Effect of nitrate feeding strategies on lipid and biomass productivities in fed-batch cultures of Nannochloropsis gaditana

Controlled nitrate feeding strategies for fed-batch cultures of microalgae were applied for the enhancement of lipid production and microalgal growth rates. In particular, in this study, the effect of nitrate feeding rates on lipid and biomass productivities in fed-batch cultures of Nannochloropsis gaditana were investigated using three feeding modes (i.e., pulse, continuous, and staged) and under two light variations on both lipid productivity and fatty acid compositions. Higher nitrate levels negatively affected lipid production in the study. Increasing the light intensity increased the lipid contents of the microalgae in all three fed-batch feeding modes. A maximum of 58.3% lipid- to dry weight ratio was achieved when using pulse-fed cultures at an illumination of 200 μmol photons m⁻² s⁻¹ and 10 mg/day of nitrate feeding. This condition also resulted in the maximum lipid productivity of 44.6 mg L⁻¹ day⁻¹. The fatty acid compositions of the lipids consisted predominantly of long-chain fatty acids (C:16 and C:18) and accounted for 70% of the overall fatty acid methyl esters. Pulse feeding mode was found to significantly enhance the biomass and lipid production. The other two feeding modes (continuous and staged) were not ideal for lipid and biomass production. This study demonstrates the applicability of pulse feeding strategies in fed-batch cultures as an appropriate cultivation strategy that can increase both lipid accumulation and biomass production.     

Fed-batch culture: Modeling and application in the study of microbiol energetics

Microbial growth in the fed-batch mode is described by a simple unstructured model. The model is found to be in good agreement with agreement with the experimental observation, except under highly transient conditions. Extensive experimental data were collected and the energetics of the bacterium Klebsiella pneumoniae is evaluated. It is shown that the fed-batch culti vation is a powerful experimental tool in the study of microbial kinetics and energetics simultaneously. Methods for determining the maintenance requirements are shown and evaluated. The maintenance coefficients determined from fed-batch data are systematically smaller than those reported for continuous culture systems. Results suggest a decrease in maintenance demands at low specific growth rates.     

Effects of methanol on expression of an anticoagulant hirudin in recombinant Hansenula polymorpha

A series of batch, fed-batch, and continuous cultures was carried out to analyze the effects of methanol on the fermentation characteristics of recombinant Hansenula polymorpha for the production of hirudin, an anticoagulant. Hirudin expression efficiencies were greatly influenced by the methanol concentrations in continuous and fed-batch culture modes. At a steady state of continuous culture, an optimum methanol concentration of 1.7 g l⁻¹ was determined at a dilution rate of 0.18 h⁻¹ with 1.8 mg l⁻¹ h⁻¹ hirudin productivity. Journal of Industrial Microbiology & Biotechnology (2001) 27, 58–61. Received 21 September 2000/ Accepted in revised form 10 June 2001     

Regulation and optimization of xylanase production inClostridium thermolacticum

Summary In substrate-limited continuous or fed-batch cultures,Clostridium thermolacticum excreted high yield of xylanases even when readily metabolizable compounds such as glucose were used as substrate. These results demonstrated that theC. thermolacticum xylanases were constitutive and were catabolite repressed. Optimization of culture conditions showed that the highest yields were obtained in fed-batch culture.     

Production of xanthan by in-flow cultures of Xanthomonas campestris

The kinetics of xanthan formation in Xanthomonas campestris continuous and fed-batch fermentations was studied along with metabolic changes due to growth rate variation. A maximum growth rate within the range 0.11–0.12 h^–1 was obtained from the continuous culture data in defined medium, producing xanthan at rates up to 0.36 g l^–1 h^–1 corresponding to a maximum 67% glucose conversion at a dilution rate (D) of 0.05 h^–1. Comparatively, fed-batch cultivation was more efficient, producing maximum xanthan at 0.75 g l^–1 h^–1 and 63% glucose conversion at 0.1 h^–1. When reaching D=0.062 h^–1 in continuous cultures, a change was observed and the values of the specific rate of substrate consumption shifted, initiating an uncoupled growth region expressing a lack of balance of the catabolic and anabolic reactions. The deviation was not accompanied by a change in specific xanthan production indicating that xanthan metabolism was not affected by D. For fed-batch-grown X. campestris cells within the range D=0.03–0.1 h^–1, both metabolic parameters changed linearly with the growth rate showing a wide region coupled to growth. Outside that range, glucose accumulated and the specific xanthan production dropped, suggesting substrate inhibition. Correspondence to: J. C. Roseiro     

FeedER: a feedback-regulated enzyme-based slow-release system for fed-batch cultivation in microtiter plates

With the advent of modern genetic engineering methods, microcultivation systems have become increasingly important tools for accelerated strain phenotyping and bioprocess engineering. While these systems offer sophisticated capabilities to screen batch processes, they lack the ability to realize fed-batch processes, which are used more frequently in industrial bioprocessing. In this study, a novel approach to realize a feedback-regulated enzyme-based slow-release system (FeedER), allowing exponential fed-batch for microscale cultivations, was realized by extending our existing Mini Pilot Plant technology with a customized process control system. By continuously comparing the experimental growth rates with predefined set points, the automated dosage of Amyloglucosidase enzyme for the cleavage of dextrin polymers into d-glucose monomers is triggered. As a prerequisite for stable fed-batch operation, a constant pH is maintained by automated addition of ammonium hydroxide. We show the successful application of FeedER to study fed-batch growth of different industrial model organisms including Corynebacterium glutamicum, Pichia pastoris, and Escherichia coli. Moreover, the comparative analysis of a C. glutamicum GFP producer strain, cultivated under microscale batch and fed-batch conditions, revealed two times higher product yields under slow growing fed-batch operation. In summary, FeedER enables to run 48 parallel fed-batch experiments in an automated and miniaturized manner, and thereby accelerates industrial bioprocess development at the screening stage.

     

Process for the Stereoselective Biotransformation of Acetoacetic Acid Esters Using Yeasts

A process for the stereospecific reduction of acetoacetic acid esters to the 3-(S)-hydroxy-butanoic acid esters by the yeasts Saccharomyces cerevisiae and Candida utilis grown on glucose and ethanol media was developed. A continuous single stage steady state production system was found to be superior to pulse-, batch- and fed-batch systems in terms of optical product purity, biomass concentration and production rates.

Optical purity of 3-(S)-hydroxybutanoic acid esters produced with Saccharomyces cerevisiae and Candida utilis was dependent on pH. A maximal optical purity was obtained at pH2.2 from S. cerevisiae growing on ethanol medium. The specific product formation rate of the chemostat cultures was 0.02…0.05 gg^?1 h^?1. C. utilis was more productive than S. cerevisiae but it reconsumed the product under carbon limited growth conditions.     

Evaluation ofl-lactic acid production in batch, fed-batch, and continuous cultures ofRhizopus sp. MK-96-1196 using an airlift bioreactor

Various processes which producel-lactic acid using ammonia-tolerant mutant strain,Rhizopus sp. MK-96-1196, in a 3 L airlift bioreactor were evaluated. When the fed-batch culture was carried out by keeping the glucose concentration at 30 g/l, more than 140 g/l ofl-lactic acid was produced with a product yield of 83%. In the case of the batch culture with 200 g/l of initial glucose concentration, 121 g/L ofl-lactic acid was obtained but the low product yield based on the amount of glucose consumed. In the case of a continuous culture, 1.5 g/l/h of the volumetric productivity with a product yield of 71% was achieved at dilution rate of 0.024 h⁻¹. Basis on these results three processes were evaluated by simple variable cost estimation including carbon source, steam, and waste treatment costs. The total variable costs of the fed-batch and continuous cultures were 88% and 140%, respectively, compared to that of batch culture. The fed-batch culture with highl-lactic acid concentration and high product yield decreased variable costs, and was the best-suited for the industrial production ofl-lactic acid.     

Butyrate production in continuous culture of Clostridium tyrobutyricum: effect of end-product inhibition

Summary Production of butyrate has been studied in continuous cultures of Clostridium tyrobutyricum. Production of acids, gases and cell biomass were determined under conditions of glucose limitation by varying either the glucose input or the dilution rate. Addition of acetate or butyrate to the cultures was also tested. The results led to the proposition that inhibition by acids acting as incouplers of energy production could provide a physiological explanation for most of the phenomena observed. It readily accounted for the higher productivities but lower product concentrations obtained in continuous culture with respect to batch or fed-batch conditions. It also explained the decrease in the ratios of butyrate to total acids and in cell yield observed at higher glucose input as well as the behaviour of the cultures under conditions of excess glucose. It could also possibly account for the partial conversion of added acetate to butyrate observed at moderate growth rates. Offprint requests to: J. P. Vandecasteele     

Introducing substrate limitations to overcome catabolite repression in a protease producing Bacillus licheniformis strain using membrane-based fed-batch shake flasks

To overcome catabolite repression, industrial fermentation processes are usually operated in substrate-limited fed-batch mode. Therefore, the implementation of such an operating mode at small scale is crucial to maintain comparable process conditions. In this study, Bacillus licheniformis, a well-known producer of proteases, was cultivated with carbon (glucose)- and nitrogen (ammonium)-limited fed-batch conditions using the previously introduced membrane-based fed-batch shake flasks. A repression of protease production by glucose and ammonium was thus avoided and yields increased 1.5- and 2.1-fold relative to batch, respectively. An elevated feeding rate of glucose caused depletion of ammonium, which was recognizable within the oxygen transfer rate (OTR) signal measured with the Respiration Activity MOnitoring System (RAMOS). Ammonium limitation was prevented by feeding ammonium simultaneously with glucose. The OTR signal clearly indicated the initiation of the fed-batch phase and gave direct feedback on the nutrient release kinetics. Increased feeding rates of glucose and ammonium led to an elevated protease activity without affecting the protease yield (Y_P/Glu). In addition to Y_P/Glu, protease yields were determined based on the metabolized amount of oxygen . The results showed that the protease production correlated with the amount of consumed glucose as well as with the amount of consumed oxygen. The membrane-based fed-batch shake flask in combination with the RAMOS device is a powerful combination to investigate the effect of substrate-limited fed-batch conditions.     

High yield <Emphasis Type="Italic">Rhizopus chinenisis</Emphasis> prolipase production in <Emphasis Type="Italic">Pichia pastoris</Emphasis>: Impact of methanol concentration

Rhizopus lipases have been successfully expressed in Pichia pastors and different fermentation strategies have been investigated. However, there is no sufficient study on the effects of methanol concentration on the production of Rhizopus lipases in P. pastors. In this study, the lipase from Rhizopus chinensis CCTCC M20102 was expressed under different fed-batch fermentation conditions at methanol concentrations ranging from 0.5 to 3.5 g/L. The lipase activity, stability, and productivities were analyzed. The optimum methanol concentration was 1 g/L, with the highest lipase activity of 2,130 U/mL, without degradation. Additional information was obtained from the analysis of methanol consumption and production rates. The results also suggested that the cell concentration at the end of the glycerol fed-batch phase was very important for cell viability and protease activity.     

Optimisation of L-lysine production byCorynebacterium sp in fed-batch cultures

Summary The influence of initial concentration of glucose from 60 to 233 g/l on the production of L-lysine byCorynebacterium sp was studied first in batch culture. The maximum conversion rate into L-lysine was obtained at 165 g/l and the best specific production rate for L-lysine was observed at 65 g/l of glucose. In fed-batch fermentations, better conversion and the specific production rates were obtained. Maintaining of a high glucose concentration in the fed-batch technique allowed a 54% increase of the L-lysine production compared to the batch culture.     

Production of alkaline serine protease subtilisin Carlsberg by Bacillus licheniformis on complex medium in a stirred tank reactor

Bacillus licheniformis (DSM 641) was cultivated on complex medium in batch and fed-batch operations in a 20-l working volume stirred tank reactor. The medium composition (maltose, glucose, sucrose, fructose, ammonia, phosphate) and O₂ and CO₂ in the off-gas were monitored on-line; pH, pO₂, turbidity, culture fluorescence were monitored in situ; optical density, concentrations of sugars, amino acids, phosphate, proteins, DNA, protease activity and total solids content were monitored off-line. Problems of on-line sampling, cell concentration monitoring, and culture fluorescence measurements and the influence of medium components on the enzyme productivity are discussed. Close relationships between variations of pH, pO₂, O₂ transfer rate and CO₂ production rate on the one hand and cell mass and fluorescence intensity on the other were demonstrated in batch and in fed-batch cultures. Using suitable cultivation conditions, alkaline protease with high volume activity [15300 units (U)/ml] and specific activity (510 U/mg) was produced. By replacing the complex medium with a semisynthetic one, the volumetric activity was reduced by a factor of ten (to 1650 U/ml), but the specific productivity by a factor of only two (to 210 U/ml). Correspondence to: K. Schügerl     

Influence of culture modes on the microbial production of hyaluronic acid by <Emphasis Type="Italic">Streptococcus zooepidemicus</Emphasis>

The principal objective of this study was to assess the effects of culture modes including batch culture, pulse fed-batch culture, constant feeding rate fed-batch culture, and exponential fed-batch culture on the production of hyaluronic acid (HA) by Streptococcus zooepidemicus. Batch cultures had the highest levels of HA productivity, whereas fed-batch cultures were more favorable with regard to cell growth, and exponential fed-batch cultures evidenced the highest cell concentrations. A two-step culture model was proposed to enhance HA production: an exponential fed-batch culture was conducted prior to 8 h and then sucrose supplementation was applied for 8 h to start the batch fermentation of S. zooepidemicus. HA production and productivity were increased by 36 and 37% in the proposed two-step culture process as compared with that observed in the batch culture, respectively. The proposed two-step culture model can be applied in the production of secondary metabolites, and particularly of the exopolysaccharides.     

Controlling the sucrose concentration increases Coenzyme Q10 production in fed-batch culture of <Emphasis Type="Italic">Agrobacterium tumefaciens</Emphasis>

The production yield of Coenzyme Q₁₀ (CoQ₁₀) from the sucrose consumed by Agrobacterium tumefaciens KCCM 10413 decreased, and high levels of exopolysaccharide (EPS) accumulated after switching from batch culture to fed-batch culture. Therefore, we examined the effect of sucrose concentration on the fermentation profile by A. tumefaciens. In the continuous fed-batch culture with the sucrose concentration maintained constantly at 10, 20, 30, and 40 g l⁻¹, the dry cell weight (DCW), specific CoQ₁₀ content, CoQ₁₀ production, and the production yield of CoQ₁₀ from the sucrose consumed increased, whereas EPS production decreased as maintained sucrose concentration decreased. The pH-stat fed-batch culture system was adapted for CoQ₁₀ production to minimize the concentration of the carbon source and osmotic stress from sucrose. Using the pH-stat fed-batch culture system, the DCW, specific CoQ₁₀ content, CoQ₁₀ production, and the product yield of CoQ₁₀ from the sucrose consumed increased by 22.6, 13.7, 39.3, and 39.3%, respectively, whereas EPS production decreased by 30.7% compared to those of fed-batch culture in the previous report (Ha SJ, Kim SY, Seo JH, Oh DK, Lee JK, Appl Microbiol Biotechnol, 74:974–980, 2007). The pH-stat fed-batch culture system was scaled up to a pilot scale (300 l), and the CoQ₁₀ production results obtained (626.5 mg l⁻¹ of CoQ₁₀ and 9.25 mg g DCW⁻¹ of specific CoQ₁₀ content) were similar to those obtained at the laboratory scale. Thus, an efficient and highly competitive process for microbial CoQ₁₀ production is available.     

Oxygen-limited fed-batch process: an alternative control for Pichia pastoris recombinant protein processes

An oxygen-limited fed-batch technique (OLFB) was compared to traditional methanol-limited fed-batch technique (MLFB) for the production of recombinant Thai Rosewood β-glucosidase with Pichia pastoris. The degree of energy limitation, expressed as the relative rate of respiration (q _O/q _O,max), was kept similar in both the types of processes. Due to the higher driving force for oxygen transfer in the OLFB, the oxygen and methanol consumption rates were about 40% higher in the OLFB. The obligate aerobe P. pastoris responded to the severe oxygen limitation mainly by increased maintenance demand, measured as increased carbon dioxide production per methanol, but still somewhat higher cell density (5%) and higher product concentrations (16%) were obtained. The viability was similar, about 90–95%, in both process types, but the amount of total proteins released in the medium was much less in the OLFB processes resulting in substantially higher (64%) specific enzyme purity for input to the downstream processing.