Biosorption of reactive dye by waste biomass of Nostoc linckia

Potential of spent biomass of a cyanobacterium, Nostoc linckia HA 46, from a hydrogen bioreactor was studied for biosorption of a textile dye, reactive red 198. The waste biomass was immobilized in calcium alginate and used for biosorption of the dye from aqueous solution using response surface methodology (RSM). Kinetics of the dye in aqueous solution was studied in batch mode. Interactive effects of initial dye concentration (100-500 mg/L), pH (2-6) and temperature (25-45 °C) on dye removal were examined using Box-Behnken design. Maximum adsorption capacity of the immobilized biomass was 93.5 mg/g at pH 2.0, initial concentration of 100 mg/L and 35 °C temperature, when 94% of the dye was removed. Fourier transform infrared (FT-IR) studies revealed that biosorption was mainly mediated by functional groups like hydroxyl, amide, carboxylate, methyl and methylene groups present on the cell surface.     

Enhancement of Lead(II) Biosorption by Microalgal Biomass Immobilized onto Loofa (Luffa cylindrica) Sponge

A unicellular green microalga, Chlorella sorokiniana, was immobilized on loofa (Luffa cylindrica) sponge and successfully used as a new biosorption system for the removal of lead(II) ions from aqueous solutions. The biosorption of lead(II) ions on both free and immobilized biomass of C. sorokiniana was investigated using aqueous solutions in the concentration range of 10–300 mg/L. The biosorption of lead(II) ions by C. sorokiniana biomass increased as the initial concentration of lead(II) ions increased in the medium. The maximum biosorption capacity for free and immobilized biomass of C. sorokiniana was found to be 108.04 and 123.67 mg lead(II)/g biomass, respectively. The biosorption kinetics were found to be fast, with 96 % of adsorption within the first 5 min and equilibrium reached at 15 min. The adsorption of lead(II) both by free and immobilized C. sorokiniana biomass followed the Langmuir isotherm. The biosorption capacities were detected to be dependent on the pH of the solution; and the maximum adsorption was obtained at a solution pH of about 5. The effect of light metal ions on lead(II) uptake was also studied and it was shown that the presence of light metal ions did not significantly affect lead(II) uptake. The loofa sponge‐immobilized C. sorokiniana biomass could be regenerated using 0.1 M HCl, with up to 99 % recovery. The desorbed biomass was used in five biosorption‐desorption cycles, and no noticeable loss in the biosorption capacity was observed. In addition, fixed bed breakthrough curves for lead(II) removal were presented. These studies demonstrated that loofa sponge‐immobilized biomass of C. sorokiniana could be used as an efficient biosorbent for the treatment of lead(II) containing wastewater.     

Biosorption of methylene blue from aqueous solution using free and polysulfone-immobilized Corynebacterium glutamicum: batch and column studies

The amino acid fermentation industry waste, Corynebacterium glutamicum, has been found to possess excellent biosorption capacity towards methylene blue (MB). Due to practical difficulties in solid-liquid separation and biomass regeneration, C. glutamicum was immobilized in a polysulfone matrix. The pH edge experiments revealed that neutral or alkaline pH values favored MB biosorption. Isotherm experiments indicated that C. glutamicum, when in immobilized state, exhibited slightly inferior dye uptake compared to free biomass. Also considering the two forms, immobilized biomass took a long time to attain equilibrium. An attempt to identify the diffusion limitations in immobilized beads was successful, with the Weber-Morris model clearly indicating intraparticle as the rate controlling step. Regeneration of the free biomass was not possible as it tended to become damaged under strong acidic conditions. On the other hand, immobilized biomass performed well with 99% desorption of MB from the biosorbent with the aid of 0.1 mol/l HCl. The immobilized biomass was also successfully regenerated and reused for three cycles without significant loss in sorption capacity. An up-flow packed column loaded with immobilized biomass was employed for the removal of MB. The column performed well in the biosorption of MB, exhibiting a delayed and favorable breakthrough curve with MB uptake and % removal of 124 mg/g biomass and 70.1%, respectively.     

Immobilization of blue green microalgae on loofa sponge to biosorb cadmium in repeated shake flask batch and continuous flow fixed bed column reactor system

Summary An indigenous strain of blue green microalga, Synechococcus sp., isolated from wastewater, was immobilized onto loofa sponge discs and investigated as a potential biosorbent for the removal of cadmium from aqueous solutions. Immobilization has enhanced the sorption of cadmium and an increase of biosorption (21%) at equilibrium was noted as compared to free biomass. The kinetics of cadmium biosorption was extremely rapid, with (96%) of adsorption within the first 5 min and equilibrium reached at 15 min. Increasing initial pH or initial cadmium concentration resulted in an increase in cadmium uptake. The maximum biosorption capacity of free and loofa immobilized biomass of Synechococcus sp. was found to be 47.73 and 57.76 mg g⁻¹ biomass respectively. The biosorption equilibrium was well described by Langmuir adsorption isotherm model. The biosorbed cadmium was desorbed by washing the immobilized biomass with dilute HCl (0.1 M) and desorbed biomass was reused in five biosorption–desorption cycles without an apparent decrease in its metal biosorption capacity. The metal removing capacity of loofa immobilized biomass was also tested in a continuous flow fixed-bed column bioreactor and was found to be highly effective in removing cadmium from aqueous solution. The results suggested that the loofa sponge-immobilized biomass of Synechococcus sp. could be used as a biosorbent for an efficient removal of heavy metal ions from aqueous solution.     

The mechanism of cadmium removal from aqueous solution by nonmetabolizing free and immobilized live biomass of Rhizopus oligosporus

A preliminary study on the removal of cadmium by nonmetabolizing live biomass of Rhizopus oligosporus from aqueous solution is presented. The equilibrium of the process was in all cases well described by the Langmuir sorption isotherm, suggesting that the process was a chemical, equilibrated and saturable mechanism which reflected the predominantly site-specific mechanism on the cell surface. A curve of Scatchard transformation plots reflected the covalent nature of Cd²⁺ adsorption by the cells. The maximum cadmium uptake capacities were 34.25 mg/g for immobilized cells and 17.09 mg/g for free cells. Some factorial experiments in shake flasks were performed in order to investigate the effect of different initial cadmium concentrations and biomass concentrations on the equilibrium. Experimental results showed a reverse trend of the influence of the immobilized and free biomass concentration on the cadmium specific uptake capacity. The immobilized cells had a higher specific cadmium uptake capacity with increasing biomass concentrations compared to free cells. In a bioreactor, the cadmium uptake capacity of immobilized cells (q_max = 30.1–37.5 mg/g) was similar to that observed in shake flask experiments (q_max = 34.25 mg/g) whereas with free cells the bioreactor q_max of 4.8–13.0 mg/g; was much lower than in shake flasks (q_max = 17.09 mg/g), suggesting that cadmium biosorption by immobilized cells of R. oligosporus might be further improved in bigger reactors. EDAX and transmission electron microscopic experiments on the fungal biomass indicated that the presence of Cd²⁺ sequestrated to the cell wall was due to bioadsorption.     

Multi-metal biosorption and bioaccumulation by Exiguobacterium sp. ZM-2

The present work deals with the biosorption performance of dried and non-growing biomasses of Exiguobacterium sp. ZM-2, isolated from soil contaminated with tannery effluents, for the removal of Cd²⁺, Ni²⁺, Cu²⁺, and Zn²⁺ from aqueous solution. The metal concentrations studied were 25 mg/l, 50 mg/l, 100 mg/l, 150 mg/l and 200 mg/l. The effect of solution pH and contact time was also studied. The biosorption capacity was significantly altered by pH of the solution. The removal of metal ions was conspicuously rapid; most of the total sorption occurred within 30 min. The sorption data have been analyzed and fitted to the Langmuir and Freundlich isotherm models. The highest Q_max value was found for the biosorption of Cd²⁺ at 43.5 mg/g in the presence of the non-growing biomass. Recovery of metals (Cd²⁺, Zn²⁺, Cu²⁺ and Ni²⁺) was found to be better when dried biomass was used in comparison to non-growing biomass. Metal removal through bioaccumulation was determined by growing the bacterial strain in nutrient broth amended with different concentrations of metal ions. This multi-metal resistant isolate could be employed for the removal of heavy metals from spent industrial effluents before discharging them into the environment.     

Potential of Live Spirulina platensis on Biosorption of Hexavalent Chromium and Its Conversion to Trivalent Chromium

Microalga biomass has been described worldwide according their capacity to realize biosorption of toxic metals. Chromium is one of the most toxic metals that could contaminate superficial and underground water. Considering the importance of Spirulina biomass in production of supplements for humans and for animal feed we assessed the biosorption of hexavalent chromium by living Spirulina platensis and its capacity to convert hexavalent chromium to trivalent chromium, less toxic, through its metabolism during growth. The active biomass was grown in Zarrouk medium diluted to 50% with distilled water, keeping the experiments under controlled conditions of aeration, temperature of 30°C and lighting of 1,800 lux. Hexavalent chromium was added using a potassium dichromate solution in fed-batch mode with the aim of evaluate the effect of several additions contaminant in the kinetic parameters of the culture. Cell growth was affected by the presence of chromium added at the beginning of cultures, and the best growth rates were obtained at lower metal concentrations in the medium. The biomass removed until 65.2% of hexavalent chromium added to the media, being 90.4% converted into trivalent chromium in the media and 9.6% retained in the biomass as trivalent chromium (0.931 mg.g^?1).     

Evaluation of fermentation waste (Corynebacterium glutamicum) as a biosorbent for the treatment of nickel(II)-bearing solutions

This research highlights the possibility of employing a fermentation industry waste (Corynebacterium glutamicum) for the removal of nickel(II) ions from aqueous solution. Furthermore, it necessitates the importance of detailed examinations on the possible differences in the biosorption performance, even for the same biomass, but from different origins. Two types of C. glutamicum, obtained from different industrial sources, were used in this study. With respect to nickel speciation and biosorption performance, pH 6 was identified as an optimal condition. Of the two types of C. glutamicum used, the biomass with excess negatively charged groups performed well in the binding of Ni²⁺ ions. To enhance the feasibility of using the biomass in column mode, as well as its reuse for multiple cycles, C. glutamicum was immobilized in a polysulfone matrix. Both the free and immobilized biomasses performed relatively well, with maximum experimental uptakes of 111.4 and 102.4 mg g⁻¹, respectively. An up-flow packed column loaded with immobilized biomass was employed for the removal of Ni²⁺ ions. The column performed well in the biosorption of nickel(II), and exhibited a delayed and favorable breakthrough curve, with Ni²⁺ uptake and percentage removal of 48.1 mg g⁻¹ biomass and 60.4%, respectively.     

The effect of pulse voltage and capacitance on biosorption of uranium by biomass derived from whiskey distillery spent wash

Biosorption of uranium by residual biomass from The Old Bushmill's Distillery Co. Ltd., Bushmills, Co. Antrim, Northern Ireland, following exposure to short and intense electric pulses has been examined. The biomass was prepared from the distillery spent wash and consisted of non-viable yeast and bacterial cells. As shown previously, untreated biomass had a maximum biosorption capacity of 170?mg uranium/g dry weight biomass. When biosorption reactions were placed between two electrodes and exposed to electric pulses with field strengths ranging from 1.25–3.25?kV/cm at a capacitance of 25?μF, biosorption increased from 170?mg of uranium to 275?mg uranium/g dry weight biomass. The data were obtained from biosorption isotherm analyses and taken as the degree of biosorption at residual uranium concentrations of 3?mM. In addition, when the capacitance of the electric pulses increased from 0.25?μF to 25?μF at a fixed pulse field strength the degree of biosorption increased from 210?mg uranium to 240?mg uranium/g dry weight biomass. The results suggest that application of short and intense electric pulses to biosorption reactions may play an important role in enhancing microbial biosorption of toxic metals/radionuclides from waste water streams.     

Biosorption of Cd, Zn and Cu by Sargassum sp. waste biomass

Biosorption is becoming an important component in the integrated approach to the treatment of aqueous effluents. The economics of biomass technical applications are improved by using waste biomass instead of purposely-produced biomass. Biomass derived from an alginate extraction industry - Sargassum sp. - was examined for its ability to function as a biosorbent for metals such as cadmium, zinc and copper. For use in column applications, biomass should be immobilized. To the algae reinforcement, the biomass was embedded in polyethleneimine (PEI), followed by glutaraldehyde crosslinking. Equilibrium Zn and Cu isotherms were analysed using the immobilization ratio that showed the best Cd performance. Either Freundlich or Langmuir models can describe the passive biosorption equilibrium of cadmium, zinc and cooper. The preference for this series of metals by the biomass was found to be Cd > Zn > Cu, with maximum uptake values of 157.8, 118.5 and 77.4 mg/g dry weight biomass for Cd, Zn and Cu. respectively. The metal binding capacity by non-living biomass is an important quality for industrial use.     

Removal and recovery of uranium (VI) from aqueous solutions by immobilized Aspergillus niger powder beads

The immobilized Aspergillus niger powder beads were obtained by entrapping nonviable A. niger powder into Ca-alginate gel. The effects of pH, contact time, initial uranium (VI) concentration and biomass dosage on the biosorption of uranium (VI) onto the beads from aqueous solutions were investigated in a batch system. Biosorption equilibrium data were agreeable with Langmuir isotherm model and the maximum biosorption capacity of the beads for uranium (VI) was estimated to be 649.4?mg/g at 30?°C. The biosorption kinetics followed the pseudo-second-order model and intraparticle diffusion equation. The variations in enthalpy (26.45?kJ/mol), entropy (0.167?kJ/mol?K) and Gibbs free energy were calculated from the experimental data. SEM and EDS analysis indicated that the beads have strong adsorption capability for uranium (VI). The adsorbed uranium (VI) on the beads could be released with HNO₃ or HCl. The results showed that the immobilized A. niger powder beads had great potential for removing and recovering uranium (VI) from aqueous solutions.     

Biosorption of Basic Blue 7 by fungal cells immobilized on the green-type biomatrix of Phragmites australis spongy tissue

Biosorption is an effective alternative method for the control of water pollution caused by different pollutants such as synthetic dyes and metals. A new and efficient biomass system was developed from the passively immobilized fungal cells. The spongy tissue of Phragmites australis was considered as the carrier for the immobilization of Neurospora sitophila cells employed for the biosorption of Basic Blue 7. This plant tissue was used for the first time as a carrier for fungal cells. The biosorption was examined through batch- and continuous-mode operations. The biosorption process conformed well to the Langmuir model. Maximum monolayer biosorption capacity of the biosorbent was recorded as 154.756 mg g^?1. Kinetic findings showed a very good compliance with the pseudo-second-order model. The negative values of ΔG° indicated a spontaneous nature of the biosorption process and a positive value of ΔH° (14.69 kJ mol^?1) concluded favorable decolorization at high temperature. The scanning electron microscopy analysis showed that a porous, rippled, and rough surface of biomass system was covered with BB7 molecular cloud. IR results revealed that functional groups like –OH, –NH, and C?O participated to the decolorization. Breakthrough and exhausted points were found as 360 and 570 minutes, respectively. The biomass system was successfully applied to the treatment of real wastewater.     

Biosorption of textile dyes by biomass derived from Kluyveromyces marxianus IMB3

Since it had previously been found that biomass derived from the thermotolerant ethanol-producing yeast strain Kluyveromyces marxianus IMB3 exhibited a relatively high affinity for heavy metals it was decided to determine whether or not it might be capable of textile dye biosorption. To this end, biosorption isotherm analysis was carried out using the biomass together with commonly-used textile dyes including Remazol Black B, Remazol Turquoise Blue, Remazol Red, Remazol Golden Yellow and Cibacron Orange. Although the dyes Remazol Black B, Remazol Turquoise Blue and Remazol Red adhered to the Langmuir model, the remaining dyes failed to do so. The observed biosorption capacities at equilibrium dye concentrations of 100?mg/l were compared and it was found that the biomass exhibited a significant affinity for each dye. The potential use of this biosorptive material in the bioremediation of textile processing effluents is discussed.     

The air‐lift photobioreactors with flow patterning for high‐density cultures of microalgae and carbon dioxide removal

A photobioreactor containing microalgae is a highly efficient system for converting carbon dioxide (CO₂) into biomass. Using a microalgal photobioreactor as a CO₂ mitigation system is a practical approach to the problem of CO₂ emission from waste gas. In this study, a marine microalga, Chlorella sp. NCTU‐2, was applied to assess biomass production and CO₂ removal. Three types of photobioreactors were designed and used: (i) without inner column (i.e. a bubble column), (ii) with a centric‐tube column and (iii) with a porous centric‐tube column. The specific growth rates (μ) of the batch cultures in the bubble column, the centric‐tube and the porous centric‐tube photobioreactor were 0.180, 0.226 and 0.252 day^?1, respectively. The porous centric‐tube photobioreactor, operated in semicontinuous culture mode with 10% CO₂ aeration, was evaluated. The results show that the maximum biomass productivity was 0.61 g/L when one fourth of the culture broth was recovered every 2 days. The CO₂ removal efficiency was also determined by measuring the influent and effluent loads at different aeration rates and cell densities of Chlorella sp. NCTU‐2. The results show that the CO₂ removal efficiency was related to biomass concentration and aeration rate. The maximum CO₂ removal efficiency of the Chlorella sp. NCTU‐2 culture was 63% when the biomass was maintained at 5.15 g/L concentration and 0.125 vvm aeration (volume gas per volume broth per min; 10% CO₂ in the aeration gas) in the porous centric‐tube photobioreactor.     

Waste biomass of Nostoc linckia as adsorbent of crystal violet dye: Optimization based on statistical model

The potential of spent biomass of a hydrogen producing cyanobacterial strain Nostoc linckia from a hydrogen fermentor was studied for decolorization of a tri-phenylmethane dye, crystal violet. The waste cyanobacterial biomass immobilized in calcium alginate was used as a biosorbent and the process variables were optimized for maximum dye removal using the statistical response surface methodology (RSM). Batch mode experiments were performed to determine the kinetic behavior of the dye in aqueous solution allowing the computation of kinetic parameters. Influence of interacting parameters like temperature (25-35 °C), pH (4-8), initial dye concentration (100-200 mg/L) and cyanobacterial dose (0.2-0.4 g) on dye removal were examined using central composite design (CCD) which included two additional levels for each parameter. Second-order polynomial regression model, was applied which was statistically validated using analysis of variance. Ability of the immobilized biomass to decolorize the dye was maximum (72%) at pH 8.0, temperature 35 °C, 200 mg/L initial dye concentration and 0.2 g cyanobacterial dose. Adsorption of the dye on cell surface was further confirmed by scanning electron micrographs of the biomass before and after dye loading. FT-IR studies revealed that decolorization was due to biosorption mediated mainly by functional groups like hydroxyl, amide, carboxylate, methyl and methylene groups present on the cell surface.     

Biosorption of nickel (II) from effluent of electroplating industry by immobilized cells of Bacillus species

In this study, Ni (II) biosorption capacity of immobilized cells of Bacillus sp. was investigated. Biosorption of Ni (II) was carried out in batch experiments and the important environmental conditions were optimized. The uptake of metal was rapid, and equilibrium was attained within 270 min. Bacillus strains (ten cultures) were isolated from nickel electroplating effluent by heat shock method. These isolates were grown up in nutrient broth supplemented with Ni (II)(50 mg/L). The culture, exhibiting maximum biosorption capacity (q^max: 118 mg/g), was selected and labeled Bacillus Bio‐4. In order to develop an economical biosorption process cell mass of Bacillus, Bio‐4 was immobilized in Na‐alginate. It was concluded from the results that biosorption of nickel is highly dependent on the type of sorbent and experimental conditions employed. Our results demonstrate that 6.0 mg immobilized cells (18 mg cell biomass in 3.0 mL of 1% Na alginate) had a maximum biosorption capacity of 113 mg Ni(II) per liter of suspension at pH 8.0, 100 rpm and 25°C. The Ni (II) removal was estimated to be 97.4%.     

The effect of pulse field strength on electric field stimulated biosorption of uranium by Kluyveromyces marxianus IMB3

Summary Improved biosorption of uranium by Kluyveromyces marxianus IMB3 biomass was achieved by increasing the electric field strength of delivered pulses from 1.25kV/cm to 2.5kV/cm. Although this had little or no effect on the maximum biosorption capacity (q_max), at low concentrations of uranium the amount bound to the biomass increased from 70 to 140mg uranium/g biomass. Significant increases in the maximum biosorption capacities (119–180 mg uranium/g biomass) were observed when the pulse field strength was increased from 2.5kV/cm to 3.25kV/cm.     

Cunninghamella echinulata a new biosorbent of metal ions from polluted water in Egypt

Thirty-two fungal species were isolated from a polluted watercourse near the Talkha fertilizer plant, Mansoura Province, Egypt. Aspergillus niger, A. flavus, Cunninghamella echinulata and Trichoderma koningii were isolated frequently. On the basis of its frequency, Cunninghamella echinulata was chosen for biosorption studies. Free and immobilized biomass of C. echinulata sequestered ions in this decreasing sequence is: Pb >Cu >Zn. The effects of biomass concentration, pH and time of contact were investigated. The level of ion uptake rose with increasing biomass. The maximum uptake for lead (45 mg/g), copper (20 mg/g) and zinc (18.8 mg/g) occurred at 200 mg/L biomass. The uptake rose with increasing pH up to 4 in the case of Pb and 5 in the case of Cu and Zn. Maximum uptake for all metals was achieved after 15 min. Ion uptake followed the Langmuir adsorption model, permitting the calculation of maximum uptake and affinity coefficients. Treatment of C. echinulata biomass with NaOH improved biosorbent capacity, as did immobilization with alginate. Immobilized biomass could be regenerated readily by treatment with dilute HCl. The biomass-alginate complex efficiently removed Pb, Zn and Cu from polluted water samples. Therefore,Cunninghamella echinulata could be employed either in free or immobilized form as a biosorbent of metal ions in waste water.     

Biosorption of uranium by cross-linked and alginate immobilized residual biomass from distillery spent wash

Residual biomass from a whiskey distillery was examined for its ability to function as a biosorbent for uranium. Biomass recovered and lyophilised exhibited a maximum biosorption capacity of 165–170?mg uranium/g dry weight biomass at 15?°C. With a view towards the development of continuous or semi-continuous flow biosorption processes it was decided to immobilize the material by (1) cross-linking with formaldehyde and (2) introducing that material into alginate matrices. Cross-linking the recovered biomass resulted in the formation of a biosorbent preparation with a maximum biosorption capacity of 185–190?mg/g dry weight biomass at 15?°C. Following immobilization of biomass in alginate matrices it was found that the total amount of uranium bound to the matrix did not change with increasing amounts of biomass immobilized. It was found however, that the proportion of uranium bound to the biomass within the alginate-biomass matrix increased with increasing biomass concentration. Further analysis of these preparations demonstrated that the alginate-biomass matrix had a maximum biosorption capacity of 220?mg uranium/g dry weight of the matrix, even at low concentrations of biomass.