Photogrammetry: a useful tool for three‐dimensional morphometric analysis of small mammals

Recently, the improvement of methods for shape analysis has revolutionized the field of morphometrics. While three‐dimensional (3D) imaging technology is increasingly available, many studies of 3D structures still use two‐dimensional (2D) data, even when this may result in the loss of important information. This is particularly conspicuous in the study of small mammals, as devices precise enough for 3D digitization of small objects are the most expensive. Thus, the development of low‐cost methods aimed to recover 3D shape from small mammals would be of wide interest. Photogrammetry allows for obtaining 3D data with a lower cost than other 3D techniques, but it has not been previously applied to the study of small mammals. Accordingly, here we test the suitability of photogrammetric techniques to obtain 3D landmarks on mouse skulls as a model for small mammals. Shape and size of 3D models obtained with photogrammetric techniques were consistent among replicates, even when different sets of photographs were used. The linear measurements obtained from 3D models produced here were highly correlated with measurements obtained with callipers on actual crania, and differences among both sets of measures were smaller than those among individuals in most of the tested measures. These results show for the first time that photogrammetry is a precise technique for 3D shape analysis of small mammals. Photogrammetry also proved to be accurate for obtaining linear measurements between 3D landmarks; however, further studies are needed to demonstrate that this technique is also accurate to recreate 3D shapes.     

Tissue‐specific inactivation by cytosine deaminase/uracil phosphoribosyl transferase as a tool to study plant biology

Recent advances in the study of plant developmental and physiological responses have benefited from tissue‐specific approaches, revealing the role of some cell types in these processes. Such approaches have relied on the inactivation of target cells using either toxic compounds or deleterious genes; however, both tissue‐specific and truly inducible tools are lacking in order to precisely target a developmental window or specific growth response. We engineered the yeast fluorocytosine deaminase (FCY1) gene by creating a fusion with the bacterial uracil phosphoribosyl transferase (UPP) gene. The recombinant protein converts the precursor 5‐fluorocytosine (5‐FC) into 5‐fluorouracyl, a drug used in the treatment of a range of cancers, which triggers DNA and RNA damage. We expressed the FCY‐UPP gene construct in specific cell types using enhancer trap lines and promoters, demonstrating that this marker acts in a cell‐autonomous manner. We also showed that it can inactivate slow developmental processes like lateral root formation by targeting pericycle cells. It also revealed a role for the lateral root cap and the epidermis in controlling root growth, a faster response. The 5‐FC precursor acts systemically, as demonstrated by its ability to inhibit stomatal movements when supplied to the roots in combination with a guard cell‐specific promoter. Finally, we demonstrate that the tissular inactivation is reversible, and can therefore be used to synchronize plant responses or to determine cell type‐specific functions during different developmental stages. This tool will greatly enhance our capacity to understand the respective role of each cell type in plant physiology and development.     

Multiple aspects of the selfing syndrome of the morning glory Ipomoea lacunosa evolved in response to selection: A Qst‐Fst comparison

The frequent transition from outcrossing to selfing in flowering plants is often accompanied by changes in multiple aspects of floral morphology, termed the “selfing syndrome.” While the repeated evolution of these changes suggests a role for natural selection, genetic drift may also be responsible. To determine whether selection or drift shaped different aspects of the pollination syndrome and mating system in the highly selfing morning glory Ipomoea lacunosa, we performed multivariate and univariate Qst‐Fst comparisons using a wide sample of populations of I. lacunosa and its mixed‐mating sister species Ipomoea cordatotriloba. The two species differ in early growth, floral display, inflorescence traits, corolla size, nectar, and pollen number. Our analyses support a role for natural selection driving trait divergence, specifically in corolla size and nectar traits, but not in early growth, display size, inflorescence length, or pollen traits. We also find evidence of selection for reduced herkogamy in I. lacunosa, consistent with selection driving both the transition in mating system and the correlated floral changes. Our research demonstrates that while some aspects of the selfing syndrome evolved in response to selection, others likely evolved due to drift or correlated selection, and the balance between these forces may vary across selfing species.     

Matrix‐assisted laser desorption/ionization mass spectrometry imaging: a powerful tool for probing the molecular topology of plant cutin polymer

The cutin polymers of different fruit cuticles (tomato, apple, nectarine) were examined using matrix‐assisted laser desorption/ionization mass spectrometry imaging (MALDI MSI) after in situ release of the lipid monomers by alkaline hydrolysis. The mass spectra were acquired from each coordinate with a lateral spatial resolution of approximately 100 μm. Specific monomers were released at their original location in the tissue, suggesting that post‐hydrolysis diffusion can be neglected. Relative quantification of the species was achieved by introducing an internal standard, and the collection of data was subjected to non‐supervised and supervised statistical treatments. The molecular images obtained showed a specific distribution of ions that could unambiguously be ascribed to cutinized and suberized regions observed at the surface of fruit cuticles, thus demonstrating that the method is able to probe some structural changes that affect hydrophobic cuticle polymers. Subsequent chemical assignment of the differentiating ions was performed, and all of these ions could be matched to cutin and suberin molecular markers. Therefore, this MALDI‐MSI procedure provides a powerful tool for probing the surface heterogeneity of plant lipid polymers. This method should facilitate rapid investigation of the relationships between cuticle phenotypes and the structure of cutin within a large population of mutants.     

Identification of a recently active Prunus‐specific non‐autonomous Mutator element with considerable genome shaping force

Miniature inverted‐repeat transposable elements (MITEs) are known to contribute to the evolution of plants, but only limited information is available for MITEs in the Prunus genome. We identified a MITE that has been named Falling Stones, FaSt. All structural features (349‐bp size, 82‐bp terminal inverted repeats and 9‐bp target site duplications) are consistent with this MITE being a putative member of the Mutator transposase superfamily. FaSt showed a preferential accumulation in the short AT‐rich segments of the euchromatin region of the peach genome. DNA sequencing and pollination experiments have been performed to confirm that the nested insertion of FaSt into the S‐haplotype‐specific F‐box gene of apricot resulted in the breakdown of self‐incompatibility (SI). A bioinformatics‐based survey of the known Rosaceae and other genomes and a newly designed polymerase chain reaction (PCR) assay verified the Prunoideae‐specific occurrence of FaSt elements. Phylogenetic analysis suggested a recent activity of FaSt in the Prunus genome. The occurrence of a nested insertion in the apricot genome further supports the recent activity of FaSt in response to abiotic stress conditions. This study reports on a presumably active non‐autonomous Mutator element in Prunus that exhibits a major indirect genome shaping force through inducing loss‐of‐function mutation in the SI locus.     

Poplar and shrub willow energy crops in the United States: field trial results from the multiyear regional feedstock partnership and yield potential maps based on the PRISM‐ELM model

To increase the understanding of poplar and willow perennial woody crops and facilitate their deployment for the production of biofuels, bioproducts, and bioenergy, there is a need for broadscale yield maps. For national analysis of woody and herbaceous crops production potential, biomass feedstock yield maps should be developed using a common framework. This study developed willow and poplar potential yield maps by combining data from a network of willow and poplar field trials and the modeling power of PRISM‐ELM. Yields of the top three willow cultivars across 17 sites ranged from 3.60 to 14.6 Mg ha^?1 yr^?1 dry weight, while the yields from 17 poplar trials ranged from 7.5 to 15.2 Mg ha^?1 yr^?1. Relationships between the environmental suitability estimates from the PRISM‐ELM model and results from field trials had an R² of 0.60 for poplar and 0.81 for willow. The resulting potential yield maps reflected the range of poplar and willow yields that have been reported in the literature. Poplar covered a larger geographic range than willow, which likely reflects the poplar breeding efforts that have occurred for many more decades using genotypes from a broader range of environments than willow. While the field trial data sets used to develop these models represent the most complete information at the time, there is a need to expand and improve the model by monitoring trials over multiple cutting cycles and across a broader range of environmental gradients. Despite some limitations, the results of these models represent a dramatic improvement in projections of potential yield of poplar and willow crops across the United States.     

Sex‐biased oviposition by a nursery pollinator on a gynodioecious host plant: Implications for breeding system evolution and evolution of mutualism

Dioecy, a breeding system where individual plants are exclusively male or female, has evolved repeatedly. Extensive theory describes when dioecy should arise from hermaphroditism, frequently through gynodioecy, where females and hermaphrodites coexist, and when gynodioecy should be stable. Both pollinators and herbivores often prefer the pollen‐bearing sex, with sex‐specific fitness effects that can affect breeding system evolution. Nursery pollination, where adult insects pollinate flowers but their larvae feed on plant reproductive tissues, is a model for understanding mutualism evolution but could also yield insights into plant breeding system evolution. We studied a recently established nursery pollination interaction between native Hadena ectypa moths and introduced gynodioecious Silene vulgaris plants in North America to assess whether oviposition was biased toward females or hermaphrodites, which traits were associated with oviposition, and the effect of oviposition on host plant fitness. Oviposition was hermaphrodite‐biased and associated with deeper flowers and more stems. Sexual dimorphism in flower depth, a trait also associated with oviposition on the native host plant (Silene stellata), explained the hermaphrodite bias. Egg‐receiving plants experienced more fruit predation than plants that received no eggs, but relatively few fruits were lost, and egg receipt did not significantly alter total fruit production at the plant level. Oviposition did not enhance pollination; egg‐receiving flowers usually failed to expand and produce seeds. Together, our results suggest that H. ectypa oviposition does not exert a large fitness cost on host plants, sex‐biased interactions can emerge from preferences developed on a hermaphroditic host species, and new nursery pollination interactions can arise as negative or neutral rather than as mutualistic for the plant.     

Engineering heat tolerance in potato by temperature‐dependent expression of a specific allele of HEAT‐SHOCK COGNATE 70

For many commercial potato cultivars, tuber yield is optimal at average daytime temperatures in the range of 14–22 °C. Further rises in ambient temperature can reduce or completely inhibit potato tuber production, with damaging consequences for both producer and consumer. The aim of this study was to use a genetic screen based on a model tuberization assay to identify quantitative trait loci (QTL) associated with enhanced tuber yield. A candidate gene encoding HSc70 was identified within one of the three QTL intervals associated with elevated yield in a Phureja–Tuberosum hybrid diploid potato population (06H1). A particular HSc70 allelic variant was linked to elevated yield in the 06H1 progeny. Expression of this allelic variant was much higher than other alleles, particularly on exposure to moderately elevated temperature. Transient expression of this allele in Nicotiana benthamiana resulted in significantly enhanced tolerance to elevated temperature. An TA repeat element was present in the promoter of this allele, but not in other HSc70 alleles identified in the population. Expression of the HSc70 allelic variant under its native promoter in the potato cultivar Desiree resulted in enhanced HSc70 expression at elevated temperature. This was reflected in greater tolerance to heat stress as determined by improved yield under moderately elevated temperature in a model nodal cutting tuberization system and in plants grown from stem cuttings. Our results identify HSc70 expression level as a significant factor influencing yield stability under moderately elevated temperature and identify specific allelic variants of HSc70 for the induction of thermotolerance via conventional introgression or molecular breeding approaches.