Aqueous synthesis of highly luminescent surface Mn2+‐doped CdTe quantum dots as a potential multimodal agent

Mn²⁺‐doped CdTe quantum dots (QDs) were synthesized directly via a facile surface doping strategy in aqueous solution. The best optical property emerged when the added amount of Mn²⁺ was 5% compared to Cd²⁺ in the CdTe nanoparticles and the reaction temperature was 60 °C. The fluorescence and magnetic properties of the QDs were studied. The as‐prepared Mn²⁺‐doped CdTe QDs have high quantum yield (48.13%) and a narrow distribution with an average diameter of 3.7 nm. The utility of biological imaging was also studied. Depending on the high quantum yield, cells in culture were illuminated and made more distinct from each other compared to results obtained with normal QDs. They also have a prominent longitudinal relaxivity value (r₁ = 4.2 mM^?1s^?1), which could indicate that the Mn²⁺‐doped CdTe QDs can be used as a potential multimodal agent for fluorescence and magnetic resonance imaging. Copyright © 2014 John Wiley & Sons, Ltd.     

Microwave‐assisted aqueous synthesis of new quaternary‐alloyed CdSeTeS quantum dots; and their bioapplications in targeted imaging of cancer cells

In this study, we report for the first time a one‐pot approach for the synthesis of new CdSeTeS quaternary‐alloyed quantum dots (QDs) in aqueous phase by microwave irradiation. CdCl₂ was used as a Cd precursor during synthesis, NaHTe and NaHSe were used as Te and Se precursors and mercaptopropionic acid (MPA) was used as a stabilizer and source of sulfur. A series of quaternary‐alloyed QDs of different sizes were prepared. CdSeTeS QDs exhibited a wide emission range from 549 to 709 nm and high quantum yield (QY) up to 57.7 %. Most importantly, the quaternary‐alloyed QDs possessed significantly long fluorescence lifetimes > 100 ns as well as excellent photostability. Results of high‐resolution transmission electron microscopy (HRTEM), energy dispersive X‐ray spectroscopy (EDX) and powder X‐ray diffraction (XRD) spectroscopy showed that the nanocrystals possessed a quaternary alloy structure with good crystallinity. Fluorescence correlation spectroscopy (FCS) showed that QDs possessed good water solubility and monodispersity in aqueous solution. Furthermore, CdSeTeS QDs were modified with alpha‐thio‐omega‐carboxy poly(ethylene glycol) (HS‐PEG‐COOH) and the modified QDs were linked to anti‐epidermal growth factor receptor (EGFR) antibodies. QDs with the EGFR antibodies as labeling probes were successfully applied to targeted imaging for EGFR on the surface of SiHa cervical cancer cells. We believe that CdSeTeS QDs can become useful probes for in vivo targeted imaging and clinical diagnosis. Copyright © 2012 John Wiley & Sons, Ltd.     

Solid‐phase synthesis of graphene quantum dots from the food additive citric acid under microwave irradiation and their use in live‐cell imaging

The work demonstrated that solid citric acid, one of the most common food additives, can be converted to graphene quantum dots (GQDs) under microwave heating. The as‐prepared GQDs were further characterized by various analytical techniques like transmission electron microscopy, atomic force microscopy, X‐ray diffraction, X–ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, fluorescence and UV‐visible spectroscopy. Cytotoxicity of the GQDs was evaluated using HeLa cells. The result showed that the GQDs almost did not exhibit cytotoxicity at concentrations as high as 1000 µg mL^–1. In addition, it was found that the GQDs showed good solubility, excellent photostability, and excitation‐dependent multicolor photoluminescence. Subsequently, the multicolor GQDs were successfully used as a fluorescence light‐up probe for live‐cell imaging. Copyright © 2015 John Wiley & Sons, Ltd.     

Microwave‐assisted one‐step green synthesis of amino‐functionalized fluorescent carbon nitride dots from chitosan

We present an economical, facile and effective microwave pyrolysis approach to synthesize highly amino‐functionalized fluorescent carbon nitride dots (CNDs). The formation and the functionalization of CNDs was accomplished simultaneously through the dehydration of chitosan. It is suggested that these CNDs have good water solublility and exhibit strong fluorescence. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis of highly luminescent and biocompatible CdTe/CdS/ZnS quantum dots using microwave irradiation: a comparative study of different ligands

We compared the effects of several ligands frequently used in aqueous synthesis, including L‐cysteine, L‐cysteine hydrochloride, N‐acetyl‐L‐cysteine (NAC), glutathione and 3‐mercaptopropionic acid, for microwave synthesis of CdTe quantum dots (QDs) in a sealed vessel with varied temperatures and times, and then developed a rapid microwave‐assisted protocol for preparing highly luminescent, photostable and biocompatible CdTe/CdS/ZnS core–multishell QDs. The effects of molecular structures of these ligands on QD synthesis under high temperatures were explored. Among these ligands, NAC was found to be the optimal ligand in terms of the optical properties of resultant QDs and reaction conditions. The emission wavelength of NAC‐capped CdTe QDs could reach 700 nm in 5 min by controlling the reaction temperature, and the resultant CdTe/CdS/ZnS core–multishell QDs could achieve the highest quantum yields up to 74% with robust photostability. In addition, the effects of temperature, growth time and shell–precursor ratio on shell growth were examined. Finally, cell culturing indicated the low cytotoxicity of CdTe/CdS/ZnS core–multishell QDs as compared to CdTe and CdTe/CdS QDs, suggesting their high potential for applications in biomedical imaging and diagnostics. Copyright © 2014 John Wiley & Sons, Ltd.     

Dark‐red‐emitting CdTe/Cd1‐xZnxS core/shell quantum dots: preparation and properties

CdTe nanocrystals (NCs) were fabricated through an organic synthesis. The growth and properties of CdTe NCs depended strongly on the preparation conditions. In a reaction system of octadecene and tetradecylphosphonic acid (TDPA), the growth was slow. CdTe NCs with cubic‐like morphology were created in trioctylamine (TOA) using octadecylphosphonic acid (ODPA)‐CdO or TDPA‐CdO as precursors. The TOA and ODPA system gives rise to NCs with high photoluminescence (PL) efficiencies (12%). A Cd_xZn_1‐xS shell coating on the CdTe core, gave rise to tunable dark red PL (630–670 nm). The morphology and PL properties of the CdTe cores were drastically affected by shell coating and this determined the properties of CdTe/Cd_xZn_1‐xS NCs. Small CdTe NCs were easily coated with Cd_xZn_1‐xS shells. The resulting core/shell NCs revealed a spherical morphology. However, shell growth became slow when large CdTe cores were used. This is ascribed to the cores with a cubic‐like morphology. CdS interlayer plays an important role for the formation of the CdTe/Cd_xZn_1‐xS NCs because the experimental result indicated it is difficult to coat CdTe NCs with a ZnS shell. The core/shell NCs benefited from a Cd_xZn_1‐xS composite shell because CdTe/CdS NCs created via a similar procedure revealed a low PL efficiency. Copyright © 2012 John Wiley & Sons, Ltd.     

The synthesis and modification of highly fluorescent carbon quantum dots for reversible detection of water‐soluble phosphonate‐1‐hydroxyethane‐1,1‐diphosphonic acid by fluorescence spectroscopy

Photoluminescent (PL) carbon quantum dots (CQDs) were prepared successfully using a facile and green procedure. They exhibited striking blue fluorescence and excellent optical properties, with a quantum yield as high as 61.44%. Due to the fluorescence quenching effect and the stronger complexing ability of the phosphoric acid group of 1‐hydroxyethane‐1,1‐diphosphonic acid (HEDP) to Fe³⁺ , CQDs doped with Fe³⁺ were adequately constructed as an efficient and sensitive fluorescent probe for HEDP‐specific sensing. The proposed fluorescent probe had a sensitive and rapid response in the range 5–70 μ M. Furthermore, quantitative molecular surface (QMS) analysis based on the Multiwfn program was applied to explore the complexation mode of HEDP and metal ions. The distribution of electrostatic potential (ESP), average local ionization energy (ALIE), the minimum value points and the position of the lone pair electrons on the surface of molecular van der Waals were further determined. More strikingly, this experiment achieved the quantitative detection of water‐soluble phosphonate‐HEDP, for the first time using fluorescence spectrometry. It has been proved to be an effective and intuitive sensing method for the detection of HEDP in real samples.     

Aqueous synthesis of CdTe/CdS/ZnS quantum dots and their optical and chemical properties

In this paper, we described a strategy for synthesis of thiol‐coated CdTe/CdS/ZnS (core–shell–shell) quantum dots (QDs) via aqueous synthesis approach. The synthesis conditions were systematically optimized, which included the size of CdTe core, the refluxing time and the number of monolayers and the ligands, and then the chemical and optical properties of the as‐prepared products were investigated. We found that the mercaptopropionic acid (MPA)‐coated CdTe/CdS/ZnS QDs presented highly photoluminescent quantum yields (PL QYs), good photostability and chemical stability, good salt tolerance and pH tolerance and favorable biocompatibility. The characterization of high‐resolution transmission electron microscopy (HRTEM), X‐ray powder diffraction (XRD) and fluorescence correlation spectroscopy (FCS) showed that the CdTe/CdS/ZnS QDs had good monodispersity and crystal structure. The fluorescence life time spectra demonstrated that CdTe/CdS/ZnS QDs had a longer lifetime in contrast to fluorescent dyes and CdTe QDs. Furthermore, the MPA‐stabilized CdTe/CdS/ZnS QDs were applied for the imaging of cells. Compared with current synthesis methods, our synthesis approach was reproducible and simple, and the reaction conditions were mild. More importantly, our method was cost‐effective, and was very suitable for large‐scale synthesis of CdTe/CdS/ZnS QDs for future applications. Copyright © 2010 John Wiley & Sons, Ltd.     

One‐pot synthesis and characterization CdTe:Zn2+ quantum dots and its molecular interaction with calf thymus DNA

Tremendous research efforts have been dedicated to fabricating high‐quality Zn‐doped CdTe quantum dots (QDs) for any potential biomedical applications. In particular, the correlation of issues regarding how QDs interact with DNA is of greatest importance. Herein, a pH‐responsive study of the interactions between CdTe:Zn²⁺ quantum dots with 4 different sizes and calf thymus DNA (ctDNA) was conducted using multispectroscopic techniques and electrochemical investigation. Fluorescence studies revealed that this interaction process is predominantly a static process and groove binding was the main binding mode for CdTe:Zn²⁺ QDs to ctDNA. The calculated negative values of enthalpy (?45.06 kJ mol^?1) and entropy (?133.62 J mol^?1 K^?1) with temperature changes indicated that the hydrogen bonds and van der Waals interactions played major roles in the reaction. Furthermore, circular dichroism spectroscopy and Fourier transform infrared spectrometry analyses indicate that the normal conformation of ctDNA is discombobulated by CdTe:Zn²⁺ QDs. In addition, the electrochemical behavior of the affinity of CdTe:Zn²⁺ QDs for ctDNA agreed well with the results obtained from fluorescence experiments. This study might be meaningful for understanding the molecular binding mechanism of QDs for DNA and provides a basis for QD‐labeled systems.     

Highly luminescent hybrid SiO2‐coated CdTe quantum dots: synthesis and properties

Novel hybrid SiO₂‐coated CdTe quantum dots (QDs) were created using CdTe QDs coated with a hybrid SiO₂ shell containing Cd²⁺ ions and a sulfur source via a sol–gel process in aqueous solution. Aqueous CdTe QDs with tunable emitting color created through a reaction between cadmium chloride and sodium hydrogen telluride was used as cores for the preparation of hybrid SiO₂‐coated CdTe QDs. In our experiments we found that the surface state of the cores and preparation conditions that affect the formation of the hybrid SiO₂ shell also greatly affect photoluminescence of the hybrid SiO₂‐coated CdTe QDs. The generation of CdS‐like clusters in the vicinity of the CdTe QDs, caused the quantum size effect of the QDs to be greatly reduced, which changes photoluminescence properties of the hybrid QDs fundamentally. Namely, the novel hybrid SiO₂ shell played an important role in generating a series of specific optical properties. In addition, the novel hybrid SiO₂ shell can be created if no CdTe QD is added. In order to gain an insight into the inter structure of the hybrid shell, we characterized the hybrid SiO₂‐coated CdTe QDs using X‐ray diffraction analysis and discuss the formation mechanism of such a hybrid structure. This work is significant because the novel hybrid SiO₂‐coated CdTe QDs with its excellent properties can be used in many applications, such as biolabeling and optoelectronic devices. Copyright © 2013 John Wiley & Sons, Ltd.     

Hydrothermal synthesis for high‐quality glutathione‐capped CdxZn1 – xSe and CdxZn1 – xSe/ZnS alloyed quantum dots and its application in Hg(II) sensing

High‐quality Cd_xZn_{1 – x}Se and Cd_xZn_{1 – x}Se/ZnS core/shell quantum dots (QDs) emitting in the violet–green spectral range have been successfully prepared using hydrothermal methods. The obtained aqueous Cd_xZn_{1 – x}Se and Cd_xZn_{1 – x}Se/ZnS QDs exhibit a tunable photoluminescence (PL) emission (from 433.5 nm to 501.2 nm) and a favorable narrow photoluminescence bandwidth [full width at half maximum (FWHM): 30–42 nm]. After coating with a ZnS shell, the quantum yield increases from 40.2% to 48.1%. These Cd_xZn_{1 – x}Se and Cd_xZn_{1 – x}Se/ZnS QDs were characterized by transmission electron microscopy, X‐ray diffraction, X‐ray photoelectron spectroscopy and Fourier transform infrared (FTIR) spectroscopy. To further understand the alloying mechanism, the growth kinetics of Cd_xZn_{1 – x}Se were investigated through measuring the fluorescence spectra and X‐ray diffraction spectra at different growth intervals. The results demonstrate that the inverted ZnSe/CdSe core/shell structure is formed initially after the injection of Cd²⁺. With further heating, the core/shell structured ZnSe/CdSe is transformed into alloyed Cd_xZn_{1 – x}Se QDs with the diffusion of Cd²⁺ into ZnSe matrices. With increasing the reaction temperature from 100 °C to 180 °C, the duration time of the alloying process decreases from 210 min to 20 min. In addition, the cytotoxicity of Cd_xZn_{1 – x}Se and Cd_xZn_{1 – x}Se/ZnS QDs were investigated. The results indicate that the as‐prepared Cd_xZn_{1 – x}Se/ZnS QDs have low cytotoxicity, which makes them a promising probe for cell imaging. Finally, the as‐prepared Cd_xZn_{1 – x}Se/ZnS QDs were utilized to ultrasensitively and selectively detect Hg²⁺ ions with a low detection limit (1.8 nM).     

H2O2‐ and pH‐sensitive CdTe quantum dots as fluorescence probes for the detection of glucose

A novel fluorescence assay system for glucose was developed with thioglycollic acid (TGA)‐capped CdTe quantum dots (QDs) as probes. The luminescence quantum yield of the TGA‐capped CdTe QDs was highly sensitive to H₂O₂ and pH. In the presence of glucose oxidase, glucose is oxidized to yield, gluconic acid and H₂O₂. H₂O₂ and H⁺ (dissociated from gluconic acid) intensively quenched the fluorescence of QDs. The experimental results showed that the quenched fluorescence was proportional to the glucose concentration within the range of 0.01–5.0 mm under optimized experimental conditions. Compared with most of the existing methods, this newly developed system possesses many advantages, including simplicity, low cost, high flexibility, and good sensitivity. Furthermore, no complicated chemical modification of QDs and enzyme immobilization was needed in this system. Copyright © 2012 John Wiley & Sons, Ltd.     

Characterization and cancer cell targeted imaging properties of human antivascular endothelial growth factor monoclonal antibody conjugated CdTe/ZnS quantum dots

High luminescence quantum yield water‐soluble CdTe/ZnS core/shell quantum dots (QDs) stabilized with thioglycolic acid were synthesized. QDs were chemically coupled to fully humanized antivascular endothelial growth factor₁₆₅ monoclonal antibodies to produce fluorescent probes. These probes can be used to assay the biological affinity of the antibody. The properties of QDs conjugated to an antibody were characterized by ultraviolet and visible spectrophotometry, fluorescent spectrophotometry, sodium dodecyl sulfate–polyacrylamide gel electrophoresis, transmission electron microscopy and fluorescence microscopy. Cell‐targeted imaging was performed in human breast cancer cell lines. The cytotoxicity of bare QDs and fluorescent probes was evaluated in the MCF‐7 cells with an MTT viability assay. The results proved that CdTe/ZnS QD–monoclonal antibody nanoprobes had been successfully prepared with excellent spectral properties in target detections. Surface modification by ZnS shell could mitigate the cytotoxicity of cadmium‐based QDs. The therapeutic effects of antivascular endothelial growth factor antibodies towards cultured human cancer cells were confirmed by MTT assay. Copyright © 2014 John Wiley & Sons, Ltd.     

Chemiluminometric determination of ascorbic acid in pharmaceutical formulations exploiting photo‐activation of GSH‐capped CdTe quantum dots

An automated multi‐pumping flow system is proposed for the chemiluminometric determination of ascorbic acid in pharmaceutical formulations, relying on the ability of semiconductor nanocrystals to generate short‐lived reactive species upon photo‐irradiation. A photo‐unit based on visible‐light‐emitting diodes is used to photo‐excite cadmium telluride (CdTe) quantum dots capped with glutathione, leading to the generation of radicals that react with luminol under alkaline conditions, yielding the chemiluminescence. Ascorbic acid acts as a radical scavenger, preventing the oxidation of luminol, thus ensuring a concentration‐dependent chemiluminescence quenching. After system optimization, a linear working range of 5.0 × 10^‐7 to 5.0 × 10^‐6 mol/L ascorbic acid (r = 0.9967, n = 5) was attained, with a detection limit of 3.05 × 10^‐7 mol/L and a sampling rate of 200/h. The flow system was applied to the analysis of pharmaceutical formulations and the results were in good agreement with those obtained by the reference titrimetric procedure (RD < ± 4.3%, n = 7). Copyright © 2014 John Wiley & Sons, Ltd.     

Nucleation temperature‐controlled synthesis and in vitro toxicity evaluation of l‐cysteine‐capped Mn:ZnS quantum dots for intracellular imaging

Quantum dots (QDs), one of the fastest developing and most exciting fluorescent materials, have attracted increasing interest in bioimaging and biomedical applications. The long‐term stability and emission in the visible region of QDs have proved their applicability as a significant fluorophore in cell labelling. In this study, an attempt has been made to explore the efficacy of l ‐cysteine as a capping agent for Mn‐doped ZnS QD for intracellular imaging. A room temperature nucleation strategy was adopted to prepare non‐toxic, water‐dispersible and biocompatible Mn:ZnS QDs. Aqueous and room temperature QDs with l ‐cysteine as a capping agent were found to be non‐toxic even at a concentration of 1500 µg/mL and have wide applications in intracellular imaging. Copyright © 2015 John Wiley & Sons, Ltd.     

Novel fluorescent sensor using molecularly imprinted silica microsphere‐coated CdSe@CdS quantum dots and its application in the detection of 2,4,6‐trichlorophenol from environmental water samples

In this study, a high fluorescence sensitivity and selectivity, molecularly imprinted nanofluorescent polymer sensor (MIP@SiO₂@QDs) was prepared using a reverse microemulsion method. 2,4,6‐Trichlorophenol (2,4,6‐TCP) was detected using fluorescence quenching. Tetraethyl orthosilicate (TEOS), quantum dots (QDs) and 3‐aminopropyltriethoxysilane (APTS) were used as cross‐linker, signal sources and functional monomer respectively. The sensor (MIP@SiO₂@QDs) and the non‐imprinted polymer sensor (NIP@SiO₂@QDs) were characterized using infra‐red (IR) analysis, X‐ray diffraction (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The selectivity of MIP@SiO₂@QDs was examined by comparing 2,4,6‐TCP with other similar functional substances including 2,4‐dichlorophenol (2,4‐DCP), 2,6‐dichlorophenol (2,6‐DCP) and 4‐chlorophenol (4‐CP). Results showed that MIP@SiO₂@QDs had better selectivity for 2,4,6‐TCP than the other compounds. Fluorescence quenching efficiency displayed a good linear response at the 2,4,6‐TCP concentration range 5–1000 μmol/L. The limit of detection (LOD) was 0.9 μmol/L (3σ, n = 9). This method was equally applicable for testing actual samples with a recovery rate of 98.0–105.8%. The sensor had advantages of simple pretreatment, good sensitivity and selectivity, and wide linear range and could be applied for the rapid detection of 2,4,6‐TCP in actual samples.     

A highly selective and simple fluorescent sensor for mercury (II) ion detection based on cysteamine‐capped CdTe quantum dots synthesized by the reflux method

Cysteamine (CA)‐capped CdTe quantum dots (QDs) (CA–CdTe QDs) were prepared by the reflux method and utilized as an efficient nano‐sized fluorescent sensor to detect mercury (II) ions (Hg²⁺). Under optimum conditions, the fluorescence quenching effect of CA–CdTe QDs was linear at Hg²⁺ concentrations in the range of 6.0–450 nmol/L. The detection limit was calculated to be 4.0 nmol/L according to the 3σ IUPAC criteria. The influence of 10‐fold Pb²⁺, Cu²⁺ and Ag⁺ on the determination of Hg²⁺ was < 7% (superior to other reports based on crude QDs). Furthermore, the detection sensitivity and selectivity were much improved relative to a sensor based on the CA–CdTe QDs probe, which was prepared using a one‐pot synthetic method. This CA–CdTe QDs sensor system represents a new feasibility to improve the detection performance of a QDs sensor by changing the synthesis method. Copyright © 2014 John Wiley & Sons, Ltd.     

CdTe1‐xSex/Cd0.5Zn0.5S core/shell quantum dots: core composition and property

Alloy CdTe_1‐xSe_x quantum dots (QDs) have been fabricated by an organic route using Cd, Te and Se precursors in a mixture of trioctylamine and octadecylphosphonic acid at 280 °C. The variation of photoluminescence (PL) peak wavelength of the CdTe_1‐xSe_x QDs compared with CdTe QDs confirmed the formation of an alloy structure. The Se component drastically affected the stability of CdTe_1‐xSe_x QDs. A Cd_0.5Zn_0.5S shell coating on CdTe_1‐xSe_x cores was carried out using oleic acid as a capping agent. CdTe_1‐xSe_x/Cd_0.5Zn_0.5S core/shell QDs revealed dark red PL while a yellow PL peak was observed for the CdTe_1‐xSe_x cores. The PL efficiency of the core/shell QDs was drastically increased (less than 1% for the cores and up to 65% for the core/shell QDs). The stability of QDs in various buffer solutions was investigated. Core/shell QDs can be used for biological applications because of their high stability, tunable PL and high PL efficiency. Copyright © 2013 John Wiley & Sons, Ltd.     

High‐molecular‐weight poly(Gly‐Val‐Gly‐Val‐Pro) synthesis through microwave irradiation

In this study, we synthesized a polypeptide from its pentapeptide unit using microwave irradiation. Effective methods for polypeptide synthesis from unit peptides have not been reported. Here, we used a key elastin peptide, H‐GlyValGlyValPro‐OH (GVGVP), as the monomer peptide. It is difficult to obtain poly(Gly‐Val‐Gly‐Val‐Pro) (poly(GVGVP)) from the pentapeptide unit of elastin, GVGVP, via polycondensation. Poly(GVGVP) prepared from genetically recombinant Escherichia coli is a well‐known temperature‐sensitive polypeptide, and this temperature sensitivity is known as the lower critical solution temperature. When microwave irradiation was performed in the presence of various additives, the pentapeptide (GVGVP) polycondensation reaction proceeded smoothly, resulting in a product with a high molecular weight in a relatively good yield. The reaction conditions, like microwave irradiation, coupling agents, and solvents, were optimized to increase the reaction efficiency. The product exhibited a molecular weight greater than Mr 7000. Further, the product could be synthesized on a gram scale. The synthesized polypeptide exhibited a temperature sensitivity that was similar to that of poly(GVGVP) prepared from genetically recombinant E. coli. Therefore, this technique offers a facile and quick approach to prepare polypeptides in large amounts. Copyright © 2016 European Peptide Society and John Wiley & Sons, Ltd.     

Involvement of ABC transporters in the efflux and toxicity of MPA‐COOH‐CdTe quantum dots in human breast cancer SK‐BR‐3 cells

This paper aimed to study the possible involvement of adenosine triphosphate‐binding cassette (ABC) transporters in the detoxification of quantum dots (QDs) in human breast carcinoma (SK‐BR‐3) cells. The effects of QD sizes on such interactions were also evaluated. For this purpose, we used monodispersed MPA‐COOH‐CdTe QDs with different diameters (emission length at 560 and 625 nm, named as QD‐560 and QD‐625). Such QDs tended to accumulate in cells and cause significant toxicity. Using specific inhibitors of ABC transporters, the cellular accumulation and toxicity of QDs in SK‐BR‐3 cells were significantly affected. Moreover, treatment of QDs caused concentration‐ and time‐dependent induction of ABC transporters. Furthermore, the induction effects of smaller QDs were found to be greater than larger ones at equivalent concentrations, suggesting a size‐dependent recognition of substrates by ABC transporters. Overall, these results provided important support for the modulation of QDs toxicity by ABC transporters.