Microdevice‐based solid‐phase polymerase chain reaction for rapid detection of pathogenic microorganisms

We demonstrate the integration of DNA amplification and detection functionalities developed on a lab‐on‐a‐chip microdevice utilizing solid‐phase polymerase chain reaction (SP‐PCR) for point‐of‐need (PON) DNA analyses. First, the polycarbonate microdevice was fabricated by thermal bonding to contain microchambers as reservoirs for performing SP‐PCR. Next, the microchambers were subsequently modified with polyethyleneimine and glutaraldehyde for immobilizing amine‐modified forward primers. During SP‐PCR, the immobilized forward primers and freely diffusing fluorescence‐labeled reverse primers cooperated to generate target amplicons, which remained covalently attached to the microchambers for the fluorescence detection. The SP‐PCR microdevice was used for the direct identifications of two widely detected foodborne pathogens, namely Salmonella spp. and Staphylococcus aureus, and an alga causing harmful algal blooms annually in South Korea, Cochlodinium polykrikoides. The SP‐PCR microdevice would be versatilely applied in PON testing as a universal platform for the fast identification of foodborne pathogens and environmentally threatening biogenic targets.     

Direct solid phase sequencing of genomic and plasmid DNA using magnetic beads as solid support.

Approaches to direct solid phase sequencing of genomic and plasmid DNA have been developed using magnetic beads, coated with streptavidin, as solid support. The DNA is immobilized through selective incorporation of biotin into one of the strands. A single stranded template, suitable for sequencing, is obtained through strand-specific elution. Using this concept, in vitro amplified plasmid DNA and chromosomal DNA were sequenced directly from single colonies. The solid phase approach ensures that the amplification and the sequencing reactions can be performed under optimal conditions. The system was found to be suitable for sequencing using both isotope- and fluorescent-labelled primers.     

Colorimetric quantification of in vitro-amplified template DNA to be used for solid phase sequencing.

A protocol for colorimetric determination of DNA amplified by the polymerase chain reaction (PCR) and subsequently immobilized to a solid support is described. The protocol consists of three steps: (i) binding of PCR amplified lac operator-containing DNA to magnetic beads; (ii) binding of a Lac repressor-beta-galactosidase fusion protein to the lac operator and (iii) colorimetric detection of the immobilized beta-galactosidase. In practice, steps (i) and (ii) are performed concurrently. The protocol is well suited both for manual and automated procedures and the immobilized template can, after melting, be used directly for solid phase sequencing. The assay is used to demonstrate that template concentration is important for the quality of sequence data obtained from an automated DNA sequencer.     

Salicylhydroxamic Acid Functionalized Affinity Membranes for Specific Immobilization of Proteins and Oligonucleotides

Immobilization of proteins and other biological macromolecules on solid supports is a method suitable for purification or screening applications in life science research. Prolinx, Inc. has developed a novel chemical affinity system that can be used for specific immobilization of proteins and other macromolecules via interaction of two small synthetic molecules, phenyldiboronic acid (PDBA) and salicylhydroxamic acid (SHA). This report describes immobilization applications of activated microporous membranes that have been functionalized with SHA derivatives. These SHA-membranes exhibit high capacity and specificity for binding of PDBA-labeled nucleic acids and proteins. Conjugation of active protein with PDBA is performed in solution independent of the immobilization step on SHA membranes. The resulting PDBA–protein conjugate is immobilized directly without purification and retains biological activity. PDBA conjugates may also be released from these SHA-affinity membranes in a controlled manner. Capture and release of PBA-modified oligonucleotides is also demonstrated. SHA-membranes can be used as surfaces for microarrays, and are therefore compatible with high-throughput analyses. These properties make them useful for development of numerous preparative or screening applications.     

Multi-node graphs: a framework for multiplexed biological assays.

Multiplex polymerase chain reaction (PCR) is an extension of the standard PCR protocol in which primers for multiple DNA loci are pooled together within a single reaction tube, enabling simultaneous sequence amplification, thus reducing costs and saving time. Potential cost saving and throughput improvements directly depend on the level of multiplexing achieved. Designing reliable and highly multiplexed assays is challenging because primers that are pooled together in a single reaction tube may cross-hybridize, though this can be addressed either by modifying the choice of primers for one or more amplicons, or by altering the way in which DNA loci are partitioned into separate reaction tubes. In this paper, we introduce a new graph formalism called a multi-node graph, and describe its application to the analysis of multiplex PCR scalability. We show, using random multi-node graphs that the scalability of multiplex PCR is constrained by a phase transition, suggesting fundamental limits on efforts to improve the cost-effectiveness and throughput of standard multiplex PCR assays. In particular, we show that when the multiplexing level of the reaction tubes is roughly theta(log (sn)) (where s is the number of primer pair candidates per locus and n is the number of loci to be amplified), then with very high probability we can 'cover' all loci with a valid assignment to one of the tubes in the assay. However, when the multiplexing level of the tube exceeds these bounds, there is no possible cover and moreover the size of the cover drops dramatically. Simulations using a simple greedy algorithm on real DNA data also confirm the presence of this phase transition. Our theoretical results suggest, however, that the resulting phase transition is a fundamental characteristic of the problem, implying intrinsic limits on the development of future assay design algorithms.     

Digoxigenin-labelled peptide nucleic acid to detect lactobacilli PCR amplicons immobilized on membranes from denaturing gradient gel electrophoresis

AIMS: To develop a digoxigenin (DIG)-labeled peptide nucleic acid (PNA) probe for the detection of Lactobacillus-related genera amongst eubacterial amplicons obtained from vaginal samples using denaturing gradient gel electrophoresis (DGGE) blots. METHODS AND RESULTS: Part of the 16S rRNA gene sequence was used as a target for the PNA probe. After confirming probe specificity using chromosomal DNA from species and isolates that have been detected in the urogenital tract, it was successfully used to detect lactobacilli amplicons generated using eubacterial-specific 16S rRNA gene-targeted primers from vaginal tract samples immobilized on membranes from DGGE. CONCLUSIONS: The Lactobacillus-specific PNA probe could distinguish between DNA fragments from lactobacilli in a DGGE gel from other bacterial species, including those that migrated to a similar position. SIGNIFICANCE AND IMPACT OF THE STUDY: The use of the DIG-labelled PNA probe on blots of eubacterial PCR products from DGGE gels can be used to specifically detect lactobacilli in complex vaginal samples.     

Multiple displacement amplification of isolated DNA from human gallstones: molecular identification of Helicobacter DNA by means of 16S rDNA-based pyrosequencing analysis

BACKGROUND: Molecular typing of Helicobacter spp. in clinical biopsy specimens has become increasingly important. By means of nested polymerase chain reaction (PCR) amplification and Southern blot analysis of the PCR amplicons, we have shown that Helicobacter spp. DNA is present in human gallstones. In this study we have investigated the possibility of using multiple displacement amplification (MDA) of isolated gallstone DNA and pyrosequencing analysis for the molecular identification of Helicobacter spp. MATERIALS AND METHODS: DNA isolated from the nucleus of 33 human gallstones and one control strain were used in a MDA assay. Subsequently, pyrosequencing analysis was performed either directly on MDA-DNA using primers flanking the Helicobacter spp. 16S rDNA variable V3 region or on PCR amplicons derived from broad-range primers flanking the 16S rDNA variable V3, V4, and V9 regions. RESULTS: Pyrosequencing analysis of 16S rDNA derived from MDA-DNA revealed that Helicobacter spp.-like DNA was present in 25 of 33 (approximately 76%) gallstones. Using an H. pylori-specific Southern blot analysis, Helicobacter spp.-like DNA was present in 20 of 33 [approximately 61%] of the gallstones. Using MDA-DNA directly in pyrosequencing analysis, Helicobacter spp.-like DNA was present in 13 of 33 [approximately 39%] gallstones. CONCLUSIONS: We conclude that multiple displacement amplification combined with pyrosequencing enables a rapid and accurate molecular typing of Helicobacter spp. from small and precious biopsy specimens.     

Immobilization of enzymes with polyaziridines.

A novel method of enzyme immobilization using a low molecular weight prepolymer of tri-functional aziridines which can immobilize enzymes both by covalent attachment and entrapment within a gel matrix is described. The enzymes are immobilized on a solid support and exhibit an excellent retention of enzymatic activity. The immobilization procedure is essentially a single step process which can be easily performed at room temperature or 4 degrees C in either aqueous solution or in an inert organic solvent. The polyaziridines used in the immobilization are nontoxic, available in bulk at low cost and completely miscible with water and many organic solvents, thus providing one of the most satisfactory methods of immobilization available.     

2'-MeO-RNA containing oligodeoxyribonucleotide primers can prevent template-independent base extension on microarrays

DNA microarrays require tens of thousands of deoxyoligonucleotides to be registered in an addressable fashion through immobilization, so that they have the high-throughput capability of analyzing a large number of samples simultaneously in a minimal volume of each reagent. However, using immobilized DNA molecules on microarrays can impose certain technical problems for some assays. For example, high background noise has been observed in using immobilized oligonucleotide microarrays (DNA chip) for primer extension reactions. This noise may be associated with the reactions of secondary structures formed by the adjacent primers physically constrained on the surface. Single-base extension (SBE) of arrayed primers on a chip has been extensively used in mini-sequencing to examine single nucleotide polymorphisms (SNP). Some primers appeared to be extendable in the absence of any template and thus competed against the base extension directed by. the assay target such as genomic DNA. In this article, a method is reported that is capable of reducing template-independent extension by the substitution of a 2'-methoxyribonucleotide in the otherwise oligodeoxyribonucleotide primer. The surrogate compound placed at the 5'-end of the putative secondary structure sequence of a given primer was able to inhibit template-independent extension and to improve data quality of surface-attached primer extension assays.     

寡核苷酸DNA Microarray用于HLA DRB1基因分型的研究

对寡核苷酸DNA Microarray用于HLA DRB1基因分型的技术进行研究。常规的酚/氯仿法提取标准血样基因组DNA,在DRB1的exon2区域设计一对引物,经PCR扩增基因组相应区段并用Cy5-dCTP进行标记。设计寡核苷酸分型探针,将探针固定在APS-PDC法制作的DNA Microarray上,用标记的PCR产物与之杂交,扫描仪对杂交效果进行扫描,Imagene软件对杂交图像进行分析。共检测了33例标准血样的HLA DRB1基因型。检测结果证明研制的DNA Microarray准确、灵敏。DNA Microarray技术可以有效地检测DRB1等位基因,对比常规的PCR-SSP和PCR-SSO方法、分型基因芯片方法更为直观,并有集成化优势。     

On-chip PCR amplification of very long templates using immobilized primers on glassy surfaces

In this paper we describe a novel method for visualizing very long DNA fragments (for example >6 kb) which are difficult to spot with commonly used arrayers or capillary samplers with very small nanoliter volumes, using directly bound primers on "on-chip" polymerase chain reaction (PCR). We have used the genomes of the M13 bacteriophage (7.2 kb) the human mitochondrion (16.5 kb) as examples of long DNA templates to test the PCR and were able to elicit robust reactivity. Over 75% of the immobilized primers could be elongated to their fullest extent. In addition we were able to elicit the PCR reaction with double stranded templates in which one primer was immobilized and the other suspended in the reaction solution. These synthesized PCR products were visualized by either confocal microarray scanning or fluorescence microscopy using Cy5-dye fluorescence of the modified free primer, or the fluorescence of intercalating dyes.     

Dramatic increase in the signal and sensitivity of detection <Emphasis Type="Italic">via</Emphasis> self-assembly of branched DNA

In molecular testing using PCR, the target DNA is amplified via PCR and the sequence of interest is investigated via hybridization with short oligonucleotide capture probes that are either in a solution or immobilized on solid supports such as beads or glass slides. In this report, we report the discovery of assembly of DNA complex(es) between a capture probe and multiple strands of the PCR product. The DNA complex most likely has branched structure. The assembly of branched DNA was facilitated by the product of asymmetric PCR. The amount of branched DNA assembled was increased five fold when the asymmetric PCR product was denatured and hybridized with a capture probe all in the same PCR reaction mixture. The major branched DNA species appeared to contain three reverse strands (the strand complementary to the capture probe) and two forward strands. The DNA was sensitive to S1 nuclease suggesting that it had single-stranded gaps. Branched DNA also appeared to be assembled with the capture probes immobilized on the surface of solid support when the product of asymmetric PCR was hybridized. Assembly of the branched DNA was also increased when hybridization was performed in complete PCR reaction mixture suggesting the requirement of DNA synthesis. Integration of asymmetric PCR, heat denaturation and hybridization in the same PCR reaction mixture with the capture probes immobilized on the surface of solid support achieved dramatic increase in the signal and sensitivity of detection of DNA. Such a system should be advantageously applied for development of automated process for detection of DNA.     

2′-MeO-RNA Containing Oligodeoxyribonucleotide Primers Can Prevent Template-independent Base Extension on Microarrays

DNA microarrays require tens of thousands of deoxyoligonucleotides to be registered in an addressable fashion through immobilization, so that they have the high-throughput capability of analyzing a large number of samples simultaneously in a minimal volume of each reagent. However, using immobilized DNA molecules on microarrays can impose certain technical problems for some assays. For example, high background noise has been observed in using immobilized oligonucleotide microarrays (DNA chip) for primer extension reactions. This noise may be associated with the reactions of secondary structures formed by the adjacent primers physically constrained on the surface. Single-base extension (SBE) of arrayed primers on a chip has been extensively used in mini-sequencing to examine single nucleotide polymorphisms (SNP). Some primers appeared to be extendable in the absence of any template and thus competed against the base extension directed by the assay target such as genomic DNA. In this article, a method is reported that is capable of reducing template-independent extension by the substitution of a 2′-methoxyribonucleotide in the otherwise oligodeoxyribonucleotide primer. The surrogate compound placed at the 5′-end of the putative secondary structure sequence of a given primer was able to inhibit template-independent extension and to improve data quality of surface-attached primer extension assays.     

A tailed PCR procedure for cost-effective, two-order multiplex sequencing of candidate genes in polyploid plants

Complex polyploid crop genomes can be recalcitrant towards conventional DNA sequencing approaches for allele mining in candidate genes for valuable traits. In the past, this has greatly complicated the transfer of knowledge on promising candidate genes from model plants to even closely related polyploid crops. Next-generation sequencing offers diverse solutions to overcome such difficulties. Here, we present a method for multiplexed 454 sequencing in gene-specific PCR amplicons that can simultaneously address multiple homologues of given target genes. We devised a simple two-step PCR procedure employing a set of barcoded M13/T7 universal fusion primers that enable a cost-effective and efficient amplification of large numbers of target gene amplicons. Sequencing-ready amplicons are generated that can be simultaneously sequenced in pools comprising multiple amplicons from multiple genotypes. High-depth sequencing allows resolution of the resulting sequence reads into contigs representing multiple homologous loci, with only insignificant off-target capture of paralogues or PCR artefacts. In a case study, the procedure was tested in the complex polyploid genome of Brassica napus for a set of nine genes identified in Arabidopsis as candidates for regulation of seed development and oil content. Up to six copies of these genes were expected in B.?napus. SNP discovery was performed by pooled multiplex sequencing of 30 amplicons in 20 diverse B.?napus accessions with interesting trait variation for oil content, providing a basis for comparative mapping to relevant quantitative trait loci and for subsequent marker-assisted breeding.     

Comparison of DNA extraction from cervical cells collected in PreservCyt solution for the amplification of Chlamydia trachomatis

OBJECTIVE: The aim of this study was to compare and evaluate three methods of DNA extraction for the amplification of Chlamydia trachomatis in uterine cervical samples collected in PreservCyt solution. ThinPrep is the trade name for the slide preparation. METHODS: Thirty-eight samples collected in LCx buffer medium, which were identified as C. trachomatis infected by ligase chain reaction (LCR), were selected for this study. DNA from the PreservCyt samples was extracted by three methods: (i) QIAamp kit, (ii) boiling in Tris-EDTA buffer with Chelex purification, and (iii) Proteinase K digestion with Chelex purification. Sample DNA was tested for the presence of C. trachomatis by PCR using cryptic plasmid research (CTP) primers and major outer membrane protein research momp gene (MOMP) primers. Real-time (LightCycler) PCR for relative C. trachomatis quantification following DNA extraction was performed using primers (Hsp 60) for the 60 kDa heat-shock protein hsp60 gene. RESULTS: Amplification using CTP primers was the most successful with each of the extraction protocols. Boiling in buffer was the least successful extraction method. QIAamp was the best extraction method, yielding the most positives with both the CTP and MOMP primers. Proteinase K-Chelex extraction gave similar sensitivity to QIAamp extraction with CTP primers but lower for MOMP primers. CONCLUSIONS: The DNA extraction method must be carefully selected to ensure that larger PCR amplicons can be successfully produced by PCR and to ensure high sensitivity of detection of C. trachomatis. In this study it was found that the QIAamp extraction method followed by PCR with the CTP primers was the most successful for amplification of C. trachomatis DNA.     

Protocols for metagenomic DNA extraction and Illumina amplicon library preparation for faecal and swab samples

Next‐generation sequencing (NGS) technology has extraordinarily enhanced the scope of research in the life sciences. To broaden the application of NGS to systems that were previously difficult to study, we present protocols for processing faecal and swab samples into amplicon libraries amenable to Illumina sequencing. We developed and tested a novel metagenomic DNA extraction approach using solid phase reversible immobilization (SPRI) beads on Western Bluebird (Sialia mexicana) samples stored in RNAlater. Compared with the MO BIO PowerSoil Kit, the current standard for the Human and Earth Microbiome Projects, the SPRI‐based method produced comparable 16S rRNA gene PCR amplification from faecal extractions but significantly greater DNA quality, quantity and PCR success for both cloacal and oral swab samples. We furthermore modified published protocols for preparing highly multiplexed Illumina libraries with minimal sample loss and without post‐adapter ligation amplification. Our library preparation protocol was successfully validated on three sets of heterogeneous amplicons (16S rRNA gene amplicons from SPRI and PowerSoil extractions as well as control arthropod COI gene amplicons) that were sequenced across three independent, 250‐bp, paired‐end runs on Illumina's MiSeq platform. Sequence analyses revealed largely equivalent results from the SPRI and PowerSoil extractions. Our comprehensive strategies focus on maximizing efficiency and minimizing costs. In addition to increasing the feasibility of using minimally invasive sampling and NGS capabilities in avian research, our methods are notably not avian‐specific and thus applicable to many research programmes that involve DNA extraction and amplicon sequencing.     

Energy transfer cassettes for facile labeling of sequencing and PCR primers

Fluorescence energy transfer (ET) primers and terminators are the reagents of choice for multiplex DNA sequencing and analysis. We present here the design, synthesis and evaluation of a four-color set of ET cassettes, fluorescent labeling reagents that can be quantitatively coupled to a thiol-activated target through a disulfide exchange reaction. The ET cassette consists of a sugar-phosphate spacer with a FAM donor at the 3'-end, an acceptor linked to a modified T-base at the 5'-end of the spacer and a mixed disulfide for coupling to a thiol at the 5'-end. The acceptor dye emission intensities of ET labeled primers produced in this manner are comparable to commercial ET primers. The utility of our ET cassette-labeled primers is demonstrated by performing four-color capillary electrophoresis sequencing with the M13(-21)forward primer and by generating and analyzing a set of single-nucleotide-polymorphism-specific PCR amplicons.     

Detection of PCR amplicons from bacterial pathogens using microsphere agglutination

For rapid and inexpensive detection of polymerase chain reaction (PCR) amplicons, a novel microsphere agglutination assay has been developed. PCR is carried out using biotinylated forward and reverse primers, and the amplified DNA fragments are able to agglutinate streptavidin-coated microspheres (5.7 microm in diameter). Purification of PCR amplicons is unnecessary when initial primer concentrations are 250 nM. Agglutination can be identified visually within 2 min without any additional equipment or reagents. Using listeriolysin (lisA)-specific biotinylated primers, we have successfully detected and identified Listeria monocytogenes lisA+ cells among Salmonella typhimurium, Staphylococcus aureus, Campylobacter jejuni and Escherichia coli O157:H7 cells. The simplicity of this protocol considerably reduces the time and cost of diagnostic PCR experiments. This procedure is potentially useful for various studies and field applications.