Interactions of DNA with Biofilm-Derived Membrane Vesicles

The biofilm matrix contributes to the chemistry, structure, and function of biofilms. Biofilm-derived membrane vesicles (MVs) and DNA, both matrix components, demonstrated concentration-, pH-, and cation-dependent interactions. Furthermore, MV-DNA association influenced MV surface properties. This bears consequences for the reactivity and availability for interaction of matrix polymers and other constituents.The biofilm matrix contributes to the chemistry, structure, and function of biofilms and is crucial for the development of fundamental biofilm properties (46, 47). Early studies defined polysaccharides as the matrix component, but proteins, lipids, and nucleic acids are all now acknowledged as important contributors (7, 15). Indeed, DNA has emerged as a vital participant, fulfilling structural and functional roles (1, 5, 6, 19, 31, 34, 36, 41, 43, 44). The phosphodiester bond of DNA renders this polyanionic at a physiological pH, undoubtedly contributing to interactions with cations, humic substances, fine-dispersed minerals, and matrix entities (25, 41, 49).In addition to particulates such as flagella and pili, membrane vesicles (MVs) are also found within the matrices of gram-negative and mixed biofilms (3, 16, 40). MVs are multifunctional bilayered structures that bleb from the outer membranes of gram-negative bacteria (reviewed in references 4, 24, 27, 28, and 30) and are chemically heterogeneous, combining the known chemistries of the biofilm matrix. Examination of biofilm samples by transmission electron microscopy (TEM) has suggested that matrix material interacts with MVs (Fig. ​(Fig.1).1). Since MVs produced in planktonic culture have associated DNA (11, 12, 13, 20, 21, 30, 39, 48), could biofilm-derived MVs incorporate DNA (1, 39, 40, 44)?Open in a separate windowFIG. 1.Possible interactions between matrix polymers and particulate structures. Shown is an electron micrograph of a thin section through a P. aeruginosa PAO1 biofilm. During processing, some dehydration occurred, resulting in collapse of matrix material into fibrillate arrangements (black filled arrows). There is a suggestion of interactions occurring with particulate structures such as MVs (hollow white arrow) and flagella (filled white arrows) (identified by the appearance and cross-dimension of these highly ordered structures when viewed at high magnification), which was consistently observed with other embedded samples and also with whole-mount preparations of gently disrupted biofilms (data not shown). The scale bar represents 200 nm.     

Lactobacillus plantarum WCFS1 Electron Transport Chains

Lactobacillus plantarum WCFS1 requires both heme and menaquinone to induce respiration-like behavior under aerobic conditions. The addition of these compounds enhanced both biomass production, without progressive acidification, and the oxygen consumption rate. When both heme and menaquinone were present, L. plantarum WCFS1 was also able to reduce nitrate. The ability to reduce nitrate was severely inhibited by the glucose levels that are typically found in L. plantarum growth media (1 to 2% [vol/vol] glucose). In contrast, comparable mannitol levels did not inhibit the reduction of nitrate. L. plantarum reduced nitrate with concomitant formation of nitrite and ammonia. Genes that encode a bd-type cytochrome (cydABCD) and a nitrate reductase (narGHJI) were identified in the genome of L. plantarum. The narGHJI operon is part of a cluster of genes that includes the molybdopterin cofactor biosynthesis genes and narK. Besides a menaquinone source, isogenic mutants revealed that cydA and ndh1 are required for the aerobic-respiration-like response and narG for nitrate reduction. The ndh1 mutant was still able to reduce nitrate. The existence of a nonredundant branched electron transport chain in L. plantarum WCFS1 that is capable of using oxygen or nitrate as a terminal electron acceptor is proposed.Lactic acid bacteria (LAB) are extensively used for the production of fermented foods from dairy, meat, fruit, and vegetable sources. These fermented foods are valued for their enhanced shelf life, flavor, and structural properties. LAB have been exploited for this purpose for millennia and generally behave as facultative anaerobic, obligate fermentative bacteria.However, the production of cytochromes, typical constituents of respiratory chains, has been observed in several LAB species when they are grown in the presence of heme. These include Lactococcus lactis (Streptococcus lactis), Leuconostoc mesenteroides, and Enterococcus faecalis (36, 42).Recently, in L. lactis, generation of a proton motive force by a heme-dependent aerobic electron transport chain was demonstrated (9). In other words, heme induces respiration in L. lactis. L. lactis cells grown under these respiration-permissive conditions have enhanced biomass yields and are more robust (more resistant to oxygen, acid, and cold-storage stress) (15, 18, 31). Respiration-like behavior has also been reported for Streptococcus agalactiae and Oenococcus oeni (43; A. Gruss, unpublished results). However, there have been no published reports of heme-induced respiration-like behavior in any member of the genus Lactobacillus. This genus contains many species that are used extensively in food fermentation, such as Lactobacillus plantarum.L. plantarum has been isolated from the human gastrointestinal tract and plant surfaces. It is an economically important starter culture bacterium, to initiate food fermentation, and certain strains are even sold as probiotics (2, 3, 13, 40). Improvements in the efficiency of biomass formation and robustness, which are associated with respiration in L. lactis, are desirable traits for starter cultures, as well as probiotics.In this work, we investigated whether functional electron transport chains are present in L. plantarum. We analyzed the genome for components of electron transport chains and investigated the ability of L. plantarum to exploit extracellular electron acceptors.     

The S Helix Mediates Signal Transmission as a HAMP Domain Coiled-Coil Extension in the NarX Nitrate Sensor from Escherichia coli K-12

In the nitrate-responsive, homodimeric NarX sensor, two cytoplasmic membrane α-helices delimit the periplasmic ligand-binding domain. The HAMP domain, a four-helix parallel coiled-coil built from two α-helices (HD1 and HD2), immediately follows the second transmembrane helix. Previous computational studies identified a likely coiled-coil-forming α-helix, the signaling helix (S helix), in a range of signaling proteins, including eucaryal receptor guanylyl cyclases, but its function remains obscure. In NarX, the HAMP HD2 and S-helix regions overlap and apparently form a continuous coiled-coil marked by a heptad repeat stutter discontinuity at the distal boundary of HD2. Similar composite HD2-S-helix elements are present in other sensors, such as Sln1p from Saccharomyces cerevisiae. We constructed deletions and missense substitutions in the NarX S helix. Most caused constitutive signaling phenotypes. However, strongly impaired induction phenotypes were conferred by heptad deletions within the S-helix conserved core and also by deletions that remove the heptad stutter. The latter observation illuminates a key element of the dynamic bundle hypothesis for signaling across the heptad stutter adjacent to the HAMP domain in methyl-accepting chemotaxis proteins (Q. Zhou, P. Ames, and J. S. Parkinson, Mol. Microbiol. 73:801-814, 2009). Sequence comparisons identified other examples of heptad stutters between a HAMP domain and a contiguous coiled-coil-like heptad repeat sequence in conventional sensors, such as CpxA, EnvZ, PhoQ, and QseC; other S-helix-containing sensors, such as BarA and TorS; and the Neurospora crassa Nik-1 (Os-1) sensor that contains a tandem array of alternating HAMP and HAMP-like elements. Therefore, stutter elements may be broadly important for HAMP function.Transmembrane signaling in homodimeric bacterial sensors initiates upon signal ligand binding to the extracytoplasmic domain. In methyl-accepting chemotaxis proteins (MCPs), the resulting conformational change causes a displacement of one transmembrane α-helix (TM α-helix) relative to the other. This motion is conducted by the HAMP domain to control output domain activity (reviewed in references 33 and 39).Certain sensors of two-component regulatory systems share topological organization with MCPs. For example, the paralogous nitrate sensors NarX and NarQ contain an amino-terminal transmembrane signaling module similar to those in MCPs, in which a pair of TM α-helices delimit the periplasmic ligand-binding domain (Fig. ​(Fig.1)1) (24) (reviewed in references 32 and 62). The second TM α-helix connects to the HAMP domain. Hybrid proteins in which the NarX transmembrane signaling module regulates the kinase control modules of the MCPs Tar, DifA, and FrzCD demonstrate that NarX and MCPs share a mechanism for transmembrane signaling (73, 74, 81, 82).Open in a separate windowFIG. 1.NarX modular structure. Linear representation of the NarX protein sequence, from the amino (N) to carboxyl (C) termini, drawn to scale. The four modules are indicated at the top of the figure and shown in bold typeface, whereas domains within each module are labeled with standard (lightface) typeface. The nomenclature for modules follows that devised by Swain and Falke (67) for MCPs. Overlap between the HAMP domain HD2 and S-helix elements is indicated in gray. The three conserved Cys residues within the central module (62) are indicated. TM1 and TM2 denote the two transmembrane helices. Helices H1 to H4 of the periplasmic domain (24), and the transmitter domain H, N, D, G (79), and X (41) boxes, are labeled. The HPK 7 family of transmitter sequences, including NarX, have no F box and an unconventional G box (79). The scale bar at the bottom of the figure shows the number of aminoacyl residues.The HAMP domain functions as a signal conversion module in a variety of homodimeric proteins, including histidine protein kinases, adenylyl cyclases, MCPs, and certain phosphatases (12, 20, 77). This roughly 50-residue domain consists of a pair of amphiphilic α-helices, termed HD1 and HD2 (formerly AS1 and AS2) (67), joined by a connector (Fig. ​(Fig.2A).2A). Results from nuclear magnetic resonance (NMR) and electron paramagnetic resonance (EPR) spectroscopy, Cys and disulfide scanning, and mutational analysis converge on a model in which the HD1 and HD2 α-helices form a four-helix parallel coiled-coil (7, 20, 30, 42, 67, 75, 84). The mechanisms through which HAMP domains mediate signal conduction remain to be established (30, 42, 67, 84) (for commentary, see references 43, 49, and 50).Open in a separate windowFIG. 2.HAMP domain extensions. (A) Sequences from representative MCPs (E. coli Tsr and Salmonella enterica serovar Typhimurium Tar) and S-helix-containing sensors (E. coli NarX, NarQ, and BarA, and S. cerevisiae Sln1p). The HAMP domain, S-helix element, and the initial sequence of the MCP adaptation region are indicated. Flanking numbers denote positions of the terminal residues within the overall sequence. Sequential heptad repeats are indicated in alternating bold and standard (lightface) typeface. Numbering for heptad repeats in the methylation region and S-helix sequences has been described previously (4, 8). Numbers within the HD1 and HD2 helices indicate interactions within the HAMP domain (42). Residues at heptad positions a and d are enclosed within boxes, residues at the stutter position a/d are enclosed within a thickly outlined box, and residues in the S-helix ERT signature are in bold typeface. (B) NarX mutational alterations. Deletions are depicted as boxes, and missense substitutions are shown above the sequence. Many of these deletions were reported previously (10) and are presented here for comparison. The phenotypes conferred by the alterations are indicated as follows: impaired induction, black box; constitutive and elevated basal, light gray box; reversed response, dark gray box; wild-type, white box; null, striped box.Coiled-coils result from packing of two or more α-helices (27). The primary sequence of coiled-coils exhibits a characteristic heptad repeat pattern, denoted as a-b-c-d-e-f-g (52, 61), in which positions a and d are usually occupied by nonpolar residues (reviewed in references 1, 47, and 80). For example, the coiled-coil nature of the HAMP domain can be seen in the heptad repeat patterns within the HD1 and HD2 sequences (Fig. ​(Fig.2A2A).Coiled-coil elements adjacent to the HAMP domain have been identified in several sensors, including Saccharomyces cerevisiae Sln1p (69) and Escherichia coli NarX (60). Recently, this element was defined as a specific type of dimeric parallel coiled-coil, termed the signaling helix (S helix), present in a wide range of signaling proteins (8). Sequence comparisons delimit a roughly 40-residue element with a conserved heptad repeat pattern (Fig. ​(Fig.2A).2A). Based on mutational analyses of Sln1p and other proteins, the S helix is suggested to function as a switch that prevents constitutive activation of adjacent output domains (8).The term “signaling helix” previously was used to define the α4-TM2 extended helix in MCPs (23, 33). Here, we use the term S helix to denote the element described by Anantharaman et al. (8).The NarX and NarQ sensors encompass four distinct modules (Fig. ​(Fig.1):1): the amino-terminal transmembrane signaling module, the signal conversion module (including the HAMP domain and S-helix element), the central module of unknown function, and the carboxyl-terminal transmitter module (62). The S-helix element presumably functions together with the HAMP domain in conducting ligand-responsive motions from the transmembrane signaling module to the central module, ultimately regulating transmitter module activity.Regulatory output by two-component sensors reflects opposing transmitter activities (reviewed in reference 55). Positive function results from transmitter autokinase activity; the resulting phosphosensor serves as a substrate for response regulator autophosphorylation. Negative function results from transmitter phosphatase activity, which accelerates phosphoresponse regulator autodephosphorylation (reviewed in references 64 and 65). We envision a homogeneous two-state model for NarX (17), in which the equilibrium between these mutually exclusive conformations is modulated by ligand-responsive signaling.Previous work from our laboratory concerned the NarX and other HAMP domains (9, 10, 26, 77) and separately identified a conserved sequence in NarX and NarQ sensors, the Y box, that roughly corresponds to the S helix (62). Therefore, we were interested to explore the NarX S helix and to test some of the predictions made for its function. Results show that the S helix is critical for signal conduction and suggest that it functions as an extension of the HAMP HD2 α-helix in a subset of sensors exemplified by Sln1p and NarX. Moreover, a stutter discontinuity in the heptad repeat pattern was found to be essential for the NarX response to signal and to be conserved in several distinct classes of HAMP-containing sensors.     

Conserved and Variable Features of Gag Structure and Arrangement in Immature Retrovirus Particles

The assembly of retroviruses is driven by oligomerization of the Gag polyprotein. We have used cryo-electron tomography together with subtomogram averaging to describe the three-dimensional structure of in vitro-assembled Gag particles from human immunodeficiency virus, Mason-Pfizer monkey virus, and Rous sarcoma virus. These represent three different retroviral genera: the lentiviruses, betaretroviruses and alpharetroviruses. Comparison of the three structures reveals the features of the supramolecular organization of Gag that are conserved between genera and therefore reflect general principles of Gag-Gag interactions and the features that are specific to certain genera. All three Gag proteins assemble to form approximately spherical hexameric lattices with irregular defects. In all three genera, the N-terminal domain of CA is arranged in hexameric rings around large holes. Where the rings meet, 2-fold densities, assigned to the C-terminal domain of CA, extend between adjacent rings, and link together at the 6-fold symmetry axis with a density, which extends toward the center of the particle into the nucleic acid layer. Although this general arrangement is conserved, differences can be seen throughout the CA and spacer peptide regions. These differences can be related to sequence differences among the genera. We conclude that the arrangement of the structural domains of CA is well conserved across genera, whereas the relationship between CA, the spacer peptide region, and the nucleic acid is more specific to each genus.Retrovirus assembly is driven by the oligomerization of Gag, a multidomain protein, including an N-terminal membrane binding domain (MA), a two-domain structural component (CA), and an RNA binding domain (NC). The Gag proteins of all orthoretroviruses, including the alpha-, beta-, and lentiretroviruses discussed here, share this conserved modular architecture (Fig. ​(Fig.1).1). Despite very weak sequence conservation, the tertiary structures of MA, CA, and NC are conserved among retroviruses. Outside these conserved domains the Gag proteins of different retroviruses exhibit substantial variability. Other domains may be present or absent, and the length and sequence of linker peptides may also vary (12) (Fig. ​(Fig.11).Open in a separate windowFIG. 1.Modular architecture of the full-length Gag proteins of HIV, M-PMV, and RSV. White rectangles illustrate Gag polyprotein cleavage products. The extent of the constructs used in the electron microscopic analysis is specified under each protein as a black rectangle. Gray triangles specify cleavage sites. Residue numbers are counted from the beginning of Gag.Oligomerization of Gag in an infected cell leads to the formation of roughly spherical immature virus particles, where Gag is arranged in a radial fashion with the N-terminal MA domain associated with a surrounding lipid bilayer, and the more C-terminal NC pointing toward the center of the particle (15, 44, 46). Subsequent multiple cleavages of Gag by the viral protease lead to a rearrangement of the virus. NC and the RNA condense in the center of the particle, CA assembles into a capsid or shell around the nucleoprotein, and MA remains associated with the viral membrane. This proteolytic maturation is required to generate an infectious virion (2). In contrast to the mature CA lattice, which has been extensively studied (11, 16, 36), the Gag lattice in immature particles is incompletely understood.Gag itself contains all of the necessary determinants for particle assembly. For example, the expression of Gag alone in an insect cell expression system is sufficient to generate viruslike particles (3, 17, 22, 38). Retroviral Gag proteins also can be assembled in vitro in the presence of nucleic acids to form spherical particles (9, 19, 39, 43, 47). The arrangement of Gag within these in vitro-assembled Gag particles is indistinguishable from that found in immature virus particles (6), and the in vitro assembly systems have proved valuable for unraveling the principles of virus assembly (18, 28, 29, 39). Multiple layers of interaction promote the assembly of Gag in vivo, including MA-membrane-MA interactions, CA-CA interactions, and NC-RNA-NC interactions. An extensive body of literature has explored which regions of Gag are required for assembly and which can be replaced or deleted without compromising assembly. MA-membrane-MA interactions contribute but are not essential. NC-RNA-NC interactions appear to function to nonspecifically link Gag molecules together and can be replaced both in vivo and in vitro by other interaction domains such as leucine zippers (4, 13, 20, 32, 48). The C-terminal domain of CA (referred to here as C-CA) and the stretch of amino acids immediately following this domain (termed the spacer peptide [SP] region) are critical for assembly and sensitive to mutation (1, 22, 27, 30).We set out to understand how the substantial sequence variation among Gag proteins in different retroviruses is manifested in structural differences in the immature Gag lattice. To do this, we studied three retroviruses from different genera: the lentivirus human immunodeficiency virus type 1 (HIV-1), the betaretrovirus Mason-Pfizer monkey virus (M-PMV), and the alpharetrovirus Rous sarcoma virus (RSV). These retroviruses are those for which in vitro assembly was first established and has been most extensively studied (6, 19, 24, 28, 29, 35, 43, 47).The domain structures of the three retroviruses differ most substantially upstream of CA. Both M-PMV and RSV have domains located between MA and CA that are absent in HIV (Fig. ​(Fig.1).1). In M-PMV there are 198 residues forming the pp24 and p12 domains; in RSV there are 84 residues forming the p2a, p2b, and p10 domains. The three retroviruses have different requirements for regions upstream of CA during assembly. The C-terminal 25 residues of p10 are essential for proper immature RSV assembly, both in vitro and in vivo, and these residues are inferred to interact directly with N-CA to stabilize the hexamer by forming contacts between adjacent N-CA domains (35). An equivalent assembly domain has not been described for other retroviruses. Within M-PMV p12 is the so-called internal scaffolding domain that is not essential for assembly in vitro (43) but is required for particle assembly when the precursor is expressed under the control of the M-PMV promoter (41). It is a key domain for the membrane-independent assembly of immature capsids (40).In HIV, five residues upstream of CA must be present for assembly of immature virus-like spherical particles in vitro, although larger upstream extensions, including part of MA, are required for efficient assembly of regular particles, both for HIV and RSV. For HIV, if the entire MA domain is included, in vitro assembly requires the presence of inositol penta- or hexakis phosphate (8). If no sequences upstream of CA are present, the in vitro particles in both of these viruses adopt a mature-type tubular morphology (10, 18). It has been hypothesized that cleavage at the N terminus of N-CA during maturation leads to the N-terminal residues of CA folding back into the N-CA structure to form a β-hairpin. The β-hairpin is important for assembly of the mature CA lattice, whereas its absence is important for immature assembly (23, 42). These requirements explain why, in HIV and RSV, immature Gag lattice-like structures are formed only if regions upstream of CA are present (18). In M-PMV, an immature Gag lattice can be produced when the regions upstream of CA are deleted if this is combined with mutations (such as deleting the initial proline of CA), which prevent β-hairpin formation (43).During maturation, HIV and RSV Gag proteins are cleaved twice between CA and NC to release a small peptide called SP1 or SP. In RSV the most N-terminal of these two cleavages can occur at one of two possible positions such that the released peptide is either 9 or 12 amino acids long (33). In M-PMV only one cleavage occurs between CA and NC, and no short peptide is produced. The region between the final helix of CA and the Zn fingers has been proposed to adopt a helical bundle architecture in HIV and RSV based on bioinformatic prediction, on mutational analysis, and on structural studies (1, 22, 27, 45). In all three viruses, C-CA and the residues immediately downstream are critical for assembly and are sensitive to mutation. C-CA contains the major homology region, a group of residues that are highly conserved across the retroviruses.Cryo-electron tomography (cET) studies of immature virus particles (6, 45) have resolved the electron density of the HIV Gag lattice in three dimensions at low resolution. Using these methods, we have also described the three-dimensional architecture of in vitro-assembled HIV Gag particles (6). In immature viruses and in vitro-assembled particles, Gag is seen to adopt an 8 nm hexameric lattice, as was predicted from previous Fourier analysis of two-dimensional images (7, 46). The hexameric lattice is interrupted by irregularly shaped holes and cracks in the lattice (6, 45). A similar observation has been made using AFM of in vitro-assembled particles of M-PMV Gag (26). These holes and cracks allow an otherwise planar hexameric lattice to form the surface of an approximately spherical particle.The radial positions of the MA, CA, and NC domains had been assigned previously from cryo-electron micrographs (44, 46). Based on these assignments and the shape of the density, the position and relative orientations of CA domains can be modeled into the low-resolution structure of the HIV lattice (6, 45). Density ascribed to the N-terminal domain of CA (N-CA) forms rings around large holes at the 6-fold symmetry positions in the lattice. Below this layer, at the expected radius of the C-CA, are 2-fold densities, interpreted as corresponding to dimers of C-CA. These densities are linked by rodlike densities, which descend into the NC-nucleic acid layer.HIV is the only retrovirus for which the arrangement of Gag in the immature particle has been described in three dimensions. Prior to this work, important open questions were therefore: which features of the arrangement of Gag are conserved between genera and therefore reflect general principles of Gag-Gag interactions, and which features are specific to certain genera? We have applied subtomogram averaging of cryo-electron tomograms to generate reconstructions of in vitro-assembled Gag particles from HIV, M-PMV, and RSV. These allow identification of the general and variable features of the arrangement of Gag and the architecture of immature retroviruses.     

A Putative ABC Transporter,HatABCDE, Is among Molecular Determinants of Pyomelanin Production in Pseudomonas aeruginosa

Pyomelanin overproduction is a common phenotype among Pseudomonas aeruginosa isolates recovered from cystic fibrosis and urinary tract infections. Its prevalence suggests that it contributes to the persistence of the producing microbial community, yet little is known about the mechanisms of its production. Using transposon mutagenesis, we identified factors that contribute to melanogenesis in a clinical isolate of P. aeruginosa. In addition to two enzymes already known to be involved in its biosynthesis (homogentisate dioxygenase and hydroxyphenylpyruvate dioxygenase), we identified 26 genes that encode regulatory, metabolic, transport, and hypothetical proteins that contribute to the production of homogentisic acid (HGA), the monomeric precursor of pyomelanin. One of these, PA14_57880, was independently identified four times and is predicted to encode the ATP-binding cassette of an ABC transporter homologous to proteins in Pseudomonas putida responsible for the extrusion of organic solvents from the cytosol. Quantification of HGA production by P. aeruginosa PA14 strains missing the predicted subcomponents of this transporter confirmed its role in HGA production: mutants unable to produce the ATP-binding cassette (PA14_57880) or the permease (PA14_57870) produced substantially less extracellular HGA after growth for 20 h than the parental strain. In these mutants, concurrent accumulation of intracellular HGA was observed. In addition, quantitative real-time PCR revealed that intracellular accumulation of HGA elicits upregulation of these transport genes. Based on their involvement in homogentisic acid transport, we rename the genes of this operon hatABCDE.Pseudomonas aeruginosa is a metabolically versatile, opportunistic pathogen that is a major cause of life-threatening infections in patients with burn wounds, compromised immunity, chronic obstructive pulmonary disease (COPD), and cystic fibrosis (CF) (23, 41). A major contributor to P. aeruginosa''s pathogenicity is its remarkable genomic plasticity, which often results is a wide range of phenotypic variation among isolates obtained from both acute and chronic infections. These phenotypes include small colony variant formation (24), alginate overproduction (36), hyperpigmentation (22), autoaggregation (13), and autolysis (64). Many of these phenotypes evolve as infections progress, and most have been ascribed to “loss-of-function” genome diversification that promotes long-term survival in the host environment (54). In this regard, recent studies have stimulated interest in another example of a loss-of-function phenotype, the mutation or deletion of hmgA, which encodes the homogentisate 1,2-dioxygenase enzyme. The absence of this protein leads to the accumulation and subsequent export of homogentisic acid (HGA), which ultimately aggregates into the pyomelanin polymer that manifests as a reddish brown pigmentation of P. aeruginosa colonies and their surrounding milieu (Fig. ​(Fig.1A)1A) (5, 49).Open in a separate windowFIG. 1.Pyomelanin production by the PA14 ΔhmgA and DKN343 strains. (A) Homogentisate pathway for the catabolism of chorismate and aromatic amino acids. Enzyme names are shown above the arrows for each step. A mutation or deletion of the hmgA gene (encoding homogentisate 1,2-dioxygenase) leads to the accumulation of pyomelanin. (B) Pyomelanin overproduction by the PA14 ΔhmgA mutant is abolished when complemented with an intact hmgA gene. Complementation of a melanogenic clinical P. aeruginosa isolate, DKN343, with hmgA results in no phenotypic change, indicating that other factors contribute to its pigmentation.Production of pyomelanin (and other forms of melanin) has been described to occur in a wide range of bacterial species, including Aeromonas (4), Azotobacter (51), Azospirillum (50), Bacillus (3), Legionella (8), Marinomonas (33), Micrococcus (40), Mycobacterium (45), Proteus (1), Rhizobium (12), Shewanella (61), Sinorhizobium (38), Streptomyces (67), and Vibrio (63) species. Notably, isolates of other bacterial species associated with chronic infections of the CF lung, Burkholderia cenocepacia and Stenotrophomonas maltophilia, can also be melanogenic (28, 58), suggesting a possible role for this pigment in the establishment and/or persistence of infection. Some genera produce melanin under normal conditions via polyphenol oxidases or laccases, while others synthesize the pigment only in response to specific environmental conditions (17, 35). Many species, however, including P. aeruginosa, overproduce pyomelanin as a result of a point mutation in hmgA or large chromosomal deletions of loci containing the homogentisate operon (2, 19). While these genetic variations have been frequently reported, there is little understanding of the competitive advantage, if any, that this pigment confers to the producing bacterium.Proposed roles for pyomelanin include the enhancement of bacterial surface attachment (20), extracellular electron transfer (61), iron reduction/acquisition (8), induction of virulence factor expression (63), heavy metal binding (21), and protection from environmental stress (11, 28, 32, 44, 53, 65). A protective role has also been proposed to occur in P. aeruginosa PA14, where pyomelanin was shown to contribute to the persistence of an overproducing strain in a chronic CF infection model in mice (49). However, given that melanogenic isolates have been recovered from laboratory-grown communities of P. aeruginosa PAO1 (5, 56), it is probable that pyomelanin plays other roles in addition to protection against host defense mechanisms.As a first step toward gaining a better understanding of pyomelanin function, we sought to identify the molecular determinants of its production in P. aeruginosa. By screening a library of pTnTet/minimariner transposon mutants of a pyomelanin-overproducing clinical isolate for alterations in pigmentation, we identified several genes whose products are involved in tyrosine catabolism, central metabolic pathways, nucleotide biosynthesis, regulation, and membrane transport, in addition to hypothetical proteins of unknown function. We chose to further characterize the gene identified most frequently in our screen, one annotated as encoding a putative ATP-binding cassette of an ABC-type transporter. Here, we demonstrate that this transporter is involved in HGA transport and the subsequent extracellular formation of pyomelanin.     

A New Borrelia Species Defined by Multilocus Sequence Analysis of Housekeeping Genes

Analysis of Lyme borreliosis (LB) spirochetes, using a novel multilocus sequence analysis scheme, revealed that OspA serotype 4 strains (a rodent-associated ecotype) of Borrelia garinii were sufficiently genetically distinct from bird-associated B. garinii strains to deserve species status. We suggest that OspA serotype 4 strains be raised to species status and named Borrelia bavariensis sp. nov. The rooted phylogenetic trees provide novel insights into the evolutionary history of LB spirochetes.Multilocus sequence typing (MLST) and multilocus sequence analysis (MLSA) have been shown to be powerful and pragmatic molecular methods for typing large numbers of microbial strains for population genetics studies, delineation of species, and assignment of strains to defined bacterial species (4, 13, 27, 40, 44). To date, MLST/MLSA schemes have been applied only to a few vector-borne microbial populations (1, 6, 30, 37, 40, 41, 47).Lyme borreliosis (LB) spirochetes comprise a diverse group of zoonotic bacteria which are transmitted among vertebrate hosts by ixodid (hard) ticks. The most common agents of human LB are Borrelia burgdorferi (sensu stricto), Borrelia afzelii, Borrelia garinii, Borrelia lusitaniae, and Borrelia spielmanii (7, 8, 12, 35). To date, 15 species have been named within the group of LB spirochetes (6, 31, 32, 37, 38, 41). While several of these LB species have been delineated using whole DNA-DNA hybridization (3, 20, 33), most ecological or epidemiological studies have been using single loci (5, 9-11, 29, 34, 36, 38, 42, 51, 53). Although some of these loci have been convenient for species assignment of strains or to address particular epidemiological questions, they may be unsuitable to resolve evolutionary relationships among LB species, because it is not possible to define any outgroup. For example, both the 5S-23S intergenic spacer (5S-23S IGS) and the gene encoding the outer surface protein A (ospA) are present only in LB spirochete genomes (36, 43). The advantage of using appropriate housekeeping genes of LB group spirochetes is that phylogenetic trees can be rooted with sequences of relapsing fever spirochetes. This renders the data amenable to detailed evolutionary studies of LB spirochetes.LB group spirochetes differ remarkably in their patterns and levels of host association, which are likely to affect their population structures (22, 24, 46, 48). Of the three main Eurasian Borrelia species, B. afzelii is adapted to rodents, whereas B. valaisiana and most strains of B. garinii are maintained by birds (12, 15, 16, 23, 26, 45). However, B. garinii OspA serotype 4 strains in Europe have been shown to be transmitted by rodents (17, 18) and, therefore, constitute a distinct ecotype within B. garinii. These strains have also been associated with high pathogenicity in humans, and their finer-scale geographical distribution seems highly focal (10, 34, 52, 53).In this study, we analyzed the intra- and interspecific phylogenetic relationships of B. burgdorferi, B. afzelii, B. garinii, B. valaisiana, B. lusitaniae, B. bissettii, and B. spielmanii by means of a novel MLSA scheme based on chromosomal housekeeping genes (30, 48).     

Metabolic Engineering of the Tricarboxylic Acid Cycle for Improved Lysine Production by Corynebacterium glutamicum

In the present work, lysine production by Corynebacterium glutamicum was improved by metabolic engineering of the tricarboxylic acid (TCA) cycle. The 70% decreased activity of isocitrate dehydrogenase, achieved by start codon exchange, resulted in a >40% improved lysine production. By flux analysis, this could be correlated to a flux shift from the TCA cycle toward anaplerotic carboxylation.With an annual market volume of more than 1,000,000 tons, lysine is one of the dominating products in biotechnology. In recent years, rational metabolic engineering has emerged as a powerful tool for lysine production (16, 18, 22). Hereby, different target enzymes and pathways in the central metabolism could be identified and successfully modified to create superior production strains (1, 2, 5, 8, 10, 17-20). The tricarboxylic acid (TCA) cycle has not been rationally engineered so far, despite its major role in Corynebacterium glutamicum (6). From metabolic flux studies, however, it seems that the TCA cycle might offer a great potential for optimization (Fig. ​(Fig.1),1), which is also predicted from in silico pathway analysis (13, 22). Experimental evidence comes from studies with Brevibacterium flavum exhibiting increased lysine production due to an induced bottleneck toward the TCA cycle (21). In the present work, we performed TCA cycle engineering by downregulation of isocitrate dehydrogenase (ICD). ICD is the highest expressed TCA cycle enzyme in C. glutamicum (7). Downregulation was achieved by start codon exchange, controlling ICD expression on the level of translation.Open in a separate windowFIG. 1.Stoichiometric correlation of lysine yield (%), biomass yield (g/mol) and TCA cycle flux (%; entry flux through citrate synthase) determined by ¹³C metabolic flux analysis achieved by paraboloid fitting of the data set (parameters were determined with Y0 = 105.1, a = −1.27, b = 0.35, c = −9.35 × 10⁻³, d = −11.16 × 10⁻³). The data displayed represent values from 18 independent experiments with different C. glutamicum strains taken from previous studies (1-3, 11, 12, 15, 23).     

Inhibition of the Activity of Both Domains of Lysostaphin through Peptidoglycan Modification by the Lysostaphin Immunity Protein

Resistance to lysostaphin, a staphylolytic glycylglycine endopeptidase, is due to a FemABX-like immunity protein that inserts serines in place of some glycines in peptidoglycan cross bridges. These modifications inhibit both binding of the recombinant cell wall targeting domain and catalysis by the recombinant catalytic domain of lysostaphin.Lysostaphin is a glycylglycine endopeptidase produced by Staphylococcus simulans biovar staphylolyticus (18) that lyses susceptible staphylococci by hydrolyzing the polyglycine cross bridges in their cell wall peptidoglycans (3). The lysostaphin gene sequence was independently determined in 1987 by two groups (8, 13). BLAST analysis (1) of mature lysostaphin revealed two domains: an N-terminal catalytic domain (CAT), which is a member of the M23 family of zinc metalloendopeptidases, and a C-terminal cell wall targeting domain (CWT), which is a member of the SH3b domain family (Fig. ​(Fig.11 A).Open in a separate windowFIG. 1.(A) Schematic diagram of mature lysostaphin, the recombinant catalytic domain (rCAT) (lysostaphin residues 1 to 148), and the recombinant cell wall targeting domain (rCWT) (lysostaphin residues 149 to 246). The numbers represent the beginning and end of the domains, and the solid boxes indicate the N-terminal His₆ tag of the recombinant proteins. (B) SDS-PAGE analysis of rCAT and rCWT purified by a nickel affinity column. Mobilities of molecular mass standards are given on the left side of the gel.The lysostaphin endopeptidase resistance gene (epr or lif) encodes a FemABX-like immunity protein that is located adjacent to the lysostaphin gene on the plasmid pACK1 in S. simulans bv. staphylolyticus (4, 7, 20). Members of the FemABX family of proteins are nonribosomal peptidyl transferases that are involved in the addition of cross bridge amino acids during peptidoglycan subunit synthesis in the cytoplasm (15). In S. simulans bv. staphylolyticus, the lysostaphin immunity protein inserts serines in place of some glycines during peptidoglycan synthesis, which provides resistance to lysostaphin (4, 20).Originally it was suggested that the incorporation of serines in these peptidoglycan cross bridges gave increased resistance to lysostaphin because of the inability of the enzyme to hydrolyze glycyl-serine or seryl-glycine bonds (4, 14, 16). Others later reported that the CWT specifically binds to the polyglycine cross bridges in staphylococci (6) and the binding of CWT to producer-strain cells was less than that to susceptible cells (2). However, the ability of the enzyme or its targeting domain to bind to purified peptidoglycans from staphylococci containing the lysostaphin resistance gene has not been determined. Therefore, we determined if the modification to staphylococcal peptidoglycan cross bridges made by the lysostaphin immunity protein affected the activity of the binding domain, the catalytic domain, or both.     

Alignment of the c-Type Cytochrome OmcS along Pili of Geobacter sulfurreducens

Immunogold localization revealed that OmcS, a cytochrome that is required for Fe(III) oxide reduction by Geobacter sulfurreducens, was localized along the pili. The apparent spacing between OmcS molecules suggests that OmcS facilitates electron transfer from pili to Fe(III) oxides rather than promoting electron conduction along the length of the pili.There are multiple competing/complementary models for extracellular electron transfer in Fe(III)- and electrode-reducing microorganisms (8, 18, 20, 44). Which mechanisms prevail in different microorganisms or environmental conditions may greatly influence which microorganisms compete most successfully in sedimentary environments or on the surfaces of electrodes and can impact practical decisions on the best strategies to promote Fe(III) reduction for bioremediation applications (18, 19) or to enhance the power output of microbial fuel cells (18, 21).The three most commonly considered mechanisms for electron transfer to extracellular electron acceptors are (i) direct contact between redox-active proteins on the outer surfaces of the cells and the electron acceptor, (ii) electron transfer via soluble electron shuttling molecules, and (iii) the conduction of electrons along pili or other filamentous structures. Evidence for the first mechanism includes the necessity for direct cell-Fe(III) oxide contact in Geobacter species (34) and the finding that intensively studied Fe(III)- and electrode-reducing microorganisms, such as Geobacter sulfurreducens and Shewanella oneidensis MR-1, display redox-active proteins on their outer cell surfaces that could have access to extracellular electron acceptors (1, 2, 12, 15, 27, 28, 31-33). Deletion of the genes for these proteins often inhibits Fe(III) reduction (1, 4, 7, 15, 17, 28, 40) and electron transfer to electrodes (5, 7, 11, 33). In some instances, these proteins have been purified and shown to have the capacity to reduce Fe(III) and other potential electron acceptors in vitro (10, 13, 29, 38, 42, 43, 48, 49).Evidence for the second mechanism includes the ability of some microorganisms to reduce Fe(III) that they cannot directly contact, which can be associated with the accumulation of soluble substances that can promote electron shuttling (17, 22, 26, 35, 36, 47). In microbial fuel cell studies, an abundance of planktonic cells and/or the loss of current-producing capacity when the medium is replaced is consistent with the presence of an electron shuttle (3, 14, 26). Furthermore, a soluble electron shuttle is the most likely explanation for the electrochemical signatures of some microorganisms growing on an electrode surface (26, 46).Evidence for the third mechanism is more circumstantial (19). Filaments that have conductive properties have been identified in Shewanella (7) and Geobacter (41) species. To date, conductance has been measured only across the diameter of the filaments, not along the length. The evidence that the conductive filaments were involved in extracellular electron transfer in Shewanella was the finding that deletion of the genes for the c-type cytochromes OmcA and MtrC, which are necessary for extracellular electron transfer, resulted in nonconductive filaments, suggesting that the cytochromes were associated with the filaments (7). However, subsequent studies specifically designed to localize these cytochromes revealed that, although the cytochromes were extracellular, they were attached to the cells or in the exopolymeric matrix and not aligned along the pili (24, 25, 30, 40, 43). Subsequent reviews of electron transfer to Fe(III) in Shewanella oneidensis (44, 45) appear to have dropped the nanowire concept and focused on the first and second mechanisms.Geobacter sulfurreducens has a number of c-type cytochromes (15, 28) and multicopper proteins (12, 27) that have been demonstrated or proposed to be on the outer cell surface and are essential for extracellular electron transfer. Immunolocalization and proteolysis studies demonstrated that the cytochrome OmcB, which is essential for optimal Fe(III) reduction (15) and highly expressed during growth on electrodes (33), is embedded in the outer membrane (39), whereas the multicopper protein OmpB, which is also required for Fe(III) oxide reduction (27), is exposed on the outer cell surface (39).OmcS is one of the most abundant cytochromes that can readily be sheared from the outer surfaces of G. sulfurreducens cells (28). It is essential for the reduction of Fe(III) oxide (28) and for electron transfer to electrodes under some conditions (11). Therefore, the localization of this important protein was further investigated.     

Metabolic Engineering of Saccharomyces cerevisiae for Production of Novel Cyanophycins with an Extended Range of Constituent Amino Acids

Cyanophycin (multi-l-arginyl-poly-l-aspartic acid; also known as cyanophycin grana peptide [CGP]) is a putative precursor for numerous biodegradable technically used chemicals. Therefore, the biosynthesis and production of the polymer in recombinant organisms is of special interest. The synthesis of cyanophycin derivatives consisting of a wider range of constituents would broaden the applications of this polymer. We applied recombinant Saccharomyces cerevisiae strains defective in arginine metabolism and expressing the cyanophycin synthetase of Synechocystis sp. strain PCC 6308 in order to synthesize CGP with citrulline and ornithine as constituents. Strains defective in arginine degradation (Car1 and Car2) accumulated up to 4% (wt/wt) CGP, whereas strains defective in arginine synthesis (Arg1, Arg3, and Arg4) accumulated up to 15.3% (wt/wt) of CGP, which is more than twofold higher than the previously content reported in yeast and the highest content ever reported in eukaryotes. Characterization of the isolated polymers by different analytical methods indicated that CGP synthesized by strain Arg1 (with argininosuccinate synthetase deleted) consisted of up to 20 mol% of citrulline, whereas CGP from strain Arg3 (with ornithine carbamoyltransferase deleted) consisted of up to 8 mol% of ornithine, and CGP isolated from strain Arg4 (with argininosuccinate lyase deleted) consisted of up to 16 mol% lysine. Cultivation experiments indicated that the incorporation of citrulline or ornithine is enhanced by the addition of low amounts of arginine (2 mM) and also by the addition of ornithine or citrulline (10 to 40 mM), respectively, to the medium.Cyanophycin (multi-l-arginyl-poly-[l-aspartic acid]), also referred to as cyanophycin grana peptide (CGP), represents a polydisperse nonribosomally synthesized polypeptide consisting of poly(aspartic acid) as backbone and arginine residues bound to each aspartate (49) (Fig. ​(Fig.1).1). One enzyme only, referred to as cyanophycin synthetase (CphA), catalyzes the synthesis of the polymer from amino acids (55). Several CphAs originating from different bacteria exhibit specific features (2, 7, 5, 32, 50, 51). CphAs from the cyanobacteria Synechocystis sp. strain PCC 6308 and Anabaena variabilis ATCC 29413, respectively, exhibit a wide substrate range in vitro (2, 7), whereas CphA from Acinetobacter baylyi or Nostoc ellipsosporum incorporates only aspartate and arginine (23, 24, 32). CphA from Thermosynechococcus elongatus catalyzes the synthesis of CGP primer independently (5); CphA from Synechococcus sp. strain MA19 exhibits high thermostability (22). Furthermore, two types of CGP were observed concerning its solubility behavior: (i) a water-insoluble type that becomes soluble at high or low pH (34, 48) and (ii) a water-soluble type that was only recently observed in recombinant organisms (19, 26, 42, 50, 56). In the past, bacteria were mainly applied for the synthesis of CGP (3, 14, 18, 53), whereas recently there has been greater interest in synthesis in eukaryotes (26, 42, 50). CGP was accumulated to almost 7% (wt/wt) of dry matter in recombinant Nicotiana tabacum and Saccharomyces cerevisiae (26, 50).Open in a separate windowFIG. 1.Chemical structures of dipeptide building blocks of CGP variants detected in vivo. Structure: 1, aspartate-arginine; 2, aspartate-lysine; 3, aspartate-citrulline; 4, aspartate-ornithine. Aspartic acid is presented in black; the second amino acid of the dipeptide building blocks is shown in gray. The nomenclature of the carbon atoms is given.In S. cerevisiae the arginine metabolism is well understood and has been investigated (30) (see Fig. ​Fig.2).2). Arginine is synthesized from glutamate via ornithine and citrulline in eight successive steps. The enzymes acetylglutamate synthase, acetylglutamate kinase, N-acetyl-γ-glutamylphosphate reductase, and acetylornithine aminotransferase are involved in the formation of N-α-acetylornithine. The latter is converted to ornithine by acetylornithine acetyltransferase. In the next step, ornithine carbamoyltransferase (ARG3) condenses ornithine with carbamoylphosphate, yielding citrulline. Citrulline is then converted to l-argininosuccinate by argininosuccinate synthetase. The latter is in the final step cleaved into fumarate and arginine by argininosuccinate lyase (ARG4). The first five steps occur in the mitochondria, whereas the last three reactions occur in the cytosol (28, 54). Arginine degradation is initiated by arginase (CAR1) and ornithine aminotransferase (CAR2) (10, 11, 38, 39).Open in a separate windowFIG. 2.Schematic overview of the arginine metabolism in S. cerevisiae. Reactions shown in the shaded area occur in the mitochondria, while the other reactions are catalyzed in the cytosol. Abbreviations: ARG2, acetylglutamate synthase; ARG6, acetylglutamate kinase; ARG5, N-acetyl-γ-glutamyl-phosphate reductase; ARG8, acetylornithine aminotransferase; ECM40, acetylornithine acetyltransferase; ARG1, argininosuccinate synthetase; ARG3, ornithine carbamoyltransferase; ARG4, argininosuccinate lyase; CAR1, arginase; CAR2, ornithine aminotransferase.A multitude of putative applications for CGP derivatives are available (29, 41, 45, 47), thus indicating a need for efficient biotechnological production and for further investigations concerning the synthesis of CGP with alternative properties and different constituents. It is not only the putative application of the polymer as a precursor for poly(aspartic acid), which is used as biodegradable alternative for poly(acrylic acid) or for bulk chemicals, that makes CGP interesting (29, 45-47). In addition, a recently developed process for the production of dipeptides from CGP as a precursor makes the synthesis of CGP variants worthwhile (43). Dipeptides play an important role in medicine and pharmacy, e.g., as additives for malnourished patients, as treatments against liver diseases, or as aids for muscle proliferation (43). Because dipeptides are synthesized chemically (40) or enzymatically (6), novel biotechnological production processes are welcome.     

Role of Conserved Cysteines in the Alphavirus E3 Protein

Alphavirus particles are covered by 80 glycoprotein spikes that are essential for viral entry. Spikes consist of the E2 receptor binding protein and the E1 fusion protein. Spike assembly occurs in the endoplasmic reticulum, where E1 associates with pE2, a precursor containing E3 and E2 proteins. E3 is a small, cysteine-rich, extracellular glycoprotein that mediates proper folding of pE2 and its subsequent association with E1. In addition, cleavage of E3 from the assembled spike is required to make the virus particles efficiently fusion competent. We have found that the E3 protein in Sindbis virus contains one disulfide bond between residues Cys19 and Cys25. Replacing either of these two critical cysteines resulted in mutants with attenuated titers. Replacing both cysteines with either alanine or serine resulted in double mutants that were lethal. Insertion of additional cysteines based on E3 proteins from other alphaviruses resulted in either sequential or nested disulfide bond patterns. E3 sequences that formed sequential disulfides yielded virus with near-wild-type titers, while those that contained nested disulfide bonds had attenuated activity. Our data indicate that the role of the cysteine residues in E3 is not primarily structural. We hypothesize that E3 has an enzymatic or functional role in virus assembly, and these possibilities are further discussed.Alphaviruses are members of the Togaviradae family and are single-stranded, positive-sense RNA, enveloped viruses (17). The lipid membranes of the viruses have 80 glycoprotein spikes which are required for viral entry. Each spike is comprised of three copies of a heterodimer which consists of the E2 and E1 proteins (22, 54). E2 and E1 are glycoproteins with a single transmembrane helix that traverses the host-derived lipid bilayer. E2 interacts with the nucleocapsid core at the C terminus (12, 16, 27, 43) and contains the receptor binding site at the N terminus (5, 21, 45). E1 is the viral fusion protein responsible for mediating fusion between the virus membrane and the host cell membrane during an infection (13, 39, 47). Specific interactions in both the ectodomain and transmembrane regions are critical for heterodimer formation (30, 35, 46, 54). The assembly of each heterodimer, its subsequent assembly into a spike, and the interaction of the cytoplasmic tail of the spike with the nucleocapsid core are all essential for the efficient production of infectious particles.Glycoprotein spike assembly requires four structural proteins, E3, E2, 6K, and E1, which are expressed as a single polyprotein. E3 is a small, 64-amino-acid protein (Sindbis virus [SINV] numbering) and contains a signal sequence that translocates the protein into the endoplasmic reticulum (ER) (3, 4, 15). Early in translation, glycosylation of N14 (SINV numbering) occurs and this promotes E3''s release from the ER membrane into the lumen. As a result, the signal sequence is not cleaved from the E3 protein (14). Cellular enzymes cleave the polyprotein to yield pE2 (an uncleaved protein consisting of E3 and E2), 6K, and E1 (23, 55) proteins. In the ER, E1 is found in several conformations, only one of which will form a functional heterodimer with pE2, allowing its transport to the Golgi apparatus (1, 2, 6, 7, 36). After pE2-E1 heterodimerization, self-association between three heterodimers occurs and each individual spike is formed (25, 26, 36). As observed with Semliki Forest virus, disulfide bonds reshuffle within pE2 during protein folding (34), possibly forming intermolecular disulfide bonds between E3 and E2 residues. However, no intermolecular disulfide bonds between pE2 and E1 have been identified (34). Once the viral spikes have been assembled, they are transported to the plasma membrane (11) and are thus exposed to subcellular changes of pH, from pH 7.2 in the ER to pH 5.7 in the vesicles constitutively transporting the spikes to the plasma membrane. In the trans-Golgi network, the E3 protein is cleaved from pE2 by the cellular protein furin (18, 44, 55). E3 remains noncovalently attached to the released virus particle, while in other species E3 is found in the medium of virus-infected cells (32, 49).E3 is required for efficient particle assembly, both in mediating spike folding and in spike activation for viral entry. When an ER signal sequence was substituted for the E3 protein, heterodimerization of pE2 and E1 was abolished (26). Furthermore, when E2 and E1 were expressed individually, low levels of E2 were transported to the cell surface while E1 remained in the ER, suggesting that heterodimerization with pE2 is necessary for E1 to be transported to the cell surface (24, 26, 46). These results are consistent with E3 playing a critical role in mediating the folding of pE2 and the association of pE2 and E1 proteins during spike assembly (7, 38). In viruses where the furin cleavage site was mutated, the virus particles were correctly assembled but severely reduced in infectivity, presumably because the fusion protein was unable to dissociate from pE2 and initiate fusion (44, 55).A comparison of an amino acid sequence alignment of E3 proteins from different alphaviruses (Fig. ​(Fig.1)1) shows that the E3 protein is a small protein with four conserved cysteine (Cys) residues. A subset of E3 proteins contains an additional two Cys residues in a narrow cysteine/proline-rich region, PPCXPCC (Fig. ​(Fig.1).1). We have purified recombinant E3 protein from SINV and have determined that a disulfide bond is present and, furthermore, that these Cys residues are important in virus assembly. Within the alphavirus E3 proteins, we have identified a region that is important for mediating spike transport to the plasma membrane and thus is critical for spike assembly.Open in a separate windowFIG. 1.E3 amino acid sequence alignment from a representative group of alphaviruses. The cysteines marked with asterisks are conserved in all alphavirus species. The ⋄ indicates the conserved but nonessential glycosylation site. The PPCXPCC motif present in ∼50% of alphaviruses is underlined. SFV, Semliki Forest virus; RRV, Ross River virus; BFV, Barmah Forest virus; EEE, eastern equine encephalitis virus; ONN, O''nyong nyong virus; IGB, Igbo Ora virus; OCK, Ockelbo virus; WEE, western equine encephalitis virus; AUR, Aura virus; VEE, Venezuelan equine encephalitis virus.