Production and properties of xylanases from Aspergillus terricola Marchal and Aspergillus ochraceus and their use in cellulose pulp bleaching

Aspergillus terricola and Aspergillus ochraceus, isolated from Brazilian soil, were cultivated in Vogel and Adams media supplemented with 20 different carbon sources, at 30 °C, under static conditions, for 120 and 144 h, respectively. High levels of cellulase-free xylanase were produced in birchwood or oat spelt xylan-media. Wheat bran was the most favorable agricultural residue for xylanase production. Maximum activity was obtained at 60 °C and pH 6.5 for A. terricola, and 65 °C and pH 5.0 for A. ochraceus. A. terricola xylanase was stable for 1 h at 60 °C and retained 50% activity after 80 min, while A. ochraceus xylanase presented a t ₅₀ of 10 min. The xylanases were stable in an alkali pH range. Biobleaching of 10 U/g dry cellulose pulp resulted in 14.3% delignification (A. terricola) and 36.4% (A. ochraceus). The brightness was 2.4–3.4% ISO higher than the control. Analysis in SEM showed defibrillation of the microfibrils. Arabinase traces and β-xylosidase were detected which might act synergistically with xylanase.     

Production and optimization of cellulase-free, alkali-stable xylanase by Bacillus pumilus SV-85S in submerged fermentation

This paper reports the production of a cellulase-free and alkali-stable xylanase in high titre from a newly isolated Bacillus pumilus SV-85S using cheap and easily available agro-residue wheat bran. Optimization of fermentation conditions enhanced the enzyme production to 2995.20 ± 200.00 IU/ml, which was 9.91-fold higher than the activity under unoptimized basal medium (302.2 IU/ml). Statistical optimization using response-surface methodology was employed to obtain a cumulative effect of peptone, yeast extract, and potassium nitrate (KNO₃) on enzyme production. A 2³ central composite design best optimized the nitrogen source at the 0 level for peptone and yeast extract and at the −α level for KNO₃, along with 5.38-fold increase in xylanase activity. Addition of 0.1% tween 80 to the medium increased production by 1.5-fold. Optimum pH for xylanase was 6.0. The enzyme was 100% stable over the pH range from 5 to 11 for 1 h at 37°C and it lost no activity, even after 3 h of incubation at pH 7, 8, and 9. Optimum temperature for the enzyme was 50°C, but the enzyme displayed 78% residual activity even at 65°C. The enzyme retained 50% activity after an incubation of 1 h at 60°C. Characteristics of B. pumilus SV-85S xylanase, including its cellulase-free nature, stability in alkali over a long duration, along with high-level production, are particularly suited to the paper and pulp industry.     

Selective recovery of xylanase from Penicillium janthinellum using BDBAC reversed micelles

A xylanase was removed from crude extract of the fungus Penicillium janthinellum under optimized conditions: 0.10M phosphate buffer, pH 7.0, 0.2 M BDBAC (N-benzyl-N-dodeceyl-N-bis (2-hydroxyethyl) ammonium chloride), 7.5% hexanole, 30°C and an agitation time of 1 minute. At 1.42 mg per ml protein concentration, 73% of the xylanase activity was recovered and a 7-fold enrichment factor was obtained. The enzyme had a molecular weight (MW) of 20.1 kDa and the isoelectric point (PI) revealed the presence of two protein bands with a PI of 6.0 and 6.5. The optimum pH and optimum temperature were 4.2 and 50°C, respectively. The low pH differential between the aqueous medium and the protein PI seemed to influence the xylanase transportation into the reversed micelles.     

Alkaline xylanases from Bacillus mojavensis A21: Production and generation of xylooligosaccharides

Medium composition and culture conditions for the xylanases production by Bacillus mojavensis A21 were optimized using two statistical methods: Plackett-Burman design applied to find the key ingredients and conditions for the best yield of enzyme production and Box-Behnken design used to optimize the value of the four significant variables: barley bran, NaCl, agitation, and cultivation time. The optimal conditions for higher production of xylanases were barley bran 18.66g/l, NaCl 1.04g/l, speed of agitation 176rpm and cultivation time 34.08h. Under these conditions, the xylanase experimental yield (7.45U/ml) closely matched the yield predicted by the statistical model (7.23U/ml) with R(2)=0.98. The medium optimization resulted in a 6.83-fold increase in xylanase production compared to that of the initial medium. Best xylanase activity was observed at the temperature of 50°C and at pH 8.0. The enzyme retained more 96% of its activity after 24h at pH ranges from 7.0 to 90.0. The enzyme preserved more 80% of its initial activity after 60min of pre-incubation from 30°C to 60°C. The main hydrolysis products yielded from corncob extracted xylan were xylobiose and xylotriose, suggesting the good potential of strain A21 in xylooligosaccharides production.     

Production of alkaliphilic, halotolerent, thermostable cellulase free xylanase by Bacillus halodurans PPKS-2 using agro waste: single step purification and characterization

The alkaliphilic Bacillus halodurans strain PPKS-2 was shown to produce extracellular alkaliphilic, thermostable and halotolerent xylanase. The culture conditions for xylanase production were optimized with respect to pH, temperature, NaCl and inexpensive agro waste as substrates. Xylanase yield was enhanced more than four fold in the presence of 1% corn husk and 0.5% peptone or feather hydrolysate at pH 11 and 37°C. Xylanase was purified to 11.8-fold with 8.7% yield by using traditional chromatographic methods whereas the same enzyme purified to 20-fold with 72% yield by using corn husk as ligand. Its molecular mass was estimated to be 24 kDa by SDS–PAGE. The xylanase had maximal activity at pH 11 and 70°C. The enzyme was active over broad range, 0–20% sodium chloride. The enzyme was thermostable retaining 100% of the original activity at 70°C for 3 h. The apparent K _m values for oat spelt xylan and brichwood xylan were 4.1 and 4.4 mg/ml respectively. The deduced internal amino acid sequence of PPKS-2 xylanase resembled the sequence of β-1,4-endoxylanase, which is member of glycoside hydrolase family 11.     

Xylanase production using inexpensive agricultural wastes and its partial characterization from a halophilic <Emphasis Type="Italic">Chromohalobacter</Emphasis> sp. TPSV 101

A halophilic and alkali-tolerant Chromohalobacter sp. TPSV 101 with an ability to produce extracellular halophilic, alkali-tolerant and moderately thermostable xylanase was isolated from solar salterns. Identification of the bacterium was done based upon biochemical tests and 16S rRNA sequence. The culture conditions for higher xylanase production were optimized with respect to NaCl, pH, temperature, substrates and metal ions and additives. Maximum xylanase production was achieved in the medium with 20% NaCl, pH-9.0 at 40°C supplemented with 1% (w/v) sugarcane bagasse and 0.5% feather hydrolysate as carbon and nitrogen sources. Sugarcane bagasse (250 U/ml) and wheat bran (190 U/ml) were the best inducer of xylanase when used as carbon source as compared to xylan (61 U/ml). The xylanase that was partially purified by protein concentrator had a molecular mass of 15 kDa approximately. The xylanase from Chromohalobacter sp. TPSV 101 was active at pH 9.0 and required 20% NaCl for optimal xylanolytic activity and was active over a broad range of temperature 40–80°C with 65°C as optimum. The early stage hydrolysis products of sugarcane bagasse were xylose and xylobiose, after longer periods of incubation only xylose was detected.     

Alkali-thermostable and cellulase-free xylanase production by an extreme thermophile <Emphasis Type="Italic">Geobacillus thermoleovorans</Emphasis>

The optimization of cultural variables resulted in a marked enhancement in the secretion of cellulase-free and alkali-thermostable xylanase (EC 3.2.1.8) by an extreme thermophile Geobacillus thermoleovorans. The enzyme secretion was enhanced when the medium was supplemented with xylan (0.15%) and Tween-80 (0.1% v/v). In wheat bran-tryptone medium, the peak in enzyme production was attained within 42 h in a fermenter as compared to 72 h in shake flasks. Optimization of the culture conditions resulted in a 7.72-fold enhancement in enzyme production. The cellulase-free xylanase was optimally active at pH 8.5 and 80°C, and it was found to be useful in the pre-bleaching process of paper pulps.     

Cloning of a xylanase gene <Emphasis Type="Italic">xyn2A</Emphasis> from rumen fungus <Emphasis Type="Italic">Neocallimastix</Emphasis> sp. GMLF2 in <Emphasis Type="Italic">Escherichia coli</Emphasis> and its partial characterization

Anaerobic fungi belonging to the family Neocallimastigaceae are native inhabitants in the rumen of the most herbivores, such as cattle, sheep and goats. A member of this unique group, Neocallimastix sp. GMLF2 was isolated from cattle feces and screened for its xylanase encoding gene using polymerase chain reaction. The gene coding for a xylanase (xyn2A) was cloned in Escherichia coli and expression was monitored. To determine the enzyme activity, assays were conducted for both fungal xylanase and cloned xylanase (Xyl2A) for supernatant and cell-associated activities. Optimum pH and temperature of the enzyme were found to be 6.5 and 50°C, respectively. The enzyme was stable at 40°C and 50°C for 20 min but lost most of its activity when temperature reached 60°C for 5-min incubation time. Rumen fungal xylanase was mainly released to the supernatant of culture, while cloned xylanase activity was found as cell-associated. Multiple alignment of the amino acid sequences of Xyl2A with published xylanases from various organisms suggested that Xyl2A belongs to glycoside hydrolase family 11.     

A novel cold-active xylanase from the cellulolytic myxobacterium Sorangium cellulosum So9733-1: gene cloning, expression, and enzymatic characterization

The cellulolytic myxobacterium Sorangium cellulosum is able to efficiently degrade many kinds of polysaccharides, but none of the enzymes involved have been characterized. In this paper, a xylanase gene (xynA) was cloned from S. cellulosum So9733-1 using thermal asymmetric interlaced PCR. The gene is composed of 1,209 bp and has only 52.27% G + C content, which is much lower than that of most myxobacterial DNA reported (67–72%). Gene xynA encodes a 402 amino acid protein that contains a single catalytic domain belonging to the glycoside hydrolase family 10. The novel xylanase gene, xynA, was expressed in Escherichia coli BL21 (DE3) and the recombinant protein (r-XynA) was purified by Ni-affinity chromatography. The r-XynA had the optimum temperature of 30–35°C and exhibited 33.3% activity at 5°C and 13.7% activity at 0°C. Approximately 80% activity was lost after 20-min pre-incubation at 50°C. These results indicate that r-XynA is a cold-active xylanase with low thermostability. At 30°C, the K _m values of r-XynA on beechwood xylan, birchwood xylan, and oat spelt xylan were 25.77 ± 4.16, 26.52 ± 4.78, and 38.13 ± 5.35 mg/mL, respectively. The purified r-XynA displayed optimum activity at pH 7.0. The activity of r-XynA was enhanced by the presence of Ca²⁺. The r-XynA hydrolyzed beechwood xylan, birchwood xylan, and xylooligosaccharides (xylotriose, xylotetraose, and xylopentose) to produce primarily xylose and xylobiose. To our knowledge, this is the first report on the characterization of a xylanase from S. cellulosum.     

Fermentation of cellulosic hydrolysates obtained by enzymatic saccharification of sugarcane bagasse pretreated by hydrothermal processing

This work aims to evaluate the fermentability of cellulosic hydrolysates obtained by enzymatic saccharification of sugarcane bagasse pretreated by hydrothermal processing using Candida guilliermondii FTI 20037 yeast. The inoculum was obtained from yeast culture in a medium containing glucose as a carbon source supplemented with rice bran extract, CaCl₂·2H₂O and (NH₄)₂SO₄ in 50 mL Erlenmeyer flasks, containing 20 mL of medium, initial 5.5 pH under agitation of an orbital shaker (200 rpm) at 30°C for 24 h. The cellulosic hydrolysates, prior to being used as a fermentation medium, were autoclaved for 15 min at 0.5 atm and supplemented with the same nutrients employed for the inoculum, except the glucose, using the same conditions for the inoculum, but with a period of 48 h. Preliminary results showed the highest consumption of glucose (97%) for all the hydrolysates, at 28 h of fermentation. The highest concentration of ethanol (20.5 g/L) was found in the procedure of sugarcane bagasse pretreated by hydrothermal processing (195°C/10 min in 20 L reactor) and delignificated with NaOH 1.0% (w/v), 100°C, 1 h in 500 mL stainless steel ampoules immersed in an oil bath.     

Production,purification and characterisation of a novel halostable xylanase from Bacillus sp. NTU-06

Bacillus sp. NTU-06 was used to produce xylanase, which is an important industrial enzyme used in the pulp and paper industry. The enzyme was purified by fast protein liquid chromatography (FPLC) and had a molecular mass of 24 kDa. The enzyme was active over a concentration range of 0–20% sodium chloride in culture broth, although its activity was optimal in 5% sodium chloride. A salinity stability test showed that 43% of the enzyme activity was retained after 4 h in 20% sodium chloride. Xylanase activity was maximal at pH 8.0 and 40°C. The enzyme was somewhat thermostable, retaining 20% of the original activity after incubation at 70°C for 4 h. The xylanase had K_m and V_max values of 3.45 mg mL⁻¹ and 387.3 µmol min⁻¹mg⁻¹, respectively. The deduced internal amino acid sequence of Bacillus sp. NTU-06 xylanase resembled the sequence of beta-1,4-endoxylanase, which is a member of glycoside hydrolase family 11. Some of the novel characteristics that make this enzyme potentially effective in xylan biodegradation are discussed.     

Conditions for Maximum Enflagellation in Naegleria fowleri1

ABSTRACT. Ameba to flagellate transformation in Naegleria fowleri (Lovell strain) was affected by growth temperature, phase of growth, strain of ameba, culture agitation, enflagellation temperature, enflagellation diluent, and cell concentration. Amebae transformed best when they were grown without agitation and enflagellated with agitation. Regardless of growth temperature (23°, 30°, 37°, and 42°C were tested), amebae transformed best at 37°C. Enflagellation was greatest for cells harvested between 24 h (mid-exponential) and 84 h (late stationary) of growth.     

Thermostable, alkalophilic and cellulase free xylanase production by Thermoactinomyces thalophilus subgroup C

Thermoactinomyces thalophilus produced cellulase free extracellular endo-1,4-beta-xylanase (EC 3.2.1.8) at 50 degrees C and pH 8.5. Maximum xylanase production was achieved in fermentation medium using birchwood xylan as substrate after 96 h of growth at 50 degrees C. Other agricultural substrates such as wheat bran, wheat straw, sugarcane bagasse and cornstover produced less xylanase. The crude enzyme preparation from mutant T. thalophilus P2 grown under optimised fermentation conditions showed no cellulase contamination and maximum xylanase activity of 42 U/ml at 65%deg;C and pH 8.5-9.0. This enzyme with initial xylanase activity of 42 U/ml was found thermostable up to 65 degrees C and retaining 50% of its activity after its incubation for 125 min at 65 degrees C.     

Statistical screening and optimization of process variables for xylanase production utilizing alkali-pretreated rice husk

With the objective of the production of xylanase, local raw material (rice husk) and the indigenous isolate, Aspergillus niger ITCC 7678, were studied. Optimization of the cultivation system for enhancing xylanase production was studied via submerged fermentation. Statistical procedures were employed to study the effect of process variables, such as alkali-pretreated rice husk (as carbon source), NaNO₃ (as nitrogen source), KH₂PO₄, KCl, Tween 80 (as surfactant), MgSO₄, FeSO₄·7H₂O, pH, particle size, agitation, and temperature, on xylanase production by A. niger. The effect and significance of the variables was studied using Plackett–Burman (PBD) and central composite statistical design (CCD). It was found that alkali pretreated rice husk (weight/volume), pH, temperature, and NaNO₃ significantly influence xylanase production. So, these four factors were further optimized by CCD, and it was found that maximum xylanase activity of 10.9 IU/ml was observed at (6.5 % w/v) rice husk, pH (5.5), temperature (32.5 °C), and NaNO₃ (0.35 % w/v) concentration. Under optimum conditions, xylanase production was also studied at the bioreactor level and showed 12.8 % enhanced xylanase activity.     

Xylanases from <Emphasis Type="Italic">Aspergillus niger,Aspergillus niveus</Emphasis> and <Emphasis Type="Italic">Aspergillus ochraceus</Emphasis> produced under solid-state fermentation and their application in cellulose pulp bleaching

This study describes the production of xylanases from Aspergillus niveus, A. niger, and A. ochraceus under solid-state fermentation using agro-industrial residues as substrates. Enzyme production was improved using a mixture of wheat bran and yeast extract or peptone. When a mixture of corncob and wheat bran was used, xylanase production from A. niger and A. ochraceus increased by 18%. All cultures were incubated at 30 °C at 70–80% relative humidity for 96 h. For biobleaching assays, 10 or 35 U of xylanase/g dry cellulose pulp were incubated at pH 5.5 for 1 or 2 h, at 55 °C. The delignification efficiency was 20%, the brightness (percentage of ISO) increased two to three points and the viscosity was maintained confirming the absence of cellulolytic activity. These results indicated that the use of xylanases could help to reduce the amount of chlorine compounds used in cellulose pulp treatment.     

De novo synthesis,constitutive expression of <Emphasis Type="Italic">Aspergillus sulphureus</Emphasis> β-xylanase gene in <Emphasis Type="Italic">Pichia pastoris</Emphasis> and partial enzymic characterization

The endo-β-1, 4-xylanase gene xynA from Aspergillus sulphureus, encoded a lack-of-signal peptide protein of 184 amino acids, was de novo synthesized by splicing overlap extension polymerase chain reaction according to Pichia pastoris protein’s codon bias. The synthetic DNA, composed of 572 nucleotides, was ligated into the downstream sequence of an α-mating factor in a constitutive expression vector pGAPzαA and electrotransformed into the P. pastoris X-33 strain. The transformed yeast screened by Zeocin was able to constitutively secrete the xylanase in yeast–peptone–dextrose liquid medium. The heterogenous DNA was stabilized in the strain by 20-times passage culture. The recombinant enzyme was expressed with a yield of 120 units/mL under the flask culture at 28°C for 3 days. The enzyme showed optimal activity at 50°C and pH 2.4–3.4. Residual activity of the raw recombinant xylanase was not less than 70% when fermentation broth was directly heated at 80°C for 30 min. However, the dialyzed xylanase supernatant completely lost the catalytic activity after being heated at 60°C for 30 min. The recombinant xylanase showed no obvious activity alteration by being pretreated with Na₂HPO₄-citric acid buffer of pH 2.4 for 2 h. The xylanase also showed resistance to certain metal ions (Na⁺, Mg²⁺, Ca²⁺, K⁺, Ba²⁺, Zn²⁺, Fe²⁺, and Mn²⁺) and EDTA. These biochemical characteristics suggest that the recombinant xylanase has a prospective application in feed industry as an additive.     

Production and characterization of thermostable xylanase and pectinase from Streptomyces sp. QG-11-3

Streptomyces sp. QG-11-3, which produces a cellulase-free thermostable xylanase (96 IU ml⁻¹) and a pectinase (46 IU ml⁻¹), was isolated on Horikoshi medium supplemented with 1% w/v wheat bran. Carbon sources that favored xylanase production were rice bran (82 IU ml⁻¹) and birch-wood xylan (81 IU ml⁻¹); pectinase production was also stimulated by pectin and cotton seed cake (34 IU ml⁻¹ each). The partially purified xylanase and pectinase were optimally active at 60°C. Both enzymes were 100% stable at 50°C for more than 24 h. The half-lives of xylanase and pectinase at 70, 75 and 80°C were 90, 75 and 9 min, and 90, 53 and 7 min, respectively. The optimum pH values for xylanase and pectinase were 8.6 and 3.0, respectively, at 60°C. Xylanase and pectinase were stable over a broad pH range between 5.4 and 9.4 and 2.0 to 9.0, respectively, retaining more than 85% of their activity. Ca²⁺ stimulated the activity of both enzymes up to 7%, whereas Cd²⁺, Co²⁺, Cr³⁺, iodoacetic acid and iodoacetamide inhibited xylanase up to 35% and pectinase up to 63%; at 1 mM, Hg²⁺ inhibited both enzymes completely. Journal of Industrial Microbiology & Biotechnology (2000) 24, 396–402. Received 29 September 1999/ Accepted in revised form 02 February 2000     

Development of mutants of <Emphasis Type="Italic">Melanocarpus albomyces</Emphasis> for hyperproduction of xylanase

The wild type filamentous fungus, Melanocarpus albomyces, produces many commercially valuable enzymes, including Xylanases and Xylan-debranching enzymes with low activity. In this paper, we report for the first time the development of M. albomyces mutants from vegetative spores. Profuse sporulation of M. albomyces was induced on Potato Carrot Agar medium. These spores, when subjected to chemical mutation, led to the isolation of the hyper-xylanase producing mutant, viz, M. albomyces IITD3A. Various parameters including number of spores, nitrogen source and C/N ratio of the medium were optimized for production of xylanase by the mutant in a shake flask culture. Under controlled pH at 7.8, the mutant produced highly active xylanase with 415 IU/mL after 36 h of growth on soluble alkaline lignocellulosic extract in a 14-L fermentor. The overall productivity of xylanase was 8-fold higher than the wild type culture with11, 530 IU/L/h. The enzyme can be easily stored at 37°C for 50 days by addition of a small amount of the preservative — thiomersal. Also, for long term storage, a lyophilized powder form of the enzyme can be used which retained 100% of its activity for > 50 days. When assayed at pH 7.5 and temperature 55°C, the xylanase retained 100% of its original activity, and also at pH 9.0, it retained > 50% of its activity for 2 h, which is promising for its application in the pulp and paper industry.     

Purification of the alkaliphilic xylanases from Myceliophthora sp. IMI 387099 using cellulose-binding domain as an affinity tag

Ten xylanase isoforms produced by Myceliophthora sp. were characterized for their ability to bind to avicel. Three of the xylanases showing differential affinity for avicel were purified by column chromatography. The purified xylanase Xyl IIa, IIb and IIc showed molecular mass of 47, 41 and 30 kDa and pI of ∼3.5, 4.8 and 5.2, respectively. Xyl IIa was optimally active at pH 8.0 and temperature 70 °C, while Xyl IIb and IIc were optimally active at pH 9.0 and 60 °C and 7.0 and 80 °C, respectively. Xyl IIa and Xyl IIb showed higher stability under alkaline conditions (pH 9.0) and retained 80% of the original activity upto 1 h and 3 h respectively, at 50 °C. All three purified iso-xylanases showed enhanced activities in presence of Na⁺, Mg²⁺, Mn²⁺ and K⁺ ions, whereas, Zn²⁺ and Cu²⁺ showed negative effect on Xyl IIa. The activity of Xyl IIa increased in presence of reducing agents DTT and mercaptoethanol, however, SDS showed inhibitory effect. Kinetic studies showed that Xyl IIb and IIc degrade rye arabinoxylan, much more efficiently than oat spelt xylan, whereas, Xyl IIa showed much higher Kcat/Km value for birch wood xylan as compared to oat spelt xylan. The purified xylanases were apparently classified in family 10.     

A new xylanase from thermoacidophilic Alicyclobacillus sp. A4 with broad-range pH activity and pH stability

We have identified a highly pH-adaptable and stable xylanase (XynA4) from the thermoacidophilic Alicyclobacillus sp. A4, a strain that was isolated from a hot spring in Yunnan Province, China. The gene (xynA4) that encodes this xylanase was cloned, sequenced, and expressed in Escherichia coli. It encodes a 338-residue polypeptide with a calculated molecular mass of 42.5 kDa. The deduced amino acid sequence is most similar to (53% identity) an endo-1,4-β-xylanase from Geobacillus stearothermophilus that belongs to family 10 of the glycoside hydrolases. Purified recombinant XynA4 exhibited maximum activity at 55°C and pH 7.0, had broad pH adaptability (>40% activity at pH 3.8–9.4) and stability (retaining >80% activity after incubation at pH 2.6–12.0 for 1 h at 37°C), and was highly thermostable (retaining >90% activity after incubation at 60°C for 1 h at pH 7.0). These properties make XynA4 promising for application in the paper industry. This is the first report that describes cloning and expression of a xylanase gene from the genus Alicyclobacillus.