Evaluating the bone regeneration in calvarial defect using osteoblasts differentiated from adipose-derived mesenchymal stem cells on three different scaffolds: an animal study

The aim of this study was to investigate the effect of three different scaffolds on the viability and differentiation of adipose-derived mesenchymal stem cells (ADMSCs) to osteoblast for bone regeneration of calvarial defect in rabbit model. Adipose was harvested from the nape of 12 rabbits by direct surgery or hollow-tip cannula. Two standardized circular calvarial defects (case and control), 8 mm in diameter each, were created in all the animals. The animals were divided into 3 different groups. In group 1 (G1), the defect was filled with polyamide + ADMSC. In group 2, poly lactic-co-glycolic acid + ADMSC was used. In group 3, decellularized amniotic membrane + ADMSC was applied. In the control defect, the non-seeded scaffolds were applied for filling the defect. Decellularized pericardial scaffolds were used as a membrane on the scaffolds. The animals were euthanized 2, 4, and 8 weeks of operation and new bone formation was assessed by different analyses. Immunohistochemical (IHC) staining with osteopontin and osteocalcin antibodies was also performed. After 2 weeks of wound healing, minimal bone regeneration was detected in all groups. Almost complete defect closure was observed in all experimental groups after 8 weeks of operation, with the greatest defect closure in the animals treated with polyamide scaffolds as compared to biopsies obtained from control defects and other experimental groups. The maximal tensile load was higher in G1, 4 and 8 weeks postoperatively, suggesting the usefulness of polyamide + ADMSC for bone regeneration in calvarial defects. Results of the IHC staining demonstrated a significant difference between seeded and non-seeded scaffold in both short- and long-term follow-ups (P < 0.05). In addition, a significant difference was observed in enhancement of IHC staining of both markers in polyamide group (seeded or non-seeded) 4 and 8 weeks postoperatively in comparison with other scaffolds. It was concluded that bone regeneration in critical calvarial defect was more successful in seeded polyamide.     

Bioceramic-collagen scaffolds loaded with human adipose-tissue derived stem cells for bone tissue engineering

The combination of bioceramics and stem cells has attracted the interest of research community for bone tissue engineering applications. In the present study, a combination of Bio-Oss^® and type 1 collagen gel as scaffold were loaded with human adipose-tissue derived mesenchymal stem cells (AT-MSCs) after isolation and characterization, and the capacity of them for bone regeneration was investigated in rat critical size defects using digital mammography, multi-slice spiral computed tomography imaging and histological analysis. 8 weeks after implantation, no mortality or sign of inflammation was observed in the site of defect. According to the results of imaging analysis, a higher level of bone regeneration was observed in the rats receiving Bio-Oss^®-Gel compared to untreated group. In addition, MSC-seeded Bio-Oss-Gel induced the highest bone reconstruction among all groups. Histological staining confirmed these findings and impressive osseointegration was observed in MSC-seeded Bio-Oss-Gel compared with Bio-Oss-Gel. On the whole, it was demonstrated that combination of AT-MSCs, Bio-Oss and Gel synergistically enhanced bone regeneration and reconstruction and also could serve as an appropriate structure to bone regenerative medicine and tissue engineering application.     

In-Vivo Efficacy of Compliant 3D Nano-Composite in Critical-Size Bone Defect Repair: a Six Month Preclinical Study in Rabbit

Bone defects above critical size do not heal completely by itself and thus represent major clinical challenge to reconstructive surgery. Numerous bone substitutes have already been used to promote bone regeneration, however their use, particularly for critical-sized bone defects along with their long term in vivo safety and efficacy remains a concern. The present study was designed to obtain a complete healing of critical-size defect made in the proximal tibia of New Zealand White rabbit, using nano-hydroxyapatite/gelatin and chemically carboxymethylated chitin (n-HA/gel/CMC) scaffold construct. The bone-implant interfaces and defect site healing was evaluated for a period up to 25 weeks using radiography, micro-computed tomography, fluorescence labeling, and histology and compared with respective SHAM (empty contra lateral control). The viscoelastic porous scaffold construct allows easy surgical insertion and post-operatively facilitate oxygenation and angiogenesis. Radiography of defect treated with scaffold construct suggested expedited healing at defect edges and within the defect site, unlike confined healing at edges of the SHAM sites. The architecture indices analyzed by micro-computed tomography showed a significant increase in percentage of bone volume fraction, resulted in reconciled cortico-trabecular bone formation at n-HA/gel/CMC constructs treated site (15.2% to 52.7%) when compared with respective SHAM (10.2% to 31.8%). Histological examination and fluorescence labeling revealed that the uniformly interconnected porous surface of scaffold construct enhanced osteoblasts’ activity and mineralization. These preclinical data suggest that, n-HA/gel/CMC construct exhibit stimulation of bone''s innate regenerative capacity, thus underscoring their use in guided bone regeneration.     

Bone defect repair in rat tibia by TGF-β1 and IGF-1 released from hydrogel scaffold

Bone repair is one of the major challenges facing reconstructive surgery. Bone regeneration is needed for the repair of large defects and fractures. The ability of TGF-β1 and IGF-1 incorporated into hydrogel scaffold to induce bone regeneration was evaluated in a rat tibia segmental defect model. External fixation was performed prior to the induction of the segmental bone defect in order to stabilize the defect site. Hydrogel scaffold containing either TGF-β, IGF-1, TGF-β + IGF-1, hydrogel containing saline or saline, were inserted in the defect. Calcified material was observed in the defects treated with TGF-β 2 weeks following the start of treatment. Bone defects treated with TGF-β, IGF-1 or TGF-β + IGF-1 revealed significant bone formation after 4 and 6 weeks when compared to the control specimens. X-ray images showed that solid bone was present at the defect site after 6 weeks of treatment with TGF-β or TGF-β + IGF-1. A less pronounced bone induction was observed in the control specimens and bones treated with IGF-1. Percent closure ratio of bone defects after 6 weeks were 40, 80, 89, and 97% for saline, hydrogel, IGF-1, TGF-β and IGF-1 + TGF-β groups, respectively. It is concluded that hydrogel scaffold can serve as a good osteoconductive matrix for growth factors, and that it provides a site for bone regeneration and enhances bone defect healing and could be used as alternative graft material. This revised version was published online in July 2006 with corrections to the Cover Date.     

The effect of autologous bone marrow stromal cells differentiated on scaffolds for canine tibial bone reconstruction

Bone marrow contains mesenchymal stem cells that form many tissues. Various scaffolds are available for bone reconstruction by tissue engineering. Osteoblastic differentiated bone marrow stromal cells (BMSC) promote osteogenesis on scaffolds and stimulate bone regeneration. We investigated the use of cultured autologous BMSC on different scaffolds for healing defects in tibias of adult male canines. BMSC were isolated from canine humerus bone marrow, differentiated into osteoblasts in culture and loaded onto porous ceramic scaffolds including hydroxyapatite 1, hydroxyapatite gel and calcium phosphate. Osteoblast differentiation was verified by osteonectine and osteocalcine immunocytochemistry. The scaffolds with stromal cells were implanted in the tibial defect. Scaffolds without stromal cells were used as controls. Sections from the defects were processed for histological, ultrastructural, immunohistochemical and histomorphometric analyses to analyze the healing of the defects. BMSC were spread, allowed to proliferate and differentiate to osteoblasts as shown by alizarin red histochemistry, and osteocalcine and osteonectine immunostaining. Scanning electron microscopy showed that BMSC on the scaffolds were more active and adhesive to the calcium phosphate scaffold compared to the others. Macroscopic bone formation was observed in all groups, but scaffolds with stromal cells produced significantly better results. Bone healing occurred earlier and faster with stromal cells on the calcium phosphate scaffold and produced more callus compared to other scaffolds. Tissue healing and osteoblastic marker expression also were better with stromal cells on the scaffolds. Increased trabecula formation, cell density and decreased fibrosis were observed in the calcium phosphate scaffold with stromal cells. Autologous cultured stromal cells on the scaffolds were useful for healing of canine tibial bone defects. The calcium phosphate scaffold was the best for both cell differentiation in vitro and bone regeneration in vivo. It may be possible to improve healing of bone defects in humans using stem cells from bone marrow.     

Combination therapy with BMP-2 and BMSCs enhances bone healing efficacy of PCL scaffold fabricated using the 3D plotting system in a large segmental defect model

The three-dimensional (3D) plotting system is a rapidly-developing scaffold fabrication method for bone tissue engineering. It yields a highly porous and inter-connective structure without the use of cytotoxic solvents. However, the therapeutic effects of a scaffold fabricated using the 3D plotting system in a large segmental defect model have not yet been demonstrated. We have tested two hypotheses: whether the bone healing efficacy of scaffold fabricated using the 3D plotting system would be enhanced by bone marrow-derived mesenchymal stem cell (BMSC) transplantation; and whether the combination of bone morphogenetic protein-2 (BMP-2) administration and BMSC transplantation onto the scaffold would act synergistically to enhance bone regeneration in a large segmental defect model. The use of the combined therapy did increase bone regeneration further as compared to that with monotherapy in large segmental bone defects.     

Nanocomposite scaffold seeded with mesenchymal stem cells for bone repair

The mechanical property of bone tissue scaffolds is one of the most important aspects in bone tissue engineering that has remained problematic. In our previous study, we fabricated a three‐dimensional scaffold from nano‐hydroxyapatite/gelatin (nHA/Gel) and investigated its efficiency in promoting bone regeneration both in vitro and in vivo. In the present study, the effect of adding silicon carbide (SiC) on the mechanical and biological behaviors of the nHA/Gel/SiC and bone regeneration in vivo were determined. nHA and SiC were synthesized and characterized by the X‐ray diffraction pattern and transmission electron microscope image. Layer solvent casting, freeze drying, and lamination techniques were applied to prepare these scaffolds. Then, the biocompatibility and cell adhesion behavior of the synthesized nHA/Gel/SiC scaffolds were investigated. For in vivo studies, rats were categorized into three groups: blank defect, blank scaffold, and rat bone marrow mesenchymal stem cells (rBM‐MSCs)/scaffold. After 1, 4, and 12 weeks post‐injury, the rats were sacrificed and the calvaria were harvested. Sections with a thickness of 5 µm thickness were prepared and stained with hematoxylin–eosin and Masson's Trichrome, and immunohistochemistry was performed. Our results showed that SiC effectively increased the mechanical properties of the nHA/Gel/SiC scaffold. No significant differences were observed in biocompatibility, cell adhesion, and cytotoxicity of the nHA/Gel/SiC in comparison with the nHA/Gel nanocomposite. Based on histological and immunohistochemical studies, both osteogenesis and collagenization were significantly higher in the rBM‐MSCs/scaffold group, quantitatively and qualitatively. The present study strongly suggests the potential of SiC as an alternative strategy to improve the mechanical and biological properties of bone tissue engineering scaffolds, and shows that the pre‐seeded nHA/Gel/SiC scaffold with rBM‐MSCs improves osteogenesis in the engineered bone implant.     

Anterior Cruciate Ligament Reconstruction in a Rabbit Model Using Silk-Collagen Scaffold and Comparison with Autograft

The objective of the present study was to perform an in vivo assessment of a novel silk-collagen scaffold for anterior cruciate ligament (ACL) reconstruction. First, a silk-collagen scaffold was fabricated by combining sericin-extracted knitted silk fibroin mesh and type I collagen to mimic the components of the ligament. Scaffolds were electron-beam sterilized and rolled up to replace the ACL in 20 rabbits in the scaffold group, and autologous semitendinosus tendons were used to reconstruct the ACL in the autograft control group. At 4 and 16 weeks after surgery, grafts were retrieved and analyzed for neoligament regeneration and tendon-bone healing. To evaluate neoligament regeneration, H&E and immunohistochemical staining was performed, and to assess tendon-bone healing, micro-CT, biomechanical test, H&E and Russell-Movat pentachrome staining were performed. Cell infiltration increased over time in the scaffold group, and abundant fibroblast-like cells were found in the core of the scaffold graft at 16 weeks postoperatively. Tenascin-C was strongly positive in newly regenerated tissue at 4 and 16 weeks postoperatively in the scaffold group, similar to observations in the autograft group. Compared with the autograft group, tendon-bone healing was better in the scaffold group with trabecular bone growth into the scaffold. The results indicate that the silk-collagen scaffold has considerable potential for clinical application.     

Effect of bovine fetal growth plate as a new xenograft in experimental bone defect healing: radiological,histopathological and biomechanical evaluation

Bone grafting is used to enhance healing in osteotomies, arthrodesis, and multifragmentary fractures and to replace bony loss resulting from neoplasia or cysts. They are source of osteoprogenitor cells and induce bone formation and provide mechanical support for vascular and bone ingrowth. Autografts are used commonly but quantity of retrieved bone is limit. This study was designed to evaluate autograft and new xenograft (Bovine fetal growth plate) effects on bone healing process. Twenty male White New Zealand rabbits were used in this study. In autograft group the defect was filled by fresh autogenous cortical graft, in xenograft group the defect was filled by a segment of bovine fetal growth plate and was fixed by cercelage wire. Radiological, histopathological and biomechanical evaluations were performed blindly and results scored and analyzed statistically. Statistical tests did not support significant differences between two groups at the 14th and 28th postoperative day radiographically (P > 0.05). There was a significant difference for remodeling at the 42nd postoperative radiologically (P < 0.05). Xenograft was superior to autograft at the 56th postoperative day for radiological bone formation (P < 0.03). Histopathological and biomechanical evaluation revealed no significant differences between two groups. The results of this study indicate that satisfactory healing occurred in rabbit radius defect filled with calf fetal growth plate. Complications were not identified and healing was faster than cortical autogenous grafting. It was concluded that the use of calf fetal growth plate as a new xenograft is an acceptable alternative to cortical autogenous graft and could reduce the morbidity associated with harvesting autogenous graft during surgery.     

In silico Mechano-Chemical Model of Bone Healing for the Regeneration of Critical Defects: The Effect of BMP-2

The healing of bone defects is a challenge for both tissue engineering and modern orthopaedics. This problem has been addressed through the study of scaffold constructs combined with mechanoregulatory theories, disregarding the influence of chemical factors and their respective delivery devices. Of the chemical factors involved in the bone healing process, bone morphogenetic protein-2 (BMP-2) has been identified as one of the most powerful osteoinductive proteins. The aim of this work is to develop and validate a mechano-chemical regulatory model to study the effect of BMP-2 on the healing of large bone defects in silico. We first collected a range of quantitative experimental data from the literature concerning the effects of BMP-2 on cellular activity, specifically proliferation, migration, differentiation, maturation and extracellular matrix production. These data were then used to define a model governed by mechano-chemical stimuli to simulate the healing of large bone defects under the following conditions: natural healing, an empty hydrogel implanted in the defect and a hydrogel soaked with BMP-2 implanted in the defect. For the latter condition, successful defect healing was predicted, in agreement with previous in vivo experiments. Further in vivo comparisons showed the potential of the model, which accurately predicted bone tissue formation during healing, bone tissue distribution across the defect and the quantity of bone inside the defect. The proposed mechano-chemical model also estimated the effect of BMP-2 on cells and the evolution of healing in large bone defects. This novel in silico tool provides valuable insight for bone tissue regeneration strategies.     

Human Adipose Derived Stromal Cells Heal Critical Size Mouse Calvarial Defects

Background

Human adipose-derived stromal cells (hASCs) represent a multipotent cell stromal cell type with proven capacity to differentiate along an osteogenic lineage. This suggests that they may be used to heal defects of the craniofacial or appendicular skeleton. We sought to substantiate the use of undifferentiated hASCs in the regeneration of a non-healing mouse skeletal defect.

Methodology/Principal Findings

Human ASCs were harvested from female lipoaspirate. Critical-sized (4 mm) calvarial defects were created in the parietal bone of adult male nude mice. Defects were either left empty, treated with an apatite coated PLGA scaffold alone, or a scaffold with human ASCs. MicroCT scans were obtained at stratified time points post-injury. Histology, in situ hybridization, and histomorphometry were performed. Near complete healing was observed among hASC engrafted calvarial defects. This was in comparison to control groups that showed little healing (*P<0.01). Human ASCs once engrafted differentiate down an osteogenic lineage, determined by qRT-PCR and histological co-expression assays using GFP labeled cells. ASCs were shown to persist within a defect site for two weeks (shown by sex chromosome analysis and quantified using Luciferase+ ASCs). Finally, rBMP-2 was observed to increase hASC osteogenesis in vitro and osseous healing in vivo.

Conclusions/Significance

Human ASCs ossify critical sized mouse calvarial defects without the need for pre-differentiation. Recombinant differentiation factors such as BMP-2 may be used to supplement hASC mediated repair. Interestingly, ASC presence gradually dissipates from the calvarial defect site. This study supports the potential translation for ASC use in the treatment of human skeletal defects.     

Novel application of stem cell-derived factors for periodontal regeneration

The effect of conditioned medium from cultured mesenchymal stem cells (MSC-CM) on periodontal regeneration was evaluated. In vitro, MSC-CM stimulated migration and proliferation of dog MSCs (dMSCs) and dog periodontal ligament cells (dPDLCs). Cytokines such as insulin-like growth factor, vascular endothelial growth factor, transforming growth factor-β1, and hepatocyte growth factor were detected in MSC-CM. In vivo, one-wall critical-size, intrabony periodontal defects were surgically created in the mandible of dogs. Dogs with these defects were divided into three groups that received MSC-CM, PBS, or no implants. Absorbable atelo-collagen sponges (TERUPLUG®) were used as a scaffold material. Based on radiographic and histological observation 4 weeks after transplantation, the defect sites in the MSC-CM group displayed significantly greater alveolar bone and cementum regeneration than the other groups. These findings suggest that MSC-CM enhanced periodontal regeneration due to multiple cytokines contained in MSC-CM.     

Transitory improvement of articular cartilage characteristics after implantation of polylactide:polyglycolic acid (PLGA) scaffolds seeded with autologous mesenchymal stromal cells in a sheep model of critical-sized chondral defect

Clinical translation of emerging technologies aiming at cartilage resurfacing is hindered by neither the appropriate scaffold design nor the optimal cell source having been defined. Here, critical-sized, chondral-only focal defects were created in sheep and treated with clinical-grade, co-polymeric poly-lactide:polyglycolic acid scaffolds either alone or seeded with 3.3 × 10⁶ ± 0.4 × 10⁶ autologous bone marrow-derived mesenchymal stromal cells and studied over 12 month follow-up. An untreated group was included for comparison. Second-look arthroscopy performed at 4 months post-treatment evidenced the generation of neocartilage of better quality in those defects treated with cells. However, macroscopic scores in the cell-treated group declined significantly from 7.5 ± 2.3 at 4 months to 3.1 ± 2.6 (p = 0.0098) at 12 months post-treatment, whereas the other two experimental groups remained unaltered during 4–12 month post-treatment. The effectiveness of the cell-based approach proposed in this study is thus restricted to between months 1 and 4 post-treatment.     

The Masquelet Technique for Membrane Induction and the Healing of Ovine Critical Sized Segmental Defects

The healing of critical sized segmental defects is an ongoing clinical problem. No method has achieved pre-eminence. The Masquelet technique is a relatively new innovation involving the induction of a fibrous tissue membrane around the bone defect site taking advantage of the body’s foreign body reaction to the presence of a polymethylmethacrylate (PMMA) spacer. The aim of this study was to investigate the properties and characteristics of this induced membrane and its effectiveness when used in conjunction with allograft or an allograft/autograft mix as filler materials in an ovine critical sized defect model. The resultant induced membrane was found to be effective in containing the graft materials in situ. It was demonstrated to be an organised pseudosynovial membrane which expressed bone morphogenic protein 2 (BMP2), transforming growth factor- beta (TGFβ), vascular endothelial growth factor (VEGF), von Willerbrand factor (vWF), interleukin 6 (IL-6) and interleukin 8 (IL-8). While more new bone growth was evident in the test groups compared to the controls animals at 12 weeks, the volumes were not statistically different and no defects were fully bridged. Of the two graft material groups, the allograft/autograft mix was shown to have a more rapid graft resorption rate than the allograft only group. While the Masquelet technique proved effective in producing a membrane to enclose graft materials, its ability to assist in the healing of critical sized segmental defects when compared to empty controls remained inconclusive.     

Histochemical examination of systemic administration of eldecalcitol combined with guided bone regeneration for bone defect restoration in rats

The aim of this experiment was to elucidate the histological alterations after systemic administration of eldecalcitol (ELD) combined with guided bone regeneration during the restoration of bone defect healing in rats. The femurs of 8-week-old Wister rats were used to generate bone defect models. The defect was covered with a collagen membrane, and ELD group was administrated with eldecalcitol (50 ng/kg body weight) intragastrically once every other day. Femora were harvested at 1, 2, 4 and 8 weeks post-surgery. Decalcify tissue slices were made and used for histological and immunohistochemical examination. Bone biomarkers of RANKL, OPG and osteocalcin (OCN) were detected by western blot. The results revealed that the system administration of ELD could improve new bone formation demonstrated by the increased bone volume/tissue volume ratio and accelerated mineralization. ELD suppressed osteoclastic bone resorption by reducing the number of osteoclasts, decreasing the expression of cathepsin-K and the ratio of RANKL/OPG at the early stage of bone defect restoration (1 and 2 weeks) and upregulating OCN expression at the later stage of bone defect healing (4 and 8 weeks). These data suggested that systemic administration of eldecalcitol accelerated bone formation and promoted bone maturation by decreasing bone resorption and promoting bone mineralization during bone defect restoration.     

Repair of Segmental Bone Defect Using Totally Vitalized Tissue Engineered Bone Graft by a Combined Perfusion Seeding and Culture System

Background

The basic strategy to construct tissue engineered bone graft (TEBG) is to combine osteoblastic cells with three dimensional (3D) scaffold. Based on this strategy, we proposed the “Totally Vitalized TEBG” (TV-TEBG) which was characterized by abundant and homogenously distributed cells with enhanced cell proliferation and differentiation and further investigated its biological performance in repairing segmental bone defect.

Methods

In this study, we constructed the TV-TEBG with the combination of customized flow perfusion seeding/culture system and β-tricalcium phosphate (β-TCP) scaffold fabricated by Rapid Prototyping (RP) technique. We systemically compared three kinds of TEBG constructed by perfusion seeding and perfusion culture (PSPC) method, static seeding and perfusion culture (SSPC) method, and static seeding and static culture (SSSC) method for their in vitro performance and bone defect healing efficacy with a rabbit model.

Results

Our study has demonstrated that TEBG constructed by PSPC method exhibited better biological properties with higher daily D-glucose consumption, increased cell proliferation and differentiation, and better cell distribution, indicating the successful construction of TV-TEBG. After implanted into rabbit radius defects for 12 weeks, PSPC group exerted higher X-ray score close to autograft, much greater mechanical property evidenced by the biomechanical testing and significantly higher new bone formation as shown by histological analysis compared with the other two groups, and eventually obtained favorable healing efficacy of the segmental bone defect that was the closest to autograft transplantation.

Conclusion

This study demonstrated the feasibility of TV-TEBG construction with combination of perfusion seeding, perfusion culture and RP technique which exerted excellent biological properties. The application of TV-TEBG may become a preferred candidate for segmental bone defect repair in orthopedic and maxillofacial fields.     

Fresh cortical autograft versus fresh cortical allograft effects on experimental bone healing in rabbits: radiological, Histopathological and Biomechanical evaluation

Bone grafting is used to enhance healing in osteotomies, arthrodesis, and multifragmentary fractures and to replace bony loss resulting from neoplasia or cysts. They are source of osteoprogenitor cells and induce bone formation and provide mechanical support for vascular and bone ingrowth. Autografts are used commonly but quantity of harvested bone is limit. This study was designed to evaluate fresh cortical autograft and allograft effects on bone healing process. Twenty male White New Zealand rabbits were used in this study. In autograft group the defect was filled by fresh autogenous cortical graft, in allograft group the defect was filled by a segment of fresh allogenous cortical bone which was harvested at the time of surgery during the creation of radius bone defect. Then all surface soft tissue, such as muscle attachments, were removed from the harvested bone and changed between rabbits as a fresh allogenous cortical bone graft and was fixed by cercelage wire. Radiological, histopathological and biomechanical evaluations were performed blindly and results scored and analyzed statistically. Statistical tests did not support significant differences between two groups at the 14th and 56th postoperative day radiographically (P > 0.05). There was a significant difference radiologically for the 28th and the 42nd postoperative (P < 0.05). Autograft was superior to allograft at the 28th and 42nd postoperative day in radiological evaluation (P < 0.03). Histopathological and biomechanical evaluation revealed no significant differences between two groups.     

Composite hyaluronate-type I collagen-fibrin scaffold in the therapy of osteochondral defects in miniature pigs

The potential of novel scaffold containing sodium hyaluronate, type I collagen, and fibrin was investigated in the regeneration of osteochondral defects in miniature pigs. Both autologous chondrocyte-seeded scaffolds and non-seeded scaffolds were implanted into two defects located in the non-weight-bearing zone of the femoral trochlea (defect A was located more distally and medially, defect B was located more proximally and laterally). Control defects were left untreated. Twelve weeks after the operation, the knees were evaluated in vivo using MRI. Six months after the implantation, the defects were analyzed using MRI, histological, and immunohistochemical analysis. In the A defects of chondrocyte-seeded scaffold group, hyaline cartilage and fibrocartilage was formed, containing type II collagen, acidic and neutral glycosaminoglycans while the non-seeded scaffold group was predominantly filled with fibrocartilage. Defects in the control group were predominantly filled with fibrous tissue. Histomorphometric analysis of photomicrographs revealed a significantly higher amount of hyaline cartilage in the cell-seeded scaffold group in A defects than in other groups. Both scaffold groups in A defects showed significantly less fibrous tissue than cell-seeded defects B and the control group. Both histological and MRI analysis proved that the novel composite scaffold has a potential to regenerate osteochondral defects within six months.     

Biomimetic tubular nanofiber mesh and platelet rich plasma-mediated delivery of BMP-7 for large bone defect regeneration

There is a growing need for successful bone tissue engineering strategies and advanced biomaterials that mimic the structure and function of native tissues carry great promise. Successful bone repair approaches may include an osteoconductive scaffold, osteoinductive growth factors, cells with an osteogenic potential and capacity for graft vascularisation. To increase osteoinductivity of biomaterials, the local combination and delivery of growth factors has been developed. In the present study we investigated the osteogenic effects of calcium phosphate (CaP)-coated nanofiber mesh tube-mediated delivery of BMP-7 from a PRP matrix for the regeneration of critical sized segmental bone defects in a small animal model. Bilateral full-thickness diaphyseal segmental defects were created in twelve male Lewis rats and nanofiber mesh tubes were placed around the defect. Defects received either treatment with a CaP-coated nanofiber mesh tube (n?=?6), an un-coated nanofiber mesh tube (n=6) a CaP-coated nanofiber mesh tube with PRP (n=6) or a CaP-coated nanofiber mesh tube in combination with 5?μg?BMP-7 and PRP (n?=?6). After 12?weeks, bone volume and biomechanical properties were evaluated using radiography, microCT, biomechanical testing and histology. The results demonstrated significantly higher biomechanical properties and bone volume for the BMP group compared to the control groups. These results were supported by the histological evaluations, where BMP group showed the highest rate of bone regeneration within the defect. In conclusion, BMP-7 delivery via PRP enhanced functional bone defect regeneration, and together these data support the use of BMP-7 in the treatment of critical sized defects.     

Bone regeneration potential of allogeneic or autogeneic mesenchymal stem cells loaded onto cancellous bone granules in a rabbit radial defect model

For developing a clinically effective bone regeneration strategy, we compare the bone regeneration potential of cultured allogeneic bone marrow-derived mesenchymal stem cells (BM-MSCs) and of autologous BM-MSCs loaded onto allogeneic cancellous bone granule scaffolds. A critical-sized segmental bone defect was made at the mid-shaft of both radiuses in 19 New Zealand White rabbits (NWRs). In the experimental group, allogeneic BM-MSCs loaded onto small-sized allogeneic cancellous bone granules (300~700 um in diameter) were implanted in one side of a bone defect. In the control group, autologous BM-MSCs loaded onto allogeneic cancellous granules were grafted in the other side. Bone regeneration was assessed by radiographic evaluation at 4, 8, 12 and 16 weeks post-implantation and by micro-computed tomography (micro-CT) and histological evaluation at 8 and 16 weeks. The experimental groups showed lower bone quantity indices (BQIs) than the control groups at 12 and 16 weeks (p?<?0.05), although no significant difference was observed at 4 and 8 weeks (p?>?0.05). Micro-CT analysis revealed that both groups had similar mean total bone volume and other parameters including trabecular thickness, number and separation at either 8 or 16 weeks. Only bone surface area revealed less area in the experimental group at 16 weeks. Histological evaluation of 8-week and 16-week specimens showed similar biologic processes of new bone formation and maturation. There was no inflammatory reaction indicating an adverse immune response in both allogeneic and autologous MSC groups. In conclusion, allogeneic BM-MSCs loaded onto allogeneic cancellous bone granules had comparable bone regeneration potential to autologous BM-MSCs in a rabbit radial defect model.