Targeted genome editing in pluripotent stem cells using zinc-finger nucleases

Zinc-finger nucleases (ZFNs) are designer nucleases capable of cleaving a prespecified target DNA within complex genomes. ZFNs consist of a non-specific endonuclease domain fused to an engineered DNA-binding domain that tethers the nuclease activity to the chosen chromosomal site. The endonuclease-induced DNA double strand break triggers a cellular DNA damage response, resulting in double strand break repair by either accurate homologous recombination (HR) or error-prone non-homologous end-joining (NHEJ). Thus, ZFNs are powerful tools for targeted genome engineering in a variety of mammalian cell types, including embryonic (ESCs) and induced pluripotent stem cells (iPSCs). As a paradigm for genome editing in pluripotent stem cells, we describe the use of ZFNs in murine ESCs for generating knockout alleles by NHEJ without selection or by HR employing different selection schemes.     

Generation of a triple‐gene knockout mammalian cell line using engineered zinc‐finger nucleases

Mammalian cells with multi‐gene knockouts could be of considerable utility in research, drug discovery, and cell‐based therapeutics. However, existing methods for targeted gene deletion require sequential rounds of homologous recombination and drug selection to isolate rare desired events—a process sufficiently laborious to limit application to individual loci. Here we present a solution to this problem. Firstly, we report the development of zinc‐finger nucleases (ZFNs) targeted to cleave three independent genes with known null phenotypes. Mammalian cells exposed to each ZFN pair in turn resulted in the generation of cell lines harboring single, double, and triple gene knockouts, that is, the successful disruption of two, four, and six alleles. All three biallelic knockout events were obtained at frequencies of >1% without the use of selection, displayed the expected knockout phenotype(s), and harbored DNA mutations centered at the ZFN binding sites. These data demonstrate the utility of ZFNs in multi‐locus genome engineering. Biotechnol. Bioeng. 2010; 106: 97–105. © 2009 Wiley Periodicals, Inc.     

Genome engineering: unconventional biochemistry and food security

Unprecedented technological advances in biology provide the tools to enhance plant productivity to meet world hunger. The genome sequences of thousands of organisms and their analyses is the blue print of their genome architecture which can now be further improved. New Nucleases offer the opportunity of modifying plant genomes in a way that was not possible only a while ago. Synthetic DNA and methodology of gene assembly further expand Synthetic biology and allow construction of metabolic pathways to produce valuable molecules in Novel hosts. The knowledge of Quorum Sensing (QS), could add to the successful use of biocontrol agents. The technology has no limitations, and excitements in biology will be exploited to meet future energy needs.     

Targeted genome engineering via zinc finger nucleases

With the development of next-generation sequencing technology, ever-expanding databases of genetic information from various organisms are available to researchers. However, our ability to study the biological meaning of genetic information and to apply our genetic knowledge to produce genetically modified crops and animals is limited, largely due to the lack of molecular tools to manipulate genomes. Recently, targeted cleavage of the genome using engineered DNA scissors called zinc finger nucleases (ZFNs) has successfully supported the precise manipulation of genetic information in various cells, animals, and plants. In this review, we will discuss the development and applications of ZFN technology for genome engineering and highlight recent reports on its use in plants.     

A toolbox and procedural notes for characterizing novel zinc finger nucleases for genome editing in plant cells

The induction of double-strand breaks (DSBs) in plant genomes can lead to increased homologous recombination or site-specific mutagenesis at the repair site. This phenomenon has the potential for use in gene targeting applications in plant cells upon the induction of site-specific genomic DSBs using zinc finger nucleases (ZFNs). Zinc finger nucleases are artificial restriction enzymes, custom-designed to cleave a specific DNA sequence. The tools and methods for ZFN assembly and validation could potentially boost their application for plant gene targeting. Here we report on the design of biochemical and in planta methods for the analysis of newly designed ZFNs. Cloning begins with de novo assembly of the DNA-binding regions of new ZFNs from overlapping oligonucleotides containing modified helices responsible for DNA-triplet recognition, and the fusion of the DNA-binding domain with a Fok I endonuclease domain in a dedicated plant expression cassette. Following the transfer of fully assembled ZFNs into Escherichia coli expression vectors, bacterial lysates were found to be most suitable for in vitro digestion analysis of palindromic target sequences. A set of three in planta activity assays was also developed to confirm the nucleic acid digestion activity of ZFNs in plant cells. The assays are based on the reconstruction of GUS expression following transient or stable delivery of a mutated uidA and ZFN-expressing cassettes into target plants cells. Our tools and assays offer cloning flexibility and simple assembly of tested ZFNs and their corresponding target sites into Agrobacterium tumefaciens binary plasmids, allowing efficient implementation of ZFN-validation assays in planta .     

快速构建CRISPR/Cas9基因组靶向编辑系统

CRISPR/Cas9核酸酶作为一种新的基因组靶向编辑技术,已成功应用于多种动植物基因组修饰研究. CRISPR/Cas9作用后的阳性细胞筛选和富集是该技术的关键之一. 本研究以鸡EAV-HP（endogenous avian retrovirus-HP）基因和MSTN（myostatin）基因为例,从靶位点的选择、表达载体构建、双基因报告载体构建和核酸酶活性验证4个方面,系统研究了CRISPR/Cas9核酸酶技术平台. 结果表明,利用寡聚核苷酸直接退火方法,构建表达载体和报告载体的阳性率分别高达100%和89.5%. 报告载体的PuroR（puromycin resistant gene）和eGFP（enhanced green fluorescent protein）基因的成功表达表明,构建的CRISPR/Cas9系统能有效切割靶序列,并用于后续阳性克隆的筛选和富集. 本方法摒弃了传统分子克隆的PCR扩增和酶切处理目标基因的方法,而是利用寡聚核苷酸直接退火获得含有黏性末端的目标DNA,简化了载体构建过程,低成本且快速获得CRISPR/Cas9基因组靶向编辑系统.     

Progress of targeted genome modification approaches in higher plants

Transgene integration in plants is based on illegitimate recombination between non-homologous sequences. The low control of integration site and number of (trans/cis)gene copies might have negative consequences on the expression of transferred genes and their insertion within endogenous coding sequences. The first experiments conducted to use precise homologous recombination for gene integration commenced soon after the first demonstration that transgenic plants could be produced. Modern transgene targeting categories used in plant biology are: (a) homologous recombination-dependent gene targeting; (b) recombinase-mediated site-specific gene integration; (c) oligonucleotide-directed mutagenesis; (d) nuclease-mediated site-specific genome modifications. New tools enable precise gene replacement or stacking with exogenous sequences and targeted mutagenesis of endogeneous sequences. The possibility to engineer chimeric designer nucleases, which are able to target virtually any genomic site, and use them for inducing double-strand breaks in host DNA create new opportunities for both applied plant breeding and functional genomics. CRISPR is the most recent technology available for precise genome editing. Its rapid adoption in biological research is based on its inherent simplicity and efficacy. Its utilization, however, depends on available sequence information, especially for genome-wide analysis. We will review the approaches used for genome modification, specifically those for affecting gene integration and modification in higher plants. For each approach, the advantages and limitations will be noted. We also will speculate on how their actual commercial development and implementation in plant breeding will be affected by governmental regulations.     

High-frequency homologous recombination in plants mediated by zinc-finger nucleases

Homologous recombination offers great promise for plant genome engineering. This promise has not been realized, however, because when DNA enters plant cells homologous recombination occurs infrequently and random integration predominates. Using a tobacco test system, we demonstrate that chromosome breaks created by zinc-finger nucleases greatly enhance the frequency of localized recombination. Homologous recombination was measured by restoring function to a defective GUS:NPTII reporter gene integrated at various chromosomal sites in 10 different transgenic tobacco lines. The reporter gene carried a recognition site for a zinc-finger nuclease, and protoplasts from each tobacco line were electroporated with both DNA encoding the nuclease and donor DNA to effect repair of the reporter. Homologous recombination occurred in more than 10% of the transformed protoplasts regardless of the reporter's chromosomal position. Approximately 20% of the GUS:NPTII reporter genes were repaired solely by homologous recombination, whereas the remainder had associated DNA insertions or deletions consistent with repair by both homologous recombination and non-homologous end joining. The DNA-binding domain encoded by zinc-finger nucleases can be engineered to recognize a variety of chromosomal target sequences. This flexibility, coupled with the enhancement in homologous recombination conferred by double-strand breaks, suggests that plant genome engineering through homologous recombination can now be reliably accomplished using zinc-finger nucleases.     

Functional annotations in bacterial genomes based on small RNA signatures

One of the key challenges in computational genomics is annotating coding genes and identification of regulatory RNAs in complete genomes. An attempt is made in this study which uses the regulatory RNA locations and their conserved flanking genes identified within the genomic backbone of template genome to search for similar RNA locations in query genomes. The search is based on recently reported coexistence of small RNAs and their conserved flanking genes in related genomes. Based on our study, 54 additional sRNA locations and functions of 96 uncharacterized genes are predicted in two draft genomes viz., Serratia marcesens Db1 and Yersinia enterocolitica 8081. Although most of the identified additional small RNA regions and their corresponding flanking genes are homologous in nature, the proposed anchoring technique could successfully identify four non-homologous small RNA regions in Y. enterocolitica genome also. The KEGG Orthology (KO) based automated functional predictions confirms the predicted functions of 65 flanking genes having defined KO numbers, out of the total 96 predictions made by this method. This coexistence based method shows more sensitivity than controlled vocabularies in locating orthologous gene pairs even in the absence of defined Orthology numbers. All functional predictions made by this study in Y. enterocolitica 8081 were confirmed by the recently published complete genome sequence and annotations. This study also reports the possible regions of gene rearrangements in these two genomes and further characterization of such RNA regions could shed more light on their possible role in genome evolution.     

Efficient targeted mutagenesis of the chordate Ciona intestinalis genome with zinc-finger nucleases

Zinc‐finger nucleases (ZFNs) are engineered nucleases that induce DNA double‐strand breaks (DSBs) at target sequences. They have been used as tools for generating targeted mutations in the genomes of multiple organisms in both animals and plants. The DSB induced by ZFNs is repaired by non‐homologous end joining (NHEJ) or by homologous recombination (HR) mechanisms. Non‐homologous end joining induces some errors because it is independent of a reference DNA sequence. Through the NHEJ mechanism, ZFNs generate insertional or deletional mutations at the target sequence. We examined the usability, specificity and toxicity of ZFNs in the basal chordate Ciona intestinalis. As the target of ZFNs, we chose an enhanced green fluorescent protein (EGFP) gene artificially inserted in the C. intestinalis genome because this locus is neutral for the development and growth of C. intestinalis, and the efficiency of mutagenesis with ZFNs can thus be determined without any bias. We introduced EGFP ‐ZFN mRNAs into the embryos of an EGFP ‐transgenic line and observed the mutation frequency in the target site of EGFP . We also examined the effects of the EGFP ‐ZFNs at off‐target sites resembling the EGFP target sequence in the C. intestinalis genome in order to examine the specificity of ZFNs. We further investigated the influence of ZFNs on embryogenesis, and showed that adequate amounts of ZFNs, which do not disrupt embryogenesis, can efficiently induce mutations on the on‐target site with less effect on the off‐target sites. This suggests that target mutagenesis with ZFNs will be a powerful technique in C. intestinalis.