Effects of biochar from slow pyrolysis of papermill waste on agronomic performance and soil fertility

The amendment of two agricultural soils with two biochars derived from the slow pyrolysis of papermill waste was assessed in a glasshouse study. Characterisation of both biochars revealed high surface area (115 m² g^?1) and zones of calcium mineral agglomeration. The biochars differed slightly in their liming values (33% and 29%), and carbon content (50% and 52%). Molar H/C ratios of 0.3 in the biochars suggested aromatic stability. At application rates of 10 t ha^?1 in a ferrosol both biochars significantly increased pH, CEC, exchangeable Ca and total C, while in a calcarosol both biochars increased C while biochar 2 also increased exchangeable K. Biochars reduced Al availability (ca. 2 cmol (+) kg^?1 to <0.1 cmol (+) kg^?1) in the ferrosol. The analysis of biomass production revealed a range of responses, due to both biochar characteristics and soil type. Both biochars significantly increased N uptake in wheat grown in fertiliser amended ferrosol. Concomitant increase in biomass production (250% times that of control) therefore suggested improved fertiliser use efficiency. Likewise, biochar amendment significantly increased biomass in soybean and radish in the ferrosol with fertiliser. The calcarosol amended with fertiliser and biochar however gave varied crop responses: Increased soybean biomass, but reduced wheat and radish biomass. No significant effects of biochar were shown in the absence of fertiliser for wheat and soybean, while radish biomass increased significantly. Earthworms showed preference for biochar-amended ferrosol over control soils with no significant difference recorded for the calcarosol. The results from this work demonstrate that the agronomic benefits of papermill biochars have to be verified for different soil types and crops.     

Effect of Pyrolysis Temperature on Chemical and Surface Properties of Biochar of Rapeseed (Brassica napus L.)

The biochar is an important carbon-rich product that is generated from biomass sources through pyrolysis. Biochar (charcoal) can be both used directly as a potential source of solid biofuels and as soil amendments for barren lands. The aim of this study was investigate influence of pyrolysis temperature on the physicochemical properties and structure of biochar. The biochars were produced by pyrolysis of rapeseed (Brassica napus L.) using a fixed-bed reactor at different pyrolysis temperatures (400–700°C). The produced biochars were characterized by proximate and elemental analysis, Brunauer–Emmett–Teller (BET) surface area, particle size distributions, scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy. The results showed that both chemical and surface properties of the biochars were significantly affected by the pyrolysis temperature. Aromatic hydrocarbons, hydroxyl and carbonyl compounds were the majority components of the biochar. The biochar obtained at 700°C had a high fixed carbon content (66.16%) as well as a high heating value, and therefore it could be used as solid fuel, precursor in the activated carbons manufacture (specific surface area until 25.38 m² g^?1), or to obtain category-A briquettes.     

Contrasting effects of manure and green waste biochars on the properties of an acidic ferralsol and productivity of a subtropical pasture

Background and Aim

We hypothesised that amending an acidic ferralsol with biochar would improve the productivity of a subtropical dairy pasture via reducing soil acidity related constraints and result in improved nitrogen use efficiency. We examined two contrasting biochars with different carbon, nutrient content and acid neutralising values.

Methods

Field plots were amended with one of three biochar treatments (Nil, feedlot manure biochar [FM], green waste biochar [GW]) in combination with presence or absence of NPK fertiliser and presence or absence of liming. The FM and GW biochars had a carbon content of 44 and 76 %, available phosphorous of 5,960 and 93 mg kg^?1, and liming values of 13 and 5.6 %, respectively. The pasture was managed to supply year round high quality feed for dairy production.

Results

The FM biochar increased total pasture productivity by 11 % and improved the agronomic nitrogen use efficiency by 23 %. It also reduced soil acidity but did not significantly affect the pH dependent soil cation exchange capacity. The GW biochar did not improve pasture productivity. Both biochars resulted in an increase in the soil carbon density.

Conclusions

The high available phosphorous content of FM biochar makes it an effective amendment for acidic ferralsols. Greenwaste biochar did not have sufficient acid neutralising capacity or phosphorous content to reduce soil acidity constraints. Both biochars enhance soil carbon storage in pasture systems on ferralsol.     

Characterization of Bio-oil and Bio-char from Pyrolysis of Palm Oil Wastes

The residues from the palm oil industry are the main contributors to biomass waste in Malaysia, and these wastes require extra attention with respect to handling. The biomass waste is a renewable resource that can potentially be used to produce absorbents, fuels, and chemical feedstocks through the pyrolysis process. In this study, the wastes of palm shell, empty fruit bunches, and mesocarp fiber were characterized and then pyrolyzed in a fixed-bed reactor under the following conditions: a temperature of 500 °C, a nitrogen flow rate of 2 L/min and reaction time of 60 min. After pyrolysis, characterization of the products with an emphasis on the bio-oil and the bio-char was performed using various approaches (including Karl Fischer water-content tests, FTIR, SEM, TGA and CNH/O analyses). The results showed that the pyrolysis of palm oil wastes yielded more bio-oil than bio-char or non-condensable gases. The results also indicated that all of the bio-oils were acidic and contained high levels of oxygen. The bio-oils heating values were low and varied from 10.49 MJ/kg to 14.78 MJ/kg. The heating values of the bio-chars (20–30 MJ/kg) were higher than those of the bio-oils. Among the biomasses studied in this work, palm shell contained the highest level of lignin and showed the highest levels of bio-char yield and fixed and elemental carbon in the raw and bio-char form.     

Impact of six lignocellulosic biochars on C and N dynamics of two contrasting soils

Both soil and biochar properties are known to influence greenhouse gas emissions from biochar‐amended soils, but poor understanding of underlying mechanisms challenges prediction and modeling. Here, we examine the effect of six lignocellulosic biochars produced from the pyrolysis of corn stover and wood feedstocks on CO₂ and N₂O emissions from soils collected from two bioenergy cropping systems. Effects of biochar on total accumulated CO₂‐C emissions were minimal (<0.45 mg C g^?1 soil; <10% of biochar C), consistent with mineralization and hydrolysis of small labile organic and inorganic C fractions in the studied biochars. Comparisons of soil CO₂ emissions with emissions from microbially inoculated quartz–biochar mixtures (‘quartz controls’) provide evidence of soil and biochar‐specific negative priming. Five of six biochar amendments suppressed N₂O emissions from at least one soil, and the magnitude of N₂O emissions suppression varied with respect to both biochar and soil types. Biochar amendments consistently decreased final soil NO₃^? concentrations, while contrasting effects on pH, NH₄⁺, and DOC highlighted the potential for formation of anaerobic microsites in biochar‐amended soils and consequential shifts in the soil redox environment. Thus, results implicated both reduced substrate availability and redox shifts as potential factors contributing to N₂O emission suppression. More research is needed to confirm these mechanisms, but overall our results suggest that soil biochar amendments commonly reduce N₂O emissions and have little effect on CO₂ emissions beyond the mineralization and/or hydrolysis of labile biochar C fractions. Considering the large C credit for the biochar C, we conclude that biochar amendments can reduce greenhouse gas emissions and enhance the climate change mitigation potential of bioenergy cropping systems.     

Pyrolysis of grape bagasse: effect of pyrolysis conditions on the product yields and characterization of the liquid product

In this study, pyrolysis of grape bagasse was investigated with the aim to study the product distribution and their chemical compositions and to identify optimum process conditions for maximizing the bio-oil yield. Particular investigated process variables were temperature (350-600 °C), heating rate (10-50 °C/min) and nitrogen gas flow rate (50-200 cm³/min). The maximum oil yield of 27.60% was obtained at the final pyrolysis temperature of 550 °C, sweeping gas flow rate of 100 cm³/min and heating rate of 50 °C/min in a fixed-bed reactor. The elemental analysis and heating value of the bio-oils were determined, and then the chemical composition of the bio-oil was investigated using chromatographic and spectroscopic techniques such as column chromatography, ¹H NMR and FTIR. The fuel properties of the bio-oil such as flash point, viscosity and density were also determined. The bio-oils obtained from grape bagasse were presented as an environmentally friendly feedstock candidate for bio-fuels.     

Biochar stimulates the decomposition of simple organic matter and suppresses the decomposition of complex organic matter in a sandy loam soil

Incorporating crop residues and biochar has received increasing attention as tools to mitigate atmospheric carbon dioxide (CO₂) emissions and promote soil carbon (C) sequestration. However, direct comparisons between biochar, torrefied biomass, and straw on both labile and recalcitrant soil organic matter (SOM) remain poorly understood. In this study, we explored the impact of biochars produced at different temperatures and torrefied biomass on the simple C substrates (glucose, amino acids), plant residues (Lolium perenne L.), and native SOM breakdown in soil using a ¹⁴C labeling approach. Torrefied biomass and biochars produced from wheat straw at four contrasting pyrolysis temperatures (250, 350, 450, and 550 °C) were incorporated into a sandy loam soil and their impact on C turnover compared to an unamended soil or one amended with unprocessed straw. Biochar, torrefied biomass, and straw application induced a shift in the soil microbial community size, activity, and structure with the greatest effects in the straw‐amended soil. In addition, they also resulted in changes in microbial carbon use efficiency (CUE) leading to more substrate C being partitioned into catabolic processes. While overall the biochar, torrefied biomass, and straw addition increased soil respiration, it reduced the turnover rate of the simple C substrates, plant residues, and native SOM and had no appreciable effect on the turnover rate of the microbial biomass. The negative SOM priming was positively correlated with biochar production temperature. We therefore ascribe the increase in soil CO₂ efflux to biochar‐derived C rather than that originating from SOM. In conclusion, the SOM priming magnitude is strongly influenced by both the soil organic C quality and the biochar properties. In comparison with straw, biochar has the greatest potential to promote soil C storage. However, straw and torrefied biomass may have other cobenefits which may make them more suitable as a CO₂ abatement strategy.     

Degradation kinetics of biochar from pyrolysis and hydrothermal carbonization in temperate soils

Background and Aims

Estimates of biochar residence times in soils range over three orders of magnitude. We present the first direct comparison between the biodegradation of a char from hydrothermal carbonization (htcBC) and pyrolysis (pyrBC) with high temporal resolution.

Methods

Mineralization of the biochars and their shared Miscanthus feedstock in three soils was determined directly by the ¹³CO₂ efflux using a novel method incorporating wavelength scanned cavity ring-down spectroscopy. Biochar half-life (t_1/2) was estimated with three empirical models.

Results

(1) The htcBC was readily biodegradable, whereas pyrBC was more recalcitrant. (2) Cumulative degradation of both biochars increased with soil organic carbon and nitrogen content. (3) The corrected Akaike information criterion (AIC_C) showed an overall preference for the double exponential model (DEM) reflecting a labile and a recalcitrant C-pool, over the first-order degradation model (FODM) and a logarithmic model. (4) The DEM resulted in t_1/2 ranging from 19.7–44.5, 0.7–2.1 and 0.8–1.3 years for pyrBC, htcBC and feedstock, respectively.

Conclusion

The degradation was rather similar between feedstock and htcBC but one order of magnitude slower for pyrBC. The AIC_C preferred FODM in two cases, where the DEM parameters indicated no distinction between a labile and recalcitrant carbon pool.     

Criteria to Select Biochars for Field Studies based on Biochar Chemical Properties

One factor limiting the understanding and evaluation of biochar for soil amendment and carbon sequestration applications is the scarcity of long-term, large-scale field studies. Limited land, time, and material resources require that biochars for field trials be carefully selected. In this study, 17 biochars from the fast pyrolysis, slow pyrolysis, and gasification of corn stover, switchgrass, and wood were thoroughly characterized and subjected to an 8-week soil incubation as a way to select the most promising biochars for a field trial. The methods used to characterize the biochars included proximate analysis, CHNS elemental analysis, Brunauer?CEmmett?CTeller surface (BET) area, photo-acoustic Fourier transform infrared spectroscopy, and quantitative ¹³?C solid-state nuclear magnetic resonance (NMR) spectroscopy. The soil incubation study was used to relate biochar properties to three soil responses: pH, cation exchange capacity (CEC), and water leachate electrical conductivity (EC). Characterization results suggest that biochars made in a kiln process where some oxygen was present in the reaction atmosphere have properties intermediate between slow pyrolysis and gasification and therefore, should be grouped separately. A close correlation was observed between aromaticity determined by NMR and fixed carbon fraction determined by proximate analysis, suggesting that the simpler, less expensive proximate analysis method can be used to gain aromaticity information. Of the 17 biochars originally assessed, four biochars were ultimately selected for their potential to improve soil properties and to provide soil data to refine the selection scheme: corn stover low-temperature fast pyrolysis (highest amended soil CEC, information on high volatile matter/O?CC ratio biochar), switchgrass O₂/steam gasification (relatively high BET surface area, and amended soil pH, EC, and CEC), switchgrass slow pyrolysis (higher-amended soil pH and EC), and hardwood kiln carbonization (information on slow pyrolysis, gasification and kiln-produced differences).     

Subcritical Water Hydrolysis of Microalgal Biomass for Protein and Pyrolytic Bio-oil Recovery

Microalgae are a promising source of protein and biofuels. This study involved the extraction of soluble proteins from raw microalgae using subcritical water hydrolysis followed by pyrolysis of the resulting spent microalgal biomass for bio-oil production. The extraction process produced solubilized protein in amounts up to 10 wt% of the dry biomass. The effects of hydrolysis temperature (150–220 °C), process time (90–180 min), and initial pH (2–12) on the chemical compositions and reactivity of the spent biomass as biofuel intermediates were investigated. It was found that when the temperature and time increased, the protein and carbohydrate fractions of the spent biomass were reduced, while their lipid fraction increased. A low initial pH led to lower protein content in the spent biomass. Compared with the raw microalgae, the spent biomass gave a higher yield of pyrolytic bio-oil that contained much less of the N-containing compounds and higher amounts of long-chain fatty acids (C₁₆) and C₁₄–C₂₀ long-chain hydrocarbons. In addition, enhanced energy recovery and a reduction in the energy consumption of the pyrolysis process were the other benefits acquired from the protein extraction. Therefore, subcritical water hydrolysis was considered to be an effective process to recover solubilized proteins, enhance the properties of the spent biomass, improve the energy balance of the subsequent pyrolysis process, and raise the quality of the bio-oil.     

Ameliorating Effects of Biochar Derived from Poultry Manure and White Clover Residues on Soil Nutrient Status and Plant growth Promotion - Greenhouse Experiments

Biochar application to agricultural soils is rapidly emerging as a new management strategy for its potential role in carbon sequestration, soil quality improvements, and plant growth promotion. The aim of our study was to investigate the effects of biochars derived from white clover residues and poultry manure on soil quality characteristics, growth and N accumulation in maize (Zea mays L.) and wheat (Triticum aestivum L.) grown in a loam soil under greenhouse conditions. Treatments comprised of: untreated control; mineral N fertilizer (urea N, UN) at the rate of 200, and 100 mg N kg^-1, white clover residues biochar (WCRB), poultry manure biochar (PMB) at 30 Mg ha^–1, and the possible combinations of WCRB+PMB (50:50), UN+WCRB (50:50), UN+PMB (50:50), and UN+WCRB+PMB (50:25:25). The treatments were arranged in a completely randomized design with three replications. Results indicated a significant increase in the growth and biomass production of maize and wheat supplemented with biochars alone or mixed with N fertilizer. Biochars treatments showed varying impact on plant growth depended upon the type of the biochar, and in general plant growth under PMB was significantly higher than that recorded under WCRB. The growth characteristics in the combined treatments (half biochar+half N) were either higher or equivalent to that recorded under full fertilizer N treatment (N₂₀₀). The biochar treatments WCRB, PMB, and WCRB+PMB (50:50) increased maize shoot N by 18, 26 and 21%, respectively compared to the control while wheat shoot N did not show positive response. The N-uptake by maize treated with WCRB, PMB, and WCRB+PMB (50:50) was 54, 116, and 90 mg g^-1 compared to the 33 mg g^-1 in the control while the N-uptake by wheat was 41, 60, and 53 mg g^-1 compared to 24 mg g^-1 in the control. The mixed treatments (half biochar+half N) increased N-uptake by 2.3folds in maize and 1.7 to 2.5folds in wheat compared to the N₁₀₀ showing increasing effect of biochar on N use efficiency of applied N. Post-harvest soil analysis indicated a significant increase in pH, organic matter, organic C, total N, C:N, and porosity (% pore space) by the added biochars while bulk density (BD) was significantly decreased. The organic matter content in the soil amended with biochars ranged between 19.5 and 23.2 g kg^-1 compared to 11.7 and 10.2 g kg^-1 in the control and N fertilizer treatments while the BD of biochars amended soils (WCRB, PMB, and WCRB+PMB) was 1.07, 1.17, and 1.11 g cm^-3 compared to 1.28 g cm^-1 in the control. In summary, the results of present study highlight the agronomic benefits of biochars in improving the quality of the soil, and promoting growth, yield and N accumulation of both maize and wheat with a consequent benefit to agriculture.     

Pyrolysis temperature determines the amendment effects of poplar residue-derived biochars on reducing CO2 emission

Poplars and their hybrids are widely planted in both plantation forestry and agroforestry systems of the world. Along with the utilization and plantation management processes, a large amount of biomass residues are produced, but the relationship between biochar properties and soil CO₂ emissions is largely unknown. Here, a laboratory incubation study was conducted to assess the effects of different biochars and their corresponding biomass residues on soil CO₂ emissions during the 180 days of incubation. Poplar residue-derived biochars were larger in the surface area and total pore volume but lower in nutrients and pH values than the rice straw-derived biochar. Increasing pyrolysis temperature led to a decrease in the total nitrogen (TN) content of poplar leaf- and rice straw-derived biochars, but enhanced the TN in the poplar twig- and poplar bark-derived biochars. After 180-day incubation, the total cumulative CO₂ emission decreased by 33.1%–73.8% in the biochar amendments compared to their corresponding biomass residue addition, whereas the biochars derived from poplar twig and bark residues had more positive effects on reducing soil CO₂ emissions, but depended on the pyrolysis temperature. Correlation analysis showed a significant and positive correlation between the CO₂ emissions and TN content of bio-based materials but the negative relationships to total carbon content and C/N ratio. Meanwhile the positive correlations of CO₂ emissions to the surface area, t-plot micropore area, and volume of the biochars were detected. Our results suggest that application of poplar twig- and poplar bark-derived biochars has a great potential for mitigating global warming.     

The dynamics of the G protein-coupled neuropeptide Y2 receptor in monounsaturated membranes investigated by solid-state NMR spectroscopy

In contrast to the static snapshots provided by protein crystallography, G protein-coupled receptors constitute a group of proteins with highly dynamic properties, which are required in the receptors’ function as signaling molecule. Here, the human neuropeptide Y2 receptor was reconstituted into a model membrane composed of monounsaturated phospholipids and solid-state NMR was used to characterize its dynamics. Qualitative static ¹⁵N NMR spectra and quantitative determination of ¹H–¹³C order parameters through measurement of the ¹H–¹³C dipolar couplings of the CH, CH₂ and CH₃ groups revealed axially symmetric motions of the whole molecule in the membrane and molecular fluctuations of varying amplitude from all molecular segments. The molecular order parameters (S_backbone = 0.59–0.67, S_CH2 = 0.41–0.51 and S_CH3 = 0.22) obtained in directly polarized ¹³C NMR experiments demonstrate that the Y2 receptor is highly mobile in the native-like membrane. Interestingly, according to these results the receptor was found to be slightly more rigid in the membranes formed by the monounsaturated phospholipids than by saturated phospholipids as investigated previously. This could be caused by an increased chain length of the monounsaturated lipids, which may result in a higher helical content of the receptor. Furthermore, the incorporation of cholesterol, phosphatidylethanolamine, or negatively charged phosphatidylserine into the membrane did not have a significant influence on the molecular mobility of the Y2 receptor.     

Effects of Feedstock and Pyrolysis Temperature on Biochar Adsorption of Ammonium and Nitrate

Biochar produced by pyrolysis of biomass can be used to counter nitrogen (N) pollution. The present study investigated the effects of feedstock and temperature on characteristics of biochars and their adsorption ability for ammonium N (NH₄ ⁺-N) and nitrate N (NO₃ ⁻-N). Twelve biochars were produced from wheat-straw (W-BC), corn-straw (C-BC) and peanut-shell (P-BC) at pyrolysis temperatures of 400, 500, 600 and 700°C. Biochar physical and chemical properties were determined and the biochars were used for N sorption experiments. The results showed that biochar yield and contents of N, hydrogen and oxygen decreased as pyrolysis temperature increased from 400°C to 700°C, whereas contents of ash, pH and carbon increased with greater pyrolysis temperature. All biochars could sorb substantial amounts of NH₄ ⁺-N, and the sorption characteristics were well fitted to the Freundlich isotherm model. The ability of biochars to adsorb NH₄ ⁺-N followed: C-BC>P-BC>W-BC, and the adsorption amount decreased with higher pyrolysis temperature. The ability of C-BC to sorb NH₄ ⁺-N was the highest because it had the largest cation exchange capacity (CEC) among all biochars (e.g., C-BC400 with a CEC of 38.3 cmol kg⁻¹ adsorbed 2.3 mg NH₄ ⁺-N g⁻¹ in solutions with 50 mg NH₄ ⁺ L⁻¹). Compared with NH₄ ⁺-N, none of NO₃ ⁻-N was adsorbed to biochars at different NO₃ ⁻ concentrations. Instead, some NO₃ ⁻-N was even released from the biochar materials. We conclude that biochars can be used under conditions where NH₄ ⁺-N (or NH₃) pollution is a concern, but further research is needed in terms of applying biochars to reduce NO₃ ⁻-N pollution.     

Pyrolysis of Mixed Date Stones and Pistachio Shells: Identification of Bio-Oil and Utilization of Bio-Char as Activated Carbon Precursor

Thermal pyrolysis of mixed date stones and pistachio shells in a semi-batch reactor was addressed in this study. The highest yield of liquids (51.20 %) was produced at 500 °C, 90 min, 20 °C/min heating rate, and 50 mesh particle size. Under these conditions, yield of liquid from date stones and pistachio shells separately was 49.12 % and 47.67 %, respectively. The FT-IR results confirmed the presence of multiple oxygen-containing compounds in the bio-oil. Results from GC–MS declared that it was predominately composed of acids (57.57 %), esters (21.35 %), phenols (4.63 5), and alcohols (3.49 5). The obtained biochar was transformed into activated carbon (AC) by the optimized ZnCl₂ activation method. The ideal AC was synthesized at 600 °C for 60 min using a 2 : 1 ZnCl₂: biochar impregnation ratio. FESEM and XRD measurements showed that the AC was amorphous. The prepared AC was effective in eliminating dibenzothiophene (DBT) from model fuel (200 ppm DBT/hexane) with a maximum performance 95.26 % at 40 °C for 1h using 0.35 g of the AC. The exhausted AC was regenerated and reutilized 4 times, and removal efficiency reached 88.23 % in the 4^th cycle under ideal working conditions.     

Influence of NH3/CO2 Modification on the Characteristic of Biochar and the CO2 Capture

This paper was aimed to study the influence of modification of biochar on the performance of CO₂ adsorption. Biochar, obtained from cotton stalk pyrolysis in a fixed bed reactor, was modified with ammonia and CO₂. The physicochemical properties of biochars were characterized by the Fourier transform infrared spectroscopy and automatic adsorption equipment (Micromeritics, ASAP 2020, USA). CO₂ adsorption of biochar was performed in thermogravimetric analyzer. The results showed that the surface area of char was increased significantly by CO₂ modification, while N-contained compound on char surface was enriched obviously by NH₃ modification. CO₂ adsorption of biochar increased greatly with CO₂ and NH₃ modification. CO₂ adsorption was mainly attributed to physical adsorption at 20 °C, and the adsorption quantity (maximum = 99 mg/g) was proportional to the micropore volume of the char. However, at 120 °C, molecular thermal motion increase, chemical adsorption start to play a dominated role, and the adsorption was directly proportional to the N content of this char.     

Solid-state CP/MASS 13C-NMR spectroscopy: a sensitive method to monitor enzymatic hydrolysis of chitin

The time-course hydrolysis of colloidal chitin by the chitinase complex isolated from Myrothecium verrucaria was monitored using solution and solid-state ¹³C-NMR spectroscopy. The solution NMR studies showed the presence of N-acetylglucosamine (GlcNAc) as the sole product of hydrolysis. Solid-state ¹³C CP/MASS studies, on the other hand, indicated the presence of high molecular weight oligomers as well as GlcNAc. The linewidth of the C₁ carbon of the oligomers obtained after hydrolysis is found to be less than that of the unhydrolysed sample. The linewidths calculated from the spin-spin relaxation times (T₂) of colloidal chitin and its products of hydrolysis were in the restricted range of 40–50 Hz, compared with the observed linewidths of 143–123 Hz. Peak area measurement on monomer to polymer/oligomer indicated an initial slow formation of the monomer, GlcNAc. From the NMR data, the involvement of endo-enzymes in the initial phase of hydrolysis is suggested.     

Biochar from Miscanthus: a potential silicon fertilizer

Background and aims

Silicon (Si) is largely recognized to improve plant growth subjected to various biotic and abiotic stresses. As plants accumulate Si in the form of readily-soluble phytolith, we examine the possibility of using phytolith-rich biochar as a bio-available Si source for increasing the agronomical productivity of Si high-accumulator plants while augmenting soil fertility and C sequestration.

Methods

By adding three different biochars (Miscanthus x giganteus straws, coffee husks and woody material) at two different concentrations (1 % and 3 %; w/w) to soil samples, we investigated the effects on the soil respiration, the chemical characteristics and the kinetic release of bio-available Si (CaCl₂-extractable Si).

Results

Here we show that the biochar from Miscanthus straws was the most attractive amendment. Its incorporation at a 3 % rate improved the soil fertility parameters (pH and available cations) and combined the highest mean residence time of carbon (C) in soil (MRT?=?50 years) with the highest rate of release of bio-available Si. We attribute this result to the presence of phytoliths in this biochar, as revealed by SEM-EDS analysis.

Conclusions

Not only did the biochar from Miscanthus enhance both soil C sequestration and fertility, but the results of this study suggest that it can also be considered as a potential source of bio-available Si. Although our conclusions should be substantiated in the field, we suggest that Miscanthus biochar could be used as a potential source of bio-available silicon for the culture of such crop as Si-accumulator plants growing, for instance, in highly weathered tropical soils with low content in carbon, nutrients and bio-available Si.     

Pyrogenic temperature affects the particle size of biochar-supported nanoscaled zero valent iron (nZVI) and its silver removal capacity

Particle size of nanoscaled zero valent iron (nZVI) in nanocomposites can be affected by support materials. In this work, nZVI was supported by bamboo-derived biochars produced at 450 °C (BBL) and 600 °C (BBH). Total iron (Fe) contents were 14.4 and 11.9% for nZVI immobilized in BBL (nZVI/BBL) and BBH (nZVI/BBH), respectively. The resultant nanocomposites were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), and scanning electron microscopy/energy-dispersive X-ray analyses (SEM/EDS). The nZVI was successfully embedded in biochar pores and surfaces as confirmed by SEM/EDS and XRD. TEM revealed that particle sizes of nZVI in nZVI/BBL and nZVI/BBH were roughly 26 and 40 nm, respectively. The Ag⁺ sorption isotherms (25–300 mg L^?1 Ag⁺) suggested that 1 kg of nZVI in nZVI/BBL and nZVI/BBH removed as much as 745.5 and 534.5 g Ag⁺, respectively. The results suggested that Ag⁺ removal capacity was related to particle size of nZVI, which was also affected by pyrogenic temperature.     

Contrasting effects of maize residue,coal gas residue and their biochars on nutrient mineralization,enzyme activities and CO2 emissions in sandy loess soil

Mismanagement of crop straw and coal gas residue threatens the atmosphere and the economy. Nevertheless, thermal-pyrolysis is an option for management that turns bio-waste into biochar; its viability and adoption by the public as soil amendments is dependent on the agronomic and environmental values compared between biochar and the raw materials. We undertook a 60-day short-term analysis to assess the impact of various wastes and biochars, as well as inorganic nutrients (N), on carbon dioxide (CO₂) fluxes, soil enzyme activities, soil fertility status, and microbial activities. There were eight treatments of soil amendments: without an amendment (CK), Nutrients (N), straw + nutrients (S+N), straw biochar + nutrients (SB+N), coal gas residue + nutrients (C+N), coal gas residue biochar + nutrients (CB+N), straw + straw biochar + nutrients (S+SB+N) and coal gas residue waste + coal gas residue biochar + nutrients (C+ CB +N). The results indicated that soil EC, pH, nitrate N (NO₃^–- N), SOC, TN and available K were significantly (p < 0.05) increased coal gas residue biochar and combined with coal fly ash as compared to maize straw biochar and combined with maize straw and N treatments. The higher concentrations of soil MBC and MBN activities were increased in the maize straw application, while higher soil enzyme activity such as, invertase, urease and catalase were enhanced in the coal fly ash derived biochar treatments. The higher cumulative CO₂ emissions were recorded in the combined applications of maize straw and its biochar as well as coal gas residue and its biochar treatment. Our study concludes, that maize straw and coal fly ash wastes were converted into biochar product could be a feasible substitute way of discarding, since land amendment and decreased CO₂ fluxes and positive changes in soil microbial, and chemical properties, and can be confirmed under long-term conditions for reduction of economical and environment issues.