Metal immobilisation by biofilms: Mechanisms and analytical tools

In biofilm environments, heavy metal and radionuclide pollutants are removed by a variety of mechanisms, including biosorption, precipitation as sulfides or phosphates and microbial reductive precipitation. Even if the elemental composition and localization of the precipitate trapped in the biofilm is well described thanks to spectroscopic and microscopic techniques, this review highlights that little is known about metal immobilisation mechanisms in microbial biofilms, i.e., mass transfer of metals, mechanisms involved in (bio)sorption and precipitation and the influence of physicochemical micro-environments within the biofilm matrix. The review shows the advantage of using a combination of different techniques to evaluate the fate of metals within microbial biofilms. By combining a variety of techniques (e.g., selective extraction, microscopy, spectroscopy and miniaturised sensors ...), it is possible to gain high-resolution structural and chemical information of biofilms on a level of the individual cell. This approach will facilitate the characterization of the metal immobilisation sites and the metal sorption and (bio)crystallisation mechanisms in biofilms. The results provided by the combination of these techniques will allow to predict the amount of metal accumulation in biofilms as well as their chemical speciation. This review demonstrates that an interdisciplinary approach is required to study metal fate within the biofilm matrix. This revised version was published online in June 2006 with corrections to the Cover Date.     

Marine Biofilms as Mediators of Colonization by Marine Macroorganisms: Implications for Antifouling and Aquaculture

In the marine environment, biofilms on submerged surfaces can promote or discourage the settlement of invertebrate larvae and macroalgal spores. The settlement-mediating effects of biofilms are believed to involve a variety of biofilm attributes including surface chemistry, micro-topography, and a wide range of microbial products from small-molecule metabolites to high-molecular weight extracellular polymers. The settled organisms in turn can modify microbial species composition of biofilms and thus change the biofilm properties and dynamics. A better understanding of biofilm dynamics and chemical signals released and/or stored by biofilms will facilitate the development of antifouling and mariculture technologies. This review provides a brief account of 1) existing knowledge of marine biofilms that are relevant to settlement mediation, 2) biotechnological application of biofilms with respect to developing non-toxic antifouling technologies and improving the operation of aquaculture facilities, and 3) challenges and future directions for advancing our understanding of settlement-mediating functions of biofilms and for applying this knowledge to real-life situations.     

细菌生物被膜基质的研究进展

细菌生物被膜(biofilm)附着在生物或者非生物表面,由细菌及其分泌的糖、蛋白质和核酸等多种基质组成的细菌群落,是造成病原细菌持续性感染、毒力和耐药性的重要原因之一.细菌的生物被膜基质由复杂的胞外聚合物(extracellular polymeric substances,EPS)构成,影响生物被膜的结构和功能.本文...     

Identification of Bacillus subtilis SipW as a bifunctional signal peptidase that controls surface-adhered biofilm formation

Biofilms of microbial cells encased in an exopolymeric matrix can form on solid surfaces, but how bacteria sense a solid surface and upregulate biofilm genes is largely unknown. We investigated the role of the Bacillus subtilis signal peptidase, SipW, which has a unique role in forming biofilms on a solid surface and is not required at an air-liquid interface. Surprisingly, we found that the signal peptidase activity of SipW was not required for solid-surface biofilms. Furthermore, a SipW mutant protein was constructed that lacks the ability to form a solid-surface biofilm but still retains signal peptidase activity. Through genetic and gene expression tests, the non-signal peptidase role of SipW was found to activate biofilm matrix genes specifically when cells were on a solid surface. These data provide the first evidence that a signal peptidase is bifunctional and that SipW has a regulatory role in addition to its role as a signal peptidase.     

Disinfection in Food Processing – Efficacy Testing of Disinfectants

The key to effective cleaning and disinfection of food plants is the understanding of the type of the soil to be removed from the surfaces. An efficient cleaning and disinfection procedure consists of a sequence of rinses using good quality water with application of detergents and disinfectants. Disinfection is required in food plant operations, where wet surfaces provide favourable conditions for the growth of microbes. The efficacy of disinfectants is usually determined in suspensions, which do not mimic the growth conditions on surfaces where the agents are required to inactivate the microbes. Therefore, the suspension tests do not give adequate information and reliable carrier tests, which mimic surface growth, are needed. In developing a proposal for the testing of disinfectants on surfaces to an analytical standard, it is important to identify the major sources of variation in the procedure. In response to the need for a relatively realistic, simple and reliable test for disinfectant efficacy a method for culturing laboratory model biofilms has developed. The use of artificial biofilms i.e. biofilm-constructs inoculated with process contaminants in disinfectant testing can also be used for screening the activity of various disinfectants on biofilm cells. Both biofilm carrier tests showed clearly that the biofilm protects the microbes against the disinfectants. The chemical cleanliness is also essential in food plants. The total cleanliness of the process lines is mainly based on measuring the microbial load using culturing techniques. These results can give an incorrect picture of the total cleanliness, because the viable microbes do not grow when disinfectants are left on the surface. The luminescent bacteria light inhibition method offers a useful alternative for testing chemical residue left on surfaces after cleaning and disinfection operations.     

Multi-Channel Microfluidic Biosensor Platform Applied for Online Monitoring and Screening of Biofilm Formation and Activity

Bacterial colonization of surfaces and interfaces has a major impact on various areas including biotechnology, medicine, food industries, and water technologies. In most of these areas biofilm development has a strong impact on hygiene situations, product quality, and process efficacies. In consequence, biofilm manipulation and prevention is a fundamental issue to avoid adverse impacts. For such scenario online, non-destructive biofilm monitoring systems become important in many technical and industrial applications. This study reports such a system in form of a microfluidic sensor platform based on the combination of electrical impedance spectroscopy and amperometric current measurement, which allows sensitive online measurement of biofilm formation and activity. A total number of 12 parallel fluidic channels enable real-time online screening of various biofilms formed by different Pseudomonas aeruginosa and Stenotrophomonas maltophilia strains and complex mixed population biofilms. Experiments using disinfectant and antibiofilm reagents demonstrate that the biofilm sensor is able to discriminate between inactivation/killing of bacteria and destabilization of biofilm structures. The impedance and amperometric sensor data demonstrated the high dynamics of biofilms as a consequence of distinct responses to chemical treatment strategies. Gene expression of flagellar and fimbrial genes of biofilms grown inside the microfluidic system supported the detected biofilm growth kinetics. Thus, the presented biosensor platform is a qualified tool for assessing biofilm formation in specific environments and for evaluating the effectiveness of antibiofilm treatment strategies.     

牙菌斑生物膜的形成与控制

牙菌斑生物膜是附着于牙釉质表面,由复杂的微生物群落构成的一种聚集体。牙菌斑生物膜的形成与生长对口腔健康有着直接或间接的影响,许多研究证实口腔疾病如龋齿和牙周病都与细菌的积累及牙菌斑的形成有关。在牙菌斑生物膜形态建成过程中,牙齿表面最初的定殖菌对生物膜的微生物组成和结构至关重要,这些初级定殖菌决定了后续与之结合形成共生体的微生物种类和数量。不同的微生物组成可能在与生物膜形成相关的口腔病理状况中发挥不同的作用。因此,本文就牙菌斑生物膜的生长及控制进行综述,介绍其微生物的早期定殖和成熟过程、以及通过物理和化学方法对牙菌斑生物膜的控制,以期为了解牙菌斑生物膜的形成机制及相关口腔疾病的预防和治疗提供有价值的参考。     

Growth dependence of conjugation explains limited plasmid invasion in biofilms: an individual-based modelling study

Plasmid invasion in biofilms is often surprisingly limited in spite of the close contact of cells in a biofilm. We hypothesized that this poor plasmid spread into deeper biofilm layers is caused by a dependence of conjugation on the growth rate (relative to the maximum growth rate) of the donor. By extending an individual-based model of microbial growth and interactions to include the dynamics of plasmid carriage and transfer by individual cells, we were able to conduct in silico tests of this and other hypotheses on the dynamics of conjugal plasmid transfer in biofilms. For a generic model plasmid, we find that invasion of a resident biofilm is indeed limited when plasmid transfer depends on growth, but not so in the absence of growth dependence. Using sensitivity analysis we also find that parameters related to timing (i.e. a lag before the transconjugant can transfer, transfer proficiency and scan speed) and spatial reach (EPS yield, conjugal pilus length) are more important for successful plasmid invasion than the recipients' growth rate or the probability of segregational loss. While this study identifies one factor that can limit plasmid invasion in biofilms, the new individual-based framework introduced in this work is a powerful tool that enables one to test additional hypotheses on the spread and role of plasmids in microbial biofilms.     

Early colonization of thermal niches in a silica-depositing hot spring in central Tibet

Thermophilic microbial mats dominated by the anoxygenic phototroph Roseiflexus castenholzii commonly develop around sinter-depositing geysers in the Daggyai Tso geothermal field of central Tibet. In this study we used morphological and molecular genetic techniques to reveal a diverse pioneer biofilm community including both archaea and bacteria involved in early colonization of such thermal niches at temperatures ranging from 46 to 77 °C. Sinter precipitation and biomineralization were evident at all locations, but the latter was selective between taxa and most evident on filamentous cells. Evidence for possible indirect biosignatures from biofilms overwhelmed by sinter deposition was found. Succession to a mature community appeared to relate to the growth rate for key taxa outpacing that of silicification within an optimum temperature range of 54–61 °C. The thin surface layer of silicification-resistant cyanobacteria that developed on the surface of mature mats may play a role in preventing biomineralization of the susceptible R. castenholzii beneath within these communities.     

Cryptococcus neoformans biofilm formation depends on surface support and carbon source and reduces fungal cell susceptibility to heat, cold, and UV light

The fungus Cryptococcus neoformans possesses a polysaccharide capsule and can form biofilms on medical devices. We describe the characteristics of C. neoformans biofilm development using a microtiter plate model, microscopic examinations, and a colorimetric 2,3-bis(2-methoxy-4-nitro-5-sulfophenyl)-5-[(phenylamino) carbonyl]-2H-tetrazolium-hydroxide (XTT) reduction assay to observe the metabolic activity of cryptococci within a biofilm. A strong correlation between XTT and CFU assays was demonstrated. Chemical analysis of the exopolymeric material revealed sugar composition consisting predominantly of xylose, mannose, and glucose, indicating the presence of other polysaccharides in addition to glucurunoxylomannan. Biofilm formation was affected by surface support differences, conditioning films on the surface, characteristics of the medium, and properties of the microbial cell. A specific antibody to the capsular polysaccharide of this fungus was used to stain the extracellular polysaccharide matrix of the fungal biofilms using light and confocal microscopy. Additionally, the susceptibility of C. neoformans biofilms and planktonic cells to environmental stress was investigated using XTT reduction and CFU assays. Biofilms were less susceptible to heat, cold, and UV light exposition than their planktonic counterparts. Our findings demonstrate that fungal biofilm formation is dependent on support surface characteristics and that growth in the biofilm state makes fungal cells less susceptible to potential environmental stresses.     

Microbial landscapes: new paths to biofilm research

It is the best of times for biofilm research. Systems biology approaches are providing new insights into the genetic regulation of microbial functions, and sophisticated modelling techniques are enabling the prediction of microbial community structures. Yet it is also clear that there is a need for ecological theory to contribute to our understanding of biofilms. Here, we suggest a concept for biofilm research that is spatially explicit and solidly rooted in ecological theory, which might serve as a universal approach to the study of the numerous facets of biofilms.     

Formation of nesquehonite and other minerals as a consequence of biofilm dehydration

A microbial biofilm community was established over 971 days within gravel in an aquarium so as to model biofouling of an aquifer. When the water was allowed to evaporate slowly, white crystalline deposits, containing several carbonate and sulphate minerals including nesquehonite (MgCO₃.3H2O), were seen at the highest points on the surface of the biofouled gravel. No such deposits occurred in regions lacking biofilms. These crystals appeared to originate from evaporation of dissolved salts which had migrated through the biofilm. Surfaceadherent microbial biofilms may conceivably provide a conduit for solute transport in porous media such as soils and aquifers.     

Bacterial biofilms and surface fouling

Bacteria are attracted to surfaces. Their surface adhesion, with subsequent binary fission and exopolymer production, leads to the formation of biofilms. Such biofilms consist of bacterial cells in a matrix of their own exopolysaccharide glycocalyces. In addition to the bulk fluid and the surface, biofilms constitute a third physical phase. The close proximity of the bacterial cells in the biofilm matrices assists the formation of metabolically dependent consortia. The chemical and physical activities of these microbial communities produces a heterogeneous system at the colonised surface. Metabolites, produced at specific points on the surface, can lead to the development of effective anodes and cathodes at adjoining locations on the surface. In this way the fouling of a surface by bacterial biofilm development facilitates focal attack on that surface. This pit formation is characteristic of bacterial surface activities as diverse as dental decay and metal corrosion. In this review, we examine bacterial adhesion, biofilm formation and several instances of focal bacterial attack on colonised surfaces. However, pathogenic biofilms and the fouling of biological surfaces, with the exception of caries formation, is outside the scope of this paper.     

Development and characterization of a fiber optical fluorescence sensor for the online monitoring of biofilms and their microenvironment

The growth of microorganisms on surfaces and interfaces as a biofilm is very common and plays important role in various areas such as material science, biomedicine, or waste treatment among others. Due to their inhomogeneous structure and the variance in the microorganism consortium, the analysis of biofilms represents a significant challenge. An online fluorescence sensor was developed that is able to measure the most important biological fluorophores (proteins, nicotinamide adenine dinucleotide, and flavin) in a noninvasive manner in biofilms, e.g. in bioelectrochemical applications. The sensor gives the opportunity to continuously draw conclusions on the metabolic state of the biofilm. The developed sensor has a diameter of 1 mm at the sensor tip and can be moved on and into the biofilm surface. In the first experiment, the measuring range of the sensor and the long‐term stability could be determined and the system applicability was confirmed. In addition, measurements in biofilm‐like structures could be performed. The formation of a wastewater‐based biofilm was monitored using the developed sensor, demonstrating the functionality of the sensor in a proof‐of‐principle experiment.     

Protists with different feeding modes change biofilm morphology

The effect of Dexiostoma (filter feeder), Vannella, Chilodonella (raptorial feeders), Spumella , and Neobodo (direct interception feeders) on the morphology of multispecies bacterial biofilms was investigated in small flow cells. The filter feeder Dexiostoma campylum did not alter biofilm volume and porosity but stimulated the formation of larger microcolonies compared with ungrazed biofilms. In contrast, the raptorial feeder Vannella sp. efficiently grazed bacteria from the biofilm surface, leading to smaller microcolonies and lower maximal and basal layer thickness compared with ungrazed biofilms. Microcolony formation was not stimulated in the presence of the sessile Spumella sp. Chilodonella uncinata rasped bacteria from the outer surface leading to mushroom-shaped microcolonies. In the presence of C. uncinata and Spumella sp., the biofilm volume was 2.5–6.3 times lower compared with ungrazed biofilms. However, the biofilm porosity and the ratio of biofilm surface area to biofilm volume were 1.5–3.7 and 1.2–1.8 times higher, respectively. Thus, exchange of nutrients and gases between the biofilm and its surrounding fluid should also be improved in deeper biofilm layers, hence accelerating microbial growth.     

Heterogeneity in biofilms

Biofilms, accumulations of microorganisms at interfaces, have been described for every aqueous system supporting life. The structure of these microbial communities ranges from monolayers of scattered single cells to thick, mucous structures of macroscopic dimensions (microbial mats; algal-microbial associations; trickling filter biofilms). During recent years the structure of biofilms from many different environments has been documented and evaluated by use of a broad variety of microscopic, physico-chemical and molecular biological techniques, revealing a generally complex 3D structure. Parallel to these investigations more and more complex mathematical models and simulations were developed to explain the development, structures, and interactions of biofilms. The forces determining the spatial structure of biofilms, including microcolonies, extracellular polymeric substances (EPS), and channels, are still the subject of controversy. To achieve conclusive explanations for the structures observed in biofilms the cooperation of both fields of investigation, modelling and experimental research, is necessary. The expanding field of molecular techniques not only allows more and more detailed documentation of the spatial distribution of species, but also of functional activities of single cells in their biofilm environment. These new methods will certainly reveal new insights in the mechanisms involved in the developmental processes involved in the formation and behavior of biofilms.     

Use of Nanoscale Materials for the Effective Prevention and Extermination of Bacterial Biofilms

Biofilms have been shown to cause most human infections. The prevention and extermination of bacterial biofilms has always presented a major challenge in the clinic. The failure of traditional antibiotics and the development of bacterial resistance against these measures is on the rise. Nanoscale materials possess the advantage of presenting enhanced surface properties of bulk materials, and are emerging as effective agents for deterring microbial growth. This review article summarizes the fundamentals of bacterial growth, biofilm formation, mechanisms for antibacterial technologies, and usage of nanoparticles for the prevention and extermination of biofilms. Further research is required with respect to the appropriate usage of nanoparticles for the effective control of biofilms to save human lives and reduce healthcare costs.     

A novel planar flow cell for studies of biofilm heterogeneity and flow-biofilm interactions

Biofilms are microbial communities growing on surfaces, and are ubiquitous in nature, in bioreactors, and in human infection. Coupling between physical, chemical, and biological processes is known to regulate the development of biofilms; however, current experimental systems do not provide sufficient control of environmental conditions to enable detailed investigations of these complex interactions. We developed a novel planar flow cell that supports biofilm growth under complex two-dimensional fluid flow conditions. This device provides precise control of flow conditions and can be used to create well-defined physical and chemical gradients that significantly affect biofilm heterogeneity. Moreover, the top and bottom of the flow chamber are transparent, so biofilm growth and flow conditions are fully observable using non-invasive confocal microscopy and high-resolution video imaging. To demonstrate the capability of the device, we observed the growth of Pseudomonas aeruginosa biofilms under imposed flow gradients. We found a positive relationship between patterns of fluid velocity and biofilm biomass due to faster microbial growth under conditions of greater local nutrient influx, but this relationship eventually reversed because high hydrodynamic shear leads to the detachment of cells from the surface. These results reveal that flow gradients play a critical role in the development of biofilm communities. By providing new capability for observing biofilm growth, solute and particle transport, and net chemical transformations under user-specified environmental gradients, this new planar flow cell system has broad utility for studies of environmental biotechnology and basic biofilm microbiology, as well as applications in bioreactor design, environmental engineering, biogeochemistry, geomicrobiology, and biomedical research.     

Next-Generation Pyrosequencing Analysis of Microbial Biofilm Communities on Granular Activated Carbon in Treatment of Oil Sands Process-Affected Water

The development of biodegradation treatment processes for oil sands process-affected water (OSPW) has been progressing in recent years with the promising potential of biofilm reactors. Previously, the granular activated carbon (GAC) biofilm process was successfully employed for treatment of a large variety of recalcitrant organic compounds in domestic and industrial wastewaters. In this study, GAC biofilm microbial development and degradation efficiency were investigated for OSPW treatment by monitoring the biofilm growth on the GAC surface in raw and ozonated OSPW in batch bioreactors. The GAC biofilm community was characterized using a next-generation 16S rRNA gene pyrosequencing technique that revealed that the phylum Proteobacteria was dominant in both OSPW and biofilms, with further in-depth analysis showing higher abundances of Alpha- and Gammaproteobacteria sequences. Interestingly, many known polyaromatic hydrocarbon degraders, namely, Burkholderiales, Pseudomonadales, Bdellovibrionales, and Sphingomonadales, were observed in the GAC biofilm. Ozonation decreased the microbial diversity in planktonic OSPW but increased the microbial diversity in the GAC biofilms. Quantitative real-time PCR revealed similar bacterial gene copy numbers (>10⁹ gene copies/g of GAC) for both raw and ozonated OSPW GAC biofilms. The observed rates of removal of naphthenic acids (NAs) over the 2-day experiments for the GAC biofilm treatments of raw and ozonated OSPW were 31% and 66%, respectively. Overall, a relatively low ozone dose (30 mg of O₃/liter utilized) combined with GAC biofilm treatment significantly increased NA removal rates. The treatment of OSPW in bioreactors using GAC biofilms is a promising technology for the reduction of recalcitrant OSPW organic compounds.