Making a Cool Choice: The Materials Library of Magnetic Refrigeration

The phase‐down scenario of conventional refrigerants used in gas–vapor compressors and the demand for environmentally friendly and efficient cooling make the search for alternative technologies more important than ever. Magnetic refrigeration utilizing the magnetocaloric effect of magnetic materials could be that alternative. However, there are still several challenges to be overcome before having devices that are competitive with those based on the conventional gas–vapor technology. In this paper a rigorous assessment of the most relevant examples of 14 different magnetocaloric material families is presented and those are compared in terms of their adiabatic temperature and isothermal entropy change under cycling in magnetic‐field changes of 1 and 2 T, criticality aspects, and the amount of heat that they can transfer per cycle. The work is based on magnetic, direct thermometric, and calorimetric measurements made under similar conditions and in the same devices. Such a wide‐ranging study has not been carried out before. This data sets the basis for more advanced modeling and machine learning approaches in the near future.     

High‐Performance Thermoelectric Paper Based on Double Carrier‐Filtering Processes at Nanowire Heterojunctions

As commercial interest in flexible power‐conversion devices increases, the demand for high‐performance alternatives to brittle inorganic thermoelectric (TE) materials is growing. As an alternative, we propose a rationally designed graphene/polymer/inorganic nanocrystal free‐standing paper with high TE performance, high flexibility, and mechanical/chemical durability. The ternary hybrid system of the graphene/polymer/inorganic nanocrystal includes two hetero­junctions that induce double‐carrier filtering, which significantly increases the electrical conductivity without a major decrease in the thermopower. The ternary hybrid shows a power factor of 143 μW m^?1 K^?1 at 300 K, which is one to two orders of magnitude higher than those of single‐ or binary‐component materials. In addition, with five hybrid papers and polyethyleneimine (PEI)‐doped single‐walled carbon nanotubes (SWCNTs) as the p‐type and n‐type TE units, respectively, a maximum power density of 650 nW cm^?2 at a temperature difference of 50 K can be obtained. The strategy proposed here can improve the performance of flexible TE materials by introducing more heterojunctions and optimizing carrier transfer at those junctions, and shows great potential for the preparation of flexible or wearable power‐conversion devices.     

A Simple Electrochemical Route to Access Amorphous Mixed‐Metal Hydroxides for Supercapacitor Electrode Materials

Supercapacitors or electrochemical capacitors, as energy storage devices, require very stable positive electrode materials for useful applications. Although most positive electrodes are based on crystalline mixed‐metal hydroxides, their pseudocapacitors usually perform poorly or have a short cycle life. High activities can be achieved with amorphous phases. Methods to produce amorphous materials are also not typically amenable towards mixed‐metal compositions. It is demonstrated that electrochemistry in an ambient environment can be used to produce a series of amorphous mixed‐metal hydroxides with a homogeneous distribution of metals for use as positive electrode materials in a supercapacitor. The integrated performance of the amorphous ternary mixed‐metal hydroxide pseudocapacitor is superior to that of crystalline materials. The amorphous Ni‐Co‐Fe hydroxide supercapacitor is characterized by a long‐term cycling stability that retained 94% of its capacity after 20 000 cycles. This is much higher than the cycle life of crystalline devices. These results show the broad applicability of this methodology towards new electrode materials for high‐performance supercapacitors, especially amorphous mixed‐metal hydroxides, as advanced electrode materials.     

High Performance Thermoelectric Materials: Progress and Their Applications

Thermoelectric (TE) materials have the capability of converting heat into electricity, which can improve fuel efficiency, as well as providing robust alternative energy supply in multiple applications by collecting wasted heat, and therefore, assisting in finding new energy solutions. In order to construct high performance TE devices, superior TE materials have to be targeted via various strategies. The development of high performance TE devices can broaden the market of TE application and eventually boost the enthusiasm of TE material research. This review focuses on major novel strategies to achieve high‐performance TE materials and their applications. Manipulating the carrier concentration and band structures of materials are effective in optimizing the electrical transport properties, while nanostructure engineering and defect engineering can greatly reduce the thermal conductivity approaching the amorphous limit. Currently, TE devices are utilized to generate power in remote missions, solar–thermal systems, implantable or/wearable devices, the automotive industry, and many other fields; they are also serving as temperature sensors and controllers or even gas sensors. The future tendency is to synergistically optimize and integrate all the effective factors to further improve the TE performance, so that highly efficient TE materials and devices can be more beneficial to daily lives.     

Engineering Temperature‐Dependent Carrier Concentration in Bulk Composite Materials via Temperature‐Dependent Fermi Level Offset

Precise control of carrier concentration in both bulk and thin‐film materials is crucial for many solid‐state devices, including photovoltaic cells, superconductors, and high mobility transistors. For applications that span a wide temperature range (thermoelectric power generation being a prime example) the optimal carrier concentration varies as a function of temperature. This work presents a modified modulation doping method to engineer the temperature dependence of the carrier concentration by incorporating a nanosize secondary phase that controls the temperature‐dependent doping in the bulk matrix. This study demonstrates this technique by de‐doping the heavily defect‐doped degenerate semiconductor GeTe, thereby enhancing its average power factor by 100% at low temperatures, with no deterioration at high temperatures. This can be a general method to improve the average thermoelectric performance of many other materials.     

Quantifying the Volumetric Performance Metrics of Supercapacitors

Nanostructured materials have greatly improved the performance of electrochemical energy storage devices because of the increased activity and surface area. However, nanomaterials (e.g., nanocarbons) normally possess low packing density, and thus occupy more space which restricts their suitability for making electrochemical devices as compact as possible. This has resulted in their low volumetric performance (capacitance, energy density, and power density), which is a practical obstacle for the application of nanomaterials in mobile and on‐board energy storage devices. While rating electrode materials for supercapacitors, their volumetric performance is equally important as the gravimetric metrics and more reliable in particular for systems with limited space. However, the adopted criteria for measuring the volumetric performance of supercapacitors vary in the literature. Identifying the appropriate performance criteria for the volumetric values will set a universal ground for valid comparison. Here, the authors discuss the rationale for quantifying the volumetric performance metrics of supercapacitors from the three progressive levels of materials, electrodes, and devices. It is hoped that these thoughts will be of value for the general community in energy storage research.     

Recent Progress in the Development of Anode Materials for Solid Oxide Fuel Cells

The field of research into solid oxide fuel cell (SOFC) anode materials has been rapidly moving forward. In the four years since the last in‐depth review significant advancements have been made in the reduction of the operating temperature and improvement of the performance of SOFCs. This progress report examines the developments in the field and looks to draw conclusions and inspiration from this research. A brief introduction is given to the field, followed by an overview of the principal previous materials. A detailed analysis of the developments of the last 4 years is given using a selection of the available literature, concentrating on metal‐fluorite cermets and perovskite‐based materials. This is followed by a consideration of alternate fuels for use in SOFCs and their associated problems and a short discussion on the effect of synthesis method on anode performance. The concluding remarks compile the significant developments in the field along with a consideration of the promise of future research. The recent progress in the development of anode materials for SOFCs based on oxygen ion conducting electrolytes is reviewed.     

Biomimetic MXene Textures with Enhanced Light‐to‐Heat Conversion for Solar Steam Generation and Wearable Thermal Management

2D materials are of particular interest in light‐to‐heat conversion, yet challenges remain in developing a facile method to suppress their light reflection. Herein, inspired by the black scales of Bitis rhinoceros, a generalized approach via sequential thermal actuations to construct biomimetic 2D‐material nanocoatings, including Ti₃C₂T_x MXene, reduced graphene oxide (rGO), and molybdenum disulfide (MoS₂) is designed. The hierarchical MXene nanocoatings result in broadband light absorption (up to 93.2%), theoretically validated by optical modeling and simulations, and realize improved light‐to‐heat performance (equilibrium temperature of 65.4 °C under one‐sun illumination). With efficient light‐to‐heat conversion, the bioinspired MXene nanocoatings are next incorporated into solar steam‐generation devices and stretchable solar/electric dual‐heaters. The MXene steam‐generation devices require much lower solar‐thermal material loading (0.32 mg cm^?2) and still guarantee high steam‐generation performance (1.33 kg m^?2 h^?1) compared with other state‐of‐the‐art devices. Additionally, the mechanically deformed MXene structures enable the fabrication of stretchable and wearable heaters dual‐powered by sunlight and electricity, which are reversibly stretched and heated above 100 °C. This simple fabrication process with effective utilization of active materials promises its practical application value for multiple solar–thermal technologies.     

Liquid–Solid Interfacial Assemblies of Soft Materials for Functional Freestanding Layered Membrane–Based Devices toward Electrochemical Energy Systems

Freestanding layered membrane–based devices have broad applications in highly efficient energy‐storage/conversion systems. The liquid–solid interface is considered as a unique yet versatile interface for constructing such layered membrane–based devices. In this review, the authors outline recent developments in the fabrication of soft materials to functionalize layered devices from the aspect of liquid–solid interfacial assembly and engineering arts. Seven liquid–solid interfacial assembly strategies, including flow‐directed, superlattice, solvent‐casting, evaporation‐induced, dip‐coating, spinning, and electrospinning assemblies, are comprehensively highlighted with a focus on their synthetic pathways, formation mechanisms, and interface engineering strategies. Meanwhile, recent representative works on layered membrane–based devices for electrochemical energy applications are presented. Finally, challenges and opportunities of this research area are highlighted in order to stimulate future developments. This review not only offers comprehensive and practical approaches to assemble liquid–solid interfaces with soft materials for various important layered electrochemical energy devices but also sheds lights on fundamental insights by thoughtful discussions on performance enhancement mechanisms of these electrochemical energy systems.     

Fast Charging Materials for High Power Applications

An overview of fast charging materials for high power applications is given. The behavior at high current density of several anodic and cathodic materials that have been utilized in lithium‐, sodium‐, and potassium‐ion batteries is considered. Furthermore, the behavior of capacitive and pseudocapacitive materials suitable for electrochemical capacitors and, also, of those that have been utilized for the realization of hybrid‐ion capacitors, which are nowadays an interesting reality in the field of high power devices, is discussed. The advantages and limitations of all these materials are critically analyzed with the aim of understanding their impact on real devices. On the basis of this analysis, the most important aspects are identified, which should be addressed in the future for the realization of advanced high power devices.     

Molecular Engineering of Copper Phthalocyanines: A Strategy in Developing Dopant‐Free Hole‐Transporting Materials for Efficient and Ambient‐Stable Perovskite Solar Cells

Copper (II) phthalocyanines (CuPcs) have attracted growing interest as promising hole‐transporting materials (HTMs) in perovskite solar cells (PSCs) due to their low‐cost and excellent stability. However, the most efficient PSCs using CuPc‐based HTMs reported thus far still rely on hygroscopic p‐type dopants, which notoriously deteriorate device stability. Herein, two new CuPc derivatives are designed, namely CuPc‐Bu and CuPc‐OBu, by molecular engineering of the non‐peripheral substituents of the Pc rings, and applied as dopant‐free HTMs in PSCs. Remarkably, a small structural change from butyl groups to butoxy groups in the substituents of the Pc rings significantly influences the molecular ordering and effectively improves the hole mobility and solar cell performance. As a consequence, PSCs based on dopant‐free CuPc‐OBu as HTMs deliver an impressive power conversion efficiency (PCE) of up to 17.6% under one sun illumination, which is considerably higher than that of devices with CuPc‐Bu (14.3%). Moreover, PSCs containing dopant‐free CuPc‐OBu HTMs show a markedly improved ambient stability when stored without encapsulation under ambient conditions with a relative humidity of 85% compared to devices containing doped Spiro‐OMeTAD. This work thus provides a fundamental strategy for the future design of cost‐effective and stable HTMs for PSCs and other optoelectronic devices.     

Integration: An Effective Strategy to Develop Multifunctional Energy Storage Devices

Energy storage devices are arousing increasing interest due to their key role in next‐generation electronics. Integration is widely explored as a general and effective strategy aiming at high performances. Recent progress in integrating a variety of functions into electrochemical energy storage devices is carefully described. Through integration at the level of materials: flexible, stretchable, responsive, and self‐healing devices are discussed to highlight the state‐of‐the‐art multi‐functional electronics. Through the integration at the level of devices, the incorporation of photovoltaic and piezoelectric devices is detailed to reflect the advances in self‐powering electronics. Integrated energy storage devices are presented for wearable applications to indicate a new growth direction. The main challenges and important directions are summarized to offer some useful clues for future development.     

Advanced Electrode Materials Comprising of Structure‐Engineered Quantum Dots for High‐Performance Asymmetric Micro‐Supercapacitors

Micro‐supercapacitors (MSCs) as a new class of energy storage devices have attracted great attention due to their unique merits. However, the narrow operating voltage, slow frequency response, and relatively low energy density of MSCs are still insufficient. Therefore, an effective strategy to improve their electrochemical performance by innovating upon the design from various aspects remains a huge challenge. Here, surface and structural engineering by downsizing to quantum dot scale, doping heteroatoms, creating more structural defects, and introducing rich functional groups to two dimensional (2D) materials is employed to tailor their physicochemical properties. The resulting nitrogen‐doped graphene quantum dots (N‐GQDs) and molybdenum disulfide quantum dots (MoS₂‐QDs) show outstanding electrochemical performance as negative and positive electrode materials, respectively. Importantly, the obtained N‐GQDs//MoS₂‐QDs asymmetric MSCs device exhibits a large operating voltage up to 1.5 V (far exceeding that of most reported MSCs), an ultrafast frequency response (with a short time constant of 0.087 ms), a high energy density of 0.55 mWh cm^?3, and long‐term cycling stability. This work not only provides a novel concept for the design of MSCs with enhanced performance but also may have broad application in other energy storage and conversion devices based on QDs materials.     

Advanced Phosphorus‐Based Materials for Lithium/Sodium‐Ion Batteries: Recent Developments and Future Perspectives

High‐performance and lost‐cost lithium‐ion and sodium‐ion batteries are highly desirable for a wide range of applications including portable electronic devices, transportation (e.g., electric vehicles, hybrid vehicles, etc.), and renewable energy storage systems. Great research efforts have been devoted to developing alternative anode materials with superior electrochemical properties since the anode materials used are closely related to the capacity and safety characteristics of the batteries. With the theoretical capacity of 2596 mA h g^?1, phosphorus is considered to be the highest capacity anode material for sodium‐ion batteries and one of the most attractive anode materials for lithium‐ion batteries. This work provides a comprehensive study on the most recent advancements in the rational design of phosphorus‐based anode materials for both lithium‐ion and sodium‐ion batteries. The currently available approaches to phosphorus‐based composites along with their merits and challenges are summarized and discussed. Furthermore, some present underpinning issues and future prospects for the further development of advanced phosphorus‐based materials for energy storage/conversion systems are discussed.     

Opening Two‐Dimensional Materials for Energy Conversion and Storage: A Concept

The development of two‐dimensional (2D) materials is experiencing a renaissance since the adventure of graphene. 2D materials typically exhibit strong in‐plane covalent bonding and weak out‐of‐plane van der Waals interactions through the interlayer gap. Opening 2D materials is an effective way to alter the physical and chemical properties, such as band gap, conductivity, optical property, thermoelectric property, photovoltaic property and superconductivity. A larger interlayer distance means more accessible active sites for catalysis, an ion‐accessible surface in the interlayer space, which may greatly enhance the performance of 2D materials for energy conversion and storage. Moreover, opening 2D materials by intercalation can change the band filling state and the Fermi level. This review mainly focuses on the opening of 2D materials and their subsequent applications in energy conversion and storage fields, expecting to promote the development of such a new class of materials, namely expanded 2D materials. The exciting progresses of these expanded materials made in both energy conversion and storage devices including solar cells, thermoelectric devices, electrocatalyst, supercapacitors and rechargeable batteries, is presented and discussed in depth. Furthermore, prospects and further developments in these exciting fields of the expanded 2D materials are also commented.     

Emerging Conductive Atomic Force Microscopy for Metal Halide Perovskite Materials and Solar Cells

Metal halide perovskite materials, benefiting from a combination of outstanding optoelectronic properties and low‐cost solution‐preparation processes, show tremendous potential for optoelectronics and photovoltaics. However, the nanoscale inhomogeneities of the electronic properties of perovskite materials cause a number of difficulties, such as recombination, stability, and hysteresis, all of which seriously restrict device performance. Scanning probe microscopy, as a high‐resolution imaging technique, has been widely used to connect local properties and micro‐area morphologies to overall device performance. Conductive atomic force microscopy (C‐AFM) can realize a real‐space visualization of topography coupled with optoelectronic properties on a microscopic scale and thereby is uniquely suited to probe the local effects of perovskite materials and devices. The fundamental principles, alternative operation modes, and development of C‐AFM are comprehensively reviewed, and applications in perovskite solar cells (PSCs) for electronic transport behavior, ion migration and hysteresis, ferroelectric polarization, and facet orientation investigation are discussed. A comprehensive understanding and summary of up‐to‐date applications in PSCs is beneficial to further fully exploit the potential of such an emerging technique, so as to provide a novel and effective approach for perovskite materials analysis.     

Energy Applications of Magnetocaloric Materials

The need for energy‐efficient and environmentally friendly refrigeration, heat pumping, air conditioning, and thermal energy harvesting systems is currently more urgent than ever. Magnetocaloric energy conversion is among the best available alternatives for achieving these technological goals and has been the subject of substantial basic and applied research over the last two decades. The subject is strongly interdisciplinary, requiring proper understanding and efficient integration of knowledge in different specialized fields. This review article presents a historical and up‐to‐date account of the energy‐related applications of magnetocaloric materials and information about their processing and magnetic fields, thermodynamics, heat transfer, and other relevant characteristics. The article also discusses the conceptual design of magnetocaloric refrigeration and power generation systems and some guidelines for future research in the field.     

Porous Electrode Materials for Lithium‐Ion Batteries – How to Prepare Them and What Makes Them Special

Numerous benefits of porous electrode materials for lithium ion batteries (LIBs) have been demonstrated, including examples of higher rate capabilities, better cycle lives, and sometimes greater gravimetric capacities at a given rate compared to nonporous bulk materials. These properties promise advantages of porous electrode materials for LIBs in electric and hybrid electric vehicles, portable electronic devices, and stationary electrical energy storage. This review highlights methods of synthesizing porous electrode materials by templating and template‐free methods and discusses how the structural features of porous electrodes influence their electrochemical properties. A section on electrochemical properties of porous electrodes provides examples that illustrate the influence of pore and wall architecture and interconnectivity, surface area, particle morphology, and nanocomposite formation on the utilization of the electrode materials, specific capacities, rate capabilities, and structural stability during lithiation and delithiation processes. Recent applications of porous solids as components for three‐dimensionally interpenetrating battery architectures are also described.     

Controllable ZnMgO Electron‐Transporting Layers for Long‐Term Stable Organic Solar Cells with 8.06% Efficiency after One‐Year Storage

Currently, one main challenge in organic solar cells (OSCs) is to achieve both good stability and high power conversion efficiencies (PCEs). Here, highly efficient and long‐term stable inverted OSCs are fabricated by combining controllable ZnMgO (ZMO) cathode interfacial materials with a polymer:fullerene bulk‐heterojunction. The resulting devices based on the nanocolloid/nanoridge ZMO electron‐transporting layers (ETLs) show greatly enhanced performance compared to that of the conventional devices or control devices without ZMO or with ZnO ETLs. The ZMO‐based OSCs maintain 84%–93% of their original PCEs over 1‐year storage under ambient conditions. An initial PCE of 9.39% is achieved for the best device, and it still retains a high PCE of 8.06% after 1‐year storage, which represents a record high value for long‐term stable OSCs. The excellent performance is attributed to the enhanced electron transportation/collection, reduced interfacial energy losses, and improved stability of the nanocolloid ZMO ETL. These findings provide a promising way to develop OSCs with high efficiencies and long device lifetime towards practical applications.     

From Ionogels to Biredox Ionic Liquids: Some Emerging Opportunities for Electrochemical Energy Storage and Conversion Devices

Ionic liquids (ILs) continue to receive attention for applications in electrochemistry because of their unique properties as charge carriers (electrolytes) and redox shuttles (solar cells) and their ability to promote energy storage either electrostatically (supercapacitors) or chemically (secondary batteries). More specifically, the confinement of ILs in nanopores or the adsorption at surfaces, are considered a promising strategy for all solid‐state energy storage and conversion devices. Upon such immobilization, one benefits from the specific properties of ILs (large electrochemical window, relatively high ionic conductivity, task‐specific functionalities, etc.) combined with surface and confinement effects that can be tuned by playing with the porosity and chemical nature of the host. Here, some emerging applications of ILs in electrochemistry are first discussed: silica‐based ionogels as solid electrolytes and systems that involve carbon host substrates, as typical electrode materials in electrical double layer capacitors and lithium secondary batteries. Also, a non‐exhaustive, yet a comprehensive picture of the confinement and surface effects at play in such applications is presented. Then, the confinement of task‐specific ILs such as protonic ILs, IL lithium salts, and biredox ILs, is discussed, which paves the way for promising perspectives. Finally, some concluding remarks are reported and directions for future work are suggested.