The optical properties of tyrosine-containing cyclic dipeptides

The chiroptical properties of the cyclic dipeptides cyclo (L -alanyl-L -tyrosine) and cyclo(L -tyrosyl-L -tyrosine) have been investigated as a function of molecular conformation. Theoretical optical calculations and conformational energy calculations have been carried out as a function of the side-chain dihedral angles χ¹ and χ², and as a function of the angle of fold of the cyclic dipeptide backbone. The results of these theoretical calculations have been compared with experimental circular dichroism (CD) data. Theoretical predictions are in very good agreement with experiment for c(L -Tyr-L -Tyr). Agreement was not quite as good for c(L -Ala-L -Tyr), although the signs of all of the Cotton effects were apparently predicted correctly except for that associated with the lowest energy tyrosine absorption band.     

Contribution of side-chain chromophores to the optical activity of proteins: model compound studies. I. Alpha-methyl-L-tyrosine

The optical rotatory power and the conformational energy of the amino acid α-methyl-L -tyrosine has been calculated as a function of molecular conformation. Comparison of the results of these theoretical calculations with experimental circular dichroism data indicates that the conformational freedom of this molecule is highly restricted. The most heavily populated conformations appear to be those near χ1 = 60°, χ2 = 80°, Ψ = 175°, and χ1 = 300°, χ2 = 80°, Ψ = 5°. The χ1 = 180° conformations are not likely to be populated to a significant extent at ordinary temperatures.     

Location of proline derivatives in conformational space. I. Conformational calculations; optical activity and NMR experiments

In order to develop methods of analysis applicable to the determination of the conformation of biological polymers in solution, a series of proline derivatives was studied. The steric constraints of the pyrrolidine ring limit these compounds to a relatively small set of conformations. This set was further reduced by eliminating conformations with large computed conformational energy. Computations revealed that the conformational energy of the proline derivatives fits into one of three classes, depending on the bulk and the polarity of the C-terminal group. Three analogous classes of optical activity were observed. The optical activity data were analyzed in terms of conformations computed to be of low energy. In some cases qualitative theoretical considerations enabled molecular groups to be located. For example, solvent-dependent isomerization of the carboxyl hydrogen of N-acetyl-L -proline was detected. Nuclear magnetic resonance provided an experimental measure of the fraction of molecules which had cis unsymmetrically-substituted tertiary amide groups. This information aided and confirmed the other measures of molecular conformation.     

Optical and conformational properties of the 7-(beta-D-ribofuranosyl) purines

The optical and conformational properties of certain 7-ribosyl purines have been studied using several experimental and theoretical methods. The CD, MCD, and absorption spectra of the 7-ribosyl purines and their cations have been determined experimentally with some solvent effects being noted. Theoretically we have used the SCF-CI and CNDO molecular orbital calculations to determine the optical properties of the bases; Simpson's bond exciton theory to determine the optical properties of the bases; Simpson's bond exciton theory to determine the optical properties of the ribose moiety; the optical activity was determined by the dipole coupling and electricmagnetic coupling equations; and the conformational energy calculations are included as a basis for excluding highly improbable conformations. On the basis of these calculations, we concluded that the oxy derivatives and the amino derivatives are predominately in the “extreme anti” conformation and “standard anti” conformation, respectively. However, the conclusions are tentative since at the present time the band assignments are not unequivocal. At least one n-π* transition has been identified in the spectra which is not notably sensitive to pH and solvent effects. Several implications of this observation are discussed.     

Conformational analysis of substituted pyrrolidones

Consistent force-field calculations were performed on a series of methyl substituted pyrrolidones. Methyl substitution enhances the non-planarity of the pyrrolidone ring in a way wich varies with the position of the substituent. The effect of ring distortion is to produce skeletal contributions to the rotatory strength of the nπ* transition of the amide group. Depending on position of substitution, these reinforce or oppose the substituent contribution to optical activity. There is favorable agreement between the conformational calculations and the quadrant rule for the optical activity of the nπ* transition of the peptide chromophore.     

Conformational studies of poly(L-tyrosine). A helix–coil transition in dimethyl sulfoxide–dichloroacetic acid mixtures

Poly(L -tyrosine) is a random coil in dimethyl sulfoxide. Upon addition of dichloroacetic acid, poly(L -tyrosine) undergoes a conformational transition centered at about 10% dichloroacetic acid. The transition is nearly complete at 20% dichloroacetic acid. Further addition of dichloroacetic acid leads to precipitation of poly(L -tyrosine). We have characterized this transition by optical rotation, viscosity, circular dichroism, and infrared. The optical rotation at 350 nm and the intrinsic viscosity increase sharply to values that are consistent with a transition to the α-helix conformation. The circular dichroism of poly(L -tyrosine) in dimethyl sulfoxide and in dimethyl sulfoxide/dichloroacetic acid (80:20 v/v) agrees with previous reports for random-coil and α-helix conformations, respectively. The infrared spectrum of poly(L -tyrosine) in dimethyl sulfoxide/dichloroacetic acid (80:20 v/v) shows no evidence of β-structure. We conclude that the transition on going from dimethyl sulfoxide to 20% dichloroacetic acid in dimethyl sulfoxide is a coil → α-helix transition. The amide-I band of poly(L -tyrosine) in dimethyl sulfoxide/dichloroacetic acid (80:20) is found to be at 1662 cm^?1. It has been suggested that this high frequency may be indicative of a left-handed α-helix. However, this high amide-I frequency is consistent with conformational energy calculations of Scheraga and co-workers. The mechanism of the dichloroacetic acid-induced transition to an α-helix is discussed. Dichloroacetic acid and dimethyl sulfoxide interact strongly and the transition presumably involves a marked decrease in the ability of dimethyl sulfoxide to solvate the peptide backbone and aromatic side chains upon complex formation with dichloroacetic acid.     

Conformational flexibility of peptides containing α,β-unsaturated amino acid residues. I. Conformational analysis of N-acetyl-N′-methylamides of dehydroalanine and N-methyldehydroalanine

Conformational energy calculations on the N-acetyl-N′-methylamides of dehydroalanine and N-methyldehydroalanine indicate that their conformational behavior is very different from that of the corresponding saturated compounds. The conformational data in the literature from x-ray and nmr investigations on peptides containing α,β-unsaturated residues are discussed on the basis of these theoretical results.     

The multiple-minima problem in the conformational analysis of polypeptides. III. An Electrostatically Driven Monte Carlo Method: Tests on enkephalin

The three-dimensional conformation of Met-enkephalin, corresponding to the lowest minimum of the empirical potential energy function ECEPP/2 (empirical conformational energy program for peptides), has been determined using a new algorithm, viz. the Electrostatically Driven Monte Carlo Method. This methodology assumes that a polypeptide or protein molecule is driven toward the native structure by the combined action of electrostatic interactions and stochastic conformational changes associated with thermal movements. These features are included in the algorithm that produces a Monte Carlo search in the conformational hyperspace of the polypeptide, using electrostatic predictions and a random sampling technique to locate low-energy conformations. In addition, we have incorporated an alternative mechanism that allows the structure to escape from some conformational regions representing metastable local energy minima and even from regions of the conformational space with great stability. In 33 test calculations on Met-enkephalin, starting from arbitrary or completely random conformations, the structure corresponding to the global energy minimum was found inall the cases analyzed, with a relatively small search of the conformational space. Some of these starting conformations wereright orleft-handed -helices, characterized by good electrostatic interactions involving their backbone peptide dipoles; nevertheless, the procedure was able to convert such locally stable structures to the global-minimum conformation.On leave from the National University of San Luis, Faculty of Sciences and Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET), Instituto de Matemática Aplicada, San Luis, Ejército de los Andes 950, 5700 San Luis, Argentina.     

Isolation,Stereochemical Study,and Cytotoxic Activity of Isobenzofuran Derivatives From a Marine Streptomyces sp.

A new 1,3‐dihydroisobenzofuran derivative ( 1 ), together with its epimer ( 2 ), was isolated from marine Streptomyces sp. W007. The structure of the two compounds was established by extensive spectroscopic analysis and comparison with reported data. The absolute configurations of 1 and 2 were determined by a combination of experimental and computational means, including J‐coupling analysis and nuclear Overhauser effect spectroscopy (NOESY) spectra, nuclear magnetic resonance (NMR) calculations, electronic circular dichroism (ECD), and optical rotation (OR) calculations. Compound 1 had no cytotoxicity against human lung adenocarcinoma cell line A549, while compound 2 exhibited weak activity, suggesting that the biological activity depends on the configuration of a single chirality center. Chirality 27:82–87, 2015. © 2014 Wiley Periodicals, Inc.     

Identification and optimization of tyrosine hydroxylase activity in Mucuna pruriens DC. var. utilis

Tyrosine hydroxylase, an iron containing tetrahydrobiopterin dependent monooxygenase (tyrosine 3-monooxygenase; EC 1.14.16.2), catalyzes the rate-limiting step in which l-dopa is formed from the substrate l-tyrosine. l-Dopa concentration and activity of l-tyrosine hydroxylase enzyme were measured in roots, stem, leaves, pods, and immature seeds of Mucuna pruriens. Immature seeds contained maximum l-dopa content and mature leaves possessed maximum catalytic activity of tyrosine hydroxylase. Tyrosine hydroxylase from leaf homogenate was characterized as a 55 kDa protein by SDS-PAGE and Western-blot analysis with monoclonal mouse IgG2a tyrosine hydroxylase antibody. The conditions for maximum tyrosine hydroxylase activity from the leaf extract were optimized with respect to temperature, pH, cofactor 6-MPH₄, and divalent metal ions. The tyrosine hydroxylase from leaf extract possessed a K _m value of 808.63 μM for l-tyrosine at 37°C and pH 6.0. The activity of the enzyme was slightly inhibited at 2,000 μM l-tyrosine. Higher concentrations of the cofactor 6-MPH₄, however, completely inhibited the synthesis of l-dopa. Tyrosine hydroxylase converted specific monophenols such as l-tyrosine (808.63 μM) and tyramine (K _m 1.1 mM) to diphenols l-dopa and dopamine, respectively. Fe(II) activated the enzyme while higher concentration of other divalent metals reduced its activity. For the first time, tyrosine hydroxylase from M. pruriens is being reported in this study.     

Influence of local interactions on protein structure. I. Conformational energy studies of N-acetyl-N′-methylamides of pro-X and X-pro dipeptides

Conformational energy calculations using an Empirical Conformational Energy Program for Peptides (ECEPP) were carried out on the N-acetyl-N′-methylamides of Pro-X, where X = Ala, Asn, Asp, Gly, Leu, Phe, Ser, and Val, and of X-Pro, where X = Ala, Asn, Gly, and Pro. The conformational energy was minimized from starting conformations which included all combinations of low-energy single-residue minima and several standard bend structures. It was found that almost all resulting minima are combinations of low-energy single-residue minima, suggesting that intra residue interactions predominate in determining conformation. The calculations also indicate, however, that inter residue interactions can be important. In addition, librational entropy was found to influence the relative stabilities of some minima. Because of the existence of 10–100 low-energy minima for each dipeptide, the normalized statistical weight of an individual minimum rarely exceeds 0.3, suggesting that these dipeptides have considerable conformational flexibility and exist as statistical ensembles of low-energy structures. The propensity of each dipeptide to form bend conformations was calculated, and the results were compared with available experimental data. It was found that bends are favored in Pro-X dipeptides because ?_Pro is fixed by the pyrrolidine ring in a conformation which is frequently found in bends, but that bends are not favored in X-Pro dipeptides because interactions between the X residue and the pyrrolidine ring restrict the X residue to conformations which are not usually found in bends.     

Association of plasma ortho-tyrosine/para-tyrosine ratio with responsiveness of erythropoiesis-stimulating agent in dialyzed patients

Abstract

Objectives

Patients with end-stage renal failure (ESRF) treated with erythropoiesis-stimulating agents (ESAs) are often ESA-hyporesponsive associated with free radical production. Hydroxyl free radical converts phenylalanine into ortho-tyrosine, while physiological isomer para-tyrosine is formed enzymatically, mainly in the kidney. Production of ‘para-tyrosine’ is decreased in ESRF and it can be replaced by ortho-tyrosine in proteins. Our aim was to study the role of tyrosines in ESA-responsiveness.

Methods

Four groups of volunteers were involved in our cross-sectional study: healthy volunteers (CONTR; n = 16), patients on hemodialysis without ESA-treatment (non-ESA-HD; n = 8), hemodialyzed patients with ESA-treatment (ESA-HD; n = 40), and patients on continuous peritoneal dialysis (CAPD; n = 21). Plasma ortho-, para-tyrosine, and phenylalanine levels were detected using a high performance liquid chromatography (HPLC)-method. ESA-demand was expressed by ESA-dose, ESA-dose/body weight, and erythropoietin resistance index₁ (ERI₁, weekly ESA-dose/body weight/hemoglobin).

Results

We found significantly lower para-tyrosine levels in all groups of dialyzed patients when compared with control subjects, while in contrast ortho-tyrosine levels and ortho-tyrosine/para-tyrosine ratio were comparatively significantly higher in dialyzed patients. Among groups of dialyzed patients the ortho-tyrosine level and ortho-tyrosine/para-tyrosine ratio were significantly higher in ESA-HD than in the non-ESA-HD and CAPD groups. There was a correlation between weekly ESA-dose/body weight, ERI₁, and ortho-tyrosine/para-tyrosine ratio (r = 0.441, P = 0.001; r = 0.434, P = 0.001, respectively). Our most important finding was that the ortho-tyrosine/para-tyrosine ratio proved to be an independent predictor of ERI₁ (β = 0.330, P = 0.016). In these multivariate regression models most of the known predictors of ESA-hyporesponsiveness were included.

Discussion

Our findings may suggest that elevation of the ratio of ortho-tyrosine/para-tyrosine could be responsible for decreased ESA-responsiveness in dialyzed patients.     

Computer simulation of the conformational properties of retro–inverso peptides. I. Empirical force field calculations of rigid and flexible geometries of N-acetylglycine-N′- methylamide,bis(acetamido) methane,and N,N′- dimethylmalonamide and their corresponding Cα-methylated analogs

Rigid and flexible geometry calculations are described for N-acetylglycine-N′-methylamide, N-acetylalanine-N′-methylamide, and their retro-inverso analogs, bis(acetamido) methane, 1,1-bis(acetamido) ethane, N,N′-dimethylmalonamide, and N,N′-dimethyl-2-methyl-malonamide. The significance of relaxing all degrees of freedom, especially angular flexibility is demonstrated. The flexible geometry approach yields energy maps similar to those from rigid geometry, but the energy barriers between minima are substantially reduced, leading in general, to more probable transitions and a higher volume of accessible conformational space. Whereas the glycine and alanine derivatives exhibit their lowest energy minima in the C region, the gem-diaminoalkyl and malonyl residues show their lowest minima in the “α-helical” regions. With respect to the effect of side chains (H versus CH₃), the greatest conformational influence appears with the gem-diaminoalkyl residues. These results indicate significantly different conformational behavior of retro peptides and the implications of these pairwise incorporations of retro-inverso residues in peptide chains, are discussed.     

Synthesis of l-Tyrosine or 3,4-Dihydroxyphenyl-l-alanine from Pyruvic Acid,Ammonia and Phenol or Pyrocatechol

The synthesis of l-tyrosine or 3,4-dihydroxyphenyl-l-alanine (l-dopa) from pyruvate, ammonia and phenol or pyrocatechol was studied with intact cells of Erwinia herbicola ATCC 21434 containing high tyrosine phenol lyase activity. By elemental analyses and determination of optical activity, the tyrosine or dopa synthesized was confirmed to be entirely of l-form. Maximum amount of l-tyrosine (60.5 g/liter) or l-dopa (58.5 g/liter) was formed using this enzymatic method by feeding sodium pyruvate and phenol or pyrocatechol. However, large amounts of by-products were formed in the l-dopa synthetic reaction mixture. By-products were proved to be formed from l-dopa and pyruvate by a nonenzymic reaction. pH and the temperature of reaction had intensive effects on the formation of by-products. A simple method using a boric acid-pyrocatechol complex was devised, as the feeding procedure of substrates was complicated.     

Prediction of the native conformation of a polypeptide by a statistical-mechanical procedure. III. Probable and average conformations of enkephalin

The program SMAPPS (Statistical-Mechanical Algorithm for Predicting Protein Structure) was originally designed to determine the probable and average backbone (?, ψ) conformations of a polypeptide by the application of equilibrium statistical mechanics in conjunction with an adaptive importance sampling Monte Carlo procedure. In the present paper, the algorithm has been extended to include the variation of all side-chain (χ) and peptide-bond (ω) dihedral angles of a polypeptide during the Monte Carlo search of the conformational space. To test the effectiveness of the generalized algorithm, SMAPPS was used to calculate the probable and average conformations of Met-enkephalin for which all dihedral angles of the pentapeptide were allowed to vary. The total conformational energy for each randomly generated structure of Met-enkephalin was obtained by summing over the interaction energies of all pairs of nonbonded atoms of the whole molecule. The interaction energies were computed by the program ECEPP /2 (Empirical Conformational Energy Program for Peptides). Solvent effects were not included in the computation. The results of the Monte Carlo calculation of the structure of Met-enkephalin indicate that the thermodynamically preferred conformation of the pentapeptide contains a γ-turn involving the three residues Gly²-Gly³-Phe⁴. The γ-turn conformation, however, does not correspond to the structure of lowest conformational energy. Rather, the global minimum-energy conformation, recently determined by a new optimization technique developed in this laboratory, contains a type II′ β-bend that is formed by the interaction of the four residues Gly²-Gly³-Phe⁴-Met⁵. A similar minimum-energy conformation is found by the SMAPPS procedure. The thermodynamically preferred γ-turn structure has a conformational energy of 4.93 kcal/mole higher than the β-bend structure of lowest energy but, because of the inclusion of entropy in the SMAPPS procedure, it is estimated to be ～ 9 kcal/mole lower in free energy. The calculation of the average conformation of Met-enkephalin was repeated until a total of ten independent average conformations were established. As far as the phenylalanine residue of the pentapeptide is concerned, the results of the ten independent average conformations were all found to lie in the region of conformational space corresponding to the γ-turn. These results further support the conclusion that the γturn conformation is thermodynamically favored.     

Reversing-pulse electric birefringence of poly(γ-benzyl-L-glutamate). III. The temperature dependence of the transient and steady-state behavior in cyclohexanone

The reversing-pulse electric birefringence (RPEB) technique was applied to the study of the temperature effect on the electrooptical and hydrodynamic properties of a fractionated [Glu(OBzl)]_n sample, which is molecularly dissolved in cyclohexanone. The aim was to develop a standard analytical method for thermal denaturation and temperature-induced conformational transitions. The field-on reverse and steady-state signal, and the field-off decay signal, were measured at 535 nm and at a constant low field strength (ca. 3 kV/cm) over a wide temperature range (5–90°C). The steady-state birefringence and the relaxation time in the decay process were also measured at two constant temperatures (5 and 70°C) over a wide field strength range (E ≤ 20 kV/cm). By the combination of these two different sets of RPEB measurements, the unwanted effect of the high pulse field on polymer conformation at elevated temperatures could be minimized. Together with the density and viscosity of cyclohexanone measured between 5 and 95°C, the following quantities could be evaluated: the weight-average permanent dipole moment and polarizability anisotropy, the reduced optical anisotropy factor (Δg/n), the weight-average length, and the degree of polydispersity. All these quantities, except for Δg/n, were found to be almost independent of temperature (5–90°C) and concentration (1.54–4.27 mM).     

Synthèse et structure de la poly-O-carbobenzoxy L- tyrosine et de copolymères de O-carbobenzoxy L-tyrosine et de glutamate de benzyle ou d'aspartate de benzyle

The optical rotatory dispersion of copolymers of O-carbobenzoxy-L -tyrosine and benzyl L (or D )-glutamate as well as benzyl L -aspartate, dissolved in nonpolar solvent, has been studied. Moffitt's equation permits the determination of b₀ coefficients whose variation, with varying composition in amino acid residues, suggests that the molecules of poly-O-carbobenzoxy-L -tyrosine have a helical structure similar to that of poly-(benzyl L -glutamate). Results obtained from infrared spectroscopy and x-ray diffraction show that the copolymers possess a helical conformation in the solid state, even when they are very rich in carbobenzoxy-L -tyrosine residues. The value of the b₀, coefficient for poly-O-carbobenzoxy-L -tyrosine may be explained by a regular stacking of the chromophore groups around the helical backbone. The ordering of the molecules of this polymer in a purely helical structure seems favored by the insertion of a small number of foreign residues in the polypeptide chain.     

“Slim” Nucleosides and Nucleotides. I. Synthetic,Structural and Biophysical Investigations of Showdomycins

Abstract

A new, convenient, and short synthesis of 2′-deoxyshowdomycin, along with an improved procedure for the preparation of showdomycin, have been presented. A single-crystal X-ray structure of l-benzyl-2′-deoxyshowdomycin (9) has been reported. Conformational studies using C.D. indicated that showdomycin exists predominantly in an anti conformation in aqueous solution. Molecular mechanics calculations using AMBER point to comparable binding energy of showdomycin-adenosine pair with the natural uridine-adenosine pair, but with a significant base-ribose conformational deviation from the natural array in the former. Implications of such a conformational deviation on tumor and viral replications have been discussed. Base-pairing studies employing high resolution NMR spectroscopy indicate that both showdomycin and epishowdomycin base-pair with adenosine-5′-monophosphate (AMP); however, while showdomycin also shows evidence of stacking, that was absent in epishowdomycin. Molecular modeling studies using QUANTA/CHARMm show that showdomycin is capable of forming a homopolymer duplex by base-pairing with poly(A), but with a considerably broader and deeper major groove. A heteropolymer duplex with a single insert of showdomycin exhibits tighter coiling at the point of insertion. A ten-picosecond dynamics simulation of the above heteroduplex revealed relaxation of the helix with disruption of H- bonding for two base pairs on either side of the insertion point forming a large central cavity.     

Peptide Free Energy Landscapes Calibrated by Molecular Orbital Calculations

Free energy landscapes of peptide conformations werecalibrated by ab initiomolecular orbital calculations, after enhancedconformational sampling using the multicanonical molecular dynamicssimulations. Three different potentials of mean force for an isolateddipeptide were individually obtained using the conventional force fields,AMBER parm94, AMBER parm96, and CHARMm22. Each potential ofmean force was calibrated based on the umbrella sampling algorithm fromthe adiabatic energy map that was calculated separately by the abinitiomolecular orbital method. All the calibrated potentials of mean forcecoincided well. The calibration was applied to a peptide in explicit water,and the calibrated free energy landscapes did not depend on the force fieldused in conformational sampling, as far as the conformational space waswell sampled.