Tailored Electron Transfer Pathways in Aucore/Ptshell–Graphene Nanocatalysts for Fuel Cells

Au_core/Pt_shell–graphene catalysts (G‐Cys‐Au@Pt) are prepared through chemical and surface chemical reactions. Au–Pt core–shell nanoparticles (Au@Pt NPs) covalently immobilized on graphene (G) are efficient electrocatalysts in low‐temperature polymer electrolyte membrane fuel cells. The 9.5 ± 2 nm Au@Pt NPs with atomically thin Pt shells are attached on graphene via l ‐cysteine (Cys), which serves as linkers controlling NP loading and dispersion, enhancing the Au@Pt NP stability, and facilitating interfacial electron transfer. The increased activity of G‐Cys‐Au@Pt, compared to non‐chemically immobilized G‐Au@Pt and commercial platinum NPs catalyst (C‐Pt), is a result of (1) the tailored electron transfer pathways of covalent bonds integrating Au@Pt NPs into the graphene framework, and (2) synergetic electronic effects of atomically thin Pt shells on Au cores. Enhanced electrocatalytic oxidation of formic acid, methanol, and ethanol is observed as higher specific currents and increased stability of G‐Cys‐Au@Pt compared to G‐Au@Pt and C–Pt. Oxygen reduction on G‐Cys‐Au@Pt occurs at 25 mV lower potential and 43 A g_Pt^?1 higher current (at 0.9 V vs reversible hydrogen electrode) than for C–Pt. Functional tests in direct fomic acid, methanol and ethanol fuel cells exhibit 95%, 53%, and 107% increased power densities for G‐Cys‐Au@Pt over C–Pt, respectively.     

Carbon‐Coated Si Nanoparticles Anchored between Reduced Graphene Oxides as an Extremely Reversible Anode Material for High Energy‐Density Li‐Ion Battery

Improving the lithium (Li) storage properties of silicon (Si)‐based anode materials is of great significance for the realization of advanced Li‐ion batteries. The major challenge is to make Si‐based anode materials maintain electronic conduction and structural integrity during cycling. Novel carbon‐coated Si nanoparticles (NPs)/reduced graphene oxides (rGO) composites are synthesized through simple solution mixing and layer‐by‐layer assembly between polydopamine‐coated Si NPs and graphene oxide nanosheets by filtration, followed by a thermal reduction. The anodic properties of this composite demonstrate the potency of the novel hybrid design based on two dimensional materials for extremely reversible energy conversion and storage. A high capacity and an extremely stable cycle life are simultaneously realized with carbon‐coated Si/rGO composite, which has a sandwich structure. The unprecedented electrochemical performance of this composite can be ascribed to the synergistic effect of polydopamine and rGO. The polydopamine layer forms strong hydrogen bonding with rGO through chemical cross‐linking, thus firmly anchoring Si NPs on rGO sheets to prevent the aggregation of Si NPs and their electronic contact loss. Finally, its structural feature with stacked rGO clipping carbon‐coated Si NPs inside it enables to keep the overall electrode highly conductive and mechanically robust, thus maintaining its initial capacity even with extended cycling.     

Outstanding Low Temperature Thermoelectric Power Factor from Completely Organic Thin Films Enabled by Multidimensional Conjugated Nanomaterials

In an effort to create a paintable/printable thermoelectric material, comprised exclusively of organic components, polyaniline (PANi), graphene, and double‐walled nanotube (DWNT) are alternately deposited from aqueous solutions using the layer‐by‐layer assembly technique. Graphene and DWNT are stabilized with an intrinsically conductive polymer, poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS). An 80 quadlayer thin film (≈1 μm thick), comprised of a PANi/graphene‐PEDOT:PSS/PANi/DWNT‐PEDOT:PSS repeating sequence, exhibits unprecedented electrical conductivity (σ ≈ 1.9 × 10⁵ S m^?1) and Seebeck coefficient (S ≈ 120 μV K^?1) for a completely organic material. These two values yield a thermoelectric power factor (PF = S ² σ ^?1) of 2710 μW m^?1 K^?2, which is the highest value ever reported for a completely organic material and among the highest for any material measured at room temperature. These outstanding properties are attributed to the highly ordered structure in the multilayer assembly. This water‐based thermoelectric nanocomposite is competitive with the best inorganic semiconductors (e.g., bismuth telluride) at room temperature and can be applied as a coating to any flexible surface (e.g., fibers in clothing). For the first time, there is a real opportunity to harness waste heat from unconventional sources, such as body heat, to power devices in an environmentally‐friendly way.     

Liquid‐Phase Exfoliated Metallic Antimony Nanosheets toward High Volumetric Sodium Storage

Metallic antimony (Sb) with gray allotrope has rarely been considered from the viewpoint of two‐dimension layered system is actually a graphite‐like material, in which Sb layers consist of fused, ruffled, and six‐membered rings. Given that metallic Sb nanosheets can be played like graphene, it would be anticipated to obtain a new anode material with superior electrochemical performances for sodium storage. In this work, we propose an efficient strategy to fabricate free‐standing metallic Sb nanosheets via liquid‐phase exfoliation of gray Sb powder in an ios‐propyle alcohol (IPA) solution with a constant concentration of sodium hydroxide. As a proof of the concept, several hybrid films composed of metallic Sb nanosheets and graphene with tunable densities are achieved, in which the notorious volume change of metallic Sb can be efficiently alleviated with the aid of the good flexible graphene, and the whole density of electrode films can be significantly improved by harnessing the high density of Sb nanosheets. As a consequence, the optimized metallic Sb nanosheets‐graphene (SbNS‐G) film displays a high volumetric capacity of 1226 mAh cm^–3, high‐rate capability and good cycle performance for sodium storage.     

Enhancing LSPR Sensitivity of Au Gratings through Graphene Coupling to Au Film

A particular interesting plasmonic system is that of metallic nanostructures interacting with metal films. As the localized surface plasmon resonance (LSPR) behavior of gold nanostructures (Au NPs) on the top of a gold thin film is exquisitely sensitive to the spacer distance of the film-Au NPs, we investigate in the present work the influence of a few-layered graphene spacer on the LSPR behavior of the NPs. The idea is to evidence the role of few-layered graphene as one of the thinnest possible spacer. We first show that the coupling to the Au film induces a strong lowering at around 507 nm and sharpening of the main LSPR of the Au NPs. Moreover, a blue shift in the main LSP resonance of about 13 nm is observed in the presence of a few-layered graphene spacer when compared to the case where gold nanostructures are directly linked to a gold thin film. Numerical simulations suggest that this LSP mode is dipolar and that the hot spots of the electric field are pushed to the top corners of the NPs, which makes it very sensitive to surrounding medium optical index changes and thus appealing for sensing applications. A figure of merit of such a system (gold/graphene/Au NPs) is 2.8, as compared to 2.1 for gold/Au NPs. This represents a 33 % gain in sensitivity and opens-up new sensing strategies.     

A Robust Route to Co2(OH)2CO3 Ultrathin Nanosheets with Superior Lithium Storage Capability Templated by Aspartic Acid‐Functionalized Graphene Oxide

Two‐dimensional (2D) nanomaterials are widely recognized as an important class of functional materials possessing superior electrochemical reaction kinetics. Herein, an L‐aspartic acid (AA)‐modified graphene oxide (GO) templating strategy is developed to in situ yield ultrathin (i.e., ≈5 nm) cobalt carbonate hydroxide (Co₂(OH)₂CO₃) nanosheets as advanced anode materials of lithium ion batteries. Notably, the covalent tethering of AA on the GO surface renders a high density of carboxyl groups that impart effective loading of Co‐containing precursors and subsequent growth into Co₂(OH)₂CO₃ nanosheets bridging adjacent GO layers. The lasagna‐like Co₂(OH)₂CO₃‐GO nanocomposites exhibit an ultrahigh lithium storage capacity of 1770 mAh g^?1 after 500 cycles at 100 mA g^?1. It is noteworthy that the cycled Co₂(OH)₂CO₃ phase separates into homogeneously dispersed Co(OH)₂ and CoCO₃ phases with two different charge plateaus at ≈1.2 and 2.0 V, respectively, which effectively inhibit large‐scale homophase coarsening of Co, Li₂CO₃, and LiOH. The much shortened Li⁺/e^? transfer distance enabled by individual ultrathin Co₂(OH)₂CO₃ nanosheet together with robust layer‐by‐layer assembled nanostructure of Co₂(OH)₂CO₃‐GO confers the superior electrochemical reactivity and mechanical stability. As such, the amino acid‐modified GO templating strategy may represent a simple yet robust means of crafting a variety of 2D nanostructured composites of interest for energy storage applications.     

Low‐Overpotential Electrocatalytic Water Splitting with Noble‐Metal‐Free Nanoparticles Supported in a sp3 N‐Rich Flexible COF

Covalent organic frameworks (COFs) are crystalline organic polymers with tunable structures. Here, a COF is prepared using building units with highly flexible tetrahedral sp³ nitrogens. This flexibility gives rise to structural changes which generate mesopores capable of confining very small (<2 nm sized) non‐noble‐metal‐based nanoparticles (NPs). This nanocomposite shows exceptional activity toward the oxygen‐evolution reaction from alkaline water with an overpotential of 258 mV at a current density of 10 mA cm^?2. The overpotential observed in the COF‐nanoparticle system is the best in class, and is close to the current record of ≈200 mV for any noble‐metal‐free electrocatalytic water splitting system—the Fe–Co–Ni metal‐oxide‐film system. Also, it possesses outstanding kinetics (Tafel slope of 38.9 mV dec^?1) for the reaction. The COF is able to stabilize such small‐sized NP in the absence of any capping agent because of the COF–Ni(OH)₂ interactions arising from the N‐rich backbone of the COF. Density‐functional‐theory modeling of the interaction between the hexagonal Ni(OH)₂ nanosheets and the COF shows that in the most favorable configuration the Ni(OH)₂ nanosheets are sandwiched between the sp³ nitrogens of the adjacent COF layers and this can be crucial to maximizing their synergistic interactions.     

Graphene‐Based Electron Transport Layers in Perovskite Solar Cells: A Step‐Up for an Efficient Carrier Collection

The electron transport layer (ETL) plays a fundamental role in perovskite solar cells. Recently, graphene‐based ETLs have been proved to be good candidate for scalable fabrication processes and to achieve higher carrier injection with respect to most commonly used ETLs. Here, the effects of different graphene‐based ETLs in sensitized methylammonium lead iodide (MAPI) solar cells are experimentally studied. By means of time‐integrated and picosecond time‐resolved photoluminescence techniques, the carrier recombination dynamics in MAPI films embedded in different ETLs is investigated. Using graphene doped mesoporous TiO₂ (G+mTiO₂) with the addition of a lithium‐neutralized graphene oxide (GO‐Li) interlayer as ETL, it is found find that the carrier collection efficiency is increased by about a factor two with respect to standard mTiO₂. Taking advantage of the absorption coefficient dispersion, the MAPI layer morphology is probed, along the thickness, finding that the MAPI embedded in the ETL composed by G+mTiO₂ plus GO‐Li brings to a very good crystalline quality of the MAPI layer with a trap density about one order of magnitude lower than that found with the other ETLs. In addition, this ETL freezes MAPI at the tetragonal phase, regardless of the temperature. Graphene‐based ETLs can open the way to significant improvement of perovskite solar cells.     

2D Assembly of Confined Space toward Enhanced CO2 Electroreduction

Rational design of electrocatalysts toward efficient CO₂ electroreduction has the potential to reduce carbon emission and produce value‐added chemicals. In this work, a strategy of constructing 2D confined‐space as molecular reactors for enhanced electrocatalytic CO₂ reduction selectivity is demonstrated. Highly ordered 2D nanosheet lamella assemblies are achieved via weak molecular interaction of atomically thin titania nanosheets, a variety of cationic surfactants, and SnO₂ nanoparticles. The interlayer spacings can be tuned from 0.9 to 3.0 nm by using different surfactant molecules. These 2D assemblies of confined‐space catalysts exhibit a strong size dependence of CO₂ electroreduction selectivity, with a peak Faradaic efficiency of 73% for formate production and excellent electrochemical stability at an optimal interspacing of ≈2.0 nm. This work suggests great potential for constructing new molecular‐size reactors, for highly selective electrocatalytic CO₂ reduction.     

Morphological and optical characterization of polyelectrolyte multilayers incorporating nanocrystalline cellulose

Aqueous layer-by-layer (LbL) processing was used to create polyelectrolyte multilayer (PEM) nanocomposites containing cellulose nanocrystals and poly(allylamine hydrochloride). Solution-dipping and spin-coating assembly methods gave smooth, stable, thin films. Morphology was studied by atomic force microscopy (AFM) and scanning electron microscopy (SEM), and film growth was characterized by X-ray photoelectron spectroscopy (XPS), ellipsometry, and optical reflectometry. Relatively few deposition cycles were needed to give full surface coverage, with film thicknesses ranging from 10 to 500 nm. Films prepared by spin-coating were substantially thicker than solution-dipped films and displayed radial orientation of the rod-shaped cellulose nanocrystals. The relationship between film color and thickness is discussed according to the principles of thin film interference and indicates that the iridescent properties of the films can be easily tailored in this system.     

Facile Synthesis of 3D MnO2–Graphene and Carbon Nanotube–Graphene Composite Networks for High‐Performance,Flexible, All‐Solid‐State Asymmetric Supercapacitors

The integration of graphene nanosheets on the macroscopic level using a self‐assembly method has been recognized as one of the most effective strategies to realize the practical applications of graphene materials. Here, a facile and scalable method is developed to synthesis two types of graphene‐based networks, manganese dioxide (MnO₂)–graphene foam and carbon nanotube (CNT)–graphene foam, by solution casting and subsequent electrochemical methods. Their practical applications in flexible all‐solid‐state asymmetric supercapacitors are explored. The proposed method facilitates the structural integration of graphene foam and the electroactive material and offers several advantages including simplicity, efficiency, low‐temperature, and low‐cost. The as‐prepared MnO₂–graphene and CNT–graphene electrodes exhibit high specific capacitances and rate capability. By using polymer gel electrolytes, a flexible all‐solid‐state asymmetric supercapacitor was synthesized with MnO₂–graphene foam as the positive electrode and CNT‐graphene as the negative electrode. The asymmetric supercapacitors can be cycled reversibly in a high‐voltage region of 0 to 1.8 V and exhibit high energy density, remarkable rate capability, reasonable cycling performance, and excellent flexibility.     

A graphene oxide based biosensor for microcystins detection by fluorescence resonance energy transfer

Water safety is one of the most pervasive problems afflicting people throughout the world. Microcystin, a hepatotoxin produced by cyanobacteria, poses a growing and serious threat of water safety. According to World Health Organization (WHO), the limit of content of microcystin-LR (MC-LR) in drinking water is as low as 1μg/L; it is thus necessary to explore a sensitive method for the trace detection of microcystins (MCs). Based on the observation of gold nanoparticles (Au NPs) induced graphene oxide (GO) fluorescence quenching, a reliable biosensor was developed here for microcystins detection. MCs could be attached on Au NPs through the interaction with single strand-DNA (ss-DNA) modified on Au NPs, which formed Au-DNA-MCs complexes. These MCs in the complexes could be immunologically recognized by the antibodies adsorbed on GO sheets, as a result, Au NPs were close enough to quench the photoluminescence of GO by the fluorescence resonance energy transfer (FRET). The fluorescence intensity decreased with the increase of MCs as more Au NPs linked onto GO surface. The limit of detection was 0.5 and 0.3μg/L for microcystin-LR and microcystin-RR (MC-RR), respectively, which satisfies the strictest standard of WHO. Well defined results were also obtained in natural lake water and the specificity experiment. The antibody used here could recognize Adda group, the conservative part of MCs, which allowed the biosensor to detect both single toxin and the total content of MCs existing in the water sample.     

Layer-by-layer assembly of multilayer films composed of avidin and biotin-labeled antibody for immunosensing

Protein multilayers composed of avidin and biotin-labeled antibody (bio-Ab) were prepared on gold surface by layer-by-layer assembly technology using the high specific binding constant (K(a): approximately 10(15) M(-1)) between avidin and biotin. The assembly process of the multilayer films was monitored by using real-time BIA technique based on surface plasmon resonance (SPR). The multilayer films were also characterized by electrochemical impedance spectroscopy (EIS) and reflection absorption Fourier transform infrared spectroscopy (FTIR). The results indicate that the growth of the multilayer is uniform. From response of SPR for each layer, the stoichiometry S for the interaction between avidin and bio-Ab is calculated to be 0.37 in the multilayer whereas 0.82 in the first layer. The protein mass concentration for each layer was also obtained. The schematic figure for the multilayer assembly was proposed according to the layer mass concentration and S value. The utility of the mutilayer films for immunosensing has been investigated via their subsequent interaction with hIgG. The binding ability of the multilayer increased for one to three layers of antibody, and then reach saturation after the fourth layer. These layer-by-layer constructed antibody multilayers enhance the binding ability than covalently immobilized monolayer antibody. This technology can be also used for construction of other thin films for immunosensing and biosensor.     

High‐Surface‐Area Porous Platinum Electrodes for Enhanced Charge Transfer

Cobalt‐based electrolytes are highly tunable and have pushed the limits of dye‐sensitized solar cells, enabling higher open‐circuit voltages and new record efficiencies. However, the performance of these electrolytes and a range of other electrolytes suffer from slow electron transfer at platinum counter electrodes. High surface area platinum would enhance catalysis, but pure platinum structures are too expensive in practice. Here, a material‐efficient host‐guest architecture is developed that uses an ultrathin layer of platinum deposited upon an electrically conductive scaffold, niobium‐doped tin oxide (NTO). This nanostructured composite enhances the counter electrode performance of dye‐sensitized solar cells (DSCs) using a Co^(II/III)BPY₃ electrolyte with an increased fill factor and power conversion efficiency (11.26%), compared to analogous flat films. The modular strategy is elaborated by integrating a light scattering layer onto the counter electrode to reflect unabsorbed light back to the photoanode to improve the short‐circuit current density and power conversion efficiency.     

Ordered Hexagonal Nanoplasmonic Au Nanoparticle Arrays: AAO-Assisted Thermal Treatment Synthesis and Application as Surface-Enhanced Raman Scattering Substrates

We have reported on the synthesis of ordered hexagonal Au nanoparticle (NPs) arrays by anodic alumina oxide templates (AAO)-assisted thermal treatment. This simple process has led to the formation of an ordered hexagonal array of Au NPs on the surface of AAO. SERS properties of the ordered hexagonal Au NPs could be obtained by varying the size of Au NPs. Compared with the Au thin film on AAO, the SERS intensity of rhodamine adsorbed on the ordered hexagonal Au NPs was about 1000 times stronger. And the hexagonal Au NPs array films have had stronger Raman-enhanced signal compared to the disorder Au NPs films. Simulations according to the three-dimensional finite-difference time domain (3D-FDTD) have displayed that these electric field enhancements of the ordered hexagonal Au NPs are strongly dependent on the gap distance. Plasmonic ordered hexagonal Au NPs could provide us new platforms to realize novel optoelectronic devices.

     

Enhanced resistance of polyelectrolyte multilayer microcapsules to pepsin erosion and release properties of encapsulated indomethacin

Polyelectrolyte multilayer films were prepared through layer-by-layer (LbL) self-assembly using polysaccharide sodium alginate (ALG) and chitosan (CHI). After incubation in an enzyme pepsin solution, the multilayer film was partially destroyed as detected by the decrease in fluorescent intensity because of the enzymatic degradation of CHI. The enzymatic desorption was also observed from the microcapsule wall made of the ALG/CHI multilayer film directly deposited on indomethacin (IDM) microcrystals through LbL self-assembly. After pepsin erosion, the IDM release from the microcapsules monitored by UV absorbance was obviously accelerated because of desorption. To enhance the stability of the ALG/CHI multilayer film to the enzymatic erosion, some physical and chemical methods were established to increase film thickness or to cross-link the polysaccharides within the film. Increasing the layer number and raising the deposition temperature effectively slowed down the enzymatic desorption and release rate. Especially, increasing deposition temperature was more effective because of producing a more perfect structure in the ALG/CHI multilayer film. Cross-linking the neighboring layers of ALG and CHI with 1-ethyl-3-(3-dimethylamino-propyl)carbodiimide in the ALG/CHI multilayer film significantly reduced the enzymatic desorption and release rate. Therefore, increasing deposition temperature and cross-linking neighboring layers are effective methods to protect the multilayer film fabricated using LbL assembly from the enzymatic erosion and to prolong the release of the encapsulated drug.     

Free‐Standing 3D Nanoporous Duct‐Like and Hierarchical Nanoporous Graphene Films for Micron‐Level Flexible Solid‐State Asymmetric Supercapacitors

High energy density and power density within a limited volume of flexible solid‐state supercapacitors are highly desirable for practical applications. Here, free‐standing high‐quality 3D nanoporous duct‐like graphene (3D‐DG) films are fabricated with high flexibility and robustness as the backbones to deposit flower‐like MnO₂ nanosheets (3D‐DG@MnO₂). The 3D‐DG is the ideal support for the deposition of large amount of active materials because of its large surface area, appropriate pore structure, and negligible volume compared with other kinds of carbon backbones. Moreover, the 3D‐DG preserve the distinctive 2D coherent electronic properties of graphene, in which charge carriers move rapidly with a small resistance through the high‐quality and continuous chemical vapor deposition‐grown graphene building blocks, which results in a high rate performance. Marvelously, ultrathin (≈50 μm) flexible solid‐state asymmetric supercapacitors (ASCs) using 3D‐DG@MnO₂ as the positive electrode and 3D hierarchical nanoporous graphene films as the negative electrode display ultrahigh volumetric energy density (28.2 mW h cm^?3) and power density (55.7 W cm^?3) at 2.0 V. Furthermore, as‐prepared ASCs show high cycle stability clearly demonstrating their broad applications as power supplies in wearable electronic devices.     

Surface‐Modified Porous Carbon Nitride Composites as Highly Efficient Electrocatalyst for Zn‐Air Batteries

Porous carbon nitride (PCN) composites are fabricated using a top‐down strategy, followed by additions of graphene and CoS_x nanoparticles. This subsequently enhances conductivity and catalytic activity of PCN (abbreviated as CoS_x@PCN/rGO) and is achieved by one‐step sulfuration of PCN/graphene oxides (GO) composite materials. As a result, the as‐prepared CoS_x@PCN/rGO catalysts display excellent activity and stability toward both oxygen evolution and reduction reactions, surpassing electrocatalytic performance shown by state‐of‐the‐art Pt, RuO₂ and other carbon nitrides. Remarkably, the CoS_x@PCN/rGO bifunctional activity allows for applications in zinc‐air batteries, which show better rechargeability than Pt/C. The enhanced catalytic performance of CoS_x@PCN/rGO can primarily be attributed to the highly porous morphology and sufficiently exposed active sites that are favorable for electrocatalytic reactions.     

Inherent charge-shifting polyelectrolyte multilayer blends: a facile route for tunable protein release from surfaces

Recent research has highlighted degradable multilayer films that enable the programmed release of different therapeutics. Multilayers constructed by the layer-by-layer (LbL) deposition that can undergo disassembly have been demonstrated to be of considerable interest, particularly for biomedical surface coatings due to their versatility and mild aqueous processing conditions, enabling the inclusion of biologic drugs with high activity. In this study, we examine the controlled release of a protein using a different mechanism for film disassembly, the gradual dissociation of film interactions under release conditions. Poly(β-amino ester)s and poly(L-lysine) (PLL) were used as the positively charged multilayer components coassembled with a model negatively charged antigen protein, ovalbumin (Ova). The release of the protein from these multilayer films is dominated by the slow shift in the charge of components under physiological pH conditions rather than by hydrolytic degradative release. The time scale of release can be varied over almost 2 orders of magnitude by varying the ratio of the two polyamines in the deposition solution. The highly versatile and tunable properties of these films form a basis for designing controlled and sequential delivery of drug coatings using a variety of polyions.     

Laser‐Assisted Ultrafast Exfoliation of Black Phosphorus in Liquid with Tunable Thickness for Li‐Ion Batteries

Few‐layer black phosphorus (BP) is an emerging 2D material suitable for energy applications. However, its controllable preparation remains challenging. Herein, a highly efficient route is presented for the scalable production of few‐layered BP nanosheets using a pulsed laser in low‐boiling point solvents. Changing the laser irradiation time, energy, and solvent type leads to precise control over the layer number and lateral size of the nanosheets with a narrow distribution. The process is understood by a plasma quenching mechanism and interlayer interaction weakened by the in situ generated vapor bubbles. The excellent control of the BP nanosheets enables morphological effects on Li‐ion battery performance to be studied. Low layer numbers benefit both charge transfer and Li⁺ ion diffusion, while a high aspect ratio can not only improve the charge transfer but also increase the Li⁺ ion diffusion path. This study delivers insights on the tailored fabrication of thin 2D materials using lasers for morphology‐dependent electrochemical energy conversion and storage.