Sites and gene products involved in lambdoid phage DNA packaging.

21 is a temperate lambdoid coliphage, and the genes that encode the head proteins of lambda and 21 are descended from a common ancestral bacteriophage. The sequencing of terminase genes 1 and 2 of 21 was completed, along with that of a segment at the right end of 21 DNA that includes the R4 sequence. The R4 sequence, a site that is likely involved in termination of DNA packaging, was found to be very similar to the R4 sequences of lambda and phi 80, suggesting that R4 is a recognition site that is not phage specific. DNA packaging by 21 is dependent on a host protein, integration host factor. A series of mutations in gene 1 (her mutations), which allow integration host factor-independent DNA packaging by 21, were found to be missense changes that affect predicted alpha-helixes in gp1. gp2, the large terminase subunit, is predicted to contain an ATP-binding domain and, perhaps, a second domain important for the cos-cutting activity of terminase. orf1, an open reading frame analogous in position to FI, a lambda gene involved in DNA packaging, shares some sequence identity with FI. orf1 was inactivated with nonsense and insertion mutations; these mutations were found not to affect phage growth. 21 was also not able to complement a lambda FI mutant.     

The bacteriophage lambda terminase. Partial purification and preliminary characterization of properties

The maturation of bacteriophage lambda DNA and its packaging into preformed heads to produce infectious phage is under the control of the two leftmost genes on the lambda chromosome, i.e., Nu1 and A. Based on its ability to complement lambda A- phage-infected cell extracts for packaging of lambda DNA in vitro, a single protein, designated terminase (ter) has been extensively purified using adsorption, ion exchange, and affinity column chromatography. The final preparation represents an approximately 60,000-fold purification over the activity found in crude extracts and is about 30 to 80% homogeneous as judged by visualizing the protein after electrophoresis in sodium dodecyl sulfate-polyacrylamide gel. In addition to packaging, terminase can also catalyze the endonucleolytic cleavage of lambda cohesive-end site DNA; both of these reactions require ATP. In some preparations, certain terminase fractions of extreme purity require protein factors present in extracts of uninfected Escherichia coli in order to catalyze the cohesive-end site cleavage reaction. On ion exchange columns purified terminase co-chromatographs with a DNA-dependent ATPase activity, hydrolyzing ATP to ADP and Pi in the presence of any of several types of DNA tested including those of non-lambda origin. The molecular weight of the native enzyme is 117,000 and appears to be a hetero-oligomer composed of 2 nonidentical subunits. The most likely composition of terminase is one gpA (gene product of A), Mr = 74,000 and two gpNu1, Mr = 21,000.     

Synthesis of a trans-Acting Inhibitor of DNA Maturation by Prohead Mutants of Phage λ

Bacteriophage lambda with mutations in genes that control prohead assembly and other head precursors cannot mature their DNA. In this paper we present evidence that the failure of these phage mutants to mature DNA is a reflection of a mechanism that modulates terminase nicking activity during normal phage development. We have constructed plasmids that contain the lambda-cohesive end site (cos) and the genes that code for DNA terminase, the enzyme that matures DNA by cutting at cos. The DNA terminase genes are under control of a thermosensitive cI repressor. These plasmids lack most of the genes involved in prohead morphogenesis and other head precursors. However, when repression is lifted by destruction of the thermosensitive repressor, the terminase synthesized is able to cut almost 100% of the plasmids. Therefore, these plasmids can mature in the absence of proheads and other head gene products. The plasmids are also able to complement mutants of lambda deficient in terminase and DNA maturation. However, in these complementation experiments, if the phage carry mutations in prohead genes E or B, not only is phage DNA maturation blocked, but the plasmid also fails to mature. These experiments show that, in the absence of proheads, phage lambda produces a trans-acting inhibitor of maturation. The genetic determinant of this inhibitor maps in a region extending from the middle of gene B to the end of gene C. A model is proposed in which the nicking activity of DNA-bound terminase is inhibited by the trans-acting inhibitor. Prohead (and other factors) binding to this complex would release the block to allow DNA cleavage and packaging.     

The large subunit of bacteriophage lambda's terminase plays a role in DNA translocation and packaging termination

The DNA packaging enzyme of bacteriophage lambda, terminase, is a heteromultimer composed of a small subunit, gpNu1, and a large subunit, gpA, products of the Nu1 and A genes, respectively. The role of terminase in the initial stages of packaging involving the site-specific binding and cutting of the DNA has been well characterized. While it is believed that terminase plays an active role in later post-cleavage stages of packaging, such as the translocation of DNA into the head shell, this has not been demonstrated. Accordingly, we undertook a generalized mutagenesis of lambda's A gene and found ten lethal mutations, nine of which cause post-cleavage packaging defects. All were located in the amino-terminal two-thirds of gpA, separate from the carboxy-terminal region where mutations affecting the protein's endonuclease activity have been found. The mutants fall into five groups according to their packaging phenotypes: (1) two mutants package part of the lambda chromosome, (2) one mutant packages the entire chromosome, but very slowly compared to wild-type, (3) two mutants do not package any DNA, (4) four mutants, though inviable, package the entire lambda chromosome, and (5) one mutant may be defective in both early and late stages of DNA packaging. These results indicate that gpA is actively involved in late stages of packaging, including DNA translocation, and that this enzyme contains separate functional domains for its early and late packaging activities.     

The terminase of bacteriophage lambda. Functional domains for cosB binding and multimer assembly

Terminase is a protein complex involved in lambda DNA packaging. The subunits of terminase, gpNul and gpA, are the products of genes Nul and A. The actions of terminase include DNA binding, prohead binding and DNA nicking. Phage 21 is a lambdoid phage that also makes a terminase, encoded by genes 1 and 2. The terminases of 21 and lambda are not interchangeable. This specificity involves two actions of terminase; DNA binding and prohead binding. In addition, the subunits of lambda terminase will not form functional multimers with the subunits of 21 terminase. lambda-21 hybrid phages can be produced as a result of recombination. We describe here lambda-21 hybrid phages that have hybrid terminase genes. The packaging specificities of the hybrids and the structure of their genes were compared in order to identify functional domains of terminase. The packaging specificities were determined in vivo by complementation tests and helper packaging experiments. Restriction enzyme site mapping and sequencing located the sites at which recombination occurred to produce the hybrid phages. lambda-21 hybrid 51 carries the lambda A gene, and a hybrid 1/Nul gene. The crossover that produced this phage occurred near the middle of the 1 and Nul genes. The amino-terminal portion of the hybrid protein is homologous to gp1 and the carboxy-terminal portion is homologous to gpNul. It binds to 21 DNA and forms functional multimers with gpA, providing evidence that the amino-terminal portion of gpNul is involved in DNA binding and the carboxy-terminal portion of gpNul is involved in the interaction with gpA. lambda-21 hybrid 54 has a hybrid 2/A gene. The amino terminus of the hybrid protein of lambda-21 hybrid 54 is homologous with gp2. This protein forms functional multimers only with gp1, providing evidence that the amino terminus of gpA is involved in the interaction with gpNul. These studies identify three functional domains of terminase.     

A functional domain of bacteriophage lambda terminase for prohead binding

Terminase is a multifunctional protein complex involved in DNA packaging during bacteriophage lambda assembly. Terminase is made of gpNul and gpA, the products of the phage lambda Nu1 and A genes. Early during DNA packaging terminase binds to lambda DNA to form a complex called complex I. Terminase is required for the binding of proheads by complex I to form a DNA: terminase: prohead complex known as complex II. Terminase remains associated with the DNA during encapsidation. The other known role for terminase in packaging is the production of staggered nicks in the DNA thereby generating the cohesive ends. Lambdoid phage 21 has cohesive ends identical to those of lambda. The head genes of lambda and 21 show partial sequence homology and are analogous in structure, function and position. The terminases of lambda and 21 are not interchangeable. At least two actions of terminase are involved in this specificity: (1) DNA binding; (2) prohead binding. The 1 and 2 genes at the left end of the 21 chromosome were identified as coding for the 21 terminase. gp1 and gp2 are analogous to gpNu1 and gpA, respectively. We have isolated a phage, lambda-21 hybrid 33, which is the product of a crossover between lambda and 21 within the terminase genes. Lambda-21 hybrid 33 DNA and terminase have phage 21 packaging specificity, as determined by complementation and helper packaging studies. The terminase of lambda-21 hybrid 33 requires lambda proheads for packaging. We have determined the position at which the crossover between lambda DNA and 21 DNA occurred to produce the hybrid phage. Lambda-21 hybrid 33 carries the phage 21 1 gene and a hybrid phage 2/A gene. Sequencing of lambda-21 hybrid 33 DNA shows that it encodes a protein that is homologous at the carboxy terminus with the 38 amino acids of the carboxy terminus of lambda gpA; the remainder of the protein is homologous to gp2. The results of these studies define a specificity domain for prohead binding at the carboxy terminus of gpA.     

Bacteriophage lambda terminase: alterations of the high-affinity ATPase affect viral DNA packaging

DNA packaging by large DNA viruses such as the tailed bacteriophages and the herpesviruses involves DNA translocation into a preformed protein shell, called the prohead. Translocation is driven by an ATP hydrolysis-powered DNA packaging motor. The bacteriophages encode a heterodimeric viral DNA packaging protein, called terminase. The terminases have an ATPase center located in the N terminus of the large subunit implicated in DNA translocation. In previous work with phage lambda, lethal mutations that changed ATP-reactive residues 46 and 84 of gpA, the large terminase subunit, were studied. These mutant enzymes retained the terminase endonuclease and helicase activities, but had severe defects in virion assembly, and lacked the terminase high-affinity ATPase activity. Surprisingly, in the work described here, we found that enzymes with the conservative gpA changes Y46F and Y46A had only mild packaging defects. These mild defects contrast with their profound virion assembly defects. Thus, these mutant enzymes have, in addition to the mild DNA packaging defects, a severe post-DNA packaging defect. In contrast, the gpA K84A enzyme had similar virion assembly and DNA packaging defects. The DNA packaging energy budget, i.e. DNA packaged/ATP hydrolyzed, was unchanged for the mutant enzymes, indicating that DNA translocation is tightly coupled to ATP hydrolysis. A model is proposed in which gpA residues 46 and 84 are important for terminase's high-affinity ATPase activity. Assembly of the translocation complex remodels this ATPase so that residues 46 and 84 are not crucial for the activated translocation ATPase. Changing gpA residues 46 and 84 primarily affects assembly, rather than the activity, of the translocation complex.     

Analysis of capsid portal protein and terminase functional domains: interaction sites required for DNA packaging in bacteriophage T4.

Bacteriophage DNA packaging results from an ATP-driven translocation of concatemeric DNA into the prohead by the phage terminase complexed with the portal vertex dodecamer of the prohead. Functional domains of the bacteriophage T4 terminase and portal gene 20 product (gp20) were determined by mutant analysis and sequence localization within the structural genes. Interaction regions of the portal vertex and large terminase subunit (gp17) were determined by genetic (terminase-portal intergenic suppressor mutations), biochemical (column retention of gp17 and inhibition of in vitro DNA packaging by gp20 peptides), and immunological (co-immunoprecipitation of polymerized gp20 peptide and gp17) studies. The specificity of the interaction was tested by means of a phage T4 HOC (highly antigenicoutercapsid protein) display system in which wild-type, cs20, and scrambled portal peptide sequences were displayed on the HOC protein of phage T4. Binding affinities of these recombinant phages as determined by the retention of these phages by a His-tag immobilized gp17 column, and by co-immunoprecipitation with purified terminase supported the specific nature of the portal protein and terminase interaction sites. In further support of specificity, a gp20 peptide corresponding to a portion of the identified site inhibited packaging whereas the scrambled sequence peptide did not block DNA packaging in vitro.The portal interaction site is localized to 28 residues in the central portion of the linear sequence of gp20 (524 residues). As judged by two pairs of intergenic portal-terminase suppressor mutations, two separate regions of the terminase large subunit gp17 (central and COOH-terminal) interact through hydrophobic contacts at the portal site. Although the terminase apparently interacts with this gp20 portal peptide, polyclonal antibody against the portal peptide appears unable to access it in the native structure, suggesting intimate association of gp20 and gp17 possibly internalizes terminase regions within the portal in the packasome complex. Both similarities and differences are seen in comparison to analogous sites which have been identified in phages T3 and lambda.     

Nucleotide sequence of the DNA packaging and capsid synthesis genes of bacteriophage P2.

Overlapping DNA fragments containing the DNA packaging and capsid synthesis gene region of bacteriophage P2 were cloned and sequenced. In this report we present the complete nucleotide sequence of this 6550 bp region. Each of six open reading frames found in the interval was assigned to one of the essential genes (Q, P, O, N, M and L) by correlating genetic, physical and mutational data with DNA and protein sequence information. Polypeptides predicted were: a capsid completion protein, gpL; the major capsid precursor, gpN; the presumed capsid scaffolding protein; gpO; the ATPase and proposed endonuclease subunits of terminase, gpP and gpM, respectively; and a candidate for the portal protein, gpQ. These gene and protein sequences exhibited no homology to analogous genes or proteins of other bacteriophages. Expression of gene Q in E. coli from a plasmid caused production of a Mr 39,000 Da protein that restored Qam34 growth. This sequence analysis found only genes previously known from analysis of conditional-lethal mutations. No new capsid genes were found.     

Structure of the bacteriophage lambda cohesive end site. Genetic analysis of the site (cosN) at which nicks are introduced by terminase.

A collection of mutations affecting the site (cosN) at which the bacteriophage lambda DNA packaging enzyme, terminase, introduces nicks to generate mature lambda chromosomes has been studied. A good correlation was found for mutational effects on burst size, accumulation of unused proheads, packaging of DNA into heads and cos cutting by terminase in vitro, indicating that defective cosN cleavage by terminase is the molecular explanation for the phenotypic effects of the mutations. Although the base-pairs of cosN display partial twofold rotational symmetry, cosN was found to be asymmetric functionally. Certain mutations to the left side of the center of rotational symmetry have more pronounced phenotypic effects than rotationally symmetric mutations to the right. The cosN11G mutation has no phenotypic effects when present as a single mutation, but does affect DNA packaging and cosN cutting in the presence of the symmetrically disposed cosN2C mutation. Mutations that decrease cosN cleavage result in the accumulation of unexpanded proheads, indicating that prohead expansion depends on cosN cutting.     

In vivo DNA cloning with a mini-Mu replicon cosmid and a helper lambda phage

A mini-Mu bacteriophage, containing the cohesive-end packaging site (cos) from a lambda-phi 80 hybrid phage, a high-copy-number plasmid replicon, and a kanamycin-resistance gene for independent selection, was constructed to clone genes in vivo. This mini-Mu element can be derepressed to transpose at a high frequency. DNA segments that become flanked by copies of this mini-Mu element in the same orientation can be packaged by a helper lambda phage. The resulting lambda lysate can be used to infect recipient cells where the injected DNA can circularize by annealing at the cos termini. Drug-resistant transductants obtained carry the mini-Mu-replicon cosmid element with inserts of different nucleotide sequences. These are analogous to recombinant DNA clones generated in vitro with restriction endonuclease cutting and ligase joining reactions replaced by the Mu transposition process. Clones of particular genes were isolated by their ability to complement specific mutations. Both recA+ and recA- recipient cells can be used with equal efficiency. Clones obtained with a helper lambda phage require the presence of the cos site in the mini-Mu replicon. They carry larger inserts than those isolated with the same mini-Mu element and Mu as a helper phage. The mini-Mu replicon-cosmid bacteriophage contains a lac-gene fusing segment for isolating fusions of lac operon DNA to gene control regions in the cloned sequences. Independent clones of a particular gene can be used to prepare a restriction map of the gene and its flanking regions.     

Essential interaction between lambdoid phage 21 terminase and the Escherichia coli integrative host factor

Lambdoid phage 21 requires the Escherichia coli integrative host factor (IHF) for growth. lambda-21 hybrids that have 21 DNA packaging specificity also require IHF. IHF-independent (her) mutants have been isolated. her mutations map in the amino-terminal half of the 21 1 gene. The 1 gene encodes the small subunit of the 21 terminase, and the amino-terminal half of the 1 polypeptide is a functional domain for specifically binding 21 DNA. Hence changes in the DNA-binding domain of terminase, her mutations, render 21 terminase able to function in the absence of IHF. Three of four her mutations studied are trans-dominant. An in vitro system was used to show that packaging of 21 DNA is IHF-dependent. IHF is directly required during the early, terminase-dependent steps of assembly. It is concluded that IHF is a host factor required for function of the 21 terminase. It is proposed, in analogy to the role of IHF in lambda integration, that IHF facilitates proper binding of 21 terminase to phage DNA. Consistent with this proposal, possible IHF-binding sites are present in the 21 cohesive end site.     

The Nu1 subunit of bacteriophage lambda terminase

The maturation and packaging of bacteriophage lambda DNA are catalyzed by the phage terminase enzyme. Terminase is composed of two protein subunits, gpNu1 and gpA. The holoenzyme is multifunctional in vitro; it binds to and cleaves lambda DNA at the cos site (where cos represents cohesive-end site), packages DNA into lambda proheads, and is also a DNA-dependent ATPase. The genes of the two subunits have been cloned separately into powerful expression vectors which allow for very high levels of protein overproduction. The gpNu1 protein has been purified to homogeneity and has a monomeric molecular weight of 21,200, in close agreement with the Mr of 20,444 expected from its amino acid sequence. Both gel filtration and sedimentation velocity centrifugation indicate that the native gpNu1 protein exists as a Mr greater than 500,000 aggregate. The sequence of the first 20 amino acids and the overall composition both match those predicted by the nucleotide sequence of the Nu1 gene. Purified gpNu1 is able to complement gpA-containing extracts in both lambda DNA packaging and cos cleavage assays. The Nu1 gene amino acid sequence predicts DNA binding by the protein, and gpNu1 does show specific binding to lambda DNA by filter binding assays. Also, as predicted from its sequence, gpNu1 exhibits ATPase activity; but in contrast to the holoenzyme, this activity is DNA-independent.     

Isolation and characterization of T4 bacteriophage gp17 terminase,a large subunit multimer with enhanced ATPase activity

Phage T4 terminase is a two-subunit enzyme that binds to the prohead portal protein and cuts and packages a headful of concatameric DNA. To characterize the T4 terminase large subunit, gp17 (70 kDa), gene 17 was cloned and expressed as a chitin-binding fusion protein. Following cleavage and release of gp17 from chitin, two additional column steps completed purification. The purification yielded (i) homogeneous soluble gp17 highly active in in vitro DNA packaging ( approximately 10% efficiency, >10(8) phage/ml of extract); (ii) gp17 lacking endonuclease and contaminating protease activities; and (iii) a DNA-independent ATPase activity stimulated >100-fold by the terminase small subunit, gp16 (18 kDa), and modestly by portal gp20 and single-stranded binding protein gp32 multimers. Analyses revealed a preparation of highly active and slightly active gp17 forms, and the latter could be removed by immunoprecipitation using antiserum raised against a denatured form of the gp17 protein, leaving a terminase with the increased specific activity (approximately 400 ATPs/gp17 monomer/min) required for DNA packaging. Analysis of gp17 complexes separated from gp16 on glycerol gradients showed that a prolonged enhanced ATPase activity persisted after exposure to gp16, suggesting that constant interaction of the two proteins may not be required during packaging.     

Bacteriophage lambda DNA packaging in vitro. The involvement of the lambda FI gene product, single-strand DNA, and a novel lambda-directed protein in the packaging reaction

The FI gene product (gp) of bacteriophage lambda is required during phage head assembly in vivo. Mutations in this gene lead to an accumulation of immature concatemeric lambda DNA and of proheads that appear normal and are competent for DNA packaging in vitro. This phenotype can be taken as evidence of a failure to couple DNA and proheads for packaging/maturation. In contrast to the requirement for gpFI in vivo, the packaging of lambda DNA in vitro occurs efficiently in the complete absence of gpFI. However, if ssDNA is included at the outset of the in vitro packaging reaction, DNA packaging is blocked. This block to packaging is relieved by addition of gpFI. Thus packaging of lambda DNA in vitro can be made dependent of gpFI by the inclusion of ssDNA at the outset of the reaction. Inhibition of DNA packaging by ssDNA appears to be mediated by a lambda b region-directed protein (packaging inhibitor, ben protein) that is present in the crude extracts of cells used to support the early steps of the packaging reaction. Neither ssDNA nor the packaging inhibitor alone has significant inhibitory effect on packaging; both components are required together to effect the inhibition that is relieved by gpFI. The packaging inhibitor was extensively purified and shown to have endonucleolytic activity. Several lines of evidence are presented to support the idea that both the inhibitory and endonucleolytic activities are functions of the same protein. Although gpFI relieves the inhibition imposed by the ben protein in packaging, gpFI fails to block the DNA cleavage activity of the ben protein in the standard endonuclease assay.     

Identification of the phoM gene product and its regulation in Escherichia coli K-12.

Plasmids containing the chromosome region of Escherichia coli encoding phoM, whose product is a positive regulator of alkaline phosphatase expression, were isolated from the Clarke and Carbon plasmid bank. A 9.9-kilobase EcoRI fragment of plasmid pLC17-39 (subcloned into pBR322) was able to complement both phoM and thrB mutations. Restriction endonuclease analysis and in vitro mutagenesis of the hybird plasmids enabled the localization of the phoM gene locus to 3 kilobases of the cloned chromosomal fragment. The phoM gene product was identified, with maxicell techniques, as a protein with an approximate molecular weight of 55,000. A phoM-lacZ protein fusion was constructed by using a plasmid carrying the phoM gene and a derivative of phage lambda, lambda plac Mu2. Restriction endonuclease analysis of the plasmid carrying the fusion indicated that phoM is transcribed in a clockwise direction on the circular E. coli chromosome. Analysis of strains bearing the fusion on a multiple-copy plasmid or integrated at the lambda attachment site of the chromosome indicated that the synthesis of the phoM gene product was unaffected by phosphate limitation of growth. The expression of the phoM gene was studied in strains with mutations in genes encoding effectors of the pho regulon. A threefold increase in phoM expression was seen in a phoU strain in comparison with the wild-type strain.     

The lambda terminase enzyme measures the point of its endonucleolytic attack 47 +/- 2 bp away from its site of specific DNA binding, the R site.

lambda terminase is an ATP-interactive, site-specific endonuclease comprising the products of lambda genes Nu1 and A. Terminase binds to cos, at the junction of two chromosomes in a concatemer, catalyzes cos cleavage and initiates the packaging of lambda DNA into proheads. cos consists of a nicking domain, cosN, where terminase cleaves to regenerate the 12 nucleotide cohesive ends of mature lambda chromosomes and a binding domain, cosB, where terminase binds to 16 bp repeat sequences called R3, R2 and R1. Evidence is presented that terminase is a single-strand endonuclease that can nick DNA by one of two mechanisms, both of which require ATP. (i) When bound to any R site, terminase nicks the strand which, within that R site, is purine-rich; the position of this nick is 47 +/- 2 nucleotides away from the mid-point of that R site, measured in the 3' direction; (ii) enzymes that are not bound to R sites nick DNA within certain specific sequences that resemble cosN half sites. These two modes of action are nicely combined for the R3-bound protomer that nicks the bottom strand at position N1 in cosN since the interval between N1 and the R3 midpoint is 47 nucleotides. Within cosN, the bottom and top strand nicks are generated by a rigid protein couple with a 2-fold rotational symmetry. The location of both of these nicks, however, is gauged asymmetrically from R3, 47 nucleotides away. Again, R1 and R2 are separated by 47 bp and orient bound protomers towards each other but, unless the DNA between these R sites is lengthened, the enzymes do not nick, indicating an inhibitory gpA-gpNu1 apposition.     

Genetic analysis of cosB, the binding site for terminase, the DNA packaging enzyme of bacteriophage lambda.

cosB, the binding site for terminase, the DNA packaging enzyme of bacteriophage lambda, consists of three binding sites (called R3, R2 and R1) for gpNu1, the small subunit of terminase; and I1, a binding site for integration host factor (IHF), the DNA bending protein of Escherichia coli. cosB is located between cosN, the site where terminase introduces staggered nicks to generate cohesive ends, and the Nu1 gene; the order of sites is: cosN-R3-I1-R2-R1-Nu1. A series of lambda mutants have been constructed that have single base-pair C-to-T transition mutations in R3, R2 and R1. A single base-pair transition mutation within any one of the gpNul binding sites renders lambda dependent upon IHF for plaque formation. lambda phage with mutations in both R2 and R3 are incapable of plaque formation even in the presence of IHF. Phages that carry DNA insertions between R1 and R2, from 7 to 20 base-pairs long, are also IHF-dependent, demonstrating the requirement for a precise spacing of gpNu1 binding sites within cosB. The IHF-dependent phenotype of a lambda mutant carrying a deletion of the R1 sequence indicates that IHF obviates the need for terminase binding to the R1 site. In contrast, a lambda mutant deleted for R2 and R1 fails to form plaques on either IHF+ or IHF- cells, indicating terminase binding of R2 is involved in suppression of R mutants by IHF. A fourth R sequence, R4, is situated on the left side of cosN; a phage with a mutant R4 sequence shows a reduced burst size on both an IHF+ and an IHF- host. The inability of the R4- mutant to be suppressed by IHF, plus the fact that R4 does not bind gpNu1, suggests R4 is not part of cosB and may play a role in DNA packaging that is distinct from that of cosB.