Migration and retention of dissolved iron in three mesocosm wetlands

Three mesocosm wetlands (250 cm × 100 cm × 100 cm) with different wetland plants (Calamgrostis angustifolia, CA, Carex lasiocarpa, CL, and C. angustifolia/C. lasiocarpa mixture, AL, respectively) and hydrologic regimes were set to test migration and retention of exogenous dissolved iron ((NH₄)₂Fe(SO₄)₂of 40 mg Fe(II) L⁻¹) in the Sanjiang Plain Wetland in northeast China. The experiment was designed as two stages: open migration period (OMP) for 1.5 d and close retention period (CRP) for 28.5 d. Based on the outflow Fe(II) concentration during the OMP, retention efficiencies (RE) and iron retention fluxes adjusted by area (RF_ad) in the three mesocosm wetlands were calculated, and the migration of iron were modeled using the first-order kinetic model. Outflow pH decreased gradually from a weak alkaline condition to a weak acid condition during the OMP, and then increased during the CRP, while outflow Eh and DO decreased during the experiment. The three mesocosm wetlands had considerable RE ranging from 75% to 98%, with the averaged RF_ad of 4.31 ± 0.17, 4.20 ± 0.16, and 4.37 ± 0.13 g m⁻² h⁻¹ for CA, CL, and AL, respectively. The reduction conditions in the mesocosm wetlands developed after 4 d or 12 d and the former retained iron during the OMP became mobile and discharged primarily in the form of Fe(III). The first-order kinetic model could simulate the outflow concentration of dissolved iron during the OMP (R² = 0.91, 0.69, and 0.68 for CA, CL, and AL, respectively), while the outflow dissolved iron during the CMP was difficult to model because the changed pH and Eh conditions in the mesocosm wetlands cause the former precipitated iron to be mobile after several days.     

Releasing behavior of copper in recirculated bioreactor landfill

The purpose of this study was to determine the releasing behavior of copper in municipal solid waste (MSW) in landfill with respect to refuse and leachate as an inseparable system. Two simulated bioreactor landfills, one with leachate recirculation and the other without, were operated in room temperature for 320 days. Copper in refuse showed behaviors of staggered migration and retention, which corresponded with the degradation process of landfill obviously. The significant different amounts of Cu²⁺ leached out from refuse into leachate of two landfills were 24.74 mg and 118.53 mg after 320 days’ operation, respectively. It also reflected the releasing behavior of copper in landfill refuse at different stage accordingly. The results confirmed that the refuse in landfill had high potential of secondary pollution after closure.     

Evaluation and modeling of biochemical methane potential (BMP) of landfilled solid waste: A pilot scale study

The main goal of this study was to present a comparison of landfill performance with respect to solids decomposition. Biochemical methane potential (BMP) test was used to determine the initial and the remaining CH₄ potentials of solid wastes during 27 months of landfilling operation in two pilot scale landfill reactors. The initial methane potential of solid wastes filled to the reactors was around 0.347 L/CH₄/g dry waste, which decreased with operational time of landfill reactors to values of 0.117 and 0.154 L/CH₄/g dry waste for leachate recirculated (R1) and non-recirculated (R2) reactors, respectively. Results indicated that the average rate constant increased by 32% with leachate recirculation. Also, the performance of the system was modeled using the BMP data for the samples taken from reactors at varying operational times by MATLAB program. The first-order rate constants for R1 and R2 reactors were 0.01571 and 0.01195 1/d, respectively. The correlation between the model and the experimental parameters was more than 95%, showing the good fit of the model.     

Cascade bioreactor with submerged biofilm for aerobic treatment of Tunisian landfill leachate

A bioreactor cascade with a submerged biofilm is proposed to treat young landfill leachate of jbel chakir landfill site south west from capital Tunis, Tunisia. The prototype was run under different organic loading charges varying from 0.6 to 16.3 kg TOC m⁻³ day⁻¹. Without initial pH adjustment total organic carbon (TOC) removal rate varied between 65% and 97%. The total reduction of COD reached 92% at a hydraulic retention time of 36 h. However, the removal of total kjeldahl nitrogen for loading charges of 0.5 kg N m⁻³ day⁻¹ reached 75%. The adjustment of pH to 7.5 improved nitrogen removal to a rate of 85% for loading charge of 1 kg N m⁻³ day⁻¹. The main bacterial groups responsible for a simultaneous removal of organic carbon and nitrogen belonged to Bacillus, Actinomyces, Pseudomonas and Burkholderia genera. These selected isolates showed a great capacity of degradation at different leachate concentrations of total organic carbon.     

Functional model for intradiol-cleaving catechol 1,2-dioxygenase: Synthesis, structure, spectra, and catalytic activity of iron(III) complexes with substituted salicylaldimine ligands

A series of mononuclear iron(III) complexes with containing phenolate donor of substituted-salicylaldimine based ligands [Fe(L¹)(TCC)] · CH₃OH (1), [Fe(L²)(TCC)] · CH₃OH (2), [Fe(L³)(TCC)] (3), and [Fe(L⁴)(TCC)] (4) have been prepared and studied as functional models for catechol dioxygenases (H₂TCC = tetrachlorocatechol, or HL¹ = N′-(salicylaldimine)-N,N-diethyldiethylenetriamine, HL² = N′-(5-Br-salicylaldimine)-N,N-diethyldiethylenetriamine, HL³ = N′-(4,6-dimethoxy-salycyl-aldimine)-N,N-diethyl-diethylenetriamine, HL⁴ = N′-(4-methoxy-salicylaldimine)-N,N-diethyl-diethylenetriamine). They are structural models for inhibitors of enzyme-substrate adducts from the reactions of catechol 1,2-dioxygenases. Complexes 1-4 were characterized by spectroscopic methods and X-ray crystal structural analysis. The coordination sphere of Fe(III) atom of 1-4 is distorted octahedral with N₃O₃ donor set from the ligand and the substrate TCC occupying cis position, and Fe(III) is in high-spin (S = 5/2) electronic ground state. The in situ prepared iron(III) complexes without TCC, [Fe(L¹)Cl₂], [Fe(L²)Cl₂], [Fe(L³)Cl₂], and [Fe(L⁴)Cl₂] are reactive towards intradiol cleavage of the 3,5-di-tert-butylcatechol (H₂DBC) in the presence of O₂ or air. The reaction rate of catechol 1,2-dioxygenase depends on the redox potential and acidity of iron(III) ions in complexes as well as the substituent effect of the ligands. We have identified the reaction products and proposed the mechanism of the reactions of these iron(III) complexes with H₂DBC with O₂.     

Oxidation of thiocyanate by iron(V) in alkaline medium

The oxidation of thiocyanate by iron(V) (Fe(V)) was studied as a function of pH in alkaline solutions by a premix pulse radiolysis technique. The rates decrease with an increase in pH. The rate law for the oxidation of SCN⁻ by Fe(V) was obtained as −d[Fe(V)]/dt = k₁₀{[H⁺]²/([H⁺]² + K₂[H⁺] + K₂K₃)}[Fe(V)][SCN⁻], where k₁₀ = 5.72 ± 0.19 × 10⁶ M⁻¹ s⁻¹, pK₂ = 7.2, and pK₃ = 10.1. The reaction precedes via a two-electron oxidation, which converts Fe(V) to Fe(III). Thiocyanate reacts approximately 10³× faster with iron(V) than does with iron(VI).     

Design of novel iron compounds as potential therapeutic agents against tuberculosis

In the search for new therapeutic tools against tuberculosis two novel iron complexes, [Fe(L-H)₃], with 3-aminoquinoxaline-2-carbonitrile N¹,N⁴-dioxide derivatives (L) as ligands, were synthesized, characterized by a combination of techniques, and in vitro evaluated. Results were compared with those previously reported for two analogous iron complexes of other ligands of the same family of quinoxaline derivatives. In addition, the complexes were studied by cyclic voltammetry and EPR spectroscopy. Cyclic voltammograms of the iron compounds showed several cathodic processes which were attributed to the reduction of the metal center (Fe(III)/Fe(II)) and the coordinated ligand. EPR signals were characteristic of magnetically isolated high-spin Fe(III) in a rhombic environment and arise from transitions between m_S = ± 1/2 (g_eff ~ 9) or m_S = ± 3/2 (g_eff ~ 4.3) states. Mössbauer experiments showed hyperfine parameters that are typical of high-spin Fe(III) ions in a not too distorted environment. The novel complexes showed in vitro growth inhibitory activity on Mycobacterium tuberculosis H₃₇Rv (ATCC 27294), together with very low unspecific cytotoxicity on eukaryotic cells (cultured murine cell line J774). Both complexes showed higher inhibitory effects on M. tuberculosis than the “second-line” therapeutic drugs.     

In situ microbial treatment of landfill leachate using aerated lagoons

The aim of this study was to assess the efficiency of leachate treatment by microbial oxidation in four connected on-site aerated lagoons at a landfill site. The landfill site was found to be in an ageing methanogenic state, producing leachate with relatively low COD (mean value 1740 mg l⁻¹) and relatively high ammonium concentrations (mean value 1241 mg l⁻¹). Removal of COD averaged 75%, with retention times varying from 11 to 254 days. Overall 80% of the N load was removed within the plant, some by volatilisation of ammonium. Microbial community profiling of the water from each lagoon showed a divergent community profile, presumably a reflection of the nutrient status in each lagoon. In municipal solid waste landfills under similar conditions, leachate treatment through a facultative aerobic system in which sequential aerobic and anaerobic microbial oxidations occurred can readily be achieved using a simple two-lagoon system, suggesting this technology can be economic to install and simple to run.     

Diversity and activity of methanotrophs in landfill cover soils with and without landfill gas recovery systems

Aerobic CH₄ oxidation plays an important role in mitigating CH₄ release from landfills to the atmosphere. Therefore, in this study, oxidation activity and community of methanotrophs were investigated in a subtropical landfill. Among the three sites investigated, the highest CH₄ concentration was detected in the landfill cover soil of the site (A) without a landfill gas (LFG) recovery system, although the refuse in the site had been deposited for a longer time (∼14–15 years) compared to the other two sites (∼6–11 years) where a LFG recovery system was applied. In April and September, the higher CH₄ flux was detected in site A with 72.4 and 51.7 g m⁻² d⁻¹, respectively, compared to the other sites. The abundance of methanotrophs assessed by quantification of pmoA varied with location and season. A linear relationship was observed between the abundance of methanotrophs and CH₄ concentrations in the landfill cover soils (R = 0.827, P < 0.001). The key factors influencing the methanotrophic diversity in the landfill cover soils were pH, the water content and the CH₄ concentration in the soil, of which pH was the most important factor. Type I methanotrophs, including Methylococcus, Methylosarcina, Methylomicrobium and Methylobacter, and type II methanotrophs (Methylocystis) were all detected in the landfill cover soils, with Methylocystis and Methylosarcina being the dominant genera. Methylocystis was abundant in the slightly acidic landfill cover soil, especially in September, and represented more than 89% of the total terminal-restriction fragment abundance. These findings indicated that the LFG recovery system, as well as physical and chemical parameters, affected the diversity and activity of methanotrophs in landfill cover soils.     

Source reduction of the landfill leachate strength in a functional layer embedded landfill (FLEL)

In order to reduce the leachate strength from landfill at source, a novel landfill, functional layer embedded landfill, was developed through the introduction of the functional layers, and a comparative study was conducted between the functional layer embedded landfill (FLEL, R1) and the conventional landfill (CL, R2). It was found that the pollutant in leachate effluent from R1 was 20-50%, 14-43% and 33-75% of that from R2, in terms of COD, TN and NH₃-N. The cumulative movement of waste settlement was about 16.4 and 13.1 cm in R1 and R2 under the test period of 1 years, resulting in 13.7% and 10.9% of the original landfill height. Therefore, FLEL could save the land area and the cost of the leachate treatment process due to the reduction of leachate strength, and more waste could be disposed in landfill through the acceleration of the MSW degradation process, comparing to the CL.     

Performance and bacterial compositions of aged refuse reactors treating mature landfill leachate

Aged landfill leachates become more refractory over time and difficulty to treat. Recently, aged refuse bioreactors show great promise in treating leachates. In this study, aged refuse bioreactors were constructed to simulate landfill leachate degradation process. The characteristics of leachate were: COD_cr, ∼2200 mg/L; BOD₅, ∼280 mg/L; total nitrogen, ∼2030 mg/L; and ammonia, ∼1900 mg/L. Results showed that bioreactor could remove leachate pollutants effectively at hydraulic loading of 20 L/m³ d. The removal rate reduced when hydraulic loading doubled or temperature lowered. Effluent recirculation could alleviate the temperature effect. Combining aged refuse and slag biofilters could treat leachate more efficiently. Pyrosequencing analysis indicated that bacteria from Pseudomonas, Lysobacter, Bacillus and δ-proteobacter, Flexibacteraceae were more abundant in the samples. The Shannon index decreased at lower temperature, while evenness and equitability increased with recirculation. We suggest that filter medium and temperature may be the main factors for shaping bacterial community structure.     

Mono- and dinuclear Fe(III) complexes with the N2O2 donor 5-chlorosalicylideneimine ligands; synthesis, X-ray structural characterization and magnetic properties

Two novel monomeric [C₁₈H₁₇Cl₃N₂O₂Fe] (1) and dimeric [C₃₈H₃₆N₄O₄Cl₆Fe₂] (2) Fe(III) tetradentate Schiff base complexes have been synthesized and their crystal structures have been determined by single crystal X-ray diffraction analysis. In complex (1) the Schiff base ligand coordinates toward one iron atom in a tetradentate mode and each iron atom is five coordinated with the coordination geometry around iron atom which can be described as a distorted square pyramid. The presence of a short (2.89 Å) non-bonding interatomic Fe···O distances between adjacent monomeric Fe(III) complexes results in the formation of a dimer. Structural analysis of compound (2) shows that the structure is a centrosymmetric dimer in which the six coordinated Fe(III) atoms are linked by μ-phenoxo bridges from one of the phenolic oxygen atoms of each Schiff base ligand to the opposite metal center. The variable-temperature (2-300 K) magnetic susceptibility (χ) data of these two compounds have been investigated. The results show that for both complexes Fe(III) centers are in the high spin configuration (S = 5/2) and indicate antiferromagnetic spin-exchange interaction between Fe(III) ions. The obtained results are briefly discussed using magnetostructural correlations developed for other class of iron(III) complexes.     

Crystal structure and magnetic behaviour of a five-coordinate iron(III) complex of pyridoxal-4-methylthiosemicarbazone

The crystal structure and magnetic properties of a penta-coordinate iron(III) complex of pyridoxal-4-methylthiosemicarbazone, [Fe(H₂mthpy)Cl₂](CH₃C₆H₄SO₃), are reported. The synthesised ligand and the metal complex were characterised by spectroscopic methods (¹H NMR, IR, and mass spectroscopy), elemental analysis, and single crystal X-ray diffraction. The complex crystallises as dark brown microcrystals. The crystal data determined at 100(1) K revealed a triclinic system, space group (Z = 2). The ONSCl₂ geometry around the iron(III) atom is intermediate between trigonal bipyramidal and square pyramidal (τ = 0.40). The temperature dependence of the magnetic susceptibility (5-300 K) is consistent with a high spin Fe(III) ion (S = 5/2) exhibiting zero-field splitting. Interpretation of these data yielded: D = 0.34(1) cm⁻¹ and g = 2.078(3).     

Unexpected reactivity resulting from modifications of the ligand periphery: Synthesis, structure, and spectroscopic properties of iron complexes of new tripodal N-heterocyclic carbene (NHC) ligands

The chelating ligand tris-[2-(3-aryl-imidazol-2-ylidene)ethyl]amine (TIMEN^R, R = aryl = 2,6-xylyl (xyl), mesityl (mes)) has provided access to reactive transition metal complexes. Here, two new tripodal N-heterocyclic carbene ligands of the TIMEN^R system (R = aryl = tolyl (tol), 3,5-xylyl (3,5xyl)), featuring sterically less demanding aryl substituents were synthesized. With these ligands, Fe(II) precursor complexes could be obtained, namely [(TIMEN^tol)Fe](BF₄)₂ (3) and [(TIMEN^3,5xyl)Fe(CH₃CN)](PF₆)₂ (7), which showed unexpected reactivity upon reduction. Treatment of the compounds with sodium amalgam yield the tris- and bis-metallated products, [(TIMEN^tol∗∗∗)Fe] (4) and [(TIMEN^3,5xyl∗∗)Fe] (8), respectively. While the Fe(III) complex 4 is relatively inert towards oxygen, the Fe(II) complex 8 is prone to oxidation. This oxidation of 8 can readily be observed in chlorinated solvents, producing the Fe(III) complex [(TIMEN^3,5xyl∗∗)Fe](PF₆) (9). All new ligand imidazolium precursors and metal complexes were characterized by single crystal X-ray structure determination.     

Binding of α-synuclein with Fe(III) and with Fe(II) and biological implications of the resultant complexes

Parkinson’s disease (PD) is hallmarked by the abnormal intracellular inclusions (Lewy bodies or LBs) in dopaminergic cells. Amyloidogenic protein α-synuclein (α-syn) and iron (including both Fe(III) and Fe(II)) are both found to be present in LBs. The interaction between iron and α-syn might have important biological relevance to PD etiology. Previously, a moderate binding affinity between α-syn and Fe(II) (5.8 × 10³ M⁻¹) has been measured, but studies on the binding between α-syn and Fe(III) have not been reported. In this work, electrospray mass spectrometry (ES-MS), cyclic voltammetry (CV), and fluorescence spectroscopy were used to study the binding between α-syn and Fe(II) and the redox property of the resultant α-syn-Fe(II) complex. The complex is of a 1:1 stoichiometry and can be readily oxidized electrochemically and chemically (by O₂) to the putative α-syn-Fe(III) complex, with H₂O₂ as a co-product. The reduction potential was estimated to be 0.025 V vs. Ag/AgCl, which represents a shift by −0.550 V vs. the standard reduction potential of the free Fe(III)/Fe(II) couple. Such a shift allows a binding constant between α-syn and Fe(III), 1.2 × 10¹³ M⁻¹, to be deduced. Despite the relatively high binding affinity, α-syn-Fe(III) generated from the oxidation of α-syn-Fe(II) still dissociates due to the stronger tendency of Fe(III) to hydrolyze to Fe(OH)₃ and/or ferrihydrite gel. The roles of α-syn and its interaction with Fe(III) and/or Fe(II) are discussed in the context of oxidative stress, metal-catalyzed α-syn aggregation, and iron transfer processes.     

Synthesis, crystal structures and magnetic properties of mononuclear tris(croconate)ferrate(III) complexes

A straightforward synthetic method to prepare mononuclear croconato-containing iron (III) complexes, (A)₃[Fe(C₅O₅)₃] [A = tetrabutylammonium = n-Bu₄N⁺ (1) and along with their crystal structures and magnetic properties, are reported. The Fe(III) atom adopts a pseudo-octahedral geometry while magnetic susceptibility measurements, in the 2-300 K temperature range, show the occurrence of a high spin state (S = 5/2) in both complexes.     

Determination of cortisol in human blood sera by a new Ag(III) complex-luminol chemiluminescent system

A new chemiluminescence (CL) system based on the reaction of Ag(III) complex with luminol is, for the first time, reported in this work. Incorporated with a flow injection analyses (FIA), the new CL system has been applied for the determination of free cortisol in human sera. The system is based on the CL reaction of luminol with Ag(III) in alkaline solutions, while cortisol can dramatically enhance CL intensities. Under optimum conditions, CL intensities are proportional to concentration of cortisol in the range of 0.05-7.5 nM. The limit of detection is 2.0 × 10⁻¹¹ M (3σ), with a relative standard deviation (n = 11) of 1.9% for 3.5 × 10⁻⁹ M cortisol. Eight human blood serum samples were all handled by solid-phase extraction (SPE) clean-up and enrichment before detection. This detection system is highly sensitive and convenient and may find wide applications. Based on the chemiluminescent spectra, a possible reaction mechanism is also suggested.     

Functional model for catecholase-like activity: Synthesis, structure, spectra, and catalytic activity of iron(III) complexes with substituted-salicylaldimine ligands

Four new mononuclear iron(III) complexes with the substituted-salicylaldimine ligands, [Fe(L¹)(TCC)] (1), [Fe(L²)(TBC)] (2), [Fe(L³)(TBC)] (3) and [Fe(L⁴)(TCC)](CH₃CN) (4) (HL¹ = N′-(5-OH-salicylaldimine)-diethylenetriamine, HL² = (N′-(5-Cl-salicylaldimine)-diethylenetriamine, HL³ N′-(5-Br-salicyl-aldimine)-dipropylenetriamine, HL⁴ = (N′-3,5-Br-salicylaldimine)-dipropylenetriamine, H₂TCC = tetrachlorocatechol, and H₂TBC = tetrabromocatechol), were prepared and characterized by XRD, EPR, and Mössbauer spectroscopy. The coordination sphere of the Fe(III) in complexes 1-4 is a distorted octahedral with N₃O₃ donors set which constructed by the Schiff-base ligands and the catecholate substrates of TBC or TCC. The in situ prepared Fe(III) complexes [Fe(L¹)Cl₂], [Fe(L²)Cl₂], [Fe(L³)(Cl₂)], and [Fe(L⁴)Cl₂] in absence of TBC or TCC show a high catecholase-like activity for the oxidation of 3,5-DTBC to the corresponding quinone 3,5-DTBQ.     

Diversity of Bacteria and Archaea from a landfill in Chandigarh,India as revealed by culture-dependent and culture-independent molecular approaches

The bacterial community structure of a municipal landfill in Chandigarh, India was analysed by culture-dependent as well as culture-independent molecular approaches, and archaeal structure by the latter method. Samples were collected in two phases from the surface and a depth of 0.91 m in June, 2004 and from 0.91 m, 1.52 m and 1.68 m in May, 2005. After serial dilutions, samples were plated onto tryptic soy agar (TSA), plate count agar (PCA), tryptic soy broth agar (TSBA) and TSBA100 (TSBA diluted 100 times and solidified with agarose), and incubated aerobically at 30 °C. The number of bacteria (CFU) on different media ranged between 9.4 × 10⁵ g⁻¹ (on PCA) and 1.9 × 10⁷ g⁻¹ (on TSA) (wet weight). The numbers of bacteria enumerated from plates incubated anaerobically (anaerobic agar and reinforced clostridial agar) were 2.1 × 10⁷ and 1.7 × 10⁶ g⁻¹, respectively. Of the 468 isolated and purified bacteria (183 in the first phase and 285 in the second phase), 135 were characterised using phenotypic characteristics as well as 16S rRNA gene sequence analysis. It was found that members of the phylum Firmicutes were overwhelmingly predominant (86.6%) in the landfill, followed by Actinobacteria (9.6%) and Proteobacteria (3.7%). Among the Firmicutes, at least 17 species from the single genus Bacillus were the most abundant inhabitants of the landfill. Detailed polyphasic characterisation of many of these isolates led to the discovery of a novel genus Paenisporosarcina (and the species P. quisquiliarum), a novel species of Microbacterium, M. immunditiarum, and reclassification of Sporosarcina macmurdoensis, Pelagibacillus goriensis, Bacillus silvestris, Bacillus insolitus, Bacillus psychrotolerans and Bacillus psychrodurans. Culture-independent analysis of two 16S rRNA gene libraries also revealed that the phylum Firmicutes was the predominant group in this community. The diversity of Archaea was found to be limited mainly to members of two orders: Methanosarcinales and Methanomicrobiales of the phylum Euryarchaeota. When these results were compared to those reported earlier on similar studies, it was found that irrespective of differences in composition of municipal solid waste (especially compostable organic matter and paper) and climate, the members of bacterial and archaeal communities in landfills of many countries remained broadly similar.     

Determination of uric acid in human urine and serum by capillary electrophoresis with chemiluminescence detection

A simple and sensitive method based on capillary electrophoresis (CE) with chemiluminescence (CL) detection has been developed for the determination of uric acid (UA). The sensitive detection was based on the enhancement effect of UA on the CL reaction between luminol and potassium ferricyanide (K₃[Fe(CN)₆]) in alkaline solution. A laboratory-built reaction flow cell and a photon counter were deployed for the CL detection. Experimental conditions for CL detection were studied in detail to achieve a maximum assay sensitivity. Optimal conditions were found to be 1.0 × 10⁻⁴ M luminol added to the CE running buffer and 1.0 × 10⁻⁴ M K₃[Fe(CN)₆] in 0.2 M NaOH solution introduced postcolumn. The proposed CE-CL assay showed good repeatability (relative standard deviation [RSD] = 3.5%, n = 11) and a detection limit of 3.5 × 10⁻⁷ M UA (signal/noise ratio [S/N] = 3). A linear calibration curve ranging from 6.0 × 10⁻⁷ to 3.0 × 10⁻⁵ M UA was obtained. The method was evaluated by quantifying UA in human urine and serum samples with satisfactory assay results.