Properties of an ionic liquid-tolerant <Emphasis Type="Italic">Bacillus</Emphasis><Emphasis Type="Italic">amyloliquefaciens</Emphasis> CMW1 and its extracellular protease

An ionic liquid-tolerant bacterium, Bacillus amyloliquefaciens CMW1, was isolated from a Japanese fermented soybean paste. Strain CMW1 grew in the presence of 10 % (v/v) 1-butyl-3-methylimidazolium chloride ([BMIM]Cl), a commonly used ionic liquid. Additionally, strain CMW1 grew adequately in the presence of the hydrophilic ionic liquids 10 % (v/v) 1-ethyl-3-methylimidazolium trifluoromethanesulfonate ([EMIM]CF₃SO₃) or 2.5 % (v/v) 1-butyl-3-methylimidazolium trifluoromethanesulfonate ([BMIM]CF₃SO₃). Strain CMW1 produced an extracellular protease (BapIL) in the culture medium. BapIL was stable in the presence of 80 % (v/v) ionic liquids, [EMIM]CF₃SO₃, [BMIM]Cl, [BMIM]CF₃SO₃, 1-butyl-3-methylimidazolium tetrafluoroborate, 1-butyl-3-methylimidazolium hexafluorophosphate, and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, and functioned in 10 % (v/v) these ionic liquids. BapIL was stable at pH 4.0–12.6 or in 4004 mM NaCl solution, and exhibited activity in the presence of 50 % (v/v) hydrophilic or hydrophobic organic solvents. BapIL was completely inhibited by 1 mM PMSF and partially by 5 mM EDTA. BapIL belongs to the true subtilisins according to analysis of the deduced amino acid sequence. We showed that BapIL from the ionic liquid-tolerant B. amyloliquefaciens CMW1 exhibited tolerance to ionic liquid and halo, alkaline, and organic solvents.     

Hydrolysis of cellulose in SO₃H-functionalized ionic liquids

Influence of acidity and structure of ionic liquids on microcrystalline cellulose (MCC) hydrolysis was investigated. MnCl₂-containing ionic liquids (ILs) were efficient catalysts and achieved MCC conversion rates of 91.2% and selectivities for 5-hydroxymethyl furfural (HMF), furfural and levulinic acid (LA) of 45.7%, 26.2% and 10.5%, respectively. X-ray diffractometry indicated that catalytic hydrolysis of MCC in ionic liquids resulted in the changes to MCC crystallinity and transformation of cellulose I into cellulose II. SO₃H-functionalized ionic liquids showed higher activities than non-functionalized ILs. The simplicity of the chemical transformation of cellulose provides a new approach for the use this polymer as raw material for renewable energy and chemical industries.     

One-step production of biodiesel from Jatropha oil with high-acid value in ionic liquids

Catalytic conversion of un-pretreated Jatropha oil with high-acid value (13.8 mg KOH/g) to biodiesel was studied in ionic liquids (ILs) with metal chlorides. Several commercial ILs were used to catalyze the esterification of oleic acid. It was found that 1-butyl-3-methylimidazolium tosylate ([BMIm][CH₃SO₃]; a Brønsted acidic IL) had the highest catalytic activity with 93% esterification rate for oleic acid at 140 °C but only 12% biodiesel yield at 120 °C. When FeCl₃ was added to [BMIm][CH₃SO₃], a maximum biodiesel yield of 99.7% was achieved at 120 °C. Because metal ions in ILs supplied Lewis acidic sites, and more of the sites could be provided by trivalent metallic ions than those of bivalent ones. It was also found that the catalytic activity with bivalent metallic ions increased with atomic radius. Mixture of [BMIm][CH₃SO₃] and FeCl₃ was easily separated from products for reuse to avoid producing pollutants.     

An efficient catalytic dehydration of fructose and sucrose to 5-hydroxymethylfurfural with protic ionic liquids

The renewable furan-based platform chemical, 5-hydroxymethylfurfural (HMF), has been efficiently synthesized from d-fructose and sucrose in the presence of a catalytic amount of protic ionic liquids. The 1-methylimidazolium-based and N-methylmorpholinium-based ionic liquids are employed. As a result, 74.8% and 47.5% yields of HMF are obtained from d-fructose and sucrose, respectively, at 90 °C for 2 h under nitrogen atmosphere when N-methylmorpholinium methyl sulfonate ([NMM]⁺[CH₃SO₃]⁻) is used as the catalyst in an N,N-dimethylformamide-lithium bromide (DMF-LiBr) system. The acidities of ionic liquids are determined by the Hammett method, and the correlation between acidity and catalytic activity is discussed. Moreover, the effects of reaction temperature and time are investigated, and a plausible reaction mechanism for the dehydration of d-fructose is proposed.     

Structural evaluation of sugar cane bagasse steam pretreated in the presence of CO2 and SO2

Background

Previous studies on the use of SO₂ and CO₂ as impregnating agent for sugar cane bagasse steam treatment showed comparative and promising results concerning the cellulose enzymatic hydrolysis and the low formation of the inhibitors furfural and hydroxymethylfurfural for the use of CO₂ at 205°C/15 min or SO₂ at 190°C/5 min. In the present study sugar cane bagasse materials pretreated as aforementioned were analyzed by scanning and transmission electron microscopy (SEM and TEM), X-Ray Diffraction (XRD) and Infrared (FTIR spectroscopy) aiming a better understanding of the structural and chemical changes undergone by the pretreated materials.

Results

SEM and TEM data showed that the structural modifications undergone by the pretreatment with CO₂ were less pronounced in comparison to that using SO_2, which can be directly related to the combined severity of each pretreatment. According to XRD data, untreated bagasse showed, as expected, a lower crystallinity index (CI = 48.0%) when compared to pretreated samples with SO₂ (CI = 65.5%) or CO₂ (CI = 56.4%), due to the hemicellulose removal of 68.3% and 40.5%, respectively. FTIR spectroscopy supported SEM, TEM and XRD results, revealing a more extensive action of SO₂.

Conclusions

The SEM, TEM, XRD and FTIR spectroscopy techniques used in this work contributed to structural and chemical analysis of the untreated and pretreated bagasse. The images from SEM and TEM can be related to the severity of SO₂ pretreatment, which is almost twice higher. The crystallinity index values obtained from XRD showed that pretreated materials have higher values when compared with untreated material, due to the partial removal of hemicellulose after pretreatment. FTIR spectroscopy supported SEM, TEM and XRD results. CO₂ can actually be used as impregnating agent for steam pretreatment, although the present study confirmed a more extensive action of SO₂.     

Biodegradation of diesel fuel by a microbial consortium in the presence of 1-alkoxymethyl-2-methyl-5-hydroxypyridinium chloride homologues

Fast development of ionic liquids as gaining more and more attention valuable chemicals will undoubtedly lead to environmental pollution. New formulations and application of ionic liquids may result in contamination in the presence of hydrophobic compounds, such as petroleum mixtures. We hypothesize that in the presence of diesel fuel low-water-soluble ionic liquids may become more toxic to hydrocarbon-degrading microorganisms. In this study the influence of 1-alkoxymethyl-2-methyl-5-hydroxypyridinium chloride homologues (side-chain length from C₃ to C₁₈) on biodegradation of diesel fuel by a bacterial consortium was investigated. Whereas test performed for the consortium cultivated on disodium succinate showed that toxicity of the investigated ionic liquids decreased with increase in side-chain length, only higher homologues (C₈–C₁₈) caused a decrease in diesel fuel biodegradation. As a result of exposure to toxic compounds also modification in cell surface hydrophobicity was observed (MATH). Disulphine blue active substances method was employed to determine partitioning index of ionic liquids between water and diesel fuel phase, which varied from 1.1 to 51% for C₃ and C₁₈ homologues, respectively. We conclude that in the presence of hydrocarbons acting as a solvent, the increased bioavailability of hydrophobic homologues is responsible for the decrease in biodegradation efficiency of diesel fuel.     

γ-Ray-induced degradation of lignocellulosic materials

Lignocellulosic plant materials were treated with various swelling agents and exposed to γ radiation from ⁶⁰Co or ¹³⁷Cs. At dosages of 50 Mrad or above, lignocellulosic materials were extensively degraded and solubilized in water. Addition of water, NaOH, or H₂SO₄ to the substrate increased the degree of solubilization. Complete solubilization was achieved for samples of sugarcane bagasse, newspaper, cotton linters, cotton cloth, sawdust, and α-cellulose powder. About 35% total sugar and 5% reducing sugar per dry weight of sugarcane bagasse could be obtained by this method. Most of the soluble carbohydrates seemed to be disaccharides or larger molecules and glucose degradation products. Solubilization of cellulose was dosage dependent and although the rate of solubilization was increased by adding alkali, released sugar was further decomposed by the alkali and by high dosage of radiation.     

Ionic liquids as a reaction medium for lipase-catalyzed methanolysis of sunflower oil

Ionic liquids, 1-butyl-3-methyl imidazolium hexafluorophosphate ([BMIm][PF₆]) and 1-ethyl-3-methyl imidazolium hexafluorophosphate ([EMIm][PF₆]), were used for the methanolysis of sunflower oil using Candida antarctica lipase (Novozyme 435) and gave yields of fatty acid methyl esters at 98–99% within 10 h. The optimum conditions of methanolysis in hydrophobic ionic liquids are 2% (w/w) lipase, 1:1 (w/w) oil/ionic liquid and 1:8 (mol/mol) oil/methanol at 58–60°C. Methanolysis using hydrophilic ionic liquids, 3-methyl imidazolium tetrafluoroborate ([HMIm][BF₄]) and 1-butyl-3-methyl imidazolium tetrafluoroborate ([BMIm][BF₄]), gave very poor yields. A hydrophobic ionic liquid thus protects the lipase from methanol. Recovered ionic liquids and lipase were used for four successive reaction cycles without any significant loss of activity.     

Alkaline-sulfite pretreatment and use of surfactants during enzymatic hydrolysis to enhance ethanol production from sugarcane bagasse

Sugarcane bagasse is a by-product from the sugar and ethanol industry which contains approximately 70 % of its dry mass composed by polysaccharides. To convert these polysaccharides into fuel ethanol it is necessary a pretreatment step to increase the enzymatic digestibility of the recalcitrant raw material. In this work, sugarcane bagasse was pretreated by an alkaline-sulfite chemithermomechanical process for increasing its enzymatic digestibility. Na₂SO₃ and NaOH ratios were fixed at 2:1, and three increasing chemical loads, varying from 4 to 8 % m/m Na₂SO₃, were used to prepare the pretreated materials. The increase in the alkaline-sulfite load decreased the lignin content in the pretreated material up to 35.5 % at the highest chemical load. The pretreated samples presented enhanced glucose yields during enzymatic hydrolysis as a function of the pretreatment severity. The maximum glucose yield (64 %) was observed for the samples pretreated with the highest chemical load. The use of 2.5 g l^?1 Tween 20 in the hydrolysis step further increased the glucose yield to 75 %. Semi-simultaneous hydrolysis and fermentation of the pretreated materials indicated that the ethanol yield was also enhanced as a function of the pretreatment severity. The maximum ethanol yield was 56 ± 2 % for the sample pretreated with the highest chemical load. For the sample pretreated with the lowest chemical load (2 % m/m NaOH and 4 % m/m Na₂SO₃), adding Tween 20 during the hydrolysis process increased the ethanol yield from 25 ± 3 to 39.5 ± 1 %.     

Fungal rock phosphate solubilization using sugarcane bagasse

The effects of different doses of rock phosphate (RP), sucrose, and (NH₄)₂SO₄ on the solubilization of RP from Araxá and Catal?o (Brazil) by Aspergillus niger, Penicillium canescens, Eupenicillium ludwigii, and Penicillium islandicum were evaluated in a solid-state fermentation (SSF) system with sugarcane bagasse. The factors evaluated were combined following a 2³?+?1 factorial design to determine their optimum concentrations. The fitted response surfaces showed that higher doses of RP promoted higher phosphorus (P) solubilization. The addition of sucrose did not have effects on P solubilization in most treatments due to the presence of soluble sugars in the bagasse. Except for A. niger, all the fungi required high (NH₄)₂SO₄ doses to achieve the highest level of P solubilization. Inversely, addition of (NH₄)₂SO₄ was inhibitory to P solubilization by A. niger. Among the fungi tested, A. niger stood out, showing the highest solubilization capacity and for not requiring sucrose or (NH₄)₂SO₄ supplementation. An additional experiment with A. niger showed that the content of soluble P can be increased by adding higher RP doses in the medium. However, P yield decreases with increasing RP doses. In this experiment, the maximal P yield (approximately 60?%) was achieved with the lower RP dose (3?g?L^?1). Our results show that SSF can be used to obtain a low cost biofertilizer rich in P combining RP, sugarcane bagasse, and A. niger. Moreover, sugarcane bagasse is a suitable substrate for SSF aiming at RP solubilization, since this residue can supply the C and N necessary for the metabolism of A. niger within a range that favors RP solubilization.     

Toward advanced ionic liquids. Polar,enzyme-friendly solvents for biocatalysis

Ionic liquids, also called molten salts, are mixtures of cations and anions that melt below 100°C. Typical ionic liquids are dialkylimidazolium cations with weakly coordinating anions such as (MeOSO₃) or (PF₆). Advanced ionic liquids such as choline citrate have biodegradable, less expensive, and less toxic anions and cations. Deep eutectic solvents are also included in the advanced ionic liquids. Deep eutectic solvents are mixtures of salts such as choline chloride and uncharged hydrogen bond donors such as urea, oxalic acid, or glycerol. For example, a mixture of choline chloride and urea in 1:2 molar ratio liquefies to form a deep eutectic solvent. Their properties are similar to those of ionic liquids. Water-miscible ionic liquids as cosolvents with water enhance the solubility of substrates or products. Although traditional water-miscible organic solvents also enhance solubility, they often inactivate enzymes, while ionic liquids do not. The enhanced solubility of substrates can increase the rate of reaction and often increases the regioor enantioselectivity. Ionic liquids can also be solvents for non-aqueous reactions. In these cases, they are especially suited to dissolve polar substrates. Polar organic solvent alternatives inactivate enzymes, but ionic liquids do not even when they have similar polarities. Besides their solubility properties, ionic liquids and deep eutectic solvents may be greener than organic solvents because ionic liquids are nonvolatile, and can be made from nontoxic components. This review covers selected examples of enzyme catalyzed reaction in ionic liquids that demonstrate their advantages and unique properties, and point out opportunities for new applications. Most examples involve hydrolases, but oxidoreductases and even whole cell reactions have been reported in ionic liquids.     

Environmentally friendly microwave ionic liquids synthesis of hybrids from cellulose and AgX (X = Cl,Br)

The purpose of this article was to explore an environmentally friendly strategy to synthesis of biomass-based hybrids. Herein, microwave-assisted ionic liquids method was applied to fabricate the hybrids from cellulose and AgX (X = Cl, Br) using cellulose and AgNO₃. The ionic liquids act simultaneously as a solvent, a microwave absorber, and a reactant. Ionic liquids provided Cl⁻ or Br⁻ to the synthesis of AgCl or AgBr crystals; thus no additional reactant is needed. The products are characterized by X-ray powder diffraction (XRD), Fourier transform infrared spectrometry (FTIR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and differential thermal analysis (DTA). The cellulose–Ag/AgCl hybrid and cellulose–Ag/AgBr hybrid were also obtained by using cellulose–AgCl and cellulose–AgBr hybrids as precursors. This environmentally friendly microwave-assisted ionic liquids method is beneficial to the hybrids with high dispersion.     

Separation of Tryptophan Enantiomers by Ligand‐Exchange Chromatography With Novel Chiral Ionic Liquids Ligand

Chiral ionic liquids (CILs) with amino acids as cations have been applied as novel chiral ligands coordinated with Cu²⁺ to separate tryptophan enantiomers in ligand exchange chromatography. Four kinds of amino acid ionic liquids, including [L‐Pro][CF₃COO], [L‐Pro][NO₃], [L‐Pro]₂[SO₄], and [L‐Phe][CF₃COO] were successfully synthesized and used for separation of tryptophan enantiomers. To optimize the separation conditions, [L‐Pro][CF₃COO] was selected as the model ligand. Some factors influencing the efficiency of chiral separation, such as copper ion concentration, CILs concentration, methanol ratio (methanol/H₂O, v/v), and pH, were investigated. The obtained optimal separation conditions were as follows: 8.0 mmol/L Cu(OAc)₂, 4.0 mmol/L [L‐Pro][CF₃COO] ,and 20% (v/v) methanol at pH 3.6. Under the optimum conditions, acceptable enantioseparation of tryptophan enantiomers could be observed with a resolution of 1.89. The results demonstrate the good applicability of CILs with amino acids as cations for chiral separation. Furthermore, a comparative study was also conducted for exploring the mechanism of the CILs as new ligands in ligand exchange chromatography. Chirality 26:160–165, 2014. © 2014 Wiley Periodicals, Inc.     

Production of Fermentable Sugars and Hydrogen-Rich Gas from <Emphasis Type="Italic">Agave tequilana</Emphasis> Biomass

The Mexican tequila industry annually processes approximately 1 × 10⁶ Agave tequilana plants, generating approximately 1.78 × 10⁸ kg of bagasse per year. This biomass is considered an attractive alternative to fossil fuels as an energy source and to produce biofuels and/or chemical products because it is produced and used without adversely affecting the environment. The first aim of the present work was to determine the effect of temperature, the concentration of H₂SO_4, and reaction time on the hydrolysis of agave bagasse to maximize the fermentable sugars using a steam explosion. This step process generated 71.11 g/L of reducible sugars in the supernatant (59.29 % glucose, 29.05 % xylose, and 11.66 % fructose) and unconverted organic matter of enzymatic hydrolysis bagasse (35.4 % α-cellulose, 7.33 % hemicellulose, 49.91 % lignin, and 7.31 % ashes). A mathematical surface response analysis of the hydrolysis was used for process optimization. The second aim involves the study of the thermodynamics of the reforming of unconverted organic matter from enzymatic hydrolysis of Agave tequilana bagasse (ATB) evaluated by the Gibbs free energy minimization method for hydrogen production. The effect of the parameters on the system performance measures, such as reaction temperature (T), Water/Biomass ratio (WBR), and pressure (P), were also investigated. The maximum H₂ production obtained was 23.2 mol of H₂/271.5 g ATB with a WBR ≥ 11 and a temperature of 740 °C. These findings indicate that the temperature and WBR are essential factors in the production of H₂, which was reflected in the efficiency of the process.     

The effect of biomass moisture content on bioethanol yields from steam pretreated switchgrass and sugarcane bagasse

This study aimed to determine the effect of moisture content of three different feedstocks on overall ethanol yield. Switchgrass and sugarcane bagasse from two sources were either soaked in water (∼80% moisture) or left dry (∼12% moisture), and half each of these were impregnated with 3% w/w SO₂ and all were steam pretreated. The twelve resulting substrates were compared based on overall sugar recovery after pretreatment, cellulose conversion following enzymatic hydrolysis, and ethanol yield following simultaneous saccharification and fermentation. The overall ethanol yield after simultaneous saccharification and fermentation of hexoses was 18-28% higher in samples that were soaked prior to SO₂ addition than in SO₂-catalyzed samples that were not soaked. In samples that were uncatalyzed, soaking made little difference, indicating that the positive effect of increased moisture content may be related to increased permeability of the biomass to SO₂.     

Chiral Discrimination by Ionic Liquids: Impact of Ionic Solutes

Chiral ionic liquids hold promise in many asymmetric applications. This study explores the impact of ionic solutes on the chiral discrimination of five amino acid methyl ester‐based ionic liquids, including L‐ and D‐alanine methyl ester, L‐proline methyl ester, L‐leucine methyl ester, and L‐valine methyl ester cations combined with bis(trifluoromethanesulfonimide) anion. Circularly polarized luminescence spectroscopy was used to study the chiral discrimination by measuring the racemization equilibrium of a dissymmetric europium complex, Eu(dpa)₃^3? (where dpa = 2,6‐pyridinedicarboxylate). The chiral discrimination measured was dependent on the concentration of Eu(dpa)₃^3? and this concentration‐dependence was different in each of the ionic liquids. Ionic liquids with L‐leucine methyl ester and L‐valine methyl ester even switched enantiomeric preference based on the solute concentration. Changing the cation of the Eu(dpa)₃^3? salt from tetrabutylammonium to tetramethylammonium ion also affected the chiral discrimination demonstrated by the ionic liquids. Chirality 27:320–325, 2015. © 2015 Wiley Periodicals, Inc.     

Pseudomonas cepacia lipase catalyzed esterification and transesterification of 3-(furan-2-yl) propanoic acid/ethyl ester: A comparison in ionic liquids vs hexane

A comparison of the Pseudomonas cepacia lipase (lipase PS) catalyzed esterification of 3-(furan-2-yl) propanoic acid and transesterification of ethyl 3-(furan-2-yl) propanoate with six straight chain alcohols (propanol to octanol) in ionic liquids and hexane was carried out. The ionic liquids selected, [Bmim]BF₄, [Bmim]PF₆, and [Bmim]Tf₂N, consisted of an identical cation and different anions. This is the first report on the biocatalyzed synthesis of these esters. In all the media, lipase PS catalyzed esterification of 3-(furan-2-yl) propanoic acid resulted in high yields of the esters compared to the transesterification of ethyl 3-(furan-2-yl) propanoate. [Bmim]Tf₂N proved to be the best; yielding 98–67% of the product by lipase PS catalyzed esterification. The lipase PS–[Bmim]Tf₂N and lipase PS–[Bmim]PF₆ mixture was recycled five times without any decrease in the yields of the products and was found to be operationally stable up to 10 months at room temperature.     

Tyrosinase activity in ionic liquids

Activity of mushroom tyrosinase was studied in three ionic liquids, 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIm][PF₆]), 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIm][BF₄]) and 1-butyl-3-methylimidazolium methylsulfate ([BMIm][MeSO₄]), and was compared to that in chloroform. Kinetic parameters of the enzyme were determined and the results indicate that the enzyme in ionic liquids basically follows the same catalytic mechanism as in water, and that the ionic liquids may affect the enzyme activity by direct interacting with the enzyme and thus hindering the E–S binding due to their high hydrophilicity and polarity.     

The effects of high concentrations of ionic liquid on GB1 protein structure and dynamics probed by high-resolution magic-angle-spinning NMR spectroscopy

Ionic liquids have great potential in biological applications and biocatalysis, as some ionic liquids can stabilize proteins and enhance enzyme activity, while others have the opposite effect. However, on the molecular level, probing ionic liquid interactions with proteins, especially in solutions containing high concentrations of ionic liquids, has been challenging. In the present work the ¹³C, ¹⁵N-enriched GB1 model protein was used to demonstrate applicability of high-resolution magic-angle-spinning (HR-MAS) NMR spectroscopy to investigate ionic liquid–protein interactions. Effect of an ionic liquid (1-butyl-3-methylimidazolium bromide, [C₄-mim]Br) on GB1was studied over a wide range of the ionic liquid concentrations (0.6–3.5 M, which corresponds to 10–60% v/v). Interactions between GB1 and [C₄-mim]Br were observed from changes in the chemical shifts of the protein backbone as well as the changes in ¹⁵N ps-ns dynamics and rotational correlation times. Site-specific interactions between the protein and [C₄-mim]Br were assigned using 3D methods under HR-MAS conditions. Thus, HR-MAS NMR is a viable tool that could aid in elucidation of molecular mechanisms of ionic liquid–protein interactions.     

DABCO-based chiral ionic liquids as recoverable and reusable organocatalyst for asymmetric Diels–Alder reaction

New DABCO-based chiral ionic liquids were synthesized and evaluated in asymmetric Diels–Alder reaction of cyclopentadiene with α,β-unsaturated aldehydes or 4-phenyl-3-buten-2-one. Chiral ionic liquid of modified MacMillan catalyst having a DABCO cation and hexafluorophosphate anion acts as organocatalyst (5 mol%) for the Diels–Alder reaction of crotonaldehyde and cyclopentadiene producing 98% of the product and 87% ee (endo) in CH₃CN/H₂O (95/5) at 25°C in 2 h. The scope and limitations of the catalysis were also studied by using cyclopentadiene and α,β-unsaturated aldehydes, and the Diels–Alder products were obtained in 18%–92% yields with 68%–93% ee. The catalyst was recycled and reused up to 6 cycles with a slight drop in ee and conversion of the product.