Study of the incompatibility and replication of the 70-kb virulence plasmid of Yersinia

The 70-kb virulence plasmid, vir, from four Yersinia enterocolitica and one Y. pseudotuberculosis strains are incompatible with IncFI plasmids FLac and R386 while they are compatible with plasmids representing nine other incompatibility groups. Hybridization experiments carried out on one of these virulence plasmids showed that it contains the F incompatibility determinant D, incD. This determinant was cloned onto pACYC184 and the recombinant clone expressed incompatibility with FLac. We conclude that the incompatibility observed between F or R386 and the 70-kb virulence plasmid of Y. enterocolitica and Y. pseudotuberculosis is mediated by incD. Replication genes (rep) from the same plasmid were cloned independently in Escherichia coli. Rep and incD map on two different BamHI fragments. Surprisingly, the replicon isolated is not sensitive to inc D incompatibility. Apart from incD, vir and F share extremely little homology. In particular, there is no evidence for the presence of an F-like transfer operon on vir.     

Plasmid replication functions: two distinct segments of plasmid R1, RepA and RepD, express incompatibility and are capable of autonomous replication.

The genetic determinants for replication and incompatibility of plasmid R1 were investigated by gene cloning methods, and three types of R1 miniplasmid derivatives were generated. The first, exemplified by plasmid pKT300, consisted of a single BglII endonuclease-generated deoxyribonucleic acid fragment derived from the R1 region that is located between the determinants for conjugal transfer and antibiotic resistance. Two types of miniplasmids could be formed from PstI endonuclease-generated fragments of pKT300. One of these, which is equivalent to miniplasmids previously generated from plasmids R1-19 and R1-19B2, consisted of two adjacent PstI fragments that encode the RepA replication system of plasmid R1. The other type contained a segment of R1, designated the RepD replication region, that is adjacent to the RepA region and that has not been identified previously as having the capacity for autonomous replication. Plasmid R1, therefore, contained two distinct deoxyribonucleic acid segments capable of autonomous replication. The RepA-RepD miniplasmid pKT300 had a copy number about eightfold higher than that of R1 and hence lacked a determinant for the regulation of plasmid copy number. Like R1, it was maintained stably in dividing bacteria. RepA miniplasmids had copy numbers which were two- to fourfold higher than that of R1 (i.e., which were lower than that of pKT300) and were maintained slightly less stably than those of pKT300 and R1. The RepD miniplasmid was not maintained stably in dividing bacteria. Previous experiments have shown that incompatibility of IncFII group plasmids is specified by a plasmid copy control gene. Despite the fact that RepA miniplasmids of R1 were defective in copy control, they nevertheless expressed incompatibility. This suggests that two genes are responsible for plasmid copy control, one that specifies incompatibility and is located on RepA miniplasmids and another that is located outside of, but adjacent to, the RepA replication region. Hybrid plasmids composed of pBR322 and one PstI fragment from the RepA region, P-8, exhibited incompatibility towards R2 and RepA miniplasmids but not the RepD miniplasmid, whereas hybrids composed of pBR322 and the PstI fragment of the RepD region, P-3, exhibited incompatibility towards R1 and the RepD miniplasmid but not RepA miniplasmids. These results indicate that the two replication systems are functionally distinct and that, although the RepA system is the principal replication system of R1, the RepD system also plays a role in the maintenance of this plasmid.     

Incompatibility between Flac, R386, and F:pSC101 recombinant plasmids: the specificity of F incompatibility genes.

The specificity of F incompatibility genes (inc⁺) has been studied with the Flac and R386 plasmids, members of the IncFI incompatibility group. Recently, two inc⁺ regions, incA (46.4–49.3F) and incB (43.1–46.4F) were identified by cloning these F sequences onto pSC101 and subsequently demonstrating incompatibility of the recombinants with Flac. It is shown here that the FincA⁺ recombinant is incompatible with both Flac and R386 while the FincB⁺ recombinant is incompatible only with Flac. Also, a plasmid mutant is described that has reduced incompatibility against Flac and R386. The mutation is located on the BamHI restriction fragment that contains the FincA region. These genetic findings are consistent with the deduction of Palchaudhuri and Maas, based on heteroduplex analysis of IncFI plasmids, that placed the IncFI determinant in the 46.4–48.6F region. The findings also indicate that the FincB⁺ gene product, which has been implicated in negative control of F copy number, is specific for the F replicon.     

Maintenance of the bacteriocinogenic plasmid Clo DF13 in Escherichia coli cells. I. Localisation and mutual interactions of four Clo DF13 incompatibility regions

Summary The incompatibility properties of the bacteriocinogenic plasmid Clo DF13 have been examined. By using Clo DF13, Clo DF13 deletion, and transposon insertion mutants as well as compatible R plasmids into which Clo DF13 fragments have been cloned, we could identify and localise four different incompatibility regions on the Clo DF13 genome. These regions, designated incA, incB, incC, and incD are located in the following positions: incA about incD between 1.8% and 9% of the Clo DF13 genome. We studied the contribution of each of the four inc regions, separately and/or in combination with each other, to the incompatibility between two plasmid replicons. Two types of incompatibility can be distinguished: Type I evoked by incD, that overlaps the replication control area of Clo DF13 and type II, caused by incA, B and C. From our observations we present a model for plasmid incompatibility based on a combination of the existing repressor dilution and membrane attachment models.     

F plasmid incompatibility and copy number genes: Their map locations and interactions

The genes coding for vegetative F plasmid replication, replication control, and incompatibility are known to map between the kilobase coordinates 40.3 and 49.3 (abbreviated 40.3–49.3F). We have subdivided this region of the F genome by a combination of in vivo and in vitro genetic techniques and have constructed F:pSC101 hybrid plasmids which contain the F DNA sequences having the approximate coordinates 41–43, 43–46, and 46–49F. We find that hybrids with regions 43–46 and 46–49F are incompatible with an F′lac⁺ plasmid while the hybrid with the region 41–43F is compatible. We have also constructed similar F:pSC101 hybrid plasmids with the regions 43–46 and 46–49F derived from mini-F plasmid copy number mutants. We find that hybrids made from three independent F copy number mutants show a loss of the incompatibility function associated with the 43–46F region and retention of the incompatibility function associated with 46–49F region. Moreover, spontaneous revertants, selected for regain of the 43–46F incompatibility function, have also regained normal control over their copy numbers. We also find that copy number mutations map in the 43–46F region. From our results we conclude (i) that F contains at least two inc⁺ loci, designated incA⁺ (46–49F) and incB⁺ (43–46F), and (ii) that gene(s) regulating F copy number may be related to the incB⁺ gene(s).     

ParI,an orphan ParA family protein from Pseudomonas putida KT2440‐specific genomic island,interferes with the partition system of IncP‐7 plasmids

Pseudomonas putida KT2440 is an ideal soil bacterium for expanding the range of degradable compounds via the recruitment of various catabolic plasmids. In the course of our investigation of the host range of IncP‐7 catabolic plasmids pCAR1, pDK1 and pWW53, we found that the IncP‐7 miniplasmids composed of replication and partition loci were exceptionally unstable in KT2440, which is the authentic host of the archetypal IncP‐9 plasmid pWW0. This study identified ParI, a homologue of ParA family of plasmid partitioning proteins encoded on the KT2440‐specific cryptic genomic island, as a negative host factor for the maintenance of IncP‐7 plasmids. The miniplasmids were destabilized by ectopic expression of ParI, and the loss rate correlated with the copy number of ParB binding sites in the centromeric parS region. Mutations in the conserved ATPase domains of ParI abolished destabilization of miniplasmids. Furthermore, ParI destabilized miniplasmid derivatives carrying the partition‐deficient parA mutations but failed to impact the stability of miniplasmid derivatives with parB mutations in the putative arginine finger. Altogether, these results indicate that ParI interferes with the IncP‐7 plasmid partition system. This study extends canonical partition‐mediated incompatibility of plasmids beyond heterogeneous mobile genetic elements, namely incompatibility between plasmid and genomic island.     

Cloning and characterization of EcoRI and HindIII restriction endonuclease-generated fragments of antibiotic resistance plasmids R6-5 and R6

Summary DNA fragments generated by the EcoRI or HindIII endonucleases from the low copy number antibiotic resistance plasmids R6 and R6-5 were separately cloned using the high copy number ColEl or pML21 plasmid vectors and the insertional inactivation procedure. The hybrid plasmids that were obtained were used to determine the location of the EcoRI and HindIII cleavage sites on the parent plasmid genomes by means of electron microscope heteroduplex analysis and agarose gel electrophoresis. Ultracentrifugation of the cloned fragments in caesium chloride gradients localized the high buoyant density regions of R6-5 to fragments that carry the genes for resistance to streptomycin-spectinomycin, sulfonamide, and mercury and a low buoyant density region to fragments that carry the tetracycline resistance determinant. Functional analysis of hybrid plasmids localized a number of plasmid properties such as resistances to antibiotics and mercury and several replication functions to specific regions of the R6-5 genome. Precise localisation of the genes for resistance to chloramphenicol, kanamycin, fusidic acid and tetracycline was possible due to the presence of identified restriction endonuclease cleavage sites within these determinants.Only one region competent for autonomous replication was identified on the R6-5 plasmid genome and this was localized to EcoRI fragment 2 and HindIII fragment 1. However, two additional regions of replication activity designated RepB and RepC, themselves incapable of autonomous replication but capable of supporting replication of a linked ColE1 plasmid in polA^– bacteria, were also identified.     

ColE1 plasmid mobility: Essential and conditional functions

Summary Sequences essential for the conjugal transfer of ColE1 can be divided into a cis-acting site and a region encoding trans-acting products. Each of these was successively cloned into a non-transmissible plasmid vector. The resulting chimera was transmissible by the conjugative plasmids F'lac,pro (incFI) and R64drd11 (incI). The sequences encoding colicin E1, immunity, and incompatibility were absent from this chimera: therefore they are not essential for the conjugal transmission of the ColE1 plasmid.In contrast to ColE1, however, the same chimera was deficient in conjugal transfer initiated by R751 (incP) and R388 (incW). This suggests that ColEl sequences other than those cloned in the chimeric plasmid are necessary for its mobilization by R751 and R388. Three such regions were revealed by screening a series of ColE1 insertion mutants for transfer by R751 and R388. Two of these regions encode no other known function while the third is encoded by a region which overlaps the gene for colicin E1 itself.     

IncD, a genetic locus in F responsible for incompatibility with several plasmids of the IncFI group

Summary Cloning of mini-F DNA segments has led to the identification and mapping of a locus, incD, involved in incompatibility reactions with many IncFI plasmids. The cloned incD locus expressed incompatibility with F, R386, and six other IncFI plasmids but not with ColV3-K30 or pHH507 which lack sequence homology with the incD region. A sequence of 360 bp (48.66–49.02 FKB) was found to be sufficient for expression of incD incompatibility. Multicopy vectors containing incD are compatible with each other, but can be displaced by mini-F plasmids deleted for incD. These results indicate that incD-mediated incompatibility reactions require the presence of replication genes to which incD is normally linked. The degree of incompatibility exercised by incD is moderate compared with that of other inc loci in F, suggesting that incD is involved in an aspect of plasmid maintennce, such as partition, different from the functions of the other inc loci.     

Mapping of RP4 plasmid using deletion mutants of pAS8 hybrid (RP4-ColE1)

Summary We used the hybrid plasmid pAS8 in order to conduct the genetic analysis of RP4 plasmid. The presence of two replicons in the hybrid plasmid permitted to expand the spectrum of deletion mutants of RP4 isolated, which are capable to autonomous replication. The shortening of the hybrid plasmid was achieved by P22 transduction, by induction of deletion mutants using mitomycin C, as well as by selection of Tra^- mutants on the basis of resistance of cells to P-specific phages. These techniques have lead to isolation of clones possessing different combinations of plasmid resistance determinants.Comparison of phenotypic characteristics of deletion plasmids pAS9, pAS10, pAS11, pAS12 and pAS10-2 permitted to propose the map for pAS8 plasmid with the following sequence of markers: trakan-ColE1-amp-tet...Heteroduplex analysis of deletion mutants of pAS8 permitted to construct a physical map and to elaborate in greater detail the functional map of RP4 plasmid. The correlation between the ability of mutants to replicate in polA (TS) strain at nonpermissive conditions and the length of the deleted segment permitted to map rep genes of RP4 on a region with coordinates 9.8–17.3 kb. A relationship between the manifestation of incompatibility of mutants with Inc P-1 plasmids and the length of deletions points out that inc genes are located on DNA region with coordinates 2.1–9.8 kb. The analysis of replication of deletion mutants and the manifestation of incompatibility just as of the data about the size of appropriate deletions permitted to make the conclusion about the functional and genetic independence of the replication control and incompatibility control in RP4 plasmid.     

Determination and in vivo characterization of the basic replicon of natural plasmids of Methylomonas clara

The basic replicon of the endogenous Methylomonas clara plasmid pBE-2 and its derivatives was defined to a region of 2.7 kb by in vivo deletions and conjugative transfer experiments using Escherichia coli-M. clara hybrid plasmids. Origin activity was found to be confined to a maximal length of 1.3 kb. The origin consists of two fragments which can be separated more than 4 kb by the integration of foreign DNA fragments without loss of function. A fragment having a maximum size of 2.1 kb supports in trans replication initiation at the origin. In addition, two incompatibility determinants were revealed, one localized in the origin fragment and the other outside the origin. Incompatibility between two basic replicons of the natural M. clara plasmids can be overcome by the integration of one of them in the compatible IncP plasmid R68-Km^s. No homology was found between the plasmid basic replicon and the chromosomal DNA of M. clara.     

Replication and incompatibility properties of segments of the origin region of replication of the broad host range plasmid RK2

Summary Replication and incompatibility properties in Escherichia coli of DNA segments from the replication origin region of plasmid RK2 have been investigated. A 393 bp HpaII fragment, derived from the region of the RK2 origin of replication, carries an active origin when essential RK2 encoded functions are provided in trans and will form a mini RK2 replicon when linked to a non-replicating selective fragment. This small ori _RK2 plasmid cannot stably coexist with other functional RK2 replicons and is thus incompatible with RK2 replicons. However, the 393 bp ori _RK2 segment when cloned into a high copy number plasmid, where plasmid maintenance is no longer dependent on ori _RK2, does not interfere with maintenance of a resident RK2 replicon. This is in contrast to larger segments from the origin region that, when cloned at high copy number, cause the loss of a resident RK2 replicon. The apparent ability of the small HpaII ori_RK2 plasmid to displace resident RK2 replicons may indicate the turning on of one incompatibility mechanism only when replication from ori _RK2is required or may simply reflect the strong selective pressure for establishment of the incoming ori _RK2 plasmid and poor ability of the HpaII ori _RK2 plasmid to replicate in the presence of another RK2 replicon. The incompatibility expressed by the functional HpaII ori _RK2 may be designated inc ₁. The activity of a segment of RK2, cloned at high copy number, to eliminate a resident RK2 plasmid has been localized to a region of RK2 DNA, designated the inc ₂ region, to distinguish it from inc ₁, above, that overlaps but does not coincide with the 393 bp HpaII ori _RK2. This inc ₂ region also appears to be involved in segregation of RK2 derivatives since removal of a portion of this region results in both higher copy number and increased instability of the RK2 derivative. In addition to defining the region of the RK2 origin of replication, these results indicate that the ability to eliminate a resident RK2 replicon can be expressed by fragments, cloned at high copy number, that do not contain the complete ori _RK2. Also, only part of the inc ₂ region that appears to be responsible for efficient elimination of RK2 replicons by fragments cloned at high copy number is required for ori _RK2.     

The genome sequence of the incompatibility group Iγ plasmid R621a: Evolution of IncI plasmids

We present the complete genome sequence of the tetracycline resistance plasmid R621a isolated from Salmonella typhimurium, which belongs to the incompatibility group Iγ. In the 93,185 bp circular double-stranded R621a genome, 96 complete ORFs are predicted. In addition, one and six different kinds of proteins are produced by translational reinitiation and shufflon multiple inversions, respectively. The genome consists of four regions: replication, leading, transfer, and miscellaneous regions. The R621a genome is similar to those of IncI1 plasmids such as R64 and ColIb-P9 and particularly to those of pEK204 and pEC_Bactec. Three major differences including inc, parAB, and excA regions were noted between R621a and prototype IncI1 plasmids. Seven nucleotide replacements and one nucleotide deletion in the putative Inc RNA sequence are found between R621a and IncI1 plasmids irrespective of close similarity in the other parts of the rep system. The sequences of R621a parAB and excA genes are significantly different from those of R64 and ColIb-P9, while those of R621a parAB and excA genes exhibit close similarity to those of pEK204 and pEC_Bactec, respectively. The R621a genome is suggested to be formed by acquiring parAB and excA genes from pEK204 and pEC_Bactec genomes, respectively, and then novel inc function by the mutations. The insertions in the R621a, pEK204, and pEC_Bactec genomes are flanked by direct repeats, suggesting that insertions accompanied by long target duplications have also played an important role in the evolution of IncI plasmids.     

Control of Plasmid R1 Replication: Functions Involved in Replication, Copy Number Control, Incompatibility, and Switch-off of Replication

A small derivative of plasmid R1 was used to integratively suppress a chromosomal dnaA(Ts) mutation. The strain obtained grew normally at 42°C. The integratively suppressed strain was used as recipient for various plasmid R1 derivatives. Plasmid R1 and miniplasmid derivatives of R1 could be established in the strain that carried an integrated R1 replicon, but they were rapidly lost during growth. However, plasmids also carrying ColE1 replication functions were almost completely stably inherited. The integratively suppressed strain therefore allows the establishment of bacteria diploid with respect to plasmid R1 and forms a useful and sensitive system for studies of interaction between plasmid R1 replication functions. Several of the chimeric plasmids caused inhibition of growth at high temperatures. All plasmids that inhibited growth carried one particular PstI fragment from plasmid R1 (the PstI F fragment), and in all cases the growth inhibition could be ascribed to repression of initiation of chromosome replication at 42°C, i.e., they carry a trans-acting switch-off function. Furthermore, the analogous PstI fragments from different copy mutants of plasmid R1 were analyzed similarly, and one mutant was found to lack the switch-off function. The different chimeric plasmids were also tested for their incompatibility properties. All plasmids that carried the switch-off function (and no other plasmids) also carried R1 incompatibility gene(s). Since the PstI F fragment, which is present on all these plasmids, is very small (0.35 × 10⁶), it is suggested that the switch-off regulation of replication (by an inhibitor), incompatibility, and copy number control are governed by the same gene.     

The use of mini-Gal plasmids for rapid incompatibility grouping of conjugative R plasmids

The galactose operon of Escherichia coli K-12 has been used as a phenotypic marker for miniplasmids derived in vitro from R plasmids representing six incompatibility groups. This has enabled the development of a rapid incompatibility typing scheme in which the miniplasmids are used as incompatibility exemplars, their presence in strains being monitored on galactose fermentation indicator media.     

The repA2 gene of the plasmid R100.1 encodes a represser of plasmid replication

We have constructed two miniplasmids, derived from the resistance plasmid R100.1. In one of these plasmids 400 bp of R100.1 DNA have been replaced by DNA from the transposon Tn1000 (gamma-delta). This substitution removes the amino-terminal end of the repA2 coding sequence of R100.1 and results in an increased copy number of the plasmid carrying the substitution. The copy number of the substituted plasmid is reduced to normal levels in the presence of R100.1. The repA2 gene thus encodes a trans-acting repressor function involved in the control of plasmid replication.     

Isolation and characterization of lambda phages carrying the basic replicon of the resistance plasmid R1

Summary Specialized transducing lambda phages, oriR1, harboring DNA from the resistance plasmid R1drd-19 and its copy mutant pKN103 were isolated. From measurements of CCC-DNA content it is concluded that upon infection the phages can establish themselves as self-replicating plasmids in recA hosts lysogenic for lambda. It is thought that this bypassing of lambda immunity is due to the presence of the R1 origin of replication. The plasmids are sensitive to the incompatibility expressed by plasmid R1. This has been shown mainly by transduction of oriR1 into recipients containing R1 plasmids or plasmid pBR322 carrying the basic replicon. We were able to demonstrate that a copy mutant of plasmid R1 was insensitive to copA ⁺, but sensitive to the conserted action of Pst1 fragments F₁ and F₂. This mutant was previously assumed to be of the dominant type. Physical mapping of the oriR1 derivatives verified that they carry the basic replicon of plasmid R1. The plasmids are not stably maintained, but are lost in a frequency of 1%–2% per cell generation, which is consistent with their lack of the R1par region.     

The partition (par) locus of pSC101 is an enhancer of plasmid incompatibility

The incompatibitity that pSC101-derived plasmids express toward each other is mediated by directly repeated sequences (iterons) located near the plasmid's replication origin. We report here that the pSC101 par locus, which stabilizes plasmid inheritance in dividing cell populations and alters DNA superheliclty, can function as a cis-acting enhancer of incompatibility, which we show is determined jointly by the copy number of the plasmid and the number of iterons per copy. A single synthetic 32 bp iteron sequence carried by the pUC19 plasmid confers strong pSC101-specific incompatibility in the absence of any other pSC101 sites but requires the par locus to express strong incompatibility when carried by a lower-copy-number plasmid. We propose a model by which the par locus can enchance the apparently antagonistic processes of incompatibility and pSC101 DNA replication while concurrently facilitating plasmid distribution during cell division.     

Nucleotide sequence and functional properties of DNA encoding incompatibility in the broad host-range plasmid R1162

Summary A 370 base pair (bp) fragment of R1162 DNA encoding the incompatibility determinant has been cloned and sequenced. The DNA is located between 6.1 and 6.5 on the R1162 map, near the origin of replication. The sequence contains three perfectly conserved 20 bp direct repeats, with 11 bp of this sequence repeated a fourth time. The direct repeat unit shows some homology with that of another, unrelated broad host-range plasmid, RK2. The cloned DNA has two other properties: it lowers the copy number of R1162 when cloned into this plasmid, and it is required in cis for replication of R1162 satellite plasmids.