Tissue Plasminogen Activator Coating on Implant Surfaces Reduces Staphylococcus aureus Biofilm Formation

Staphylococcus aureus biofilm infections of indwelling medical devices are a major medical challenge because of their high prevalence and antibiotic resistance. As fibrin plays an important role in S. aureus biofilm formation, we hypothesize that coating of the implant surface with fibrinolytic agents can be used as a new method of antibiofilm prophylaxis. The effect of tissue plasminogen activator (tPA) coating on S. aureus biofilm formation was tested with in vitro microplate biofilm assays and an in vivo mouse model of biofilm infection. tPA coating efficiently inhibited biofilm formation by various S. aureus strains. The effect was dependent on plasminogen activation by tPA, leading to subsequent local fibrin cleavage. A tPA coating on implant surfaces prevented both early adhesion and later biomass accumulation. Furthermore, tPA coating increased the susceptibility of biofilm infections to antibiotics. In vivo, significantly fewer bacteria were detected on the surfaces of implants coated with tPA than on control implants from mice treated with cloxacillin. Fibrinolytic coatings (e.g., with tPA) reduce S. aureus biofilm formation both in vitro and in vivo, suggesting a novel way to prevent bacterial biofilm infections of indwelling medical devices.     

Carbohydrate metabolism and transport in Bacillus subtilis. A study of ctr mutations

Summary Indirect ultraviolet induction of prophage occurs when lysogenic E. coli K12 cells are mated with ultraviolet-irradiated donor strains carrying a transmissible episome such as F lac ⁺. Indirect induction occurs in wild type, uvrA, or recB recipient lysogens, but not in recA lysogens. When nonpermissive lysogens carrying prophages susO or susP are similarly mated, the defective prophages are induced and indirect curing takes place.Although indirect induction is independent of the capacity of the lysogen for repair by pyrimidine dimer excision, indirect curing (and hence indirect induction) is subject to photoreactivation when the recipient lysogen is exposed to visible light after mating. This confirms that the structure initiating indirect ultraviolet induction is a damaged transferred episome consisting of one DNA strand containing ultraviolet photoproducts and a newly synthesized discontinuous DNA strand such that pyrimidine dimers remain in single-stranded regions.F^- lac ⁺ recombinants are formed in either nonlysogenic or lysogenic Lac^- cells receiving damaged F lac ⁺ episomes from ultraviolet irradiated F lac ⁺ donors. prophage induction occurs more frequently in zygotes that form Lac⁺ recombinants than in zygotes that remain Lac^-. In contrast, cells receiving intact (undamaged) episomes are converted to F lac ⁺ secondary donors, but are rarely induced or cured.     

Dry-Heat Resistance of Bacillus subtilis var. niger Spores on Mated Surfaces

Bacillus subtilis var. niger spores were placed on the surfaces of test coupons manufactured from typical spacecraft materials (stainless steel, magnesium, titanium, and aluminum). These coupons were then juxtaposed at the inoculated surfaces and subjected to test pressures of 0, 1,000, 5,000, and 10,000 psi. Tests were conducted in ambient, nitrogen, and helium atmospheres. While under the test pressure condition, the spores were exposed to 125 C for intervals of 5, 10, 20, 50, or 80 min, with survivor data being subjected to a linear regression analysis that calculated decimal reduction times. Differences in the dry-heat resistance of the test organism resulting from pressure, atmosphere, and material were observed.     

Adhesion of Biodegradative Anaerobic Bacteria to Solid Surfaces

In order to exploit the ability of anaerobic bacteria to degrade certain contaminants for bioremediation of polluted subsurface environments, we need to understand the mechanisms by which such bacteria partition between aqueous and solid phases, as well as the environmental conditions that influence partitioning. We studied four strictly anaerobic bacteria, Desulfomonile tiedjei, Syntrophomonas wolfei, Syntrophobacter wolinii, and Desulfovibrio sp. strain G11, which theoretically together can constitute a tetrachloroethylene- and trichloroethylene-dechlorinating consortium. Adhesion of these organisms was evaluated by microscopic determination of the numbers of cells that attached to glass coverslips exposed to cell suspensions under anaerobic conditions. We studied the effects of the growth phase of the organisms on adhesion, as well as the influence of electrostatic and hydrophobic properties of the substratum. Results indicate that S. wolfei adheres in considerably higher numbers to glass surfaces than the other three organisms. Starvation greatly decreases adhesion of S. wolfei and Desulfovibrio sp. strain G11 but seems to have less of an effect on the adhesion of the other bacteria. The presence of Fe³⁺ on the substratum, which would be electropositive, significantly increased the adhesion of S. wolfei, whereas the presence of silicon hydrophobic groups decreased the numbers of attached cells of all species. Measurements of transport of cells through hydrophobic-interaction and electrostatic-interaction columns indicated that all four species had negatively charged cell surfaces and that D. tiedjei and Desulfovibrio sp. strain G11 possessed some hydrophobic cell surface properties. These findings are an early step toward understanding the dynamic attachment of anaerobic bacteria in anoxic environments.     

Thermal Death of Bacillus subtilis var. niger Spores on Selected Lander Capsule Surfaces

Dry-heat sterilization of planetary lander capsules requires a knowledge of the thermal resistivity of microorganisms in the environment to which they will be subjected during sterilization of the space hardware. The dry-heat resistance of Bacillus subtilis var. niger spores on various lander capsule materials was determined at 125 C. Eight surface materials were evaluated, including a reference material, stainless steel. Survivor curves were computed, and decimal reduction times (D values) were obtained by a linear regression analysis. In four tests on stainless steel, the average value of D at 125 C was 17.07 min. The D values for the other seven materials tested ranged from 18.64 min on magnesium surfaces to 20.83 min on conversion-coated magnesium. Of the materials evaluated, the results indicate that there is only a significant difference in the thermal resistance of B. subtilis var. niger spores on conversion-coated magnesium and conversion-coated aluminum from that on the reference material, stainless steel. The differences in D values for all the test surfaces may be the result of variations in test procedures rather than the effect of the surfaces on the thermal resistivity of the spores.     

Restriction-modification systems in Bacillus strains related to Bacillus subtilis

127 strains of bacilli sensitive to different phages of Bacillus subtilis were isolated from the soil of Moscow and its country-side. In 6 strains, restriction and modification systems were discovered which differed from these previously described for Bac. subtilis BsuR system. Two strains has identical restriction-modification systems, and one strain possessed two different systems. Using DNA from all 6 strains, it was possible to transform competent cells of Bac. subtilis RUB834. Two of these 6 strains could serve as recipients in transformation and transfection experiments.     

Cloning in Bacillus subtilis of temperature-dependent promoter fragments from Bacillus stearothermophilus and Bacillus subtilis

Abstract Using promoter-probe plasmids, more than 200 promoter-containing fragments from Bacillus stearothermophilus and Bacillus subtilis were cloned in B. subtilis . Among these, 15 promoter fragments were highly temperature-dependent in activity compared to the promoter sequence (TTGAAA for the −35 region, TATAAT for the −10 region) of the amylase gene, amyT , from B. stearothermophilus . Some fragments exhibited higher promoter activities at elevated temperature (48°C), others showed higher activities at lower temperature (30°C). Active promoter fragments at higher and lower temperatures were obtained mainly from the thermophile ( B. stearothermophilus ) and the mesophile ( B. subtilis ), respectively. A promoter fragment active at high temperature was sequenced, and the feature of the putative promoter region was discussed.     

Cloning of the Bacillus subtilis sulfanilamide resistance gene in Bacillus subtilis

A recombinant plasmid was constructed by ligation of chromosomal DNA from a sulfanilamide-resistant strain of Bacillus subtilis to the plasmid vector pUB110 which specifies neomycin resistance. Recombinant molecules generated in vitro were introduced into a B. subtilis recipient strain which carried the recE4 mutation, and selection was for neomycin-sulfanilamide-resistant transformants. A single colony was isolated containing the recombinant plasmid pKO101. This 6.3-megadalton plasmid simultaneously conferred resistance to neomycin and sulfanilamide when transferred into sensitive Rec+ or Rec- cells by either transduction or transformation.     

Dry-Heat Destruction of Bacillus subtilis Spores on Surfaces: Effect of Humidity in an Open System

Bacillus subtilis var. niger spores were tested for dry-heat resistance on stainless-steel strips hung in an oven. Heat resistance was dependent on the relative humidity before and during treatment, which in turn affected the water content of the spores. Higher humidities increased the heat resistance of the spores. D-values ranged from 16.1 min for spores conditioned at <2% relative humidity (RH) and treated at 0.34% RH to 37.6 min for spores conditioned at 89% RH and treated at 1.1% RH. The y-intercept of the regression line ranged from 6.94 x 10(4) for spores conditioned and treated at the low humidities to 2.00 x 10(5) for spores conditioned at 89% RH and treated at 0.34% RH. For a constant value of N(0), the y-intercept appears to be lowered by low-humidity conditions. The statistic log y(0)/log N(0) is used to measure the downward displacement of the regression line. Values obtained in this experiment range from 0.90 for spores conditioned at <2% RH and treated at 0.34% RH to 1.04 for spores conditioned at <2% RH and treated at 1.1% RH. A combination of linear regression and analysis of variance methods was used for data analysis. The former estimates D-values and y-intercepts, whereas the latter is sensitive to differences between treatments.     

Minicells of Bacillus subtilis

After nitrosoguanidine (N-methyl-N'-nitro-N-nitrosoguanidine) mutagenesis, two Bacillus subtilis mutants (div IV-A1 and div IV-B1) were isolated that are defective in the location of division site along cell length. Both mutations were transferred into strain CU403 by transformation, and their properties were studied in the CU403 genetic background. Location of divisions in close proximity to cell pole regions in both mutants results in minicell production. Purified minicells contain a ratio of ribonucleic acid to protein comparable to that found in the parent cells. Autoradiographs of (3)H-thymine incorporation into deoxyribonucleic acid (DNA), thymine-2-(14)C incorporation into DNA, electron micrographs, and chemical analyses for DNA all fail to demonstrate DNA in the minicells. Minicells produced by both mutants are highly motile, an indication of functional energy metabolism. Electron micrographs reveal that minicells are produced by a structurally normal division mechanism and that minicells contain a normal cell surface. The div IV-A1 mutation has been mapped by PBS1 transduction linked to ura. The div IV-B1 mutation is closely linked to pheA by both PBS1 transduction and by co-transformation.     

Bacteriophages of Bacillus subtilis

[This corrects the article on p. 294 in vol. 39.][This corrects the article on p. 295 in vol. 39.][This corrects the article on p. 298 in vol. 39.].