Production of an acidic and thermostable lipase of the mesophilic fungus Penicillium simplicissimum by solid-state fermentation

The production of a lipase by a wild-type Brazilian strain of Penicillium simplicissimum in solid-state fermentation of babassu cake, an abundant residue of the oil industry, was studied. The enzyme production reached about 90 U/g in 72 h, with a specific activity of 4.5 U/mg of total proteins. The crude lipase showed high activities at 35–60 °C and pH 4.0–6.0, with a maximum activity at 50 °C and pH 4.0–5.0. Enzyme stability was enhanced at pH 5.0 and 6.0, with a maximum half-life of 5.02 h at 50 °C and pH 5.0. Thus, this lipase shows a thermophilic and thermostable behavior, what is not common among lipases from mesophilic filamentous fungi. The crude enzyme catalysed the hydrolysis of triglycerides and p-nitrophenyl esters (C4:0–C18:0), preferably acting on substrates with medium-chain fatty acids. This non-purified lipase in addition to interesting properties showed a reduced production cost making feasible its applicability in many fields.     

Enantioselective esterification of glycidol by surfactant-lipase complexes in organic media

Enantioselective esterification of glycidol has been performed with lauric acid in organic media dosed with surfactant-lipase complexes as catalysts. Lipase derived from various biomaterial sources was complexed with nonionic surfactant, dioleyl-N-D-glucono-L-glutamate, prior to use. Surfactant-lipase D (from Rhizopus delemar) complex had a higher enantioselectivity (v R /v S = 7.6) than the other lipases and the corresponding initial reaction rate was averaging 100-fold better than that of native powder lipase D in cyclohexane at 35°C.     

Hydrolysis of vegetable oils and triglycerides by thermotolerant and zoopathogenic species ofAspergillus from Nigerian palm produce

The ability ofAspergillus fumigatus Fres. andAspergillus nidulans (Eidam) Wint obtained from Nigerian palm produce to degrade vegetable oils and triglycerides and the production and activity of their extracellular lipases were studied. Both species readily hydrolysed palm oil and palm kernel oil among others liberating free fatty acids in the process. Good growth with mycelia production of both fungi were also recorded on the triglycerides used as sources of carbon at 37 °C with the best results obtained on palmitic and oleic acids, the predominant fatty acids in palm oil. Extracellular lipases were detected in the culture filtrates of both fungi within 48 h of incubation on an oat-meal chaff medium at 37 °C. Peak enzyme production occurred within the 10-day incubation period. The upases of both fungal species were most active at a pH of 5.6 and a temperature of 45 °C. The best glyceride for assaying the lipase activities of these fungi was trihexanoin while palm oil was a better vegetable oil than the conventional groundnut oil used for the same purpose. Because of the zoopathogenic nature of these fungi, attention is drawn to the potential health risks which their presence on the palm products where they were obtained pose to the consumers.     

Heat and lime-treatment as effective control methods for E. coli O157:H7 in organic wastes

Land-application of abattoir wastes is economically appealing and may provide an effective means of closing the nutrient cycling loop. This practise is constrained, however, by legislation which necessitates pre-treatment to remove pathogenic micro-organisms prior to land-spreading. Here we investigated whether heat-treatment or lime addition could eliminate Escherichia coli O157:H7 from three contrasting abattoir wastes. We found that treatment at 60 °C for 10 min effectively eradicated the organism while treatment for the same length of time at 50 °C led to 2–4 log reductions, but not a complete kill. Temperatures of 72 °C induced waste solidification rendering its use impractical. The potential for re-growth in heat-treated and untreated wastes was also investigated. Survival was significantly greater in heat-treated wastes, although the difference was less than half a log unit in magnitude. This effect of heat-treatment on pathogen survival appeared to be ameliorated when wastes were mixed with soil. No viable E. coli O157:H7 cells were recovered from any waste after application of lime (CaO) at a rate of 10 g l⁻¹, even after enrichment. Our results indicate that pasteurisation-style or liming treatments may provide a suitable alternative method for reducing pathogen loads in abattoir wastes, so that they can be applied to land with minimal biological risk.     

Alexandrium ostenfeldii growth and spirolide production in batch culture and photobioreactor

Growth and spirolide production of the toxic dinoflagellate Alexandrium ostenfeldii (Danish strain CCMP1773) were studied in batch culture and a photobioreactor (continuous cultures). First, batch cultures were grown in 450 mL flasks without aeration and under varying conditions of temperature (16 and 22 °C) and culture medium (L1, f/2 and L1 with addition of soil extract). Second, cultures were grown at 16 °C in 8 L aerated flat-bottomed vessels using L1 with soil extract as culture medium. Finally, continuous cultures in a photobioreactor were conducted at 18 °C in L1 with soil extract; pH was maintained at 8.5 and continuous stirring was applied.This study showed that A. ostenfeldii growth was significantly affected by temperature. At the end of the exponential phase, maximum cell concentration and cell diameter were significantly higher at 16 °C than at 22 °C. In batch culture, maximum spirolide quota per cell (approx. 5 pg SPX 13-desMeC eq cell⁻¹) was detected during lag phase for all conditions used. Spirolide quota per cell was negatively and significantly correlated to cell concentration according to the following equation: y = 4013.9x^−0.858. Temperature and culture medium affected the spirolide profile which was characterized by the dominance of 13,19-didesMeC (29–46%), followed by SPX-D (21–28%), 13-desMeC (21–23%), and 13-desMeD (17–21%).Stable growth of A. ostenfeldii was maintained in a photobioreactor over two months, with maximum cell concentration of 7 × 10⁴ cells mL⁻¹. As in batch culture, maximum spirolide cell quota was found in lag phase and then decreased significantly throughout the exponential phase. Spirolide cell quota was negatively and significantly correlated to cell concentration according to the equation: y = 12,858x^−0.8986. In photobioreactor, spirolide profile was characterized by higher proportion of 13,19-didesMeC (60–87%) and lower proportions of SPX-D (3–12%) and 13-desMeD (1.6–10%) as compared to batch culture.     

Substrate specificities in hydrolysis of polyhydroxyalkanoates by microbial esterases

Summary Enzymatic degradations of 5 different polyhydroxyalkanoates (PHA) were investigated at 37°C in the aqueous solutions (pH 7.4) containing different microbial enzymes of 16 lipases and 5 PHA depolymerases. The substrate specificities of microbial PHA depolymerases on hydrolysis of polyhydroxyalkanoates were distinguished from those of microbial lipases.     

Adding value to a toxic residue from the biodiesel industry: production of two distinct pool of lipases from <Emphasis Type="Italic">Penicillium simplicissimum</Emphasis> in castor bean waste

In countries with a strong agricultural base, such as Brazil, the generation of solid residues is very high. In some cases, these wastes present no utility due to their toxic and allergenic compounds, and so are an environmental concern. The castor bean (Ricinus communis) is a promising candidate for biodiesel production. From the biodiesel production process developed in the Petrobras Research Center using castor bean seeds, a toxic and alkaline waste is produced. The use of agroindustrial wastes in solid-state fermentation (SSF) is a very interesting alternative for obtaining enzymes at low cost. Therefore, in this work, castor bean waste was used, without any treatment, as a culture medium for fungal growth and lipase production. The fungus Penicillium simplicissimum was able to grow and produce an enzyme in this waste. In order to maximize the enzyme production, two sequential designs–Plackett-Burman (variable screening) followed by central composite rotatable design (CCRD)—were carried out, attaining a considerable increase in lipase production, reaching an activity of 155.0 U/g after 96 h of fermentation. The use of experimental design strategy was efficient, leading to an increase of 340% in the lipase production. Zymography showed the presence of different lipases in the crude extract. The partial characterization of such extract showed the occurrence of two lipase pools with distinct characteristics of pH and temperature of action: one group with optimal action at pH 6.5 and 45°C and another one at pH 9.0 and 25°C. These results demonstrate how to add value to a toxic and worthless residue through the production of lipases with distinct characteristics. This pool of enzymes, produced through a low cost methodology, can be applied in different areas of biotechnology.     

Comparative study of amylolytic enzymes production byAspergillus niger in liquid and solid-state cultivation

Summary Amylolytic enzymes produced by a strain ofAspergillus niger cultivated on cassava starch in liquid or solid culture were found to be mainly glucoamylases. For the same initial amount of substrate, the glucoamylase activity increased even after 60 h of culture on solid medium whereas it decreased in liquid culture. Some characteristics of the amylases produced in both culture conditions were compared. The pH optima for enzymes produced in solid and liquid cultures were 4.5 and 5.0 respectively. Glucoamylase synthetized in solid cultures was significantly more thermostable than that from liquid culture and was maximally active at 70°C compared to 50°C for the enzyme from liquid cultures. The Km values expressed as mg soluble starch/100 ml were 0.1% for crude enzyme from solid culture and 0.057% for crude enzyme from liquid culture.     

Conditions for Cultivation of the Fungus Penicillium melinii UzLM-4 and Its Biosynthesis of Lipases

Cultivation of the fungus Penicillium melinii UzLM-4 on a Raistrick's medium of our own modification made it possible to increase the biosynthesis of lipases by three to four times. The following conditions ensured a high rate of synthesis of the extracellular lipase: age of the inoculum, 15 days; concentration of the inoculum, 15 × 10⁶ conidia per 100 ml medium; initial pH of the nutrient medium, 8.0; and cultivation in a shaker at 150 rpm and 25°C.     

Application of adsorption isotherms to chromium adsorption onZ.ramigera

Summary Adsorption isotherms for the adsorption of chromium onZoogloea ramigera are developed. The rates were affected by the pH and temperature of adsorption medium. The biomass ofZ. ramigera at pH 2.0 where the optimum pH for biosorption lies exhibited the highest chromium adsorptive uptake capacity. In general, higher adsorptive uptake was observed at 25°C than 35°C and 45°C.     

Enhanced production and characterization of a highly thermostable alkaline protease from Bacillus sp. P-2

An obligatory alkalophilic Bacillus sp. P-2, which produced a thermostable alkaline protease was isolated by selective screening from water samples. Protease production at 30 °C in static conditions was highest (66 U/ml) when glucose (1% w/v) was used with combination of yeast extract and peptone (0.25% w/v, each), in the basal medium. Protease production by Bacillus sp. P-2 was suppressed up to 90% when inorganic nitrogen sources were supplemented in the production medium. Among the various agro-byproducts used in different growth systems (solid state, submerged fermentation and biphasic system), wheat bran was found to be the best in terms of maximum enhancement of protease yield as compared to rice bran and sunflower seed cake. The protease was optimally active at pH 9.6, retaining more than 80% of its activity in the pH range of 7–10. The optimum temperature for maximum protease activity was 90 °C. The enzyme was stable at 90 °C for more than 1h and retained 95 and 37% of its activity at 99 °C and 121 °C, respectively, after 1 h. The half-life of protease at 121 °C was 47 min.     

Bimutation breeding of Aspergillus niger strain for enhancing β-mannanase production by solid-state fermentation

A parent strain Aspergillus niger LW-1 was mutated by the compound mutagenesis of vacuum microwave (VMW) and ethyl methane sulfonate (EMS). A mutant strain, designated as A. niger E-30, with high- and stable-yield β-mannanase was obtained through a series of screening. The β-mannanase activity of the mutant strain E-30, cultivated on the basic fermentation medium at 32 °C for 96 h, reached 36,675 U/g dried koji, being 1.98-fold higher than that (18,501 U/g dried koji) of the parent strain LW-1. The purified E-30 β-mannanase, a glycoprotein with a carbohydrate content of 19.6%, had an apparent molecular weight of about 42.0 kDa by SDS–PAGE. Its optimal pH and temperature were 3.5 and 65 °C, respectively. It was highly stable at a pH range of 3.5–7.0 and at a temperature of 60 °C and below. The kinetic parameters K_m and V_max, toward locust bean gum and at pH 4.8 and 50 °C, were 3.68 mg/mL and 1067.5 U/mg, respectively. The β-mannanase activity was not significantly affected by an array of metal ions and EDTA, but strongly inhibited by Ag⁺ and Hg²⁺. In addition, the hydrolytic conditions of konjak glucomannan using the purified E-30 β-mannanase were optimized as follows: konjak gum solution 240 g/L (dissolved in deionized water), hydrolytic temperature 50 °C, β-mannanase dosage 120 U/g konjak gum, and hydrolytic time 8 h.     

Effect of hot-water extraction on alkaline pulping of bagasse

The effect of hot-water extraction on alkaline pulping was investigated. The properties of black liquor and pulp strength of bagasse were analyzed. The extraction was conducted at 160 °C for 30 min where 13.2% of the mass was dissolved in the extraction liquor. Untreated bagasse and extracted bagasse were digested by soda and soda-AQ processes at 17% and 15.5% (with 0.1% AQ) alkali charge (NaOH). Cooking temperatures were 160 °C and 155 °C respectively. The pulp from extracted bagasse had a lower Kappa number and a higher viscosity compared to the pulp from the untreated bagasse. The black liquor from pulping extracted bagasse had a lower solid content, a lower viscosity and a lower silica content, but a higher heating value than that from pulping of untreated bagasse. Hot-water extraction resulted in a significant decrease in bleaching chemical consumption and the formation of chlorinated organics. Pulp strength properties such as the tensile index and the burst index were found to be lower, but the tear index, bulk, opacity and pulp freeness were found to be higher when hot-water extraction was applied.     

pH dependence and thermostability of lipases from cultures from the ARS culture collection

Summary Previously we used a simple, sensitive agar plate method to screen lipase activity from 1229 selected cultures including 508 bacteria, 479 yeasts, 230 actinomycetes and 12 fungi covering many genera and species. About 25% of the cultures tested were lipase-positive. These lipase-positive strains were further classified as good, moderate or weak enzyme producers. We have expanded our screening method to focus specifically on the pH dependence and thermostability of these lipase activities. The lipases exhibited various pH sensitivities and were divided into three groups: (i) lipases which are active at pH 5.5 but not at pH 7.5—produced by 36 bacteria, 23 yeasts and four actinomycetes; (ii) lipases which are active at pH 7.5 but not at pH 5.5—produced by 17 bacteria, four yeasts, two actinomycetes and one fungus; and (iii) lipases which are active at both pH 5.5 and pH 7.5—produced by 112 bacteria, 90 yeasts, 15 actinomycetes and five fungi. By screening at 60°C and pH 9.0, we further identified 50 bacteria and 26 yeasts that produce thermostable alkali-tolerant lipases. Product analyses confirmed our screening results. Lipases with specific pH dependency and thermostability have potential to be developed into industrial enzymes.     

Characterization of two novel lipase genes isolated directly from environmental sample

Two novel lipase genes (lipJ02, lipJ03) were isolated directly from environmental DNA via genome-walking method. Lipase gene lipJ02 contained an open reading frame (ORF) of 1,425 bp and encoded a 474-amino acids lipase protein, while lipase gene lipJ03 contained an ORF of 1,413 bp and encoded a 470-amino acids lipase protein. The lipase genes were cloned into expression vector pPIC9K and successfully integrated into a heterologous fungal host, Pichia pastoris KM71, and the recombinant P. pastoris were screened via a high-throughput method. The recombinants were induced by methanol to secrete active lipases into cultural medium. The recombinant lipases were also purified and characterized. The optimum temperature for the purified lipase LipJ02 and LipJ03 was 30 and 35°C, respectively, at pH 8.0. They exhibited similar thermostability, but LipJ02 exhibited better pH stability than LipJ03.     

Evaluation of kappa carrageenan as a substitute for agar in microbiological media

Seventy-one samples of the colloid kappacarrageenan extracted from 12 seaweed species were subjected to a number of standard physical demands of solid bacteriological culture media. All samples had a lower melting temperature (less than 67° C) than agar and a gelling (setting) temperature between 16° C and 51° C, some the same and others lower or higher than agar. Temperature spreads were narrow (ca 10° C) to broad (ca 30° C), depending on the seaweed source, but none were as broad as that of agar (ca 40° C). The majority of commercially prepared samples held a slant when incubated at 37° C, but California seaweed colloids were best at 28° C in this test. The majority of samples released little to no water of syneresis in slant tests as well as in plates. Some plates prepared with the colloid were crystal clear as compared to agar plates. All test microorganisms grew as well on kappa-carrageenan media as on agar media. Some media responses could be attributable to the seaweed species, but others could be traced to chemical extraction methods and modification of the colloid.     

Two acidothermotolerant lipases from new variants of Bacillus spp.

Two acidothermotolerant lipases from new isolates of Bacillus stearothermophilus SB-1 and Bacillus licheniformis SB-3 are reported. In addition, a thermotolerant, neutral lipase from Bacillus atrophaeus SB-2 that hydrolyses castor oil is also reported. The lipase from B. stearothermophilus SB-1 retained 70% activity and that from B. licheniformis SB-3 retained 50% activity at pH 3.0 at 50 °C. In addition, at 100 °C B. stearothermophilus SB-1 lipase had a half life of 25 min at pH 3.0 and 15 min at pH 6.0. Lipase activity was markedly stimulated by glycerol in case of B. stearothermophilus SB-1 and by diethylether in cases of B. atrophaeus SB-2 and B. licheniformis SB-3. The lipases varied in their substrate specificity towards triacylglycerols. The rate of hydrolysis of neem oil with B. stearothermophilus SB-1 and B. atrophaeus SB-2 lipases was, respectively, nearly 4-fold and 2-fold more than with olive oil.     

Three New Lipases from Actinomycetes and Their Use in Organic Reactions

Three novel lipase-producing microorganisms have been isolated from 526 actinomycete strains by employing screening techniques on solid media. Time-course and scale-up of enzyme production were analyzed. The lipases, produced by microorganisms belonging to the Streptomyces genus, were tested in several reactions in organic medium using unnatural substrates. The lyophilized crude lipases are stable at least for 1 month at 4°C (100% recovered activity). The lipase activity per milliliter of cell culture broth was higher than described in the literature for other lipases from actinomycetes. The three selected lipases displayed better activity than commercial lipase from Candida rugosa in the resolution of chiral secondary alcohols. The lipase from S. halstedii also displayed very good activity in the synthesis of carbamates.     

Production of extracellular alkaline proteases by <Emphasis Type="Italic">Aspergillus clavatus</Emphasis>

Summary The production of extracellular alkaline proteases from Aspergillus clavatus was evaluated in a culture filtrate medium, with different carbon and nitrogen sources. The fungus was cultivated at three different temperatures during 10 days. The proteolytic activity was determined on casein pH 9.5 at 37 °C. The highest alkaline proteolytic activity (38 U/ml) was verified for culture medium containing glucose and casein at 1% (w/v) as substrates, obtained from cultures developed at 25 °C for 6 days. Cultures developed in Vogel medium with glucose at 2% (w/v) and 0.2% (w/v) NH₄NO₃ showed higher proteolytic activity (27 U/ml) when compared to the cultures with 1% of the same sugar. Optimum temperature was 40 °C and the half-lives at 40, 45 and 50 °C were 90, 25 and 18 min, respectively. Optimum pH of enzymatic activity was 9.5 and the enzyme was stable from pH 6.0 to 12.0.     

Isolation and characterization of latent and active polyphenoloxidase in BRS Clara (CNPUV 154-147 × Centennial seedless) and BRS Morena (Marroo seedless × Centennial seedless) seedless table grapes

The seedless grapes BRS Clara and BRS Morena, developed in Brazil, are currently growing in popularity due to their premium texture and taste. However, there are no reports on the polyphenoloxidase (PPO) from these cultivars. In this paper, active and latent PPO from BRS Clara and BRS Morena seedless grapes were extracted using the non-ionic detergents Triton-X-100 (active) and Triton-X-114 (latent), and their catecholase activities were characterized. The PPO extracted using Triton-X-110 exhibited maximum activities at pH 6.0 and at 25 °C. Above 30 °C, a gradual decline in activities was noted, with complete inactivation at 60 °C. The PPO from grapes extracted with Triton-X-114 was activated with 0.2% of the ionic detergent sodium dodecyl sulfate (SDS), and exhibited maximum activities at pH 5.5 and at 30 °C. It was stable until the temperature reached 60 °C.