Fermentation of glycerol by Clostridium pasteurianum--batch and continuous culture studies

The fermentation of glycerol by Clostridium pasteurianum was studied with respect to product formation as influenced by the culture conditions. In the majority of batch cultures, butanol was the main fermentation product, but a varying fraction of glycerol was also converted to 1,3-propanediol, butyric and acetic acids and ethanol. More than 60 g/l glycerol was utilized, and up to 17 g/l butanol was produced. Fed-batch cultures did not offer an advantage. When molecular nitrogen was used as a nitrogen source, the fermentation time was prolonged by a factor of 1.5. Fermentations at constant pH values between 4.5 and 7.5 did not reveal significant differences in product formation except for an increase in the ethanol content starting at pH 6.5. Chemostat cultures also yielded predominantly n-butanol, but in some fermentations, the 1,3-propanediol fraction was relatively high. The pH auxostat cultures, which were operated at a glycerol excess, contained 1,3-propanediol as the main product. As a whole, the fermentations were characterized by a certain variability in product formation under seemingly equal or slightly varied conditions. It appears that the regulation of the numerous fermentation pathways occurring in this organism is not very strict. Journal of Industrial Microbiology & Biotechnology (2001) 27, 18–26. Received 25 September 2000/ Accepted in revised form 07 April 2001     

Fermentation of raw glycerol to 1,3-propanediol by new strains ofClostridium butyricum

Industrial glycerol obtained through the transesterification process using rapeseed oil did not support growth of several strains ofClostridium butyricum obtained from bacterial culture collections. Ten new strains ofC. butyricum were obtained from mud samples from a river, a stagnant pond, and a dry canal. These new isolates fermented the commercial glycerol and produced 1,3-propanediol as a major fermentation product with concomitant production of acetic and butyric acids. Four of the ten isolates were able to grow on industrial glycerol obtained from rapeseed oil. One strain,C. butyricum E5, was very resistant to high levels of glycerol and 1,3-propanediol. Using fed-batch fermentation, 109 g L^–1 of industrial glycerol were converted into 58 g of 1,3-propanediol, 2.2 g of acetate and 6.1 g of butyrate per liter.     

补料分批发酵过程中两阶段发酵生产1,3-丙二醇

在补料分批发酵过程中提高比生长速率不仅减少乙醇、甲酸的生成,而且提高1,3-丙二醇的得率和比生产速率.发酵后期甘油的浓度在15～26 g/L时有利于提高1,3-丙二醇的生产.采取在发酵前期控制菌体较高比生长速率和发酵后期控制适宜甘油浓度相结合的策略,有效地提高了1,3-丙二醇的生产,降低副产物乳酸和乙醇的生成.     

Effects of Acetate and Butyrate During Glycerol Fermentation by Clostridium butyricum

The effects of acetate and butyrate during glycerol fermentation to 1,3-propanediol at pH 7.0 by Clostridium butyricum CNCM 1211 were studied. At pH 7.0, the calculated quantities of undissociated acetic and butyric acids were insufficient to inhibit bacterial growth. The initial addition of acetate or butyrate at concentrations of 2.5 to 15 gL⁻¹ had distinct effects on the metabolism and growth of Clostridium butyricum. Acetate increased the biomass and butyrate production, reducing the lag time and 1,3-propanediol production. In contrast, the addition of butyrate induced an increase in 1,3-propanediol production (yield: 0.75 mol/mol glycerol, versus 0.68 mol/mol in the butyrate-free culture), and reduced the biomass and butyrate production. It was calculated that reduction of butyrate production could provide sufficient NADH to increase 1,3-propanediol production. The effects of acetate and butyrate highlight the metabolic flexibility of Cl. butyricum CNCM 1211 during glycerol fermentation. Received: 2 January 2001 / Accepted: 6 February 2001     

High production of 1,3-propanediol from industrial glycerol by a newly isolated Clostridium butyricum strain

Batch and continuous cultures of a newly isolated Clostridium butyricum strain were carried out on industrial glycerol, the major by-product of the bio-diesel production process. For both types of cultures, the conversion yield obtained was around 0.55 g of 1,3-propanediol formed per 1 g of glycerol consumed whereas the highest 1,3-propanediol concentration, achieved during the single-stage continuous cultures was 35-48 g l-1. Moreover, the strain presented a strong tolerance at the inhibitory effect of the 1,3-propanediol, even at high concentrations of this substance at the chemostat (e.g. 80 g l-1). 1,3-Propanediol was associated with cell growth whereas acetate and butyrate seemed non growth-associated products. At low and medium dilution rates (until 0.1 h-1), butyrate production was favoured, whereas at higher rates acetate production increased. The maximum 1,3-propanediol volumetric productivity obtained was 5.5 g l-1 h-1. A two-stage continuous fermentation was also carried out. The first stage presented high 1,3-propanediol volumetric productivity, whereas the second stage (with a lower dilution rate) served to further increase the final product concentration. High 1,3-propanediol concentrations were achieved (41-46 g l-1), with a maximum volumetric productivity of 3.4 g l-1 h-1. A cell concentration decrease was reported between the second and the first fermentor.     

Isolation of a solventogenic Clostridium sp. strain: Fermentation of glycerol to n-butanol,analysis of the bcs operon region and its potential regulatory elements

A new solventogenic bacterium, strain GT6, was isolated from standing water sediment. 16S-rRNA gene analysis revealed that GT6 belongs to the heterogeneous Clostridium tetanomorphum group of bacteria exhibiting 99% sequence identity with C. tetanomorphum 4474^T. GT6 can utilize a wide range of carbohydrate substrates including glucose, fructose, maltose, xylose and glycerol to produce mainly n-butanol without any acetone. Additional products of GT6 metabolism were ethanol, butyric acid, acetic acid, and trace amounts of 1,3-propanediol. Medium and substrate composition, and culture conditions such as pH and temperature influenced product formation. The major fermentation product from glycerol was n-butanol with a final concentration of up to 11.5 g/L. 3% (v/v) glycerol lead to a total solvent concentration of 14 g/L within 72 h. Growth was not inhibited by glycerol concentrations as high as 15% (v/v).     

High production of 1,3-propanediol from glycerol by Clostridium butyricum VPI 3266 in a simply controlled fed-batch system

Summary A simple fed-batch system which controls substrate feeding by measuring the CO₂ produced during the fermentation, was developped. This Fed-batch approach allowed high production of 1,3-propanediol from glycerol by Clostridium butyricum by avoiding substrate inhibition phenomena. 65 g/l of 1,3-propanediol was produced with a productivity of 1.21 g/l.h and a yield of 0.56. The concentration of 1,3-propanediol obtained and the productivity were significantly higher than those reached in batch culture.     

Efficient production of 1,3-propanediol from fermentation of crude glycerol with mixed cultures in a simple medium

The objective of this study was to examine the applicability of mixed cultures for 1,3-propanediol (1,3-PDO) production from crude glycerol. Three different sources of mixed cultures were tested, where the mixed culture from a municipal wastewater treatment plant showed the best results. 1,3-PDO can be produced as the main product in this mixed culture with typical organic acids like acetic and butyric acids as by-products. The yield was in the range of 0.56–0.76 mol 1,3-PDO per mol glycerol consumed depending on the glycerol concentration. A final product concentration as high as 70 g/L was obtained in fed-batch cultivation with a productivity of 2.6 g/L h. 1,3-PDO can be kept in the culture several days after termination of the fermentation without being degraded. Degradation tests showed that 1,3-PDO is degraded much slower than other compounds in the fermentation broth. In comparison to 1,3-PDO production in typical pure cultures, the process developed in this work with a mixed culture achieved the same levels of product titer, yield and productivity, but has the decisive advantage of operation under complete non-sterile conditions. Moreover, a defined fermentation medium without yeast extract can be used and nitrogen gassing can be omitted during cultivation, leading to a strong reduction of investment and production costs.     

3-Hydroxypropionaldehyde guided glycerol feeding strategy in aerobic 1,3-propanediol production by <Emphasis Type="Italic">Klebsiella pneumoniae</Emphasis>

3-Hydroxypropionaldehyde (3-HPA) is a toxic intermediary metabolite in the biological route of 1,3-propanediol biosynthesis from glycerol. 3-HPA accumulated in culture medium would arouse an irreversible cessation of the fermentation process. The role of substrate (glycerol) on 3-HPA accumulation in aerobic fermentation was investigated in this paper. 1,3-Propanediol oxidoreductase and glycerol dehydratase, two key enzyme catalyzing reactions of 3-HPA formation and consumption, were sensitive to high concentration of 3-HPA. When the concentration of 3-HPA increased to a higher level in medium (ac 10 mmol/L), the activity of 1,3-propanediol oxidoreductase in cell decreased correspondingly, which led to decrease of the 3-HPA conversion rate, then the 3-HPA concentration increasing was accelerated furthermore. 3-HPA accumulation in culture medium was triggered by this positive feedback mechanism. In the cell exponential growth phase, the reaction catalyzed by 1,3-propanediol oxidoreductase was the rate limiting step in 1,3-propanediol production. The level of 3-HPA in culture medium could be controlled by the substrate (glycerol) concentration, and lower level of glycerol could avoid 3-HPA accumulating to a high, lethal concentration. In fed batch fermentation, under the condition of initial glycerol concentration 30 g/L, and keeping glycerol concentration lower than 7–8 g/L in cell exponential growth phase, 3-HPA accumulation could not be incurred. Based on this result, a glycerol feeding strategy was set up in fed batch fermentation. Under the optimized condition, 50.1 g/L of 1,3-propanediol was produced in 24 h, and 73.1 g/L of final 1,3-propanediol concentration was obtained in 54 h.     

Glycerol fermentation by a new 1,3-propanediol-producing microorganism:Enterobacter agglomerans

 According to their ability to synthesize 1,3-propanediol from glycerol, two species were isolated from the anoxic mud of a distillery waste-water digestor: Clostridium butyricum and Enterobacter agglomerans. The latter, a facultatively anaerobic gram-negative bacterium, is described for the first time as a microorganism producing 1,3-propanediol from glycerol. The products of glycerol conversion by E. agglomerans were identified using nuclear magnetic resonance. A 20-g/l glycerol solution was fermented mainly to 1,3-propanediol (0.51 mol/mol) and acetate (0.18 mol/mol). Ethanol, formate, lactate and succinate were formed as by-products. Gas production was very low; 1,3-propanediol production perfectly balanced the oxido-reduction state of the microorganism. Acetate was the predominant metabolite generating energy for growth. High-glycerol-concentration fermentations (71 g/l and 100 g/l) resulted in an increase of the 1,3-propanediol yield (0.61 mol/mol) at the expense of lactate and ethanol production. Specific rates of glycerol consumption and 1, 3-propanediol and acetate production increased whereas the growth rate decreased. The decrease in ATP yield was linearly correlated with the specific rate of 1,3-propanediol production. Incomplete glycerol consumption (about 40 g/l) was systematically observed when high glycerol concentrations were used. The unbalanced oxido-reduction state, the low carbon recovery and the detection of an unknown compound by HPLC observed in these cases indicate the formation of another metabolite, which is possibly an inhibitory factor. Received: 17 November 1994 / Accepted: 15 December 1994     

Pathway and kinetic analysis of 1,3-propanediol production from glycerol fermentation by Clostridium butyricum

Stoichiometric analysis is applied to continuous glycerol fermentation by Clostridium butyricum to calculate theoretical maximum yields and to predict preferred pathways under different conditions. The upper limits of product concentration and productivity as a function of dilution rate in continuous culture is also predicted from product inhibition kinetic. The theoretical maximum propanediol yield (0.72 mol/mol glycerol) which is calculated for a culture without hydrogen and butyric acid formation agrees well with the experimental maximum value (around 0.71 mol/mol). Comparisons of experimental results (product concentration and productivity) with theoretical calculations and those of the glycerol fermentation by Klebsiella pneumoniae reveal that the production of 1,3-propanediol by C. butyricum is far below the optimum performance available with the present strain. One of the reasons is the relatively high formation of butyric acid under the culture conditions so far applied. The distribution of reducing equivalents to propanediol and hydrogen is also suboptimal. The utilization of the reducing power from pyruvate oxidation for propanediol production is about 60–70% of the theoretical maximum under the present experimental conditions.     

Production of 1,3-propanediol, 2,3-butanediol and ethanol by a newly isolated Klebsiella oxytoca strain growing on biodiesel-derived glycerol based media

The production of 1,3-propanediol, 2,3-butanediol and ethanol was studied, during cultivations of strain Klebsiella oxytoca FMCC-197 on biodiesel-derived glycerol based media. Different kinds of glycerol feedstocks and experimental conditions had an important impact upon the distribution of metabolic products; production of 1,3-propanediol was positively influenced by stable pH conditions and by the absence of N₂ gas infusions throughout the fermentation. Thus, during batch bioreactor fermentations conducted at increasing glycerol concentrations, 1,3-propanediol at 41.3 g/L and yield ～47% (w/w) was achieved at initial glycerol concentration ～120 g/L. At even higher initial glycerol media (150 and 170 g/L), growth was not ceased, but 1,3-propanediol production declined. During fed-batch fermentation under optimal experimental conditions, 126 g/L of glycerol were converted into 50.1 g/L of 1,3-propanediol. In this experiment, also 25.2 g/L of ethanol (conversion yield ～20%, w/w) were formed. A batch-bioreactor culture was performed under non-sterilized conditions and the 1,3-propanediol production was almost equivalent to the sterilized process. Concerning 2,3-butanediol formation, the most detrimental parameter was the absence of N₂ sparging and as a result, no 2,3-butanediol was produced. The presence of glucose as co-substrate seriously enhanced 2,3-butanediol production; when commercial glucose was employed as sole substrate, 32.1 g/L of 2,3-butanediol were formed.     

1,3-Propanediol oxidoreductase production with Klebsiella pneumoniae DSM2026

We report a Klebsiella pneumoniae DSM2026 fermentation procedure for the efficient production of a key enzyme of 1,3-propanediol formation: 1,3-propanediol oxidoreductase (E.C. 1.1.1.202). The fermentation process is composed of an aerobic batch phase on glucose and glycerol and an anaerobic phase on glycerol. The role of the aerobic phase is to produce sufficiently high cell mass (12.9–14.6 g/l dry weight) and to activate the aerobic branch of the Klebsiella glycerol pathway, whereas in the anaerobic phase there is a rapid initiation of 1,3-propanediol oxidoreductase formation. A fast change from an aerobic to an anaerobic environment led to a redox imbalance, which resulted in the abrupt activation of the anaerobic branch of glycerol utilization, with the occurrence of a high 1,3-propanediol-oxidoreductase activity. A mathematical model with substrate inhibition showed that the adequate glycerol concentration for enzyme production was 14–16 g/l. The combination of the optimal substrate concentration together with the subsequent use of glucose and glycerol resulted in 90.6 ± 11.6 U enzyme activity referred to 1 l of fermentation broth and 10.3 ± 0.9 U/(1 h) productivity.     

一步法产1,3-丙二醇酿酒酵母基因工程菌的构建

1,3-丙二醇(1,3-PD)是一种重要的化工原料,发酵法生产1,3-PD是一条新颖且具有潜在竞争力的生产途径。本研究在前期工作的基础上,将分别来源于大肠杆菌和肺炎克雷伯氏菌的基因片段yqhD和dhaB串联表达,构建重组表达载体pYX212-zeocin-pGAP-yqhD-pGAP-dhaB;并得到重组酿酒酵母(Saccharomyces cerevisiae)W303-1A/pYX212-zeocin-pGAP-yqhD-pGAP-dhaB。该重组菌和对照S.cerevisiae分别以葡萄糖为底物摇瓶发酵72h后,重组酿酒酵母发酵液中1,3-PD含量约为1.5g/L;而对照菌株不产1,3-PD。以上结果表明本研究在国内首次成功构建了直接以葡萄糖为底物发酵生产1,3-PD的酿酒酵母基因工程菌。为进一步将dhaB、yqhD基因导入其他以葡萄糖为底物高产甘油的酵母宿主中表达,获得以葡萄糖为底物一步法发酵高产1,3-丙二醇工程菌打下了坚实的基础。     

Inhibition of Clostridium butyricum by 1,3-propanediol and diols during glycerol fermentation

1,3-Propanediol inhibition during glycerol fermentation to 1,3-propanediol by Clostridium butyricum CNCM 1211 has been studied. The initial concentration of the 1,3-propanediol affected the growth of the bacterium more than the glycerol fermentation. μ _max was inversely proportional to the initial concentration of 1,3-propanediol (0–65 g l⁻¹). For glycerol at 20 g l⁻¹, the growth and fermentation were completely stopped at an initial 1,3-propanediol concentration of 65 g l⁻¹. However, for an initial 1,3-propanediol concentration of 50 g l⁻¹ and glycerol at 70 g l⁻¹, the final concentration (initial and produced) of 1,3-propanediol reached 83.7 g l⁻¹(1.1 M), with complete consumption of the glycerol. Therefore, during the fermentation, the strain tolerated a 1,3-propanediol concentration higher than the initial inhibitory concentration (65 g l⁻¹). The addition of 1,2-propanediol or 2,3-butanediol (50 g l⁻¹) in the presence of glycerol (50–100 g l⁻¹), showed that 2-diols reduced the μ _max in a similar way to 1,3-propanediol. The measurement of the osmotic pressure of glycerol solutions, diols and diol/glycerol mixtures did not indicate any differences between these compounds. The hypothesis of diol inhibition was discussed. Taking into account the strain tolerance of highly concentrated 1,3-propanediol during fermentation, the fermentation processes for optimising production were considered. Received: 15 November 1999 / Revision received: 1 February 2000 / Accepted: 4 February 2000     

Improved n-butanol production by a non-acetone producing Clostridium pasteurianum DSMZ 525 in mixed substrate fermentation

The kinetics of growth, acid and solvent production in batch culture of Clostridium pasteurianum DSMZ 525 were examined in mixed or mono-substrate fermentations. In pH-uncontrolled batch cultures, the addition of butyric acid or glucose significantly enhanced n-butanol production and the ratio of butanol/1,3-propanediol. In pH-controlled batch culture at pH?=?6, butyric acid addition had a negative effect on growth and did not lead to a higher n-butanol productivity. On the other hand, mixed substrate fermentation using glucose and glycerol enhanced the growth and acid production significantly. Glucose limitation in the mixed substrate fermentation led to the reduction or inhibition of the glycerol consumption by the growing bacteria. Therefore, for the optimal growth and n-butanol production by C. pasteurianum, a limitation of either substrate should be avoided. Under optimized batch conditions, n-butanol concentration and maximum productivity achieved were 21 g/L, and 0.96 g/L?×?h, respectively. In comparison, mixed substrate fermentation using biomass hydrolysate and glycerol gave a n-butanol concentration of 17 g/L with a maximum productivity of 1.1 g/L?×?h. In terms of productivity and final n-butanol concentration, the results demonstrated that C. pasteurianum DSMZ 525 is well suitable for n-butanol production from mixed substrates of biomass hydrolysate and glycerol and represents an alternative promising production strain.     

Parameters Affecting Solvent Production by Clostridium pasteurianum

The effect of pH, growth rate, phosphate and iron limitation, carbon monoxide, and carbon source on product formation by Clostridium pasteurianum was determined. Under phosphate limitation, glucose was fermented almost exclusively to acetate and butyrate independently of the pH and growth rate. Iron limitation caused lactate production (38 mol/100 mol) from glucose in batch and continuous culture. At 15% (vol/vol) carbon monoxide in the atmosphere, glucose was fermented to ethanol (24 mol/100 mol), lactate (32 mol/100 mol), and butanol (36 mol/100 mol) in addition to the usual products, acetate (38 mol/100 mol) and butyrate (17 mol/100 mol). During glycerol fermentation, a completely different product pattern was found. In continuous culture under phosphate limitation, acetate and butyrate were produced only in trace amounts, whereas ethanol (30 mol/100 mol), butanol (18 mol/100 mol), and 1,3-propanediol (18 mol/100 mol) were the major products. Under iron limitation, the ratio of these products could be changed in favor of 1,3-propanediol (34 mol/100 mol). In addition, lactate was produced in significant amounts (25 mol/100 mol). The tolerance of C. pasteurianum to glycerol was remarkably high; growth was not inhibited by glycerol concentrations up to 17% (wt/vol). Increasing glycerol concentrations favored the production of 1,3-propanediol.     

Improved 1,3-propanediol production with hemicellulosic hydrolysates (corn straw) as cosubstrate: Impact of degradation products on Klebsiella pneumoniae growth and 1,3-propanediol fermentation

To improve 1,3-propanediol (1,3-PD) production by an economic and efficient approach, hemicellulosic hydrolysates (HH) used as cosubstrate resulted in more biomass and higher reducing power for 1,3-PD production. The effects of primary degradation products such as individual sugars (xylose, glucose, mannose, arabinose and galactose) and major inhibitors (furfural, acetate and formate) on the Klebsiella pneumoiae growth and 1,3-PD production were investigated in this study. Xylose and mannose could efficiently promote the 1,3-PD production and cell growth. Furfural (0.28 g/l) and sodium acetate (1.46 g/l) in low concentration were not inhibitory to Klebsiella pneumoniae, rather they have stimulatory effect on the growth and 1,3-PD biosynthesis, especially the acetate. In fed-batch fermentation with HH as cosubstrate, the final 1,3-PD production, conversion from glycerol and productivity were 71.58 g/l, 0.65 mol/mol and 1.93 g/l/h, respectively, which were 17.8%, 25.0% and 17.7% higher than that from glycerol alone.     

Microbial fed-batch production of 1,3-propanediol by Klebsiella pneumoniae under micro-aerobic conditions

The microbial production of 1,3-propanediol (1,3-PD) by Klebsiella pneumoniae under micro-aerobic conditions was investigated in this study. The experimental results of batch fermentation showed that the final concentration and yield of 1,3-PD on glycerol under micro-aerobic conditions approached values achieved under anaerobic conditions. However, less ethanol was produced under microaerobic than anaerobic conditions at the end of fermentation. The batch micro-aerobic fermentation time was markedly shorter than that of anaerobic fermentation. This led to an increment of productivity of 1,3-PD. For instance, the concentration, molar yield, and productivity of 1,3-PD of batch micro-aerobic fermentation by K. pneumoniae DSM 2026 were 17.65 g/l, 56.13%, and 2.94 g l^–1 h^–1, respectively, with a fermentation time of 6 h and an initial glycerol concentration of 40 g/l. Compared with DSM 2026, the microbial growth of K. pneumoniae AS 1.1736 was slow and the concentration of 1,3-PD was low under the same conditions. Furthermore, the microbial growth in fed-batch fermentation by K. pneumoniae DSM 2026 was faster under micro-aerobic than anaerobic conditions. The concentration, molar yield, and productivity of 1,3-PD in fed-batch fermentation under micro-aerobic conditions were 59.50 g/l, 51.75%, and 1.57 g l^–1 h^–1, respectively. The volumetric productivity of 1,3-PD under microaerobic conditions was almost twice that of anaerobic fed-batch fermentation, at 1.57 and 0.80 g l^–1 h^–1, respectively.