Effect of unlabeled helper probes on detection of an RNA target by bead-based sandwich hybridization

Unlabeled helper oligonucleotides assisting a bead-based sandwich hybridization assay were tested for the optimal placement of the capture and detection probes. The target used was a full-length in vitro synthesized mRNA molecule. Helper probes complementary to regions adjacent to the binding site of the 5' end attached capture probe were found much more effective than helper probes targeting positions adjacent to the detection probe binding site. The difference is believed to be caused by a disruption of the RNA secondary structure in the area where the capture probe binds, thereby reducing structural interference from the bead. The use of additional helpers showed an additive effect. Using helpers at both sides of the capture and detection probes showed a 15- to 40-fold increase in hybridization efficiency depending on the target, thereby increasing the sensitivity of the hybridization assays. Using an electrical chip linked to the detection probe for the detection of p-aminophenol, which is produced by alkaline phosphatase, a detection limit of 2 x 10(-13) M mRNA molecules was reached without the use of a nucleic acid amplification step.     

Sensitive genus-specific detection of Legionella by a 16S rRNA based sandwich hybridization assay

The aim of this study was to develop a sensitive, cultivation-independent analytical method for Legionella in man-made water systems which can be performed within one day in crude sample extracts. The new assay for the genus Legionella is a paramagnetic bead based fluorescence sandwich hybridization assay (SHA) for the 16S rRNA based on two oligonucleotide probes which makes the method highly specific. An advantage over RT-PCR is the exclusive detection of viable cells and, due to the high number of 16S RNA molecules, the possibility to apply the method directly in crude cell extracts without prior purification of the nucleic acids. A high sensitivity was obtained by modifying the probe chemistry and hybridization conditions. The most sensitive assay uses a 3'-end biotin-labelled capture probe and a 3'-end DIG tailed detection probe and has a detection limit of 20 amol target molecules corresponding to 1.2x10(7) molecules of 16S rRNA and approximately 1800 Legionella cells. Using this assay type the number of Legionella cells was determined in Legionella contaminated water samples. The results show that the developed SHA can be applied for estimation of the approximate number of Legionella cells based on the number of 16S rRNA molecules in a water sample.     

A sensitive nonisotopic hybridization assay for HIV-1 DNA

We have developed a microtiter-based sandwich hybridization assay for the detection of low copy number HIV-1 sequences. The assay employs a capture DNA sequence covalently coupled to microtiter wells through linker arms. The detection probe is a biotin-labeled DNA fragment derived from sequences adjacent to the capture sequence. After hybridization in the presence of sample nucleic acid, the detection probe remains bound only if the sample contained complementary sequences spanning the junction between capture and detection probes. The amount of detection probe bound is quantified by incubation with a peroxidase-streptavidin conjugate and a colorimetric peroxidase substrate. This assay has been combined with enzymatic target amplification to achieve sensitive detection of HIV-1 in patient samples. Following amplification of HIV-1 DNA using the polymerase chain reaction technique, a 190-bp product is produced. This product is easily and specifically quantified using the sandwich hybridization assay. The resulting test can detect one HIV-1-infected cell in 10(5) cells or about 30 molecules of HIV-1 DNA.     

Nucleic acid hybridization assays employing dA-tailed capture probes. I. Multiple capture methods

A quantitative hybridization assay termed "reversible target capture" is described. The technique is designed to extensively purify the target nucleic acid from crude cell lysates in about 1 h without phenol extraction. Simple, rapid methods are described that explain how each process in the assay is optimized. The procedure involves hybridizing the target nucleic acid in solution with a dA-tailed capture probe and a labeled probe. The capture probe-target-labeled probe "ternary complex" is then captured on magnetic beads containing oligo(dT). After the excess unhybridized labeled probe, cell debris, and other sample impurities are washed away, the intact ternary complex is further purified by chemical elution from the beads and recapture on fresh beads. The ternary complex is then eluted thermally and recaptured on a third set of beads or on poly(dT) filters. This triple capture method results in a detection limit of approximately 0.2 amol (100 fg) of target with 32P-labeled riboprobes. This is approximately 1000 times more sensitive than sandwich assays employing only a single capture step. The method is illustrated by detecting Listeria cells in the presence of heterologous bacteria. With three rounds of target capture, as few as six Listeria cells have been detected in the presence of 1.25 x 10(7) control cells.     

Development of a rapid assay for determining the relative abundance of bacteria

A sandwich hybridization assay for high-throughput, rapid, simple, and inexpensive quantification of specific microbial populations was evaluated. The assay is based on the hybridization of a target rRNA with differentially labeled capture and detector probes. Betaproteobacterial ammonia-oxidizing bacteria (AOB) were selected as the target group for the study, since they represent a phylogenetically coherent group of organisms that perform a well-defined geochemical function in natural and engineered environments. Reagent concentrations, probe combinations, and washing, blocking, and hybridization conditions were optimized to improve signal and reduce background. The detection limits for the optimized RNA assay were equivalent to approximately 10(3) to 10(4) and 10(4) to 10(5) bacterial cells, respectively, for E. coli rRNA and RNA extracted from activated sludge, by using probes targeting the majority of bacteria. Furthermore, the RNA assay had good specificity, permitted discrimination of rRNA sequences that differed by a 2-bp mismatch in the probe target region, and could distinguish the sizes of AOB populations in nitrifying and nonnitrifying wastewater treatment plants.     

Application of a unique server-based oligonucleotide probe selection tool toward a novel biosensor for the detection of Streptococcus pyogenes

We developed a software program for the rapid selection of detection probes to be used in nucleic acid-based assays. In comparison to commercially available software packages, our program allows the addition of oligotags as required by nucleic acid sequence-based amplification (NASBA) as well as automatic BLAST searches for all probe/primer pairs. We then demonstrated the usefulness of the program by designing a novel lateral flow biosensor for Streptococcus pyogenes that does not rely on amplification methods such as the polymerase chain reaction (PCR) or NASBA to obtain low limits of detection, but instead uses multiple reporter and capture probes per target sequence and an instantaneous amplification via dye-encapsulating liposomes. These assays will decrease the detection time to just a 20 min hybridization reaction and avoid costly enzymatic gene amplification reactions. The lateral flow assay was developed quantifying the 16S rRNA from S. pyogenes by designing reporter and capture probes that specifically hybridize with the RNA and form a sandwich. DNA reporter probes were tagged with dye-encapsulating liposomes, biotinylated DNA oligonucleotides were used as capture probes. From the initial number of capture and reporter probes chosen, a combination of two capture and three reporter probes were found to provide optimal signal generation and significant enhancement over single capture/reporter probe combinations. The selectivity of the biosensor was proven by analyzing organisms closely related to S. pyogenes, such as other Streptococcus and Enterococcus species. All probes had been selected by the software program within minutes and no iterative optimization and re-design of the oligonucleotides was required which enabled a very rapid biosensor prototyping. While the sensitivity obtained with the biosensor was only 135 ng, future experiments will decrease this significantly by the addition of more reporter and capture probes for either the same rRNA or a different nucleic acid target molecule. This will lead to the possibility of detecting S. pyogenes with a rugged assay that does not require a cell culturing or gene amplification step and will therefore enable rapid, specific and sensitive onsite testing.     

Microtitre plate hybridization system for detection of thermophilic Campylobacter rRNA

A microtitre plate nucleic acid probe hybridization system was developed for the detection of ribosomal RNA from thermophilic Campylobacter (Camp. jejuni, Camp. coli, Camp. lari and Camp. upsaliensis). A specific DNA probe obtained by amplification of 23S rRNA sequences using the polymerase chain reaction technique was immobilized on a microtitre plate, and used for hybridization with target 23S rRNA from cell lysates. The RNA-DNA hybrids thus formed in the wells were detected by an immunoenzymatic assay using a monoclonal antiRNA-DNA hybrid antibody. The sensitivity of this system was 2.7 x 10(4) cells ml(-1). This simple, sensitive and inexpensive hybridization and immunoenzymatic assay system should facilitate the detection of Campylobacter in food and clinical samples.     

Electrochemical sandwich assay for attomole analysis of DNA and RNA from beer spoilage bacteria Lactobacillus brevis

Attomole (10(-18)mol) levels of RNA and DNA isolated from beer spoilage bacterial cells Lactobacillus brevis have been detected by the electrochemical sandwich DNA hybridization assay exploiting enzymatic activity of lipase. DNA sequences specific exclusively to L. brevis DNA and RNA were selected and used for probe and target DNA design. The assay employs magnetic beads (MB) modified with a capture DNA sequence and a reporter DNA probe labeled with the enzyme, both made to be highly specific for L. brevis DNA. Lipase-labeled DNAs captured on MBs in the sandwich assay were collected on gold electrodes modified with a ferrocene (Fc)-terminated SAM formed by aliphatic esters. Lipase hydrolysis of the ester bond released a fraction of the Fc redox active groups from the electrode surface, decreasing the electrochemical signal from the surface-confined Fc. The assay, shown to be efficient for analysis of short synthetic DNA sequences, was ineffective with genomic double stranded bacterial DNA, but it allowed down to 16 amole detection of 1563 nts long RNA, isolated from bacterial ribosomes without the need for PCR amplification, and single DNA strands produced from ribosomal RNA. No interference from E. coli RNA was registered. The assay allowed analysis of 400 L. brevis cells isolated from 1L of beer, which fits the "alarm signal" range (from 1 to 100 cells per 100mL).     

Development of a Rapid Assay for Determining the Relative Abundance of Bacteria

A sandwich hybridization assay for high-throughput, rapid, simple, and inexpensive quantification of specific microbial populations was evaluated. The assay is based on the hybridization of a target rRNA with differentially labeled capture and detector probes. Betaproteobacterial ammonia-oxidizing bacteria (AOB) were selected as the target group for the study, since they represent a phylogenetically coherent group of organisms that perform a well-defined geochemical function in natural and engineered environments. Reagent concentrations, probe combinations, and washing, blocking, and hybridization conditions were optimized to improve signal and reduce background. The detection limits for the optimized RNA assay were equivalent to approximately 10³ to 10⁴ and 10⁴ to 10⁵ bacterial cells, respectively, for E. coli rRNA and RNA extracted from activated sludge, by using probes targeting the majority of bacteria. Furthermore, the RNA assay had good specificity, permitted discrimination of rRNA sequences that differed by a 2-bp mismatch in the probe target region, and could distinguish the sizes of AOB populations in nitrifying and nonnitrifying wastewater treatment plants.     

Solid-phase time-resolved fluorescence detection of human immunodeficiency virus polymerase chain reaction amplification products.

A new assay system for the detection of polymerase chain reaction (PCR) amplification products is presented. This single-pot sandwich assay system employs solid-support oligonucleotide-coated capture beads, a rare earth metal chelate-labeled probe, and a time-resolved fluorescence detection. The new assay system was evaluated for various reaction conditions including, DNA denaturation time, hybridization salt concentration, probe concentration, and hybridization time, all of which are important in designing an assay with a high level of sensitivity for the detection of duplex DNA. This nonisotopic assay system was applied to the detection of purified human immunodeficiency virus (HIV) DNA and sensitivity was compared with agarose gel electrophoresis and slot blot hybridization using a 32P-labeled probe. We were able to detect the amplified product from one copy of HIV DNA after 35 cycles of PCR amplification in less than 30 min using this assay, which compared with one copy by gel electrophoresis after 40 cycles of PCR amplification and one copy by slot blot hybridization after 35 cycles of PCR amplification and an overnight exposure of the autoradiogram. Thus, this assay is rapid, sensitive, and easy to use.     

Sandwich hybridisation assay for quantitative detection of yeast RNAs in crude cell lysates

Background  

A rapid microtiter plate based sandwich hybridization assay was developed for detection and quantification of single RNA species using magnetic beads. Following solution hybridization target RNA molecules were collected by biotin-streptavidin affinity binding and detected by fluorescence signal generated by alkaline phosphatase. The 18S rRNA and SUC2 mRNA of Saccharomyces cerevisiae were used as model RNA target molecules.     

Enhanced nucleic acid capture and flow cytometry detection with peptide nucleic acid probes and tunable-surface microparticles

New methods for automated, direct nucleic acid purification and detection are required for the next generation of unattended environmental monitoring devices. In this study we investigated whether tunable-surface bead chemistry and peptide nucleic acids (PNA) could enhance the recovery and detection of intact rRNA in both test tube and automated suspension array hybridization formats. Intact rRNA was easily captured and detected on PNA-coated Lumavidin beads from 0.1 ng total RNA with a 15-min hybridization in pH 7 buffer, representing 1.7 x 10(3) cell equivalents of total RNA. DNA-conjugated beads in pH 5 hybridization buffer required an overnight hybridization to achieve a detectable signal at 0.1 ng target RNA. Standard DNA hybridization conditions (pH 7) were one order of magnitude less sensitive than the tunable-surface (pH 5) condition. The PNA-conjugated particles were 100x more sensitive than the tunable-surface DNA particles in the automated format, with a detection limit of 0.1 ng total RNA. The detection limits for total RNA on PNA-conjugated microparticles is immediately conducive to the detection and characterization of microorganisms in low-biomass environments or to the identification of rare sequences in a complex sample mixture, without using PCR.     

In situ DNA amplification with magnetic primers for the electrochemical detection of food pathogens

A sensitive and selective genomagnetic assay for the electrochemical detection of food pathogens based on in situ DNA amplification with magnetic primers has been designed. The performance of the genomagnetic assay was firstly demonstrated for a DNA synthetic target by its double-hybridization with both a digoxigenin probe and a biotinylated capture probe, and further binding to streptavidin-modified magnetic beads. The DNA sandwiched target bound on the magnetic beads is then separated by using a magneto electrode based on graphite-epoxy composite. The electrochemical detection is finally achieved by an enzyme marker, anti-digoxigenin horseradish peroxidase (HRP). The novel strategy was used for the rapid and sensitive detection of polymerase chain reaction (PCR) amplified samples. Promising resultants were also achieved for the DNA amplification directly performed on magnetic beads by using a novel magnetic primer, i.e., the up PCR primer bound to magnetic beads. Moreover, the magneto DNA biosensing assay was able to detect changes at single nucleotide polymorphism (SNP) level, when stringent hybridization conditions were used. The reliability of the assay was tested for Salmonella spp., the most important pathogen affecting food safety.     

Quantification of DNA sequences obtained by polymerase chain reaction using a bioluminescent adsorbent.

We studied various parameters affecting the sensitivity of assays that use nucleic acid hybridization in solution followed by capture of the hybrid on a solid phase. Sensitivity is limited not only by nonspecific binding of the detection components but also by reannealing of the target or probe to itself. To perform sensitive assays, the probe concentration must be low enough to reduce high nonspecific binding. Under these conditions, however, the strand displacement reaction or the reannealing of the target to itself drastically decreases the hybridization yield, particularly when the target and the probes are different sizes. To improve DNA detection, we propose a sandwich method based on hybridization of oligonucleotides with a single-strand DNA obtained by polymerase chain reaction under asymmetric conditions. The assay can be performed in one step using a bioluminescent detection procedure which does not require any separation step. The specificity of the method is sufficient to perform a rapid detection and quantification of papillomavirus in biological samples.     

Disposable polydimethylsiloxane/silicon hybrid chips for protein detection

This paper presents disposable protein analysis chips with single- or four-chamber-constructed from poly(dimethylsiloxane) (PDMS) and silicon. The chips are composed of a multilayer stack of PDMS layers that sandwich a silicon microchip. This inner silicon chip features an etched array of micro-cavities hosting polymeric beads. The sample is introduced into the fluid network through the top PDMS layer, where it is directed to the bead chamber. After reaction of the analyte with the probe beads, the signal generated on the beads is captured with a CCD camera, digitally processed, and analyzed. An established bead-based fluorescent assay for C-reactive protein (CRP) was used here to characterize these hybrid chips. The detection limit of the single-chamber protein chip was found to be 1 ng/ml. Additionally, using a back pressure compensation method, the signals from each chamber of the four-chamber chip were found to fall within 10% of each other.     

Colorimetric detection of the toxic dinoflagellate Alexandrium minutum using sandwich hybridization in a microtiter plate assay

Rapid and reliable detection of harmful algae in coastal areas and shellfish farms is an important requirement for monitoring programs. Molecular technologies are rapidly improving the detection of phytoplankton and their toxins. Assays are based on the discrimination of genetic differences in the species. A commercially available PCR ELISA Dig Detection Kit in a microtiter plate was adapted for the rapid assessment of specificity of the two probes used in a sandwich hybridization assay. The toxic dinoflagellate Alexandrium minutum was used as the target organism and a capture and signal probe were designed for a species-specific identification of this species. This assay also provided the necessary specificity tests prior to the probes being adapted to an automated biosensor using a sandwich hybridization format. All probes regardless of the detection method must be extensively tested prior to use in the field. Total rRNA was isolated from three different strains of A. minutum and the mean concentration of RNA per cell of was determined to be 0.028 ng ± 0.003. Thus, a standard calibration curve for different RNA concentrations was determined so that cell numbers could be inferred from the assay. The assay and the standard curve were evaluated by using spiked field samples. The results demonstrated that the molecular assay was able to detect A. minutum cells at different cell counts in the presence of a complex background.     

Affinity purification of DNA and RNA from environmental samples with peptide nucleic acid clamps

Bispeptide nucleic acids (bis-PNAs; PNA clamps), PNA oligomers, and DNA oligonucleotides were evaluated as affinity purification reagents for subfemtomolar 16S ribosomal DNA (rDNA) and rRNA targets in soil, sediment, and industrial air filter nucleic acid extracts. Under low-salt hybridization conditions (10 mM NaPO(4), 5 mM disodium EDTA, and 0.025% sodium dodecyl sulfate [SDS]) a PNA clamp recovered significantly more target DNA than either PNA or DNA oligomers. The efficacy of PNA clamps and oligomers was generally enhanced in the presence of excess nontarget DNA and in a low-salt extraction-hybridization buffer. Under high-salt conditions (200 mM NaPO(4), 100 mM disodium EDTA, and 0.5% SDS), however, capture efficiencies with the DNA oligomer were significantly greater than with the PNA clamp and PNA oligomer. Recovery and detection efficiencies for target DNA concentrations of > or =100 pg were generally >20% but depended upon the specific probe, solution background, and salt condition. The DNA probe had a lower absolute detection limit of 100 fg of target (830 zM [1 zM = 10(-21) M]) in high-salt buffer. In the absence of exogenous DNA (e.g., soil background), neither the bis-PNA nor the PNA oligomer achieved the same absolute detection limit even under a more favorable low-salt hybridization condition. In the presence of a soil background, however, both PNA probes provided more sensitive absolute purification and detection (830 zM) than the DNA oligomer. In varied environmental samples, the rank order for capture probe performance in high-salt buffer was DNA > PNA > clamp. Recovery of 16S rRNA from environmental samples mirrored quantitative results for DNA target recovery, with the DNA oligomer generating more positive results than either the bis-PNA or PNA oligomer, but PNA probes provided a greater incidence of detection from environmental samples that also contained a higher concentration of nontarget DNA and RNA. Significant interactions between probe type and environmental sample indicate that the most efficacious capture system depends upon the particular sample type (and background nucleic acid concentration), target (DNA or RNA), and detection objective.     

A ribosomal DNA fragment of Listeria monocytogenes and its use as a genus-specific probe in an aqueous-phase hybridization assay.

cDNAs were prepared from the total RNA of Listeria monocytogenes ATCC 19118 and used as probes to screen a genomic library of the same strain. Four clones were identified which contained ribosomal DNA fragments. Recombinant DNA from one of them was fractionated and differentially hybridized with the cDNA probes to RNA of L. monocytogenes and Kurthia zopfii. The resulting hybridization pattern revealed an HpaII fragment of 0.8 kb that was specific for the L. monocytogenes strain. The nucleotide sequence of this fragment showed 159 bases of the 3' end of the 16S rRNA gene, 243 bases of the spacer region, and 382 bases of the 5' end of the 23S rRNA gene. In dot blot hybridization assays, the 32P-labeled 784-bp fragment was specific only for Listeria species. Dot blot assays revealed that the 32P-labeled fragment can easily detect > or = 10 pg of total nucleic acids from pure cultures of L. monocytogenes, which corresponds to approximately 300 bacteria. This fragment was also used as a probe in an assay named the heteroduplex nucleic acid (HNA) enzyme-linked immunosorbent assay. In this system, the biotinylated DNA probe is hybridized in the aqueous phase with target RNA molecules and then specific HNAs are captured by HNA-specific antibodies. Captured HNA molecules are revealed with an enzyme conjugate of streptavidin. In a preliminary HNA enzyme-linked immunosorbent assay, the 784-bp fragment maintained its specificity for Listeria spp. and could detect 5 x 10(2) cells in artificially contaminated meat homogenate.     

A noise-free molecular hybridization procedure for measuring RNA in cell lysates

A solution hybridization technique was designed to measure RNA abundance in crude cell lysates and at the same time to maximize confidence that signals resulted from true molecular hybridization. Cell lysates were prepared in 5 M guanidine thiocyanate, then RNA molecules in the lysates were hybridized with two probes, a 32P-labeled RNA "label probe" which provided signal and an oligodeoxyribonucleotide "capture probe" containing a poly(dA) tail which provided a mechanism for selective purification. Ternary hybrids were "captured" on oligo(dT)-coated superparamagnetic beads through a readily reversible interaction with the poly(dA) of the capture probe. RNA did not bind to dT beads through poly(A) under the capture conditions used. Hybrids were purified through cycles of capture on and release from dT beads, with each cycle yielding a 100- to 1000-fold reduction in noise (unhybridized label probe) and a 50-90% recovery of signal (hybridized label probe). Noise was driven below detectable limits after three cycles of capture, thereby improving the sensitivity of measuring target RNA. As few as 15,000 target molecules, 15 fg of a 3-kb RNA, was detectable in the equivalent of 2 x 10(6) cells in concentrated cell lysates (10(8) cells/ml). Since hybridization with both probes was required in order to yield a signal, hybridization specificity could be adjusted with either or both probes. The greater specificity and lack of noise increased confidence that the signal was proportional to the amount of RNA of interest.