Isolation and evaluation of oil-producing microalgae from subtropical coastal and brackish waters

Microalgae have been widely reported as a promising source of biofuels, mainly based on their high areal productivity of biomass and lipids as triacylglycerides and the possibility for cultivation on non-arable land. The isolation and selection of suitable strains that are robust and display high growth and lipid accumulation rates is an important prerequisite for their successful cultivation as a bioenergy source, a process that can be compared to the initial selection and domestication of agricultural crops. We developed standard protocols for the isolation and cultivation for a range of marine and brackish microalgae. By comparing growth rates and lipid productivity, we assessed the potential of subtropical coastal and brackish microalgae for the production of biodiesel and other oil-based bioproducts. This study identified Nannochloropsis sp., Dunaniella salina and new isolates of Chlorella sp. and Tetraselmis sp. as suitable candidates for a multiple-product algae crop. We conclude that subtropical coastal microalgae display a variety of fatty acid profiles that offer a wide scope for several oil-based bioproducts, including biodiesel and omega-3 fatty acids. A biorefinery approach for microalgae would make economical production more feasible but challenges remain for efficient harvesting and extraction processes for some species.     

Selection for acid tolerance inRhizobium meliloti

In the selection of acid-tolerantRhizobium meliloti, procedures for the collection and isolation of rhizobia, and the assessment of acid tolerance, have not been critically evaluated. Such procedures form the basis of this study. Root nodules were collected fromMedicago spp. found growing on acid soil in Sardinia. Their encumbent bacteria were isolated directly onto media adjusted over a range of pH values, and then assessed for acid tolerance in both the laboratory and field. Strains ofRhizobium meliloti isolated onto low pH media were, in general, more acid-tolerant than sister isolates from high pH media, when tested in both the laboratory and field. Dilution (10 or 100 fold) of the inocula used in the laboratory assessment did not greatly influence the rating derived, although there was some effect of bacterial colony type on growth rating. The link between polysaccharide production and acid tolerance was not strong. There was a poor correlation between the growth ratings derived from the laboratory screening and acid tolerance as expressed in the field.     

Efficient nitrogen-fixing <Emphasis Type="Italic">Rhizobium</Emphasis> strains isolated from amazonian soils are highly tolerant to acidity and aluminium

One of the most cultivated and consumed vegetables in Brazil is the common bean, Phaseolus vulgaris L. The symbiosis of this plant species with nitrogen-fixing bacteria that are adapted to the stresses commonly found in tropical soils can increase production. The aim of this study was to evaluate the symbiotic effectiveness of bacterial strains from soils under different land uses in the Amazon region. Further, rhizobia tolerance to acidity and aluminium and the involvement of some possible physiological mechanisms of such tolerance were also investigated. In assessing the efficiency of biological nitrogen fixation, inoculation with strains UFLA04-195, UFLA04-173 and UFLA04-202, belonging to the genus Rhizobium, resulted in greater plant growth, higher shoot nitrogen content and good nodulation compared to the inoculation with the strain CIAT 899 (R. tropici), and to the mineral nitrogen control or Burkholderia fungorum strains that nodulated or not bean plants. These efficient strains grew better at pH 5.0 than at pH 6.0 or pH 6.9; they also tolerated up to 1 mmol l⁻¹ of Al³⁺ and showed an increased production of exopolysaccharides where the growing rates were less (pH 6.0 and pH 6.9). With respect to aluminium, the highest production of EPS produced greater tolerance to this element. Taken together, these results indicate that the strains evaluated in this study were tolerant to acidity and aluminium; they appeared to have developed resistance mechanisms such as EPS production and a resistant cell outer membrane (indicated by resistance to polymyxin and methyl violet). As these strains also gave increased yields of the host species, further studies on whether to recommend these strains as inoculants are already underway.     

Disparate patterns of thermal adaptation between life stages in temperate vs. tropical Drosophila melanogaster

Many terrestrial ectothermic species exhibit limited variation in upper thermal tolerance across latitude. However, these trends may not signify limited adaptive capacity to increase thermal tolerance in the face of climate change. Instead, thermal tolerance may be similar among populations because behavioural thermoregulation by mobile organisms or life stages may buffer natural selection for thermal tolerance. We compared thermal tolerance of adults and embryos among natural populations of Drosophila melanogaster from a broad range of thermal habitats around the globe to assess natural variation of thermal tolerance in mobile vs. immobile life stages. We found no variation among populations in adult thermal tolerance, but embryonic thermal tolerance was higher in tropical strains than in temperate strains. We further report that embryos live closer to their upper thermal limits than adults – that is, thermal safety margins are smaller for embryos than adults. F1 hybrid embryos from crosses between temperate and tropical populations had thermal tolerance that matched that of tropical embryos, suggesting the dominance of heat‐tolerant alleles. Together, our findings suggest that thermal selection has led to divergence in embryonic thermal tolerance but that selection for divergent thermal tolerance may be limited in adults. Further, our results suggest that thermal traits should be measured across life stages to better predict adaptive limits.     

Selection for fitness at the individual or population levels: Modelling effects of genetic modifications in microalgae on productivity and environmental safety

A mechanistic model of microalgae is used to explore the implications of modifying microalgal chlorophyll content and photosynthetic efficiency with an aim to optimising commercial biomass production. The models show the potential for a 10 fold increase in microalgae productivity in genetically modified versus unmodified configurations, while also enabling the use of bioreactors of greater optical depth operating at lower dilution rates. Analysis suggests that natural selection of a trait benefiting the individual (high Chl:C_max, i.e., high antennae size) conflicts with artificial selection of a trait (low Chl:C_max) of most benefit to production at the population level. The implication is that GM strains rather than strains selected from nature will be most beneficial for commercial algal biofuels production. Further, escaped GM algae populations may, depending on the specific nature of the modification, be quickly out-competed by the natural forms because individually a high Chl:C is beneficial in low light environments. However, it remains possible that changes in biochemical composition associated with genetic modification of photosystem competence, or with other selection processes to enhance commercial gain, may adversely affect the value of such organisms as prey for zooplankton, leading to the unwanted generation of future harmful algae.     

Stress tolerance and growth physiology of yeast strains from the Brazilian fuel ethanol industry

Improved biofuels production requires a better understanding of industrial microorganisms. Some wild Saccharomyces cerevisiae strains, isolated from the fuel ethanol industry in Brazil, present exceptional fermentation performance, persistence and prevalence in the harsh industrial environment. Nevertheless, their physiology has not yet been systematically investigated. Here we present a first systematic evaluation of the widely used industrial strains PE-2, CAT-1, BG-1 and JP1, in terms of their tolerance towards process-related stressors. We also analyzed their growth physiology under heat stress. These strains were evaluated in parallel to laboratory and baker’s strains. Whereas the industrial strains performed in general better than the laboratory strains under ethanol or acetic acid stresses and on industrial media, high sugar stress was tolerated equally by all strains. Heat and low pH stresses clearly distinguished fuel ethanol strains from the others, indicating that these conditions might be the ones that mostly exert selective pressure on cells in the industrial environment. During shake-flask cultivations using a synthetic medium at 37 °C, industrial strains presented higher ethanol yields on glucose than the laboratory strains, indicating that they could have been selected for this trait—a response to energy-demanding fermentation conditions. These results might be useful to guide future improvements of large-scale fuel ethanol production via engineering of stress tolerance traits in other strains, and eventually also for promoting the use of these fuel ethanol strains in different industrial bioprocesses.     

Hundred Years of Environmental Change and Phytoplankton Ecophysiological Variability Archived in Coastal Sediments

Marine protist species have been used for several decades as environmental indicators under the assumption that their ecological requirements have remained more or less stable through time. However, a growing body of evidence suggests that marine protists, including several phytoplankton species, are in fact highly diverse and may quickly respond to changes in the environment. Predicting how future climate will impact phytoplankton populations is important, but this task has been challenged by a lack of time-series of ecophysiological parameters at time-scales relevant for climate studies (i.e. at least decadal). Here, we report on ecophysiological variability in a marine dinoflagellate over a 100-year period of well-documented environmental change, by using the sedimentary archive of living cysts from a Scandinavian fjord (Koljö Fjord, Sweden). During the past century, Koljö Fjord has experienced important changes in salinity linked to the North Atlantic Oscillation (NAO). We revived resting cysts of Pentapharsodinium dalei preserved in the fjord sediments and determined growth rates for 18 strains obtained from 3 sediment core layers at salinity 15 and 30, which represent extreme sea-surface conditions during periods of predominantly negative and positive NAO phases, respectively. Upper pH tolerance limits for growth were also tested. In general, P. dalei grew at a higher rate in salinity 30 than 15 for all layers, but there were significant differences among strains. When accounting for inter-strain variability, cyst age had no effect on growth performance or upper pH tolerance limits for this species, indicating a stable growth response over the 100-year period in spite of environmental fluctuations. Our findings give some support for the use of morphospecies in environmental studies, particularly at decadal to century scales. Furthermore, the high intra-specific variability found down to sediment layers dated as ca. 50 years-old indicates that cyst-beds of P. dalei are repositories of ecophysiological diversity.     

IDENTIFICATION AND PHYSIOLOGICAL ASPECTS OF A NOVEL CAROTENOID‐ENRICHED,METAL‐RESISTANT MICROALGA ISOLATED FROM AN ACIDIC RIVER IN HUELVA (SPAIN)1

A heavy‐metal‐resistant, carotenoid‐enriched novel unicellular microalga was isolated from an acidic river in Huelva, Spain. The isolated ribosomal 18S subunit rDNA sequence showed homology with known sequences from green microalgae, the closest sequence (98% homology) belonging to the genus Coccomyxa. The isolated microalga therefore was an up to now uncultured microalga. The microalga was isolated from Tinto River area (Huelva, Spain), an acidic river that exhibits very low pH (1.7–3.1) with high concentrations of sulfuric acid and heavy metals, including Fe, Cu, Mn, Ni, and Al. Electron micrographs show that the microalga contains a large chloroplast with a presence of lipid droplets, an increased number of starch bodies as well as electron‐dense deposits and plastoglobules, the last observed only in iron‐exposed cells. Unlike other acidophile microalgae, the isolated microalga showed high growth rates when cultivated photoautotrophycally (up to 0.6 d^?1) in a suitable culture medium prepared at our laboratory. The growth was shown to be iron dependent. When the microalga is grown in fluidized bed reactors, the high growth rates resulted in unexpectedly high productivities for being a microalga that naturally grows in acidic environments (0.32 g·L^?1·d^?1). The microalga also grows optimally on reduced carbon sources, including glucose and urea, and at an optimal temperature of 35°C. The alga pigment profile is particularly rich in carotenoids, especially lutein, suggesting that the microalga might have potential for antioxidant production, namely, xanthophylls.     

Effects of Temperature and pH on Cell Growth of a Flocculating Microalga (Chlorella vulgaris) JSC-7

微藻是可广泛用于健康食品及水产养殖的饵料,同时,微藻细胞内积累的油脂可作为可再生生物燃料,因此微藻的生长和代谢受到广泛关注。温度和pH对微藻的生物量积累有很大影响,考察不同温度和pH条件下微藻细胞的生长有助于寻找最佳的条件进行微藻的培养。自絮凝小球藻JSC-7（Chlorella vulgaris JSC-7）可实现自沉降采收,有利于降低微藻生产成本,优化其生长条件对更好地利用该微藻具有重要意义。考察了温度（22∽40℃）及pH（6.0∽10.0）对其细胞生长、叶绿素含量和油脂产量的影响。在所选取的温度及pH范围内,JSC-7细胞均可生长,显示该藻种可以适应广泛的温度和pH条件。适合细胞生长的温度依次为31℃〉28℃〉35℃〉25℃,pH依次为7.0〉8.0〉6.0。pH 8.0时生物量和油脂的积累量最多,说明该藻株在弱碱条件下更适合生长和产油。当温度为31℃、pH为7.0时,可获得最高的生长量（OD690=0.941）、叶绿素含量（19 mg/L）及油脂产量（39.07%/克干重）。     

Characterization of arsenopyrite oxidizing Thiobacillus. Tolerance to arsenite,arsenate, ferrous and ferric iron

Two strains of Thiobacillus, T. ferrooxidans and T. thiooxidans, have been isolated from a bacterial inoculum cultivated during a one-year period in a 1001 continuous laboratory pilot for treatment of an arsenopyrite/pyrite concentrate. The optimum pH for the growth of both strains has been found to be between 1.7 and 2.5. Because of the high metal toxicity in bioleach pulps, the tolerance of T. ferrooxidans and T. thiooxidans with respect to iron and arsenic has been studied. The growth of both strains is inhibited with 10 g/l of ferric ion, 5 g/l of arsenite and 40 g/l of arsenate. 20 g/l of ferrous iron is toxic to T. ferrooxidans but 30 g/l is necessary to impede the growth of T. thiooxidans.     

The effect of nutrient and phytohormone supplementation on the growth,pigment yields and biochemical composition of newly isolated microalgae

The selection of cultivation conditions for enhancing the productivity and yields of key metabolites are essential for the economic viability of the microalgae-based biorefinery process. The effects of cultivation parameters on microalgal physiology are often species or strain specific. It is hence critical to establish baseline parameters for newly isolated strains and manipulate the culture conditions to optimise their metabolite yields.In this study, five microalgae strains isolated from the west of Ireland were cultivated under varying macronutrient concentrations (NaNO₃ and NaH₂PO₄) and phytohormones (salicylic acid and methyl jasmonate) supplementation to establish their effects on growth rates, photosynthetic pigments and overall biochemical composition.Increasing the medium nitrate content 3-fold resulted in a significant increase in growth, pigments and lipids for 4 of the 5 strains. Methyl jasmonate supplementation caused an increase in carotenoids and lipids in all strains in a dose- and species-specify manner. Salicylic acid treatment induced an increase in protein content in Rhodella sp. APOT_15 and the two chlorophyta strains, K. aperta DMGFW_21 and B. submarina APSW_11.Overall, tailoring the cultivation conditions for each strain can lead to improved strain performance and the identification of key process parameters for the upscaled production of high-value metabolites.     

Bioprospecting for hyper-lipid producing microalgal strains for sustainable biofuel production

Global petroleum reserves are shrinking at a fast pace, increasing the demand for alternate fuels. Microalgae have the ability to grow rapidly, and synthesize and accumulate large amounts (approximately 20-50% of dry weight) of neutral lipid stored in cytosolic lipid bodies. A successful and economically viable algae based biofuel industry mainly depends on the selection of appropriate algal strains. The main focus of bioprospecting for microalgae is to identify unique high lipid producing microalgae from different habitats. Indigenous species of microalgae with high lipid yields are especially valuable in the biofuel industry. Isolation, purification and identification of natural microalgal assemblages using conventional techniques is generally time consuming. However, the recent use of micromanipulation as a rapid isolating tool allows for a higher screening throughput. The appropriate media and growth conditions are also important for successful microalgal proliferation. Environmental parameters recorded at the sampling site are necessary to optimize in vitro growth. Identification of species generally requires a combination of morphological and genetic characterization. The selected microalgal strains are grown in upscale systems such as raceway ponds or photobireactors for biomass and lipid production. This paper reviews the recent methodologies adopted for site selection, sampling, strain selection and identification, optimization of cultural conditions for superior lipid yield for biofuel production. Energy generation routes of microalgal lipids and biomass are discussed in detail.     

产油嗜碱绿球藻MC-1的烟气适应性

为了降低微藻产油成本和减少温室气体的排放,利用煤炭烟气培养一株具有pH快速漂移和高碱适应特性的产油微藻Chlorococcum alkaliphilus MC-1.首先于15L光生物反应器中分三组(空白组、CO2组和烟气组)进行小体积培养实验,然后在24 m2开放式跑道池中进行放大培养,研究了微藻MC-1对烟气培养的适应性.结果表明,在光生物反应器培养实验中,烟气组的最高生物量浓度、生长速率、藻体总脂含量和CO2固定速率分别为:(1.02±0.07) g/L、(0.12±0.02) g/(L·d)、(37.84±0.58)％和(0.20±0.02) g/(L·d),比CO2组分别提高了36％、33.33％、15.34％和33.33％.在开放式跑道池培养实验中,烟气与纯CO2的培养效果相似,烟气培养下的最高生物量浓度、生长速率、藻体总脂含量和CO2固定速率分别为:147.40 g/m2、14.73 g/(m2·d)、35.72％和24.01 g/(m2·d);烟气培养产出的藻粉中有毒重金属Pb、As、Cd和Cr的含量均低于国家限量标准.实验同时测定了烟气培养下藻液对烟气中CO2、NO和SO2的吸收效果,结果显示,在光生物反应器和开放式跑道池培养中此三种气体的平均吸收率均高于以往研究结果.上述结果说明,该藻能适应烟气培养条件,耦合微藻MC-1产油与烟气减排的室外放大培养是可行的.     

The growth limits of a large number of Listeria monocytogenes strains at combinations of stresses show serotype--and niche-specific traits

Aims: The aim of this study was to associate the growth limits of Listeria monocytogenes during exposure to combined stresses with specific serotypes or origins of isolation, and identify potential genetic markers. Methods and Results: The growth of 138 strains was assessed at different temperatures using combinations of low pH, sodium lactate, and high salt concentrations in brain heart infusion broth. None of the strains was able to grow at pH ≤ 4·4, a_w ≤ 0·92, or pH ≤ 5·0 combined with a_w ≤ 0·94. In addition, none of the strains grew at pH ≤ 5·2 and NaLac ≥ 2%. At 30°C, the serotype 4b strains showed the highest tolerance to low pH and high NaCl concentrations at both pH neutral (pH 7·4) and mild acidic conditions (pH 5·5). At 7°C, the serotype 1/2b strains showed the highest tolerance to high NaCl concentrations at both pH 7·4 and 5·5. Serotype 1/2b meat isolates showed the highest tolerance to low pH in the presence of 2% sodium lactate at 7°C. ORF2110 and gadD1T1 were identified as potential biomarkers for phenotypic differences. Conclusions: Differences in growth limits were identified between specific L. monocytogenes strains and serotypes, which could in some cases be associated with specific genetic markers. Significance and Impact of the Study: Our data confirm the growth limits of L. monocytogenes as set out by the European Union for ready-to-eat foods and provides an additional criterion. The association of L. monocytogenes serotypes with certain stress responses might explain the abundance of certain serotypes in retail foods while others are common in clinical cases.     

Mechanisms of response to salinity in halotolerant microalgae

Summary A limited number of organic solutes are used by microalgae to adjust their internal osmotic pressure in response to changing external salinities. Glycerol and proline are used by the most extremely halotolerant algae. Only glycerol allows growth at salinities approaching saturation. In addition to organic osmoregulatory solutes, inorganic ions also play an important role in osmoregulation. The ability of microalgae to maintain intracellular ions at levels compatible with metabolic functions may set upper limits for their salt tolerance. Requirements for NaCl in the external medium for nutrient transport may define the lower salinity limits for growth observed for some euryhaline algae.Osmotic upshocks generally cause severe temporary inhibition of photosynthesis in euryhaline microalgae. Extensive osmotic downshocks have little effect on photosynthesis in microalgae with strong cell walls, while wall-less species appear to be more sensitive. Rapid glycerol synthesis takes place in response to increased external salinity inChlamydomonas pulsatilla both in light and dark. Starch supplies carbon for glycerol synthesis in the dark and also during the initial periods of inhibition of photosynthesis in the light. Turnover of osmoregulatory solutes such as glycerol and isofloridoside may be an important aspect of the osmoregulatory mechanism.At salinities beyond the growth limit for the green flagellateChlamydomonas pulsatilla, resting spores are formed that enable this alga to survive extreme salinities.     

Local bioprospecting for high-lipid producing microalgal strains to be grown on concentrated municipal wastewater for biofuel production

Mass cultivation of microalgae for biofuel production depends heavily on the performance of the microalgae strains used. In this study, 60 algae-like microorganisms collected from different sampling sites in Minnesota were examined using multi-step screening and acclimation procedures to select high-lipid producing facultative heterotrophic microalgae strains capable of growing on concentrated municipal wastewater (CMW) for simultaneous energy crop production and wastewater treatment. Twenty-seven facultative heterotrophic microalgae strains were found, among which 17 strains were proved to be tolerant to CMW. These 17 top-performing strains were identified through morphological observation and DNA sequencing as Chlorella sp., Heynigia sp., Hindakia sp., Micractinium sp., and Scenedesmus sp. Five strains were chosen for other studies because of their ability to adapt to CMW, high growth rates (0.455-0.498 d⁻¹) and higher lipid productivities (74.5-77.8 mg L⁻¹ d⁻¹). These strains are considered highly promising compared with other strains reported in the literature.     

SALINITY TOLERANCE OF DIATOMS FROM THALASSIC HYPERSALINE ENVIRONMENTS

Thirty-four benthic diatom strains were isolated from thalassic hypersaline marine environments and their salinity tolerance characterized in growth experiments conducted at salinities ranging from 0.5% to 17.5% (weight of total salts per volume, g·100 mL ^{− 1}). The results were compared with the patterns of diatom species distribution and abundance in hypersaline evaporation ponds and tidal channels of Guerrero Negro, Baja California Sur, Mexico. The isolated strains were representative of the diatom assemblages present in the saltern ponds but were less so of natural assemblages in tidal channels. In general, we found a clear decreasing trend of diatom diversity in the field and in the isolated strains with increasing salinity. With some exceptions, the upper limit of salinity tolerance in cultivated strains corresponded to their distribution in field samples. However, the relative abundance of species in the field was not correlated with growth rates achieved in culture for the same salinities. Most cultured strains exhibited extreme euryhalinity growing well from brackish to hypersaline conditions, but the particulars of salt tolerance were quite diverse among strains. The most halotolerant taxa, two Amphora species, Amphora cf. subacutiuscula Schoeman, Nitzschia fusiformis Grunow, and Entomoneis sp., grew well in salinities ranging from 0.5% to 15%. Three strains of Pleurosigma strigosum W. Smith that were unable to grow in salinities less than 5% total salts represent the only true halophilic diatoms ever reported. The fact that many strains displayed a remarkable halotolerance, with optimal or near-optimal growth rates at salinities as high as three times that of seawater, implies that diatoms from hypersaline environments are evolutionarily highly adapted to such environments.     

Hydrocarbon productivities in different <Emphasis Type="Italic">Botryococcus</Emphasis> strains: comparative methods in product quantification

Six different strains of the green microalgae Botryococcus belonging to the A-race or B-race, accumulating alkadiene or botryococcene hydrocarbons, respectively, were compared for biomass and hydrocarbon productivities. Biomass productivity was assessed gravimetrically upon strain growth in the laboratory under defined conditions. Hydrocarbon productivities were measured by three different and independent experimental approaches, including density equilibrium of the intact cells and micro-colonies, spectrophotometric analysis of hydrocarbon extracts, and gravimetric quantitation of eluted hydrocarbons. All three hydrocarbon-quantitation methods yielded similar results for each of the strains examined. The B-race microalgae Botryococcus braunii var. Showa and Kawaguchi-1 constitutively accumulated botryococcene hydrocarbons equivalent to 30% and 20%, respectively, of their overall biomass. The A-race microalgae Botryococcus braunii, varieties Yamanaka, UTEX 2441 and UTEX LB572 constitutively accumulated alkadiene hydrocarbons ranging from 14% to 13% and 10% of their overall biomass, respectively. Botryococcus sudeticus (UTEX 2629), a morphologically different green microalga, had the lowest hydrocarbon accumulation, equal to about 3% of its overall biomass. Results validate the density equilibrium and spectrophotometric analysis methods in the quantitation of botryococcene-type hydrocarbons. These analytical advances will serve in the screening and selection of B. braunii and of other microalgae in efforts to identify those having a high hydrocarbon content for use in commercial applications.     

Factors Affecting the Salinity Tolerance of the Freshwater Cryptomonad Chilomonas paramecium

ABSTRACT. The capacity of the freshwater cryptomonad Chilomonas paramecium to develop a tolerance for seawater in the growth medium was investigated as part of a research program exploring potential microbial food sources for estuarine bivalve mollusks. By gradually increasing the percentage of estuarine seawater included in a freshwater culture medium over the course of 10 years, strains were obtained that tolerate from 16 to 32% seawater (highest salinity 10.5 ppt), achieving equivalent final densities with similar gross biochemical composition. However, after subculture in seawater-containing media for over 20 years, growth rates in more-saline media remained appreciably slower than in low-salinity media. Reduction of C. paramecium growth rate by seawater was found to be exacerbated in media with an initial pH of 3.5 as compared with pH 4.0–5.0, suggesting either a specific H⁺ effect upon metabolism of the medium carbon source (lactic acid) or a general cation effect upon nutrient uptake or cell metabolism. By contrast, depression of growth rates at high salinity was ameliorated by eliminating sodium-phosphate enrichments in growth media. This suggests that cations in the phosphate salt were contributing to cation-mediated growth inhibition. Results indicate a potential for C. paramecium , cultured in moderately saline media with no phosphate enrichments, to be used as a carbohydrate supplement for laboratory and hatchery feeding of estuarine bivalve mollusks.