Enhanced Energy Storage in Nanocomposite Capacitors through Aligned PZT Nanowires by Uniaxial Strain Assembly

The design of nanocomposite capacitors poses certain challenges due to the reduced dielectric strength resulting from the integration of typically high dielectric fillers into the polymer. In prior efforts it was demonstrated that increasing of the filler could lead to energy‐storage densities up to 19.3% above the neat polymer. To further enhance the energy density, a novel strategy is developed to align nanowires in a thermoplastic matrix by uniaxial stretching assembly. It is demonstrated that the energy‐storage capability of the nanocomposite can be enhanced through the alignment of lead zirconate titanate (PZT) nanowires (NWs) in the direction of the applied electric field compared to randomly oriented samples. The maximum energy density of the nanocomposites is as high as 1.28 J cm^?3 at a volume fraction of 40% PZT NWs (aspect ratio around 14) with axis of alignment in the direction of the electric field. The findings of this research could lead to broader interest due to development of the piezoceramic nanocomposites with enhanced dielectric properties for use in next‐generation energy‐storage and conversion devices.     

Synthesis of High Aspect Ratio BaTiO3 Nanowires for High Energy Density Nanocomposite Capacitors

High energy density capacitors are critically important in advanced electronic devices and power systems since they can reduce the weight, size and cost required to meet a desired application. Nanocomposites hold strong potential for increasing the performance of high power energy sources; however, the energy density of most nanocomposites is still low compared to commercial capacitors and neat polymers. Here, we develop a new synthesis method for the growth of high aspect ratio barium titanate nanowires (BaTiO₃) nanowires (NWs) with high yield. High energy density nanocomposite capacitors are fabricated using surface‐functionalized high aspect ratio BaTiO₃ NWs in a poly(vinylidene fluoride‐trifluoroethylene‐chlorofluoroethylene) (P(VDF‐TrFE‐CFE)) matrix. At a 17.5% volume fraction, the nanocomposites show more than 45.3% increase in energy density above that of the pure P(VDF‐TrFE‐CFE) polymer (10.48 J/cc compared to 7.21 J/cc) at electric field 300 MV/m. This value is significant and exceeds those reported for the conventional polymer‐ceramic nanocomposites; it is also more than seven times larger than high performance commercial polypropylene capacitor (1.2 J/cc at 640 MV/m). In addition, our nanocomposite capacitor has a maximum power density as high as 1.2 MW/cc occurring only 1.52 μs after the start of discharge. The findings of this research could lead to enhanced interest in nanowires based nanocomposites due to their potential for achieving next generation energy storage devices.     

Bioinspired Ultrastrong Nanocomposite Membranes for Salinity Gradient Energy Harvesting from Organic Solutions

Efforts to extract energy from waste organic solutions can not only support clean environments but also help to alleviate the energy crisis. Here, a bioinspired ultrastrong nanocomposite membrane is developed via the layer‐by‐layer method based on aramid nanofiber‐graphene oxide (AGO) with good mechanical properties for salinity gradient energy harvesting from organic solutions. Benefiting from the 1D and 2D network interlocking arrangement, the AGO membrane shows an unprecedented mechanical stress of 688 MPa and maintains its integrity after soaking in organic solvents for 24 h. Impressively, when LiCl is diluted in methanol, the AGO membrane device with a working area of 113 mm² produces a current and a measured power generation of 28 ± 11 µA and 3140 ± 960 nW (C_feed = 2 mol L^?1), respectively. Thus, the working area of the AGO membrane for salinity gradient energy harvesting and temperature‐related energy harvesting enables its use in practical applications. In addition, 14 cells with the methanol‐LiCl solution (C_feed = 1 mol L^?1) can produce a voltage up to 1.82 V to light a liquid crystal display. Therefore, this AGO nanocomposite membrane presents a promising avenue to harvest salinity gradient energy from organic solutions.     

Pushing the Energy Output and Cyclability of Sodium Hybrid Capacitors at High Power to New Limits

Hybrid capacitors, especially sodium hybrid capacitors (NHCs), have continued to gain importance and are extensively studied based on their excellent potential to serve as advanced devices for fulfilling high energy and high power requirements at a low cost. To achieve remarkable performance in hybrid capacitors, the two electrodes employed must be superior with enhanced charge storage capability and fast kinetics. In this study, a new sodium hybrid capacitor system with a sodium super ionic conductor NaTi₂(PO₄)₃ grown on graphene nanosheets as an intercalation electrode and 2D graphene nanosheets as an adsorption electrode is reported for the first time. This new system delivers a high energy density of ≈80 W h kg^?1 and a high specific power of 8 kW kg^?1. An ultralow performance fading of ≈0.13% per 1000 cycles (90%–75 000 cycles) outperforms previously reported sodium ion capacitors. The enhanced charge transfer kinetics and reduced interfacial resistance at high current rates deliver a high specific energy without compromising the high specific power along with high durability, and thereby bridge batteries and capacitors. This new research on kinetically enhanced NHCs can be a trendsetter for the development of advanced energy storage devices requiring high energy—high power.     

Surface Pseudocapacitive Mechanism of Molybdenum Phosphide for High‐Energy and High‐Power Sodium‐Ion Capacitors

Sodium‐based energy storage technologies are potential candidates for large‐scale grid applications owing to the earth abundance and low cost of sodium resources. Transition metal phosphides, e.g. MoP, are promising anode materials for sodium‐ion storage, while their detailed reaction mechanisms remain largely unexplored. Herein, the sodium‐ion storage mechanism of hexagonal MoP is systematically investigated through experimental characterizations, density functional theory calculations, and kinetics analysis. Briefly, it is found that the naturally covered surface amorphous molybdenum oxides layers on the MoP grains undergo a faradaic redox reaction during sodiation and desodiation, while the inner crystalline MoP remains unchanged. Remarkably, the MoP anode exhibits a pseudocapacitive‐dominated behavior, enabling the high‐rate sodium storage performance. By coupling the pseudocapacitive anode with a high‐rate‐battery‐type Na₃V₂O₂(PO₄)₂F@rGO cathode, a novel sodium‐ion full cell delivers a high energy density of 157 Wh kg^?1 at 97 W kg^?1 and even 52 Wh kg^?1 at 9316 W kg^?1. These findings present the deep understanding of the sodium‐ion storage mechanism in hexagonal MoP and offer a potential route for the design of high‐rate sodium‐ion storage materials and devices.     

Revealing Pseudocapacitive Mechanisms of Metal Dichalcogenide SnS2/Graphene‐CNT Aerogels for High‐Energy Na Hybrid Capacitors

SnS₂ nanoplatelet electrodes can offer an exceptionally high pseudocapacitance in an organic Na⁺ ion electrolyte system, but their underlying mechanisms are still largely unexplored, hindering the practical applications of pseudocapacitive SnS₂ anodes in Na‐ion batteries (SIBs) and Na hybrid capacitors (SHCs). Herein, SnS₂ nanoplatelets are grown directly on SnO₂/C composites to synthesize SnS₂/graphene‐carbon nanotube aerogel (SnS₂/GCA) by pressurized sulfidation where the original morphology of carbon framework is preserved. The composite electrode possessing a large surface area delivers a remarkable specific capacity of 600.3 mA h g^?1 at 0.2 A g^?1 and 304.8 mA h g^?1 at an ultrahigh current density of 10 A g^?1 in SIBs. SHCs comprising a SnS₂/GCA composite anode and an activated carbon cathode present exceptional energy densities of 108.3 and 26.9 W h kg^?1 at power densities of 130 and 6053 W kg^?1, respectively. The in situ transmission electron microscopy and the density functional theory calculations reveal that the excellent pseudocapacitance originates from the combination of Na adsorption on the surface/Sn edge of SnS₂ nanoplatelets and ultrafast Na⁺ ion intercalation into the SnS₂ layers.     

CdS/Graphene Nanocomposite Photocatalysts

Heterogeneous photocatalysis using semiconductors and renewable solar energy has been regarded as one of the most promising processes to alleviate, and even solve, both the world crises of energy supply and environmental pollution. In the past few years, many encouraging achievements have been made in the research area of graphene‐based semiconductor photocatalysts. Among them, CdS/graphene nanocomposites have attracted extensive attention as an important kind of photocatalyst in chemical and material science, due to its superior photocatalytic activity and photostability under visible‐light irradiation. The aim here is to address the enhancement mechanism of the photocatalytic performance of CdS/graphene composite photocatalysts, and systematically summarize recent progress regarding the design and synthesis of CdS/graphene nanocomposites. These nanocomposites are promising for a great diversity of applications in visible‐light photocatalytic fields, including artificial photosynthetic systems (photocatalytic hydrogen production and CO₂ reduction), environmental remediation, and organic photosynthesis. Special attention is given to the photocatalytic hydrogen production and pollutant photodegradation over CdS/graphene nanocomposite photocatalysts. Furthermore, perspectives on CdS/graphene‐based materials are discussed, including the various remaining challenges for large‐scale applications, identifying prospective areas for related research in this field.