Biosorption of Acid Black 172 and Congo Red from aqueous solution by nonviable Penicillium YW 01: Kinetic study, equilibrium isotherm and artificial neural network modeling

The main objective of this work was to investigate the biosorption performance of nonviable Penicillium YW 01 biomass for removal of Acid Black 172 metal-complex dye (AB) and Congo Red (CR) in solutions. Maximum biosorption capacities of 225.38 and 411.53 mg g⁻¹ under initial dye concentration of 800 mg L⁻¹, pH 3.0 and 40 °C conditions were observed for AB and CR, respectively. Biosorption data were successfully described with Langmuir isotherm and the pseudo-second-order kinetic model. The Weber-Morris model analysis indicated that intraparticle diffusion was the limiting step for biosorption of AB and CR onto biosorbent. Analysis based on the artificial neural network and genetic algorithms hybrid model indicated that initial dye concentration and temperature appeared to be the most influential parameters for biosorption process of AB and CR onto biosorbent, respectively. Characterization of the biosorbent and possible dye-biosorbent interaction were confirmed by Fourier transform infrared spectroscopy and scanning electron microscopy.     

Removal of Acid Blue25 from aqueous solutions using Bengal gram fruit shell (BGFS) biomass

The feasibility for the removal of Acid Blue25 (AB25) by Bengal gram fruit shell (BGFS), an agricultural by-product, has been investigated as an alternative for high-cost adsorbents. The impact of various experimental parameters such as dose, different dye concentration, solution pH, and temperature on the removal of Acid Blue25 (AB25) has been studied under the batch mode of operation. pH is a significant impact on the sorption of AB25 onto BGFS. The maximum removal of AB25 was achieved at a pH of 2 (83.84%). The optimum dose of biosorbent was selected as 200 mg for the removal of AB25 onto BGFS. Kinetic studies reveal that equilibrium reached within 180 minutes. Biosorption kinetics has been described by Lagergren equation and biosorption isotherms by classical Langmuir and Freundlich models. Equilibrium data were found to fit well with the Langmuir and Freundlich models, and the maximum monolayer biosorption capacity was 29.41 mg g^?1 of AB25 onto BGFS. The kinetic studies indicated that the pseudo-second-order (PSO) model fitted the experimental data well. In addition, thermodynamic parameters have been calculated. The biosorption process was spontaneous and exothermic in nature with negative values of ΔG° (?1.6031 to ?0.1089 kJ mol^?1) and ΔH° (?16.7920 kJ mol^?1). The negative ΔG° indicates the feasibility of physical biosorption process. The results indicate that BGFS could be used as an eco-friendly and cost-effective biosorbent for the removal of AB25 from aqueous solution.     

Biosorption behaviors of biosorbents based on microorganisms immobilized by Ca-alginate for removing lead (II) from aqueous solution

Multiple microorganisms directly or treated with NaOH were immobilized by using Ca-alginate embedding to form biosorbents I and II, successively. The biosorption behaviors of biosorbents I and II for Pb(II) from aqueous solution were investigated in a batch system. Effects of solution pH, initial metal concentration, biosorbent dosage, contact time, temperature, and ionic strength on the adsorption process were considered to study the biosorption equilibrium, kinetics, thermodynamics, and mechanism of Pb(II) ion adsorption on the 2 types of biosorbents. The results showed that the adsorption capacity of biosorbent II for Pb(II) was higher than that of biosorbent I, and biosorbent II had a faster adsorption rate for Pb(II) ions. According to FTIR spectra, the carboxyl, amine, and hydroxyl groups on the biomass surface were involved in the biosorption of Pb(II). EDX analysis showed that ion exchange may be involved in the biosorption process, and the morphology observed by SEM micrograph of biosorbent I was completely different from that of biosorbent II. Desorption and regeneration experiments showed that the 2 types of biosorbents could be reused for 3 biosorption-desorption cycles without significant loss of their initial biosorption capacities.     

Biosorption of three textile dyes from contaminated water by filamentous green algal Spirogyra sp.: Kinetic,isotherm and thermodynamic studies

A freshwater filamentous green alga Spirogyra sp. was used as an inexpensive and efficient biosorbent for the removal of C.I. Acid Orange 7 (AO7), C.I. Basic Red 46 (BR46) and C.I. Basic Blue 3 (BB3) dyes from contaminated water. The effects of various physico–chemical parameters on dye removal efficiency were investigated, e.g. contact time, pH, initial dyes concentration, the amount of alga, temperature and biosorbent particle size. Dyes biosorption was a quick process and reactions reached to equilibrium conditions within 60 min. The biosorption capacity of three dyes onto alga was found in the following order: BR46 > BB3> AO7. The values of thermodynamic parameters, including ΔG, ΔH and ΔS, indicated that the biosorption of the dyes on the dried Spirogyra sp. biomass was feasible, spontaneous and endothermic. The pseudo-first order, pseudo-second order and the intraparticle diffusion models were applied to the experimental data in order to kinetically describe the removal mechanism of dyes, with the second one showing the best fit with the experimental kinetic biosorption data (R² = 0.99). It was also found that the adsorption process followed the Freundlich isotherm model with the highest value of correlation coefficients (0.99) and the biosorption capacity being estimated to be 13.2, 12.2 and 6.2 mg g⁻¹ for BR46, BB3 and AO7, respectively.     

Biosorption of oxybenzene using biosorbent prepared by raw wastes of Zea mays and comparative study by using commercially available activated carbon

Organic pollutants present in waste water have undesirable effect on the environment. Industry activities are the key sources of organic pollutants. Prime pollutants released from various sources react instantly with the environment and become derived (secondary) pollutants, which stay for an elongated time. The present research work has been carried out using biosorbent prepared from various Zea mays wastes for elimination of oxybenzene. Different parameters viz contact time, initial concentration; adsorbent dose, temperature and pH were optimized for the biosorption of oxybenzene on to the biosorbent samples. BCS (Baby corn silk) showed higher percentage of biosorption at optimum contact time of 3 h, pH between 5 and 6 and temperature at 25 °C. Analysis of equilibrium biosorption data in terms of several isotherm models revealed that Langmuir isotherm and Freundlich isotherm indicates better agreement with the experimental data. The kinetics of oxybenzene biosorption on to the biosorbents was described with the pseudo-first-order model. Thermodynamic parameters indicated that biosorption onto biosorbent was feasible in nature, spontaneous, and endothermic for some biosorbents, but on contrary not feasible, exothermic and non spontaneous for other biosorbents. The result of this study showed that the biosorbent derived from Zea mays can be used as a prospective biosorbent for oxybenzene in wastewater and also can be an alternative for the commercially activated carbon.     

Biosorption of a textile dye (Acid Blue 40) by cone biomass of Thuja orientalis: estimation of equilibrium, thermodynamic and kinetic parameters

Biosorption of Acid Blue 40 (AB40) onto cone biomass of Thuja orientalis was studied with variation in the parameters of pH, contact time, biosorbent and dye concentration and temperature to estimate the equilibrium, thermodynamic and kinetic parameters. The AB40 biosorption was fast and the equilibrium was attained within 50 min. Equilibrium data fitted well to the Langmuir isotherm model in the studied concentration range of AB40 and at various temperatures. Maximum biosorption capacity (q(max)) for AB40 was 2.05 x 10(-4)mol g(-1) or 97.06 mg g(-1) at 20 degrees C. The changes of Gibbs free energy, enthalpy and entropy of biosorption were also evaluated for the biosorption of AB40 onto T. orientalis. The results indicate that the biosorption was spontaneous and exothermic. Kinetics of biosorption of AB40 was analyzed and rate constants were also derived and the results show that the pseudo-second-order kinetic model agrees very well with the experimental data.     

Comparison of the Heavy Metal Biosorption Capacity of Active,Heat‐Inactivated and NaOH‐Treated Phanerochaete chrysosporium Biosorbents

Three different kinds of Phanerochaete chrysosporium (NaOH‐treated, heat‐inactivated and active) biosorbent were used for the removal of Cd(II) and Hg(II) ions from aquatic systems. The biosorption of Cd(II) and Hg(II) ions on three different forms of Phanerochaete chrysosporium was studied in aqueous solutions in the concentration range of 50–700 mg/L. Maximum biosorption capacities of NaOH‐treated, heat‐inactivated and active Phanerochaete chrysosporium biomass were found to be 148.37 mg/g, 78.68 mg/g and 68.56 mg/g for Cd(II) as well as 224.67 mg/g, 122.37 mg/g and 88.26 mg/g for Hg(II), respectively. For Cd(II) and Hg(II) ions, the order of affinity of the biosorbents was arranged as NaOH‐treated > heat‐inactivated > active. The order of the amount of metal ions adsorbed was established as Hg(II) > Cd(II) on a weight basis, and as Cd(II) > Hg(II) on a molar basis. Biosorption equilibriums were established in about 60 min. The effect of the pH was also investigated, and maximum rates of biosorption of metal ions on the three different forms of Phanerochaete chrysosporium were observed at pH 6.0. The reusability experiments and synthetic wastewater studies were carried out with the most effective form, i.e., the NaOH‐treated Phanerochaete chrysosporium biomass. It was observed that the biosorbent could be regenerated using 10 mM HCl solution, with a recovery of up to 98%, and it could be reused in five biosorption‐desorption cycles without any considerable loss in biosorption capacity. The alkali‐treated Phanerochaete chrysosporium removed 73% of Cd(II) and 81% of Hg(II) ions from synthetic wastewater.     

Taguchi DoE methodology for modeling of synthetic dye biosorption from aqueous effluents: parametric and phenomenological studies

Abstract

Biosorption technology has been acknowledged as one of the most successful treatment approaches for colored industrial effluents. The problems such as its high manufacturing cost and poor regeneration capability in the use of activated carbon as a biosorbent have prompted the environmental scientists to develop alternative biosorbent materials. In this context, as a sustainable green generation alternative biosorbent source, the discarded seed biomass from pepper (Capsicum annuum L.) processing industry was explored for the biotreatment of colored aqueous effluents in this study. To test the wastewater cleaning ability of biosorbent, Basic red 46 was selected as a typical model synthetic dye. Taguchi DoE methodology was employed to study the effect of important operational parameters, contact time, pH and synthetic dye concentration, on the biosorption process and to develop a mathematical model for the estimation of biosorption potential of biosorbent. The percentage contribution of each of these process variables on the dye biosorption was found to be 19.31%, 41.39%, and 38.74%, respectively. The biosorption capacity under the optimum environmental conditions, contact time of 360?min, pH of 8 and dye concentration of 30?mg L^?1, was estimated to be 92.878?mg g^?1 (R²: 99.45). This value was very close to the experimentally obtained dye removal performance value (92.095?mg g^?1). These findings indicated the high ability of Taguchi DoE technique in the optimization and simulation of dye biosorption system. The kinetic and equilibrium modeling studies showed that the pseudo-second-order and Langmuir models were the best models for the elucidation of dye removal behavior of biosorbent. The thermodynamic studies displayed that the dye biosorption was a feasible, spontaneous and exothermic process. This parametric and phenomenological survey revealed that the discarded pepper seed biomass can be introduced as a potential and efficient biosorbent for the bioremediation of colored industrial effluents.     

Biosorption kinetics and isotherm studies of Acid Red 57 by dried Cephalosporium aphidicola cells from aqueous solutions

Equilibrium, kinetics and thermodynamic studies on the removal of Acid Red 57 (AR57) by biosorption onto dried Cephalosporium aphidicola (C. aphidicola) cells have been investigated in a batch system with respect to pH, contact time and temperature. The results showed that the equilibrium time was attained within 40 min and the maximum biosorption capacity of AR57 dye onto C. aphidicola cells was 2.08 × 10⁻⁴ mol g⁻¹ or 109.41 mg g⁻¹ obtained after contact with 0.4 g dm⁻³ biosorbent concentration, pH₀ of 1 and at a temperature of 20 °C. The pseudo-second-order kinetic model was observed to provide the best correlation of the experimental data among the kinetic models studied. Biosorption isotherm models were developed and the Langmuir, Freundlich and Dubinin–Radushkevich (D–R) isotherm models were conformed well to the experimental data. The changes of free energy, enthalpy and entropy of biosorption were also evaluated for the biosorption of AR57 dye onto C. aphidicola cells.     

Modeling studies on mono and binary component biosorption of phenol and cyanide from aqueous solution onto activated carbon derived from saw dust

Biosorption is an effective treatment method for the removal of phenol and cyanide from aqueous solution by saw dust activated carbon (SDAC). Batch experiments were achieved as a function of several experimental parameters, i.e. influence of biosorbent dose (5–60 g/L) contact time (2–40 h), pH (4–12), initial phenol concentration (100–1000 mg/L) and initial cyanide concentration (10–100 mg/L) and temperature (20–40 °C). The biosorption capacities of the biosorbent were detected as 178.85 mg/g for phenol with 300 mg/L of initial concentration and 0.82 mg/g for cyanide with 30 mg/L of initial concentration. The optimum pH is found to be 8 for phenol and 9 for cyanide biosorption. The mono component biosorption equilibrium data for both phenol and cyanide were well defined by Redlich–Peterson model and binary component adsorption equilibrium data well fitted by extended Freundlich model. The percentage removal of phenol and cyanide using SDAC was 66.67% and 73.33%, respectively. Equilibrium established within 30 h for phenol and 28 h for cyanide. Kinetic studies revealed that biosorption of phenol followed pseudo second order indicating adsorption through chemisorption and cyanide followed pseudo first order kinetic model indicating adsorption through physisorption. Thermodynamic studies parameters, i.e., enthalpy (Δh₀), entropy (ΔS₀) and Gibb’s free energy (ΔG₀) have also been considered for the system. Thermodynamic modeling studies revealed that the process of cyanide biosorption was endothermic and phenol biosorption was exothermic in nature.     

Bioremediation potential of a widespread industrial biowaste as renewable and sustainable biosorbent for synthetic dye pollution

In this study, a model synthetic azo dye (Basic red 46) bioremoval by Carpinus betulus sawdust as inexpensive, eco-friendly, and sustainable biosorbent from aqueous solution was examined in a batch biosorption system. The effective environmental parameters on the biosorption process, such as the value of pH, amount of biosorbent, initial dye concentration and contact time were optimized using classical test design. The possible dye-biosorbent interaction was determined by Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscopy (SEM). The equilibrium, thermodynamic, and kinetic studies for the biosorption of Basic red 46 onto the sawdust biomass were performed. In addition, a single-stage batch dye biosorption system was also designed. The dye biosorption yield of biosorbent was significantly influenced by the change of operating variables. The experimental data were best described by the Freundlich isotherm model and both the pseudo-first-order kinetic and the pseudo-second-order kinetic models. Thermodynamic research indicated that the biosorption of dye was feasible and spontaneous. Based on the Langmuir isotherm model, the biosorbent was found to have a maximum biosorption potential higher than many other biosorbents in the literature (264.915?mg g^?1). Thus, this investigation presents a novel green option for the assessment of waste sawdust biomass as a cheap and effective biosorbent material.     

Advances in biosorption of metals: Selection of biomass types

Abstract: Within the past decade, the potential of metal biosorption has been well established. For economic reasons, of particular interest are abundant biomass types either generated as a waste by-product of large-scale industrial fermentations or certain metal-binding algae found in large quantities in the sea. Some of these high metal-sorbing biomass types serve as a basis for newly developed metal biosorption processes foreseen particularly as a very competitive means for detoxification of metal-bearing industrial effluents. Ions of lead and cadmium, for instance, have been found to be bound very efficiently from very dilute solutions by the dried biomass of some ubiquitous brown marine algae such as Ascophyllum and Sargassum which accumulate more than 30% of biomass dry weight in the metal. Mycelia of industrially steroid-transforming fungi Rhizopus and Absidia are excellent biosorbents lbr lead, cadmium, copper, zinc, and uranium, binding also other heavy metals up to 25% of the biomass dry weight. The common yeast Saccharomyces cerevisiae is a 'mediocre' metal biosorbent. Construction of biosorption isotherm curves serves as a basic technique assisting in evaluation of the metal uptake by different biosorbents. The methodology is based on batch equilibrium sorption experiments extensively used for screening and quantitative comparison of new biosorbent materials. Experimental methodologies used in the study of biosorption and selected recent research results demonstrate the route to novel biosorbent materials some of which can even be repeatedly regenerated for re-use.     

Biosorbents for heavy metals removal and their future

A vast array of biological materials, especially bacteria, algae, yeasts and fungi have received increasing attention for heavy metal removal and recovery due to their good performance, low cost and large available quantities. The biosorbent, unlike mono functional ion exchange resins, contains variety of functional sites including carboxyl, imidazole, sulphydryl, amino, phosphate, sulfate, thioether, phenol, carbonyl, amide and hydroxyl moieties. Biosorbents are cheaper, more effective alternatives for the removal of metallic elements, especially heavy metals from aqueous solution. In this paper, based on the literatures and our research results, the biosorbents widely used for heavy metal removal were reviewed, mainly focusing on their cellular structure, biosorption performance, their pretreatment, modification, regeneration/reuse, modeling of biosorption (isotherm and kinetic models), the development of novel biosorbents, their evaluation, potential application and future. The pretreatment and modification of biosorbents aiming to improve their sorption capacity was introduced and evaluated. Molecular biotechnology is a potent tool to elucidate the mechanisms at molecular level, and to construct engineered organisms with higher biosorption capacity and selectivity for the objective metal ions. The potential application of biosorption and biosorbents was discussed. Although the biosorption application is facing the great challenge, there are two trends for the development of the biosorption process for metal removal. One trend is to use hybrid technology for pollutants removal, especially using living cells. Another trend is to develop the commercial biosorbents using immobilization technology, and to improve the biosorption process including regeneration/reuse, making the biosorbents just like a kind of ion exchange resin, as well as to exploit the market with great endeavor.     

A natural macroalgae consortium for biosorption of copper from aqueous solution: Optimization,modeling and design studies

In this study, the capacity of a natural macroalgae consortium consisting of Chaetomorpha sp., Polysiphonia sp., Ulva sp. and Cystoseira sp. species for the removal of copper ions from aqueous environment was investigated at different operating conditions, such as solution pH, copper ion concentration and contact time. These environmental parameters affecting the biosorption process were optimized on the basis of batch experiments. The experimentally obtained data for the biosorption of copper ions onto the macroalgae-based biosorbent were modeled using the isotherm models of Freundlich, Langmuir, Sips and Dubinin–Radushkevich and the kinetic models of pseudo-first-order, pseudo-second-order, Elovich and Weber and Morris. The pseudo-first-order and Sips equations were the most suitable models to describe the copper biosorption from aqueous solution. The thermodynamic data revealed the feasibility, spontaneity and physical nature of biosorption process. Based on the data of Sips isotherm model, the biosorption capacity of biosorbent for copper ions was calculated as 105.370 mg g^?1 under the optimum operating conditions. A single-stage batch biosorption system was developed to predict the real-scale-based copper removal performance of biosorbent. The results of this investigation showed the potential utility of macroalgae consortium for the biosorption of copper ions from aqueous medium.     

Biosorption of food dyes onto Spirulina platensis nanoparticles: equilibrium isotherm and thermodynamic analysis

The biosorption of food dyes FD&C red no. 40 and acid blue 9 onto Spirulina platensis nanoparticles was studied at different conditions of pH and temperature. Four isotherm models were used to evaluate the biosorption equilibrium and the thermodynamic parameters were estimated. Infra red analysis (FT-IR) and energy dispersive X-ray spectroscopy (EDS) were used to verify the biosorption behavior. The maximum biosorption capacities of FD&C red no. 40 and acid blue 9 were found at pH 4 and 298 K, and the values were 468.7 mg g⁻¹ and 1619.4 mg g⁻¹, respectively. The Sips model was more adequate to fit the equilibrium experimental data (R² > 0.99 and ARE < 5%). Thermodynamic study showed that the biosorption was exothermic, spontaneous and favorable. FT-IR and EDS analysis suggested that at pH 4 and 298 K, the biosorption of both dyes onto nanoparticles occurred by chemisorption.     

Performance of durian shell waste as high capacity biosorbent for Cr(VI) removal from synthetic wastewater

The capability of durian shell waste biomass as a novel and potential biosorbent for Cr(VI) removal from synthetic wastewater was studied. The adsorption study was performed in batch mode at different temperatures and pH. Langmuir and Freundlich isotherm models fit the equilibrium data very well (R² > 0.99). The maximum biosorption capacity of durian shell was 117 mg/g. On modeling its kinetic experimental data, the pseudo-first order prevails over the pseudo-second order model. Thermodynamically, the characteristic of Cr-biosorption process onto durian shell surface was spontaneous, irreversible and endothermic.     

Senna auriculata L. flower petal biomass: An alternative green biosorbent for the removal of fluoride from aqueous solutions

Fluoride contamination in groundwater is a major concern in many parts of India and all over the world. Researches paying attention for the removal of fluoride through the application of biosorbents prepared from different parts of plants are finding greater scope and importance. The present research work focuses on Senna auriculata L., flower petal biomass as biosorbent, and evaluated its feasibility for fluoride ion elimination from aqueous solutions. Batch experiments were conducted to remove fluoride under different experimental conditions have been optimized for the maximum removal of fluoride; 80% removal was observed at pH: 6, sorbent dosage: 0.25 g/100 mL, time of agitation: 90 min, and initial concentration of the fluoride ions: 5 mg/L. Characterization studies of the biosorbent revealed its favorability towards the sorption of fluoride. In the isothermal modeling studies, Langmuir isotherm model was obeyed by the biosorption process with R² value of 0.98 and from a kinetic perspective, the biosorption of fluoride onto the biosorbent observed the pseudo-second-order reaction with R² value of 0.98. The developed biosorbent has been applied to real field fluoride-contaminated water samples and found to be successful.     

Chitosan-coated Lentinus polychrous Lév.: Integrated biosorption and biodegradation systems for decolorization of anionic reactive dyes

Research and development of an effective color removal system is needed to reduce the severity of water pollution caused by effluent that contains dyes. In this study, the integrated biosorption and biodegradation system of chitosan coated Lentinus polychrous Lév. was developed and evaluated for its decolorization efficiency with regard to anionic reactive dye mixtures of Reactive Blue 19, 160, and 198. The fungi were coated with 0.1, 0.5, and 1.0% w/v of low molecular weight chitosan. The scanning electron micrographs confirmed that chitosan was successfully coated on the surface of the fungi. Studies of changes in UV–visible absorption spectra, dye desorption, ligninolytic enzyme activity, and Fourier transform infrared spectroscopy showed that within 6 h, the biosorption was the control mechanism and the dyes were reduced to 91.50, 77.66, 37.39, and 26.93% by the fungi coated with 0, 0.1, 0.5, and 1.0% w/v chitosan, respectively. From the 36th hour to the end of colorization at the 72nd hour, the fungal biodegradation by laccase and manganese peroxidase was dominant and all treatments had 5–8% of the dye remaining. Therefore, the chitosan coat acted as an efficient biosorbent for the anionic reactive dyes, thereby effectively improving the decolorization efficiency of the white rot fungus.     

Use of Spirulina platensis micro and nanoparticles for the removal synthetic dyes from aqueous solutions by biosorption

In this research, micro and nanoparticles of Spirulina platensis dead biomass were obtained, characterized and employed to removal FD&C red no. 40 and acid blue 9 synthetic dyes from aqueous solutions. The effects of particle size (micro and nano) and biosorbent dosage (from 50 to 750 mg) were studied. Pseudo-first order, pseudo-second order and Elovich models were used to evaluate the biosorption kinetics. The biosorption nature was verified using energy dispersive X-ray spectroscopy (EDS). The best results for both dyes were found using 250 mg of nanoparticles, in these conditions, the biosorption capacities were 295 mg g^?1 and 1450 mg g^?1, and the percentages of dye removal were 15.0 and 72.5% for the FD&C red no. 40 and acid blue 9, respectively. Pseudo-first order model was the more adequate to represent the biosorption of both dyes onto microparticles, and Elovich model was more appropriate to the biosorption onto nanoparticles. The EDS results suggested that the dyes biosorption onto microparticles occurred mainly by physical interactions, and for the nanoparticles, chemisorption was dominant.