3D Hyperbranched Hollow Carbon Nanorod Architectures for High‐Performance Lithium‐Sulfur Batteries

Lithium‐sulfur batteries have been plagued for a long time by low Coulombic efficiency, fast capacity loss, and poor high rate performance. Here, the synthesis of 3D hyperbranched hollow carbon nanorod encapsulated sulfur nanocomposites as cathode materials for lithium‐sulfur batteries is reported. The sulfur nanocomposite cathodes deliver a high specific capacity of 1378 mAh g^‐1 at a 0.1C current rate and exhibit stable cycling performance. The as‐prepared sulfur nanocomposites also achieve excellent high rate capacities and cyclability, such as 990 mAh g^‐1 at 1C, 861 mAh g^‐1 at 5C, and 663 mAh g^‐1 at 10C, extending to more than 500 cycles. The superior electrochemical performance are ascribed to the unique 3D hyperbranched hollow carbon nanorod architectures and high length/radius aspect ratio of the carbon nanorods, which can effectively prevent the dissolution of polysulfides, decrease self‐discharge, and confine the volume expansion on cycling. High capacity, excellent high‐rate performance, and long cycle life render the as‐developed sulfur/carbon nanorod nanocomposites a promising cathode material for lithium‐sulfur batteries.     

Separator Modified by Cobalt‐Embedded Carbon Nanosheets Enabling Chemisorption and Catalytic Effects of Polysulfides for High‐Energy‐Density Lithium‐Sulfur Batteries

Lithium‐sulfur (Li‐S) batteries are considered to be one of the promising next‐generation energy storage systems. Considerable progress has been achieved in sulfur composite cathodes, but high cycling stability and discharging capacity at the expense of volumetric capacity have offset their advantages. Herein, a functional separator is presented by coating cobalt‐embedded nitrogen‐doped porous carbon nanosheets and graphene on one surface of a commercial polypropylene separator. The coating layer not only suppresses the polysulfide shuttle effect through chemical affinity, but also functions as an electrocatalyst to propel catalytic conversion of intercepted polysulfides. The slurry‐bladed carbon nanotubes/sulfur cathode with 90 wt% sulfur deliver high reversible capacity of 1103 mA h g^?1 and volumetric capacity of 1062 mA h cm^?3 at 0.2 C, and the freestanding carbon nanofibers/sulfur cathode provides a high discharging capacity of 1190 mA h g^?1 and volumetric capacity of 1136 mA h cm^?3 at high sulfur content of 78 wt% and sulfur loading of 10.5 mg cm^?2. The electrochemical performance is comparable with or even superior to those in the state‐of‐the‐art carbon‐based sulfur cathodes. The separator reported in this work holds great promise for the development of high‐energy‐density Li‐S batteries.     

Freestanding and Sandwich‐Structured Electrode Material with High Areal Mass Loading for Long‐Life Lithium–Sulfur Batteries

Freestanding cathode materials with sandwich‐structured characteristic are synthesized for high‐performance lithium–sulfur battery. Sulfur is impregnated in nitrogen‐doped graphene and constructed as primary active material, which is further welded in the carbon nanotube/nanofibrillated cellulose (CNT/NFC) framework. Interconnected CNT/NFC layers on both sides of active layer are uniquely synthesized to entrap polysulfide species and supply efficient electron transport. The 3D composite network creates a hierarchical architecture with outstanding electrical and mechanical properties. Synergistic effects generated from physical and chemical interaction could effectively alleviate the dissolution and shuttling of the polysulfide ions. Theoretical calculations reveal the hydroxyl functionization exhibits a strong chemical binding with the discharge product (i.e., Li₂S). Electrochemical measurements suggest that the rationally designed structure endows the electrode with high specific capacity and excellent rate performance. Specifically, the electrode with high areal sulfur loading of 8.1 mg cm^?2 exhibits an areal capacity of ≈8 mA h cm^?2 and an ultralow capacity fading of 0.067% per cycle over 1000 discharge/charge cycles at C/2 rate, while the average coulombic efficiency is around 97.3%, indicating good electrochemical reversibility. This novel and low‐cost fabrication procedure is readily scalable and provides a promising avenue for potential industrial applications.     

Highly Stable Lithium–Sulfur Batteries Based on Laponite Nanosheet‐Coated Celgard Separators

Lithium–sulfur (Li–S) batteries are of great interest due to their high theoretical energy density. However, one of the key issues hindering their real world applications is polysulfide shuttle, which results in severe capacity decay and self‐discharge. Here, a laponite nanosheets/carbon black coated Celgard (LNS/CB‐Celgard) separator to inhibit polysulfide shuttle and to enhance the Li⁺ conductivity simultaneously is reported. The polysulfide shuttle is efficiently inhibited through strong interactions between the O active sites of the LNS and polysulfides by forming the Li···O and O? S bonds. Moreover, the separator features high Li⁺ conductivity, fast Li⁺ diffusion, excellent electrolyte wettability, and high thermal stability. Consequently, the Li–S batteries with the LNS/CB‐Celgard separator and the pure S cathode show a high initial reversible capacity of 1387 mA h g^?1 at 0.1 C, high rate performance, superior cycling stability (with a capacity decay rate of 0.06% cycle^?1 at 0.2 C and 0.028% cycle^?1 at 1.0 C over 500 cycles), and ultralow self‐discharge. The separator could also enhance the performance of other batteries such as the LiFePO₄/separator/Li battery. This work sheds a new light on the design and preparation of novel separators for highly stable Li–S batteries via a “green” and cost‐effective approach.     

Mesoporous TiO2‐Sn/C Core‐Shell Nanowire Arrays as High‐Performance 3D Anodes for Li‐Ion Batteries

Three‐dimensional mesoporous TiO₂‐Sn/C core‐shell nanowire arrays are prepared on Ti foil as anodes for lithium‐ion batteries. Sn formed by a reduction of SnO₂ is encapsulated into TiO₂ nanowires and the carbon layer is coated onto it. For additive‐free, self‐supported anodes in Li‐ion batteries, this unique core‐shell composite structure can effectively buffer the volume change, suppress cracking, and improve the conductivity of the electrode during the discharge‐charge process, thus resulting in superior rate capability and excellent long‐term cycling stability. Specifically, the TiO₂‐Sn/C nanowire arrays display rechargeable discharge capacities of 769, 663, 365, 193, and 90 mA h g^?1 at 0.1C, 0.5C, 2C 10C, and 30C, respectively (1C = 335 mA g^?1). Furthermore, the TiO₂‐Sn/C nanowire arrays exhibit a capacity retention rate of 84.8% with a discharge capacity of over 160 mA h g^?1, even after 100 cycles at a high current rate of 10C.     

Elastic,Conductive Coating Layer for Self‐Standing Sulfur Cathode Achieving Long Lifespan Li–S Batteries

The shuttle of polysulfide and severe volume change of sulfur cathodes, are the bottlenecks in the practical application of lithium–sulfur batteries, and need to be solved through further exploration of simple and scalable strategies. Herein, an elastic and conductive coating layer is designed and synthesized, by combining water soluble conducting polymer modified carbon nanotubes (PASANTs) with crosslinked waterborne polyurethane (cWPU). It shows high electronic conductivity and excellent resilience. As a result, a lithium–sulfur battery with cWPU/PASANTs coated cathode is able to achieve an outstanding cycle stability with a capacity of 70.8% after 500 cycles at 0.5C and an excellent rate performance (specific capacity of 1130 mAh g^?1 at 0.1C and maintain 68.2% at 2C). This work embodies a systematic design concept, which shows the application prospects of large‐scale production, and is expected to be further applied to other easily pulverized high‐specific‐capacity materials such as silicon and tin.     

High Capacity All‐Solid‐State Lithium Batteries Enabled by Pyrite‐Sulfur Composites

As the theoretical limit of intercalation material‐based lithium‐ion batteries is approached, alternative chemistries based on conversion reactions are presently considered. The conversion of sulfur is particularly appealing as it is associated with a theoretical gravimetric energy density up to 2510 Wh kg^?1. In this paper, three different carbon‐iron disulfide‐sulfur (C‐FeS₂‐S) composites are proposed as alternative positive electrode materials for all‐solid‐state lithium‐sulfur batteries. These are synthesized through a facile, low‐cost, single‐step ball‐milling procedure. It is found that the crystalline structure (evaluated by X‐ray diffraction) and the morphology of the composites (evaluated by scanning electron microscopy) are greatly influenced by the FeS₂:S ratio. Li/LiI‐Li₃PS₄/C‐FeS₂‐S solid‐state cells are tested under galvanostatic conditions, while differential capacity plots are used to discuss the peculiar electrochemical features of these novel materials. These cells deliver capacities as high as 1200 mAh g_(FeS2+S)^?1 at the intermediate loading of 1 mg cm^?2 (1.2 mAh cm^?2), and up to 3.55 mAh cm^?2 for active material loadings as high as 5 mg cm^?2 at 20 °C. Such an excellent performance, rarely reported for (sulfur/metal sulfide)‐based, all solid‐state cells, makes these composites highly promising for real application where high positive electrode loadings are required.     

Facile Synthesis of Crumpled Nitrogen‐Doped MXene Nanosheets as a New Sulfur Host for Lithium–Sulfur Batteries

Crumpled nitrogen‐doped MXene nanosheets with strong physical and chemical coadsorption of polysulfides are synthesized by a novel one‐step approach and then utilized as a new sulfur host for lithium–sulfur batteries. The nitrogen‐doping strategy enables introduction of heteroatoms into MXene nanosheets and simultaneously induces a well‐defined porous structure, high surface area, and large pore volume. The as‐prepared nitrogen‐doped MXene nanosheets have a strong capability of physical and chemical dual‐adsorption for polysulfides and achieve a high areal sulfur loading of 5.1 mg cm^–2. Lithium–sulfur batteries, based on crumpled nitrogen‐doped MXene nanosheets/sulfur composites, demonstrate outstanding electrochemical performances, including a high reversible capacity (1144 mA h g^–1 at 0.2C rate) and an extended cycling stability (610 mA h g^–1 at 2C after 1000 cycles).     

Revisiting the Role of Conductivity and Polarity of Host Materials for Long‐Life Lithium–Sulfur Battery

Despite their high theoretical energy density and low cost, lithium–sulfur batteries (LSBs) suffer from poor cycle life and low energy efficiency owing to the polysulfides shuttle and the electronic insulating nature of sulfur. Conductivity and polarity are two critical parameters for the search of optimal sulfur host materials. However, their role in immobilizing polysulfides and enhancing redox kinetics for long‐life LSBs are not fully understood. This work has conducted an evaluation on the role of polarity over conductivity by using a polar but nonconductive platelet ordered mesoporous silica (pOMS) and its replica platelet ordered mesoporous carbon (pOMC), which is conductive but nonpolar. It is found that the polar pOMS/S cathode with a sulfur mass fraction of 80 wt% demonstrates outstanding long‐term cycle stability for 2000 cycles even at a high current density of 2C. Furthermore, the pOMS/S cathode with a high sulfur loading of 6.5 mg cm^?2 illustrates high areal and volumetric capacities with high capacity retention. Complementary physical and electrochemical probes clearly show that surface polarity and structure are more dominant factors for sulfur utilization efficiency and long‐life, while the conductivity can be compensated by the conductive agent involved as a required electrode material during electrode preparation. The present findings shed new light on the design principles of sulfur hosts towards long‐life and highly efficient LSBs.     

A Li2S‐TiS2‐Electrolyte Composite for Stable Li2S‐Based Lithium–Sulfur Batteries

Li₂S is a fully lithiated sulfur‐based cathode with a high theoretical capacity of 1166 mAh g^?1 that can be coupled with lithium‐free anodes to develop high‐energy‐density lithium–sulfur batteries. Although various approaches have been pursued to obtain a high‐performance Li₂S cathode, there are still formidable challenges with it (e.g., low conductivity, high overpotential, and irreversible polysulfide diffusion) and associated fabrication processes (e.g., insufficient Li₂S, excess electrolyte, and low reversible capacity), which have prevented the realization of high electrochemical utilization and stability. Here, a new cathode design composed of a homogeneous Li₂S‐TiS₂‐electrolyte composite that is prepared by a simple two‐step dry/wet‐mixing process is demonstrated, allowing the liquid electrolyte to wet the powder mixture consisting of insulating Li₂S and conductive TiS₂. The close‐contact, three‐phase boundary of this system improves the Li₂S‐activation efficiency and provides fast redox‐reaction kinetics, enabling the Li₂S‐TiS₂‐electrolyte cathode to attain stable cyclability at C/7 to C/3 rates, superior long‐term cyclability over 500 cycles, and promising high‐rate performance up to 1C rate. More importantly, this improved performance results from a cell design attaining a high Li₂S loading of 6 mg cm^?2, a high Li₂S content of 75 wt%, and a low electrolyte/Li₂S ratio of 6.     

3D Ferroconcrete‐Like Aminated Carbon Nanotubes Network Anchoring Sulfur for Advanced Lithium–Sulfur Battery

To address the serious capacity fading in lithium–sulfur batteries, a 3D ferroconcrete‐like aminated carbon nanotubes network with polyaniline coating as an effective sulfur host to contain polysulfide dissolution is presented here. In this composite, the cross‐linked aminated carbon nanotubes framework provides a fast charge transport pathway and enhancement in the reaction kinetics of the active material to greatly improve the rate capability and sulfur utilization. The ethylenediamine moieties provide strong adhesion of polar discharge products to nonpolar carbon surfaces and thus efficiently prevent polysulfide dissolution to improve the cycle stability, confirmed by density functional theory calculations. The outside polyaniline layers structurally restrain polysulfides to prevent the shuttle effect and active material loss. Benefiting from these advantages, the synthesized composite exhibits a high initial capacity of 1215 mAh g^?1 and a capacity of 975 mAh g^?1 after 200 cycles at 0.2 C. Even after 200 cycles at 0.5 C, a capacity of 735 mAh g^?1 can be maintained, among the best performance reported. The strategy in this work can shed some light on modifying nonpolar carbon surfaces via the amination process to chemically attach sulfur species for high‐performance lithium–sulfur batteries.     

Exploring Advanced Sandwiched Arrays by Vertical Graphene and N‐Doped Carbon for Enhanced Sodium Storage

Smart hybridization of active materials into tailored electrode structure is highly important for developing advanced electrochemical energy storage devices. With the help of sandwiched design, herein a powerful strategy is developed to fabricate three‐layer sandwiched composite core/shell arrays via combined hydrothermal and polymerization approaches. In such a unique architecture, wrinkled MoSe₂ nanosheets are sandwiched by vertical graphene (VG) core and N‐doped carbon (N‐C) shell forming sandwiched core/shell arrays. Interesting advantages including high electrical conductivity, strong mechanical stability, and large porosity are combined in the self‐supported VG/MoSe₂/N‐C sandwiched arrays. As a preliminary test, the sodium ion storage properties of VG/MoSe₂/N‐C sandwiched arrays are characterized and demonstrated with high capacity (540 mA h g^?1), enhanced high rate capability, and long‐term cycling stability (298 mA h g^?1 at 2.0 A g^?1 after 1000 cycles). The sandwiched core/shell structure plays positive roles in the enhancement of electrochemical performances due to dual conductive carbon networks, good volume accommodation, and highly porous structure with fast ion diffusion. The directional electrode design protocol provides a general method for synthesis of high‐performance ternary core/shell electrodes.     

Sulfur‐Impregnated,Sandwich‐Type,Hybrid Carbon Nanosheets with Hierarchical Porous Structure for High‐Performance Lithium‐Sulfur Batteries

Sandwich‐type hybrid carbon nanosheets (SCNMM) consisting of graphene and micro/mesoporous carbon layer are fabricated via a double template method using graphene oxide as the shape‐directing agent and SiO₂ nanoparticles as the mesoporous guide. The polypyrrole synthesized in situ on the graphene oxide sheets is used as a carbon precursor. The micro/mesoporous strcutures of the SCNMM are created by a carbonization process followed by HF solution etching and KOH treatment. Sulfur is impregnated into the hybrid carbon nanosheets to generate S@SCNMM composites for the cathode materials in Li‐S secondary batteries. The microstructures and electrochemical performance of the as‐prepared samples are investigated in detail. The hybrid carbon nanosheets, which have a thickness of about 10–25 nm, high surface area of 1588 m² g^?1, and broad pore size distribution of 0.8–6.0 nm, are highly interconnected to form a 3D hierarchical structure. The S@SCNMM sample with the sulfur content of 74 wt% exhibits excellent electrochemical performance, including large reversible capacity, good cycling stability and coulombic efficiency, and good rate capability, which is believed to be due to the structure of hybrid carbon materials with hierarchical porous structure, which have large specific surface area and pore volume.     

Covalent Encapsulation of Sulfur in a MOF‐Derived S,N‐Doped Porous Carbon Host Realized via the Vapor‐Infiltration Method Results in Enhanced Sodium–Sulfur Battery Performance

Practical applications of room temperature sodium–sulfur batteries are still inhibited by the poor conductivity and slow reaction kinetics of sulfur, and dissolution of intermediate polysulfides in the commonly used electrolytes. To address these issues, starting from a novel 3D Zn‐based metal–organic framework with 2,5‐thiophenedicarboxylic acid and 1,4‐bis(pyrid‐4‐yl) benzene as ligands, a S, N‐doped porous carbon host with 3D tubular holes for sulfur storage is fabricated. In contrast to the commonly used melt‐diffusion method to confine sulfur physically, a vapor‐infiltration method is utilized to achieve sulfur/carbon composite with covalent bonds, which can join electrochemical reaction without low voltage activation. A polydopamine derived N‐doped carbon layer is further coated on the composite to confine the high‐temperature‐induced gas‐phase sulfur inside the host. S and N dopants increase the polarity of the carbon host to restrict diffusion of sulfur, and its 3D porous structure provides a large storage area for sulfur. As a result, the obtained composite shows outstanding electrochemical performance with 467 mAh g^?1 (1262 mAh g^?1_(sulfur)) at 0.1 A g^?1, 270 mAh g^?1 (730 mAh g^?1_(sulfur)) after 1000 cycles at 1 A g^?1 and 201 mAh g^?1 (543 mAh g^?1_(sulfur)) at 5.0 A g^?1.     

3D,Mutually Embedded MOF@Carbon Nanotube Hybrid Networks for High‐Performance Lithium‐Sulfur Batteries

Metal‐organic frameworks (MOFs) hybridized with a conductive matrix could potentially serve as a sulfur host for lithium‐sulfur (Li‐S) battery electrodes; so far most of the previously studied hybrid structures are in the powder form or thin compact films. This study reports 3D porous MOF@carbon nanotube (CNT) networks by grafting MOFs with tailored particle size uniformly throughout a CNT sponge skeleton. Growing larger‐size MOF particles to entrap the conductive CNT network yields a mutually embedded structure with high stability, and after sulfur encapsulation, it shows an initial discharge capacity of ≈1380 mA h g^?1 (at 0.1 C) and excellent cycling stability with a very low fading rate. Furthermore, owing to the 3D porous network that is suitable for enhanced sulfur loading, a remarkable areal capacity of ≈11 mA h cm^?2 (at 0.1 C) is obtained, which is much higher than other MOF‐based hybrid electrodes. The mutually embedded MOF@CNTs with simultaneously high specific capacity, areal capacity, and cycling stability represent an advanced candidate for developing high‐performance Li‐S batteries and other energy storage systems.     

Hard Carbon Anodes and Novel Electrolytes for Long‐Cycle‐Life Room Temperature Sodium‐Sulfur Full Cell Batteries

A novel combination of hard carbon anode sodium pre‐loading and a tailored electrolyte is used to prepare room temperature sodium‐sulfur full cell batteries. The electrochemical loading with sodium ions is realized in a specific mixture of diethyl carbonate, ethylene carbonate, and fluoroethylene carbonate electrolyte in order to create a first solid electrolyte interface (SEI) on the anode surface. Combining such anodes with a porous carbon/sulfur composite cathode results in full cells with a significantly decreased polysulfide shuttle when compared to half cells combined with metallic sodium anodes. Further optimization involves the use of Na₂S/P₂S₅ doped tetraethylene glycol dimethyl ether based electrolyte in the full cell for the formation of a second SEI, reducing polysulfide shuttle even further. More importantly, the electrochemical discharge processes in the cell are improved by adding this dissolved complexation agent to the electrolyte. As a result of this combination sodium‐sulfur cells with tailored cathode materials and electrolytes can achieve high discharge capacities up to 980 mAh g^?1_sulfur and 1000 cycles with 200 mAh g^?1_sulfur remaining capacity, at room temperature.     

High‐Performance All‐Solid‐State Lithium–Sulfur Batteries Enabled by Amorphous Sulfur‐Coated Reduced Graphene Oxide Cathodes

Safety and the polysulfide shuttle reaction are two major challenges for liquid electrolyte lithium–sulfur (Li–S) batteries. Although use of solid‐state electrolytes can overcome these two challenges, it also brings new challenges by increasing the interface resistance and stress/strain. In this work, the interface resistance and stress/strain of sulfur cathodes are significantly reduced by conformal coating ≈2 nm sulfur (S) onto reduced graphene oxide (rGO). An Li–S full cell consisting of an rGO@S‐Li₁₀GeP₂S₁₂‐acetylene black (AB) composite cathode is evaluated. At 60 °C, the all‐solid‐state Li–S cell demonstrates a similar electrochemical performance as in liquid organic electrolyte, with high rate capacities of 1525.6, 1384.5, 1336.3, 903.2, 502.6, and 204.7 mA h g^?1 at 0.05, 0.1, 0.5, 1.0, 2.0, and 5.0 C, respectively. It can maintain a high and reversible capacity of 830 mA h g^?1 at 1.0 C for 750 cycles. The uniform distribution of the rGO@S nanocomposite in the Li₁₀GeP₂S₁₂‐AB matrix generates uniform volume changes during lithiation/delithiation, significantly reducing the stress/strain, thus extending the cycle life. Minimization of the stress/strain of solid cells is the key for a long cycle life of all‐solid‐state Li–S batteries.     

Trapping and Redistribution of Hydrophobic Sulfur Sols in Graphene–Polyethyleneimine Networks for Stable Li–S Cathodes

The lithium–sulfur battery is a promising next‐generation rechargeable battery system which promises to be less expensive and potentially fivefold more energy dense than current Li‐ion technologies. This can only be achieved by improving the sulfur utilization in thick, high areal loading cathodes while minimizing capacity fading to realize high practical energy densities and long cycle‐life. This study reports a simple method to fabricate a high capacity, high loading cathode with one of the highest cycle‐stabilities reported. It is demonstrated that sulfur sols formed by crashing dissolved elemental sulfur into water are trapped between graphene oxide sheets when flocculated with polyethyleneimine. Low temperature, hydrothermal treatment produces a conductive, partially covalent composite exhibiting outstanding cycle‐stability. Using this method, sulfur can be uniformly distributed at fractions as high as 75.7 wt%. Electrodes with high areal sulfur loadings (up to ≈5.4 mg cm^?2), prepared using these composites, lead to projected high cell level practical energy densities of 400 Wh kg^?1. The electrodes demonstrate negligible capacity loss over 250 cycles at 0.15 C and only 0.028% capacity loss per cycle over 810 cycles at 0.75 C. Eventual capacity fading is found to be linked to degradation of lithium‐metal anode suggesting that the cathode material remains stable over even more extended cycling.     

Carbon‐Coated Si Nanoparticles Anchored between Reduced Graphene Oxides as an Extremely Reversible Anode Material for High Energy‐Density Li‐Ion Battery

Improving the lithium (Li) storage properties of silicon (Si)‐based anode materials is of great significance for the realization of advanced Li‐ion batteries. The major challenge is to make Si‐based anode materials maintain electronic conduction and structural integrity during cycling. Novel carbon‐coated Si nanoparticles (NPs)/reduced graphene oxides (rGO) composites are synthesized through simple solution mixing and layer‐by‐layer assembly between polydopamine‐coated Si NPs and graphene oxide nanosheets by filtration, followed by a thermal reduction. The anodic properties of this composite demonstrate the potency of the novel hybrid design based on two dimensional materials for extremely reversible energy conversion and storage. A high capacity and an extremely stable cycle life are simultaneously realized with carbon‐coated Si/rGO composite, which has a sandwich structure. The unprecedented electrochemical performance of this composite can be ascribed to the synergistic effect of polydopamine and rGO. The polydopamine layer forms strong hydrogen bonding with rGO through chemical cross‐linking, thus firmly anchoring Si NPs on rGO sheets to prevent the aggregation of Si NPs and their electronic contact loss. Finally, its structural feature with stacked rGO clipping carbon‐coated Si NPs inside it enables to keep the overall electrode highly conductive and mechanically robust, thus maintaining its initial capacity even with extended cycling.     

Dual‐Confined Flexible Sulfur Cathodes Encapsulated in Nitrogen‐Doped Double‐Shelled Hollow Carbon Spheres and Wrapped with Graphene for Li–S Batteries

Batteries with high energy and power densities along with long cycle life and acceptable safety at an affordable cost are critical for large‐scale applications such as electric vehicles and smart grids, but is challenging. Lithium–sulfur (Li‐S) batteries are attractive in this regard due to their high energy density and the abundance of sulfur, but several hurdles such as poor cycle life and inferior sulfur utilization need to be overcome for them to be commercially viable. Li–S cells with high capacity and long cycle life with a dual‐confined flexible cathode configuration by encapsulating sulfur in nitrogen‐doped double‐shelled hollow carbon spheres followed by graphene wrapping are presented here. Sulfur/polysulfides are effectively immobilized in the cathode through physical confinement by the hollow spheres with porous shells and graphene wrapping as well as chemical binding between heteronitrogen atoms and polysulfides. This rationally designed free‐standing nanostructured sulfur cathode provides a well‐built 3D carbon conductive network without requiring binders, enabling a high initial discharge capacity of 1360 mA h g^?1 at a current rate of C/5, excellent rate capability of 600 mA h g^?1 at 2 C rate, and sustainable cycling stability for 200 cycles with nearly 100% Coulombic efficiency, suggesting its great promise for advanced Li–S batteries.