Influence of familiarization on the reliability of vertical jump and acceleration sprinting performance in physically active men

The purpose of the present study was to determine the number of familiarization sessions required to obtain an accurate measure of reliability associated with loaded vertical jump and 20-m sprint running performance. Ten physically active men attended 5 separate testing sessions over a 3-week period where they performed unloaded and loaded (10-kg extra load) countermovement (CMJ) and static (SJ) jumps, followed by straight-line 20-m sprints. Jump height was recorded for the vertical jumps using a jump mat, while the time for 10 m and 20 m was recorded during the sprints using photocells. The highest (jump conditions) and fastest (sprint) of 3 trials performed during each of the 5 testing sessions was used in the subsequent analysis. Familiarization was assessed using the scores obtained during the 5 separate testing sessions. Reliability was assessed by calculating intraclass correlation coefficients (ICCs) and coefficient of variation (CV). No significant differences were obtained between the testing sessions for any of the measures. ICCs ranged from 0.89 to 0.95, while CVs ranged from 1.9 to 2.6%. These results indicate that high levels of reliability can be achieved without the need for familiarization sessions when using loaded and unloaded CMJ and SJ and 20-m sprint performance with physically active men.     

Validation of an electronic jump mat to assess stretch-shortening cycle function

The purpose of this investigation was to determine the concurrent validity of a commonly used electronic switch mat (ESM), or jump mat, compared with force plate (FP) data. The efficiency of collection and accuracy of data are paramount to athlete and player field testing for the strength and conditioning coach who often has access only to a jump mat. Ten subjects from 5 different sporting backgrounds completed 3 squat jumps (SJs), 3 countermovement jumps (CMJs), and 3 drop jumps (DJs). The jumps were performed on an AMTI FP operating at 1,000 Hz with an ESM positioned on top of the platform. All the subjects were experienced with the protocols involved with jump testing. The resulting absolute errors between FP and ESM data were 0.01, 0.02, and 0.01 m for CMJ, SJ, and DJ heights, respectively. However, the coefficient of variation for the DJ contact time (CT) was 57.25%, CMJ (r = 0.996), and SJ (r = 0.958) heights correlated very strongly with force platform data, and DJ data were not as strong (r = 0.683). Confidence interval tests revealed bias toward CMJ and SJ (p < 0.05). The jump mat can accurately calculate the CMJ height, SJ height, and reactive strength index for all the 3 jump protocols. However, the faster CTs and rapid movements involved in a DJ may limit its reliability when giving measures of CT, flight time, and height jumped for DJs. Strength and conditioning coaches can use such a jump mat device with the confidence that it is accurately producing valid measurements of their athlete's performance for CMJ and SJ slow SSC protocols.     

Test-retest reliability of three different countermovement jumping tests

In studies of physical performance comprising muscle strength and power, a vertical jump is a test method that frequently is used. It is important to have access to accurate measuring tools providing data with high reproducibility. Studies have shown that body composition also may play an important part in physical performance. The purpose of this study was to determine test-retest reliability for 3 different kinds of vertical jumps and to correlate jump height with body composition. Thirty-four normally trained subjects (women n = 17) between 18 and 25 years participated. Test-retest, on 3 kinds of vertical jumps, was performed with a median of 7 days between jumps. Methods used were a countermovement jump (CMJ) on a contact mat, with and without arm swing, and an Abalakow jump (AJ) using measuring tape, with arm swing. Body composition was assessed with the use of bioelectric impedance analysis. The results showed that high intraclass correlation coefficients (ICCs) were observed between testing occasions for all 3 vertical jumps (ICC between 0.48 and 0.88). The AJ in women presented the lowest ICC. Also the correlation between CMJ and AJ was high (rs = 0.88). Moderate-to-high correlations could be shown between body composition and CMJ in women (rs = -0.57-0.76). In conclusion, very high test-retest reliability for CMJ on a contact mat was found. For the AJ using a measuring tape, ICC were overall high, but a moderate nonsignificant ICC were found in women, indicating poor reproducibility. The data from the CMJ and AJ may be compared if approximately 25% of the AJ value is subtracted. In practice, this means that vertical jump tests have high reproducibility and can be used as measures of power development.     

Training specificity of hurdle vs. countermovement jump training

The objective of this study was to compare bilateral and unilateral hurdle jumps with traditional countermovement jumps (CMJs). Thirteen athletes were tested during continuous forward bilateral and unilateral hurdle jumps and single CMJ. Countermovement jump height was used to establish the hurdle height. Subjects jumped forward over 4 hurdles with the force plate positioned after the second hurdle to measure vertical ground reaction force (VGRF), contact time (CT), and rate of force development (RFD). For bilateral jumps, hurdle height was established at maximal (100%) CMJ height and at 120, 140, and 160% of the CMJ height. The athletes were instructed to jump as fast as possible to mimic a training session drill. For unilateral jumps, hurdle height was set at 70, 80, and 90% of the CMJ height. Bilateral 160% jumps showed a significantly longer CT than bilateral 100, 120, and 140% jumps. The bilateral 100, 120, and 140% jumps had significantly shorter CT than the unilateral jumps and CMJ. The VGRF during bilateral jumps was higher than unilateral jumps and CMJ. Bilateral 160% jump RFD was significantly higher than CMJ and unilateral jumps but significantly lower than the other bilateral jumps. In conclusion, the characteristics of the bilateral jumps were substantially different from those of the CMJ and unilateral hurdle jumps. As bilateral hurdle jumps with a height between 100 and 140% of the CMJ provide similar CTs and VGRF as many reported sprint or jump actions, they may be considered a more training-specific power training drill than the CMJ.     

Inter-device reliability of wearable technology for quantifying jump height in collegiate athletes

The purpose of this study was to evaluate the inter-device reliability of three VERT devices (Mayfonk Athletic, Florida, USA) when worn on the waist (W), left-hip (LH), and right-hip (RH) during single- and double-leg counter movement jumps (CMJ) in collegiate athletes. Thirty-two female and twenty-eight male NCAA Division II athletes (n = 60) participated in the present study. Jump height (JH) values for double-leg CMJs were analyzed by each device using a one-way repeated measures ANOVA whereas a 2 (jump leg) x 3 (wear location) repeated measures ANOVA was employed to evaluate single-leg CMJs. Reliability of the VERT devices were based upon intraclass correlation coefficients (ICC). Double-leg CMJs revealed an excellent ICC between all three VERT devices (ICC = 0.969). However, JH for RH and LH (45.69 ± 9.84 and 45.82 ± 10.45 cm, respectively) were on average lower than W (50.44 ± 12.37cm; both p < 0.001). The ICCs were excellent for right- and left-leg CMJs (ICC = 0.939 and 0.941, respectively). However, an interaction was observed (p < 0.001). No differences existed for left- or right-leg when VERT was worn on the waist. However, JH was higher when VERT devices were worn on the opposite hip of the jump leg (i.e., LH>RH for right-leg CMJs; RH>LH for leftleg CMJs; all p < 0.001). Results suggest that LH and RH are interchangeable for double-leg CMJs, but not with waist despite excellent reliability. In addition, all wear locations provided excellent ICCs for single-leg CMJs. However, waist provides more consistent JH values for right- and left-leg CMJs while RH and LH show more variability.     

The effect of dropping height on jumping performance in trained and untrained prepubertal boys and girls

Plyometric training in children, including different types of jumps, has become common practice during the last few years in different sports, although there is limited information about the adaptability of children with respect to different loads and the differences in performance between various jump types. The purpose of this study was to examine the effect of gender and training background on the optimal drop jump height of 9- to 11-year-old children. Sixty prepubertal (untrained and track and field athletes, boys and girls, equally distributed in each group [n = 15]), performed the following in random order: 3 squat jumps, 3 countermovement jumps (CMJs) and 3 drop jumps from heights of 10, 20, 30, 40, and 50 cm. The trial with the best performance in jump height of each test was used for further analysis. The jump type significantly affected the jump height. The jump height during the CMJ was the highest among all other jump types, resulting in advanced performance for both trained and untrained prepubertal boys and girls. However, increasing the dropping height did not change the jumping height or contact time during the drop jump. This possibly indicates an inability of prepubertal children to use their stored elastic energy to increase jumping height during drop jumps, irrespective of their gender or training status. This indicates that children, independent of gender and training status, have no performance gain during drop jumps from heights up to 50 cm, and therefore, it is recommended that only low drop jump heights be included in plyometric training to limit the probability of sustaining injuries.     

The influence of familiarization on the reliability of force variables measured during unloaded and loaded vertical jumps

The purpose of this study was to determine the number of familiarization sessions required to obtain an accurate measure of reliability associated with force variables recorded during unloaded and loaded (30 and 60% of 1 repetition maximum squat [1RM]) static vertical jumps (SJ). Nine physically active men attended 4 separate testing sessions over a 2-week period. Force platform recordings of peak force, peak rate of force development (pRFD), average rate of force development, takeoff velocity, average power, and peak power were obtained for each jump. During each of the 4 testing sessions, 3 jumps were performed under each of the load conditions. The average of the force variables were used in the analysis. Familiarization was assessed using the scores obtained during the 4 separate testing sessions. Reliability was assessed by calculating intraclass correlation coefficients (ICCs) and coefficient of variation (CV) associated with the force variables. No significant differences (p > 0.05) were obtained between the testing sessions for any of the force variables. With the exception of pRFD, the force variables showed reasonably good levels of test-retest reliability (ICC range: 0.75-0.99; CV range: 1.2-7.6%). High levels of reliability can be achieved in a variety of force variables without the need for familiarization sessions when performing SJ under unloaded conditions and with loads of 30 and 60% of 1RM squat with physically active men.     

Test-retest reliability of knee biomechanics during stop jump landings

Studies that seek to determine the effects of an intervention on knee biomechanics during landing from a jump implicitly assume that the variables of interest are reliable both within and between data collection sessions. Currently, such reliability data are not available for a stop jump. Standard three-dimensional motion analysis was used to determine sagittal and frontal plane peak angles and moments and peak vertical ground reaction force within and between sessions for a stop jump. Twelve female recreational athletes participated in two data collection sessions spaced two weeks apart. Interclass correlation coefficients and coefficient of multiple correlation were used to determine within and between session reliability of peak knee flexion angle, peak internal knee extension moment, peak knee abduction angle, peak internal knee adduction moment and peak vertical ground reaction force. Overall reliability within a session (ICC (3,1) 0.631-0.881; CMC 0.672-0.958) and between sessions (ICC (3,k) 0.685-0.959; CMC 0.598-0.944) was good. Peak angles and moments were similar between sessions. The stop jump is less reliable within a session than a drop vertical jump reported previously in the literature. This is likely due to increased intrasubject variability between trials due to the less constrained nature of the task. Reliability of the stop jump is comparable to the drop vertical jump between sessions. Reliability of knee adduction moment is lower than reported for the drop vertical jump. The results of this study support the use of a stop jump task to evaluate knee biomechanics during landing in longitudinal studies with a repeated measures design.     

Effects of electromyostimulation training and volleyball practice on jumping ability

The aim of this study was to investigate the influence of a 4-week electromyostimulation (EMS) training program on the vertical jump performance of 12 volleyball players. EMS sessions were incorporated into volleyball sessions 3 times weekly. EMS consisted of 20-22 concomitant stimulations of the knee extensor and plantar flexor muscles and lasted approximately 12 minutes. No significant changes were observed after EMS training for squat jump (SJ) and counter movement jump (CMJ) performance, while the mean height and the mean power maintained during 15 seconds of consecutive CMJs significantly increased by approximately 4% (p < 0.05). Ten days after the end of EMS training, the jumping height significantly (p < 0.05) increased compared with baseline also for single jumps (SJ +6.5%, CMJ +5.4%). When the aim of EMS resistance training is to enhance vertical jump ability, sport-specific workouts following EMS would enable the central nervous system to optimize the control to neuromuscular properties.     

The relationship between vertical jump power estimates and weightlifting ability: a field-test approach

The purpose of this study was to assess the usefulness of the vertical jump and estimated vertical-jump power as a field test for weightlifting. Estimated PP output from the vertical jump was correlated with lifting ability among 64 USA national-level weightlifters (junior and senior men and women). Vertical jump was measured using the Kinematic Measurement System, consisting of a switch mat interfaced with a laptop computer. Vertical jumps were measured using a hands-on-hips method. A counter-movement vertical jump (CMJ) and a static vertical jump (SJ, 90 degrees knee angle) were measured. Two trials were given for each condition. Test-retest reliability for jump height was intra-class correlation (ICC) = 0.98 (CMJ) and ICC = 0.96 (SJ). Athletes warmed up on their own for 2-3 minutes, followed by 2 practice jumps at each condition. Peak power (PP) was estimated using the equations developed by Sayers et al. (24). The athletes' current lifting capabilities were assessed by a questionnaire, and USA national coaches checked the listed values. Differences between groups (i.e., men versus women, juniors versus resident lifters) were determined using t-tests (p < or = 0.05). Correlations were determined using Pearson's r. Results indicate that vertical jumping PP is strongly associated with weightlifting ability. Thus, these results indicate that PP derived from the vertical jump (CMJ or SJ) can be a valuable tool in assessing weightlifting performance.     

Reliability and factorial validity of squat and countermovement jump tests

The primary aim of this study was to determine reliability and factorial validity of squat (SJ) and countermovement jump (CMJ) tests. The secondary aim was to compare 3 popular methods for the estimation of vertical jumping height. Physical education students (n = 93) performed 7 explosive power tests: 5 different vertical jumps (Sargent jump, Abalakow's jump with arm swing and without arm swing, SJ, and CMJ) and 2 horizontal jumps (standing long jump and standing triple jump). The greatest reliability among all jumping tests (Cronbach's alpha = 0.97 and 0.98) had SJ and CMJ. The reliability alpha coefficients for other jumps were also high and varied between 0.93 and 0.96. Within-subject variation (CV) in jumping tests ranged between 2.4 and 4.6%, the values being lowest in both horizontal jumps and CMJ. Factor analysis resulted in the extraction of only 1 significant principal component, which explained 66.43% of the variance of all 7 jumping tests. Since all jumping tests had high correlation coefficients with the principal component (r = 0.76-0.87), it was interpreted as the explosive power factor. The CMJ test showed the highest relationship with the explosive power factor (r = 0.87), that is, the greatest factorial validity. Other jumping tests had lower but relatively homogeneous correlation with the explosive power factor extracted. Based on the results of this study, it can be concluded that CMJ and SJ, measured by means of contact mat and digital timer, are the most reliable and valid field tests for the estimation of explosive power of the lower limbs in physically active men.     

Countermovement vertical jump with drop step is higher than without in collegiate football players

The vertical jump is a performance test commonly used to assess explosive power and predict athletic ability. Typically, the vertical jump is performed with a countermovement from a stationary stance. We hypothesized that taking a quick step back before initiating the jump, known as the drop-step technique, would result in a higher vertical jump. The purpose of this study was to compare countermovement vertical jumps (CMJs) done from the stationary-stance position to CMJs performed with the drop-step with trained athletes. NCAA Division I football players (N = 56) performed 3 trials each of stationary-stance and drop-step CMJs in a random order. A paired t test revealed that a significantly (p < 0.01) higher jump height was achieved with the drop-step CMJ (69.3 +/- 8.0 cm) compared to the stationary-stance CMJ (66.5 +/- 8.0 cm). The 2 jump conditions were highly related (r = 0.95), and the rank order of the athletes tended to be similar from 1 condition to the other (rho = 0.94). Trial-to-trial reliability was similar for each condition (coefficient of variation [CV] = 3.5% stationary stance; CV = 4.1% drop step). It is important to standardize CMJ testing procedures because a significant difference in the height achieved exists between the stationary-stance and drop-step techniques.     

Low and moderate plyometric training frequency produces greater jumping and sprinting gains compared with high frequency

The purpose of this study was to examine the effect of 3 different plyometric training frequencies (e.g., 1 day per week, 2 days per week, 4 days per week) associated with 3 different plyometric training volumes on maximal strength, vertical jump performance, and sprinting ability. Forty-two students were randomly assigned to 1 of 4 groups: control (n = 10, 7 sessions of drop jump (DJ) training, 1 day per week, 420 DJs), 14 sessions of DJ training (n = 12, 2 days per week, 840 DJs), and 28 sessions of DJ training (n = 9, 4 days per week, 1680 DJs). The training protocols included DJ from 3 different heights 20, 40, and 60 cm. Maximal strength (1 repetition maximum [1RM] and maximal isometric strength), vertical height in countermovement jumps and DJs, and 20-m sprint time tests were carried out before and after 7 weeks of plyometric training. No significant differences were observed among the groups in pre-training in any of the variables tested. No significant changes were observed in the control group in any of the variables tested at any point. Short-term plyometric training using moderate training frequency and volume of jumps (2 days per week, 840 jumps) produces similar enhancements in jumping performance, but greater training efficiency (approximately 12% and 0.014% per jump) compared with high jumping (4 days per week, 1680 jumps) training frequency (approximately 18% and 0.011% per jump). In addition, similar enhancements in 20-m-sprint time, jumping contact times and maximal strength were observed in both a moderate and low number of training sessions per week compared with high training frequencies, despite the fact that the average number of jumps accomplished in 7S (420 jumps) and 14S (840 jumps) was 25 and 50% of that performed in 28S (1680 jumps). These observations may have considerable practical relevance for the optimal design of plyometric training programs for athletes, given that a moderate volume is more efficient than a higher plyometric training volume.     

The acute effects of a warm-up including static or dynamic stretching on countermovement jump height, reaction time, and flexibility

The purpose of this research was to compare the effects of a warm-up with static vs. dynamic stretching on countermovement jump (CMJ) height, reaction time, and low-back and hamstring flexibility and to determine whether any observed performance deficits would persist throughout a series of CMJs. Twenty-one recreationally active men (24.4 ± 4.5 years) completed 3 data collection sessions. Each session included a 5-minute treadmill jog followed by 1 of the stretch treatments: no stretching (NS), static stretching (SS), or dynamic stretching (DS). After the jog and stretch treatment, the participant performed a sit-and-reach test. Next, the participant completed a series of 10 maximal-effort CMJs, during which he was asked to jump as quickly as possible after seeing a visual stimulus (light). The CMJ height and reaction time were determined from measured ground reaction forces. A treatment × jump repeated-measures analysis of variance for CMJ height revealed a significant main effect of treatment (p = 0.004). The CMJ height was greater for DS (43.0 cm) than for NS (41.4 cm) and SS (41.9 cm) and was not less for SS than for NS. Analysis also revealed a significant main effect of jump (p = 0.005) on CMJ height: Jump height decreased from the early to the late jumps. The analysis of reaction time showed no significant effect of treatment. Treatment had a main effect (p < 0.001) on flexibility, however. Flexibility was greater after both SS and DS compared to after NS, with no difference in flexibility between SS and DS. Athletes in sports requiring lower-extremity power should use DS techniques in warm-up to enhance flexibility while improving performance.     

The reliability of jump kinematics and kinetics in children of different maturity status

The purpose of this study was to determine the reliability of eccentric (ECC) and concentric (CON) kinematic and kinetic variables thought to be critical to jump performance during bilateral vertical countermovement jump (VCMJ) and horizontal countermovement jump (HCMJ) across children of different maturity status. Forty-two athletic male and female participants between 9 and 16 years of age were divided into 3 maturity groups according to peak height velocity (PHV) offset (Post-PHV, At-PHV, and Pre-PHV) and percent of predicted adult stature. All the participants performed 3 VCMJ and HCMJ trials and the kinematics, and kinetics of these jumps were measured via a force plate over 3 testing sessions. In both jumps, vertical CON mean and peak power and jump height or distance were the most reliable measures across all groups (change in the mean [CM] = -5.4 to 6.2%; coefficient of variation [CV] = 2.1-9.4%; Intraclass correlation coefficient [ICC] = 0.82-0.98), whereas vertical ECC mean power was the only ECC variable with acceptable reliability for both jumps (CM = -0.7 to 10.1%; CV = 5.2-15.6%; ICC = 0.74-0.97). A less mature state was "likely" to "very likely" to reduce the reliability of the HCMJ ECC kinetics and kinematics. These findings suggested that movement variability is associated with the ECC phase of CMJs, especially in Pre-PHV during the HCMJ. Vertical CON mean and peak power and ECC mean power were deemed reliable and appropriate to be used in children as indicators of jump and stretch-shortening cycle performance.     

Predicting lower body power from vertical jump prediction equations for loaded jump squats at different intensities in men and women

The purpose of this study was to determine the efficacy of estimating peak lower body power from a maximal jump squat using 3 different vertical jump prediction equations. Sixty physically active college students (30 men, 30 women) performed jump squats with a weighted bar's applied load of 20, 40, and 60% of body mass across the shoulders. Each jump squat was simultaneously monitored using a force plate and a contact mat. Peak power (PP) was calculated using vertical ground reaction force from the force plate data. Commonly used equations requiring body mass and vertical jump height to estimate PP were applied such that the system mass (mass of body + applied load) was substituted for body mass. Jump height was determined from flight time as measured with a contact mat during a maximal jump squat. Estimations of PP (PP(est)) for each load and for each prediction equation were compared with criterion PP values from a force plate (PP(FP)). The PP(est) values had high test-retest reliability and were strongly correlated to PP(FP) in both men and women at all relative loads. However, only the Harman equation accurately predicted PP(FP) at all relative loads. It can therefore be concluded that the Harman equation may be used to estimate PP of a loaded jump squat knowing the system mass and peak jump height when more precise (and expensive) measurement equipment is unavailable. Further, high reliability and correlation with criterion values suggest that serial assessment of power production across training periods could be used for relative assessment of change by either of the prediction equations used in this study.     

Surface electromyographic assessment of the effect of static stretching of the gastrocnemius on vertical jump performance

The purpose of this study was to investigate the effects of static stretching of the gastrocnemius muscle on maximal vertical jump performance using electromyographic activity (EMG) of the gastrocnemius musculature to record muscle activation during vertical jump performance. Fourteen healthy adults (8 men and 6 women) aged 18-34 years, who were familiar with the vertical jumping task and had no lower extremity injuries or any bone or joint disorders within the past year, served as participants for this study. After a brief warm-up, participants performed the following sequence: (a) three baseline maximal vertical jump trials, (b) 15 minutes of quiet sitting and three 30-second bilateral static stretches of the gastrocnemius muscles, and (c) 3 maximal vertical jump trials. Jump height data were collected using the Kistler force plate, while muscle activity was recorded during the jumping and stretching trials using a Noraxon telemetry EMG unit. Vertical jump height data as well as EMG values were averaged for the 3 trials and analyzed using paired t-tests for pre- and poststretching (alpha = 0.05). Vertical jump height was 5.6% lower when poststretch heights were compared with prestretch heights (t = -4.930, p < 0.005). Gastrocnemius EMG was 17.9% greater when the EMG during poststretch jumps was compared with prestretch jumps (t = 2.805, p < 0.02). The results from this study imply that, despite increased gastrocnemius muscle activity, static stretching of the gastrocnemius muscles had a negative effect on maximal jumping performance. The practical importance concerns coaches and athletes, who may want to consider the potential adverse effects of performing static stretching of the gastrocnemius muscles only before a jumping event, as jump height may be negatively affected. Future research is required to identify the mechanisms that affect vertical jump performance.     

High-density electromyographic assessment of stretch reflex activity during drop jumps from varying drop heights

This study investigated how drop heights and their associated drop jump performance relate to stretch reflex modulations. Eleven male subjects performed ten drop jumps from each of three individually predetermined drop heights. These were the drop height resulting in maximal performance (OPT), as well as 10 cm below (LOW) and above (HIGH) maximal performance. To quantify drop jump performance the reactive strength index, derived from force plate measures, was used. High-density surface EMG provided both stretch reflex response timing and size, as well as novel insight into the associated motor unit recruitment via muscle fiber conduction velocity estimations. These measures were examined in the vastus lateralis (VL), soleus (SOL) and gastrocnemius medialis (GM).Drop jump performance improved by 9% (p < 0.001) from LOW to OPT and decreased by 5% (p = 0.008) from OPT to HIGH. Despite decreasing performance, stretch reflex responses were largest at HIGH. Stretch reflex responses timing did not change; staying within the short (SOL, <60 ms) and medium (VL, GM; 60–85 ms) latency response time-frames. Motor unit recruitment appeared to change across drop heights only for VL, whereas activation intensity only changed for SOL. These results indicate that during drop jumps above OPT neuromuscular modifications result in VL no longer being maximally recruited.     

The effect of drop jump starting height and contact time on power, work performed, and moment of force

The purposes of this study are (a) to examine the effects of contact time manipulation on jump parameters and (b) to examine the interaction between starting height changes and contact time changes on important jump parameters. Fifteen male athletes performed a series of drop jumps from heights of 20, 40, and 60 cm. The instructions given to the subjects were (a) "jump as high as you can" and (b) "jump high a little faster than your previous jump." Jumps were performed at each height until the athlete could not achieve a shorter ground contact time. The data were divided into 5 groups where group 1 was made up of the longest ground contact times of each athlete and groups 2-4 were composed of progressively shorter contact times, with group 5 having the shortest contact times. The jumps of group 3 produced the highest maximum and mean mechanical power (p <0.05) during the positive phase of the drop jumps regardless of starting jump height. The vertical takeoff velocities for the first 3 groups did not show significant (p < 0.05) differences. These results indicate that the manipulation of jump technique plays larger role than jump height in the manipulation of important jump parameters.     

Relationship between reactive strength variables in horizontal and vertical drop jumps

The aim of this study was to investigate the relationship between reactive strength in a vertical and a horizontal drop jump (DJ). Subjects (n = 28) with previous jump training experience, performed 6 vertical DJs and 6 horizontal DJs from a 0.4-m box. Contact time, height jumped, distance jumped, and reactive strength index (RSI) were calculated and analyzed. Typical error measurements (TEMCV%) and intraclass correlations (ICCs) were used to assess the intrasubject reliability. Relationships between jumps and within jumps of the aforementioned variables were assessed using ICCs. The ICC (r > 0.789) and the TEMCV% (<10%) indicated good reliability for both vertical and horizontal DJs across each variable. Contact time showed no relationship between jumps (r = 0.222) and had no effect on the vertical DJ height (r = 0.152) or horizontal DJ distance (r = 0.261). The RSI correlation (r = 0.533) indicated a large relationship between reactive ability in the horizontal DJ and the vertical DJ. Contact times were significantly lower in vertical DJs compared with horizontal DJs (p < 0.0001). This study indicated that horizontal DJs are reliable and may be better used to train reactive movements that do not require brief contact times.