of these nanoparticles have been evaluated using several useful spectroscopic approaches such as UV–vis, FTIR, time‐resolved and steady‐state fluorescence, and circular dichroism in addition to the measurement of zeta potential. This interaction study revealed that static quenching occurs in this process with minimal alteration in the secondary structure, but the native structure of HSA remained unaltered. The binding constant and thermodynamic parameters of this interaction process were also evaluated.     

Cytotoxicity and anti-microbial analysis of silver and graphene oxide bio nanoparticles

It is of interest to document the cytotoxicity and anti microbial analysis of silver and graphene oxide nanoparticles. The plant extracts from Andrographis paniculata and Ocimum sanctum Linn were used as reducing agent. The nanoparticles were characterized using UV-visible spectroscopy, FT-IR, XRD and TEM. The antimicrobial activity was completed for oral pathogens. Brine Shrimp Lethality assay was conducted for cytotoxicity. Thus, we show that silver and graphene oxide bio based nanoparticles have antimicrobial activity with minimum cytotoxic effects.     

Biophysical characterization of gold nanoparticles-loaded liposomes

Gold nanoparticles were prepared and loaded into the bilayer of dipalmitoylphosphatidylcholine (DPPC) liposomes, named as gold-loaded liposomes. Biophysical characterization of gold-loaded liposomes was studied by transmission electron microscopy (TEM) and Fourier transform infrared (FTIR) spectroscopy as well as turbidity and rheological measurements. FTIR measurements showed that gold nanoparticles made significant changes in the frequency of the CH₂ stretching bands, revealing that gold nanoparticles increased the number of gauche conformers and create a conformational change within the acyl chains of phospholipids. The transmission electron micrographs (TEM) revealed that gold nanoparticles were loaded in the liposomal bilayer. The zeta potential of DPPC liposomes had a more negative value after incorporating of Au NPs into liposomal membranes. Turbidity studies revealed that the loading of gold nanoparticles into DPPC liposomes results in shifting the temperature of the main phase transition to a lower value. The membrane fluidity of DPPC bilayer was increased by loading the gold nanoparticles as shown from rheological measurements. Knowledge gained in this study may open the door to pursuing liposomes as a viable strategy for Au NPs delivery in many diagnostic and therapeutic applications.     

A Facile Thermal-Treatment Route to Synthesize ZnO Nanosheets and Effect of Calcination Temperature

A facile thermal-treatment route was successfully used to synthesize ZnO nanosheets. Morphological, structural, and optical properties of obtained nanoparticles at different calcination temperatures were studied using various techniques. The FTIR, XRD, EDX, SEM and TEM images confirmed the formation of ZnO nanosheets through calcination in the temperature between 500 to 650°C. The SEM images showed a morphological structure of ZnO nanosheets, which inclined to crumble at higher calcination temperatures. The XRD and FTIR spectra revealed that the samples were amorphous at 30°C but transformed into a crystalline structure during calcination process. The average particle size and degree of crystallinity increased with increasing calcination temperature. The estimated average particle sizes from TEM images were about 23 and 38 nm for the lowest and highest calcination temperature i.e. 500 and 650°C, respectively. The optical properties were determined by UV–Vis reflection spectrophotometer and showed a decrease in the band gap with increasing calcination temperature.     

Green synthesis of gold nanoparticles using Nyctanthes arbortristis flower extract

The present study explores the reducing and capping potentials of ethanolic flower extract of the plant Nyctanthes arbortristis for the synthesis of gold nanoparticles. The extract at different volume fractions were stirred with HAuCl₄ aqueous solution at 80 °C for 30 min. The UV–Vis spectroscopic analysis of the reaction products confirmed successful reduction of Au³⁺ ions to gold nanoparticles. Transmission electron microscope (TEM) revealed dominant spherical morphology of the gold nanoparticles with an average diameter of 19.8 ± 5.0 nm. X-ray diffraction (XRD) study confirmed crystalline nature of the synthesized particles. Fourier transform infra-red (FTIR) and nuclear magnetic resonance (NMR) analysis of the purified and lyophilized gold nanoparticles confirmed the surface adsorption of biomolecules during preparation and caused long-term (6 months) stability. Low reaction temperature (25 °C) favored anisotropy. The strong reducing power of the flower extract can also be tested in the green synthesis of other metallic nanoparticles.     

Tansy fruit mediated greener synthesis of silver and gold nanoparticles

In this paper we have reported the green synthesis of silver (AgNPs) and gold (AuNPs) nanoparticles by reduction of silver nitrate and chloroauric acid solutions, respectively, using fruit extract of Tanacetum vulgare; commonly found plant in Finland. The process for the synthesis of AgNPs and AuNPs is rapid, novel and ecofriendly. Formation of the AgNPs and AuNPs were confirmed by surface plasmon spectra using UV–Vis spectrophotometer and absorbance peaks at 452 and 546 nm. Different tansy fruit extract concentration (TFE), silver and gold ion concentration, temperature and contact times were experimented in the synthesis of AgNPs and AuNPs. The properties of prepared nanoparticles were characterized by TEM, XRD, EDX and FTIR. Finally zeta potential values at various pH were analyzed along with corresponding SPR spectra.     

糖纳米材料的研究进展

纳米材料在电子学、光学、磁学和生物医药等方面有着广泛的应用。在过去的20年,金属纳米微粒已经成功地与多肽、蛋白质和DNA结合,但糖类物质直到2001年才被引入到纳米科学中。糖纳米微粒能够很好地构建类似细胞表面糖类表达的生物细胞模型,成为糖生物学、生物药学、材料科学中十分出色的研究工具。随着研究的深入,糖纳米材料由于其制备简便,具有独特的物理、化学和生物性质,其在生物医学成像、诊断及治疗等方面有着广泛的应用前景。     

Gamma–Radiation-Assisted Synthesis of Luminescent ZnO/Ag Heterostructure Core–Shell Nanocomposites

There is increasing interest in tuning the physical properties of semiconductor nanostructures using metal nanoparticles. In this work, ZnO nanosphere covered with Ag nanoparticles were synthesized using gamma–radiation-assisted method. The amount of deposited Ag nanoparticles is controlled by changing irradiation dose in the range of 30–100 kGy in order to tune the semiconductor–metal interaction. The successful deposition of Ag on the ZnO nanoparticles is examined by analyzing the morphology, microstructure, optical, and magnetic properties of ZnO/Ag nanoparticles through field emission scanning electron (FESEM), microscopy X-ray diffraction spectra, UV-visible absorption, photoluminescence measurement, and vibrating sample magnetometer. FESEM and elemental mapping results confirmed that Ag nanoparticles have been concentrated at the surface of spherical ZnO particles. Moreover, formation of pure metallic Ag nanoparticles has been confirmed by XRD analysis. UV-visible absorption spectra of obtained ZnO/Ag showed two combined peaks, a weak peak at the shoulder around 360 nm corresponds to ZnO and a sharp absorption at 420 nm refers to spherical Ag nanoparticles. Obtained results from photoluminescence revealed that the near-band-edge emission and defect-related visible emission bands of ZnO could be enhanced dramatically at the same time by deposition of Ag nanoparticles, which was ascribed to localized surface plasmon–exciton coupling and surface plasmon scattering. Controlling the semiconductor and metal coupling effect is interesting because of its application in highly efficient optoelectronic devices and biosensor.     

Production of gold nanoparticles by electrode-respiring Geobacter sulfurreducens biofilms

The goal of this work was to synthesize gold nanoparticles (AuNPs) using electrode-respiring Geobacter sulfurreducens biofilms. We found that AuNPs are generated in the extracellular matrix of Geobacter biofilms and have an average particle size of 20 nm. The formation of AuNPs was verified using TEM, FTIR and EDX. We also found that the extracellular substances extracted from electrode-respiring G. sulfurreducens biofilms reduce Au³⁺ to AuNPs. From FTIR spectra, it appears that reduced sugars were involved in the bioreduction and synthesis of AuNPs and that amine groups acted as the major biomolecules involved in binding.