Conversion of benzylpenicillin to 6-aminopenicillanic acid in a batch reactor and continuous feed stirred tank reactor using immobilized penicillin amidase

A rate equation has been derived to describe the hydrolysis of benzylpenicillin to 6-aminopenicillanic acid by penicillin amidase. The integrated from of the rate equation has been shown to predict satisfactorily the progress of the reaction in a batch reactor using either soluble or immobilized penicillin amidase. The rate equation was also used to predict the performance of a continuous feed stirred tank reactor containing immobilized enzyme. There was good agreement with experimental measurements.     

A comparison of three different mammalian cell bioreactors for the production of monoclonal antibodies

Three different commercially available stirred tank reactors for mammalian cell culturing were compared for the ability to support hybridoma cell growth and monoclonal antibody production in batch mode operation. Despite quite similar vessel geometries differences were found both in growth and production profiles in the systems. These differences can possibly be related to the different aeration modes used in the bioreactors, and the levels of shear stress created by stirrer and agitator in the tanks.     

Production of optically pure L-alanine in batch and continuous stirred tank reactors using immobilized Pseudomonas sp.

A process to obtain optically pure l-alanine has been developed using batch and continuous stirred tank reactors with a new l-aminoacylase-producing bacterium Pseudomonas sp. BA2 immobilized in calcium alginate beads coated with glutaraldehyde. The maximum production of l-alanine in a continuous stirred tank reactor was 11.26 g after 2 days of operation which is higher than that previously reported.     

Thermostable lipolytic enzymes production in batch and continuous cultures of Thermus thermophilus HB27

Several studies in laboratory-scale bioreactors are undertaken in order to verify the beneficial effect of thermal spring water in the culture medium of Thermus thermophilus HB27. Two bioreactor configurations, stirred tank and airlift, are investigated to determine the most suitable one to develop a continuous process. Water mineral composition affects the lipolytic enzyme secretion and growth of T. thermophilus HB27 in both bioreactor configurations. Furthermore, the lipolytic activity is strongly enhanced when stirred tank bioreactor is used. Moreover, operation in a stirred tank at an agitation rate of 650 rpm leads to the highest total lipolytic activity (intra- and extracellular enzyme) around 280 U/L after 32 h. Continuous cultures operating in the optimised conditions determined in batch cultures are carried out. It is noticeable that the stirred tank bioreactor was able to operate in a continuous flow mode without operational problems. In addition, the lipolytic activity obtained is about 2-fold higher than that attained in batch cultures.     

Continuous alpha-amylase production using Bacillus amyloliquefaciens adsorbed on an ion exchange resin

Summary A method for the continuous production of extracellular alpha amylase by surface immobilized cells of Bacillus amyloliquefaciens NRC 2147 has been developed. A large-pore, macroreticular anionic exchange resin was capable of initially immobilizing an effective cell concentration of 17.5 g DW/1 (based on a total reactor volume of 160 ml). The reactor was operated continuously with a nutrient medium containing 15 g/l soluble starch, as well as yeast extract and salts. Aeration was achieved by sparging oxygen enriched air into the column inlet. Fermentor plugging by cells was avoided by periodically substituting the nutrient medium with medium lacking in both soluble starch and yeast extract. This fermentor was operated for over 200 h and obtained a steady state enzyme concentration of 18700 amylase activity units per litre (18.7 kU/l), and an enzyme volumetric productivity of 9700 amylase activity units per litre per hour (9.7 kU/l-h). Parallel fermentations were performed using a 2 l stirred vessel fermentor capable of operation in batch and continuous mode. All fermentation conditions employed were identical to those of the immobilized cell experiments in order to assess the performance of the immobilized cell reactor. Batch stirred tank operation yielded a maximum amylase activity of 150 kU/l and a volumetric productivity of 2.45 kU/l-h. The maximum cell concentration obtained was 5.85 g DW/l. Continuous stirred tank fermentation obtained a maximum effluent amylase activity of 6.9 kU/l and a maximum enzyme volumetric productivity of 2.73 kU/l-h. Both of these maximum values were observed at a dilution rate of 0.345 l/h. The immobilized cell reactor was observed to achieve larger volumetric productivities than either mode of stirred tank fermentation, but achieved an enzyme activity concentration lower than that of the batch stirred tank fermentor.     

Parallel substrate feeding and pH-control in shaking-flasks

An intermittent feeding system for shaking-flasks was developed to close the gap between batch operated shaking-flasks and fed-batch operated as well as pH-controlled stirred tank reactors. A precise syringe pump was connected via a substrate distribution system to individual 2/2-way miniature valves, one for each of up to 16 shaking-flask. The shaking-flasks were equipped with pH-probes. A process computer controls the intermittent feeding of substrates by tracking predefined individual feeding profiles as well as the base (or acid) addition for individual pH-control of the shaking-flasks. Higher concentrations of aerobic cells with higher cellular activities were achieved in fed-batch operated and pH-controlled shaking-flasks as compared to the conventional batch operation. Physiological effects of an intermittent feeding were studied in a stirred tank reactor with a recombinant E. coli strain, which expressed the GDP-mannose-pyrophosphorylase enzyme under the control of the lac-promoter.     

Process of penicillin G hydrolysis catalyzed by penicillin acylase immobilized on acylic carrier

The usefulness of penicillin acylase immobilized onto butyl acrylate — ethyl glycol dimethacrylate (called in this paper acrylic carrier) in penicillin G hydrolysis performed in a stirred tank reactor is shown. The enzyme-acrylic carrier preparation does not deteriorate its own properties in the mixing condition of slurry reactor. The experiments were carried out in a batch and a continuous stirred tank reactor as well as continuous stirred tank reactors in series. It was found to be a satisfactory agreement between experimental and predicted results. It also indicated the optimal substrate concentration range which provides the most effective enzyme operation. A superiority of the three reactors in series over the batch reactor is shown.List of Symbols C_E g/m³ equivalent enzyme concentration - C_SO mol/m³ initial penicillin G concentration - K_A mol/m³ substrate affinity constant - K_iS mol/m³ substrate inhibitory constant - K_iP mol/m³ PhAA inhibitory constant - K_iQ mol/m³ 6-APA inhibitory constant - k₃ mol/g min constant rate of dissotiation of the active complex - r mol/m³ rate of reaction - t min. reaction time - t_j min. maintenance time - degree of conversion - _B, _F dimensionless time - min. residence time - PA penicillin acylase - PG penicillin G - PhAA phenylacetic acid - 6-APA 6-aminopenicillanic acid     

Amidase active whole cells of Corynebacterium nitrilophilus for ammonium acrylate production

Summary Corynebacterium nitrilophilus amidase was studied with a view to it's use in ammonium acrylate production. Treatment of whole cells with l M acrylamide and 2 M ammonium acrylate solutions significantly reduced amidase activity. Immobilized C. nitrilophilus cells were used in batch and continuous bioreactors. Operation of the continuous reactor was found to be the most convenient way of producing steady state conditions for the study of enzyme stability.     

A new microfluidic concept for parallel operated milliliter-scale stirred tank bioreactors

Parallel miniaturized stirred tank bioreactors are an efficient tool for "high-throughput bioprocess design." As most industrial bioprocesses are pH-controlled and/or are operated in a fed-batch mode, an exact scale-down of these reactions with continuous dosing of fluids into the miniaturized bioreactors is highly desirable. Here, we present the development, characterization, and application of a novel concept for a highly integrated microfluidic device for a bioreaction block with 48 parallel milliliter-scale stirred tank reactors (V = 12 mL). The device consists of an autoclavable fluidic section to dispense up to three liquids individually per reactor. The fluidic section contains 144 membrane pumps, which are magnetically driven by a clamped-on actuator section. The micropumps are designed to dose 1.6 μL per pump lift. Each micropump enables a continuous addition of liquid with a flow rate of up to 3 mL h(-1) . Viscous liquids up to a viscosity of 8.2 mPa s (corresponds to a 60% v/v glycerine solution) can be pumped without changes in the flow rates. Thus, nearly all feeding solutions can be delivered, which are commonly used in bioprocesses. The functionality of the first prototype of this microfluidic device was demonstrated by double-sided pH-controlled cultivations of Saccharomyces cerevisiae based on signals of fluorimetric sensors embedded at the bottom of the bioreactors. Furthermore, fed-batch cultivations with constant and exponential feeding profiles were successfully performed. Thus, the presented novel microfluidic device will be a useful tool for parallel and, thus, efficient optimization of controlled fed-batch bioprocesses in small-scale stirred tank bioreactors. This can help to reduce bioprocess development times drastically.     

Casein hydrolysis in stirred tank reactors using chymotrypsin immobilized on magnetic supports

Nickel-NiO-BSA-chymotrypsin has been used to hydrolyze casein in both batch and continuous stirred tank reactors. The kinetics of hydrolysis in both types of reactor were considered. Some operational problems encountered using fine powder catalysts in batch stirred tank reactors are discussed. High gradient magnetic separation was found to be a powerful catalysts retention method for magnetic support particles, particularly when using a ferromagnetic collection matrix. Nickel particles of diameter 3–7 μm were easily separated from water at a processing velocity of 39 mm/sec. Nickel powder and precipitated Fe₃O₄ were also separated satisfactorily using a rotating drum magnetic separator.     

Optimal design of a number of membrane reactors in series using Michaelis-Menten one-substrate reversible kinetics

Summary Exact analytical expressions are derived for the optimal design (minimum overall reaction volume) of N perfectly mixed membrane reactors in series carrying out an enzyme catalysed Michaelis-Menten, one-substrate/one-product reversible reaction. The equations enable the direct calculation of the smallest total reactor volume needed for a given overall conversion degree. Results show that when substrate rejection is present, membrane reactors perform better compared with continuous stirred tank reactors.     

Development of a Polyaniline-coated Monolith Reactor for the Synthesis of Cephalexin Using Penicillin G Acylase Aggregates

A monolith reactor for the synthesis of cephalexin was developed using capillary columns. The micro channel in the monolith reactor was coated with polyaniline (PANI), and penicillin G acylase was aggregated with PANI using 0.5% of glutaraldehyde as a cross-linker. The developed monolith reactor exhibited many advantages over other enzyme reactors such as batch and continuous reactors. It showed fast enzyme reaction rates owing to the decrease in external mass transfer and internal diffusion limitations. The reactor can easily be scaled up by bundling together multiple monolith reactors, enabling a corresponding increase in feed rate. Furthermore, the monolith reactor showed good operational stability, with 95% of its original activity maintained after 48 h of continuous operation. The PANI coating on the surface of the capillary column increased the enzyme immobilization capacity and conversion was increased from 15.4% to 70.6% after PANI coating. The conversion ratio increased to approximately 70.6% with an increase in residence time and reactor length.     

Application of DNA amplification fingerprinting (DAF) to mixed culture bioreactors

Summary The use of DNA amplification fingerprinting (DAF) as a tool for monitoring mixed microbial populations in bioreactors was evaluated. Short (8-mer or 10-mer) oligonucleotides were used to prime DNA extracts from various biological reactors during polymerase chain reaction (PCR) amplification. The reactors examined in this study included two sets of anaerobic stirred tank continuous flow bioreactors. One set of anaerobic reactors was operated under methanogenic conditions and one set was operated under sulfate-reducing conditions. The anaerobic reactor communities in the methanol-fed reactors showed extensive DAF homology. DAF was also applied to a fixed-film azo dye degrading reactor to examine the degree of uniformity of colonization of the substratum in representative regions of the reactor. This method is a quick and relatively inexpensive means of monitoring microbial community structure during biological processes. Since no cultivation of the sample is involved, the genetic profile of the community is not biased by outgrowth conditions. DAF profiles may be useful for comparisons of population changes over time or of bench-scale vs pilot-scale reactors but not adequate for assessing community diversity.     

Genetically engineered Escherichia coli FBR5: Part I. Comparison of high cell density bioreactors for enhanced ethanol production from xylose

Five reactor systems (free cell batch, free cell continuous, entrapped cell immobilized, adsorbed cell packed bed, and cell recycle membrane reactors) were compared for ethanol production from xylose using Escherichia coli FBR5. In the free cell batch and free cell continuous reactors (continuous stirred tank reactor‐CSTR) productivities of 0.84 gL^?1 h^?1 and 1.77 gL^?1 h^?1 were achieved, respectively. A cell recycle membrane reactor resulted in the highest productivity of 55.56 gL^?1 h^?1, which is an increase of 66‐fold (e.g., 6614%) over the batch reactor. Calcium alginate gel CSTR resulted in a productivity of 2.04 gL^?1 h^?1 whereas adsorbed cell packed bed reactor resulted in a productivity of 4.39 gL^?1 h^?1. In the five reactor systems, ethanol concentrations ranged from 18.9 to 40.30 gL^?1 with metabolic yields from 0.44 to 0.51. Published 2012 American Institute of Chemical Engineers Biotechnol. Prog., 2012     

Comparison of the performances of stirred tank and airlift tower loop reactors.

Following a consideration of the prerequisites for reactor comparison and the fundamental differences between stirred tank and airlift tower loop reactors, their performances are compared for the production of secondary metabolites: penicillin V by Penicillium chrysogenum, cephalosporin C by Cephalosporium acremonium, and tetracycline by Streptomyces aureofaciens. In stirred tank reactors, cell mass concentrations, volumetric productivities, and specific power inputs are higher than in airlift tower loop reactors. In the latter, efficiencies of oxygen transfer are higher, and specific productivities with regard to power input, substrate and oxygen consumptions, and yield coefficients of product formation with regard to substrate and oxygen consumptions are considerably higher than in stirred tank reactors. The prerequisites for improved performance are discussed.     

Variable-volume continuous cultivation

Equations are developed which describe variable-volume cultivations, including fed-batch systems. An analogy is drawn between the quasi-steady state in variable-volume cultivation and a dynamic steady state in variable-flow, constant-volume chemostat bioreactors. Switching procedures are developed to give a steady-state transition from batch to fed-batch and to continuous operation. In this respect, considerations in the literature have been extended. Computer solutions of the governing differential equations verify the theory and provide insight into the behavior of variable-volume stirred tank reactors. Application of variable-volume cultivation as a tool in investigating growth rates at low substrate levels is suggested. Variable-volume bioreactor systems could be also to obtain controlled dynamic conditions for research or production purposes.     

Characterization of a quail suspension cell line for production of a fusogenic oncolytic virus

The development of efficient processes for the production of oncolytic viruses (OV) plays a crucial role regarding the clinical success of virotherapy. Although many different OV platforms are currently under investigation, manufacturing of such viruses still mainly relies on static adherent cell cultures, which bear many challenges, particularly for fusogenic OVs. Availability of GMP-compliant continuous cell lines is limited, further complicating the development of commercially viable products. BHK21, AGE1. CR and HEK293 cells were previously identified as possible cell substrates for the recombinant vesicular stomatitis virus (rVSV)-based fusogenic OV, rVSV-NDV. Now, another promising cell substrate was identified, the CCX.E10 cell line, developed by Nuvonis Technologies. This suspension cell line is considered non-GMO as no foreign genes or viral sequences were used for its development. The CCX.E10 cells were thus thoroughly investigated as a potential candidate for OV production. Cell growth in the chemically defined medium in suspension resulted in concentrations up to 8.9 × 10⁶ cells/mL with a doubling time of 26.6 h in batch mode. Cultivation and production of rVSV-NDV, was demonstrated successfully for various cultivation systems (ambr15, shake flask, stirred tank reactor, and orbitally shaken bioreactor) at vessel scales ranging from 15 mL to 10 L. High infectious virus titers of up to 4.2 × 10⁸ TCID₅₀/mL were reached in orbitally shaken bioreactors and stirred tank reactors in batch mode, respectively. Our results suggest that CCX.E10 cells are a very promising option for industrial production of OVs, particularly for fusogenic VSV-based constructs.     

Design of a tubular loop bioreactor for scale-up and scale-down of fermentation processes

Microorganisms traveling through circulation loops in large-scale bioreactors experience variations in their environment such as dissolved oxygen concentration and pH gradients. The same changes are not experienced in small bioreactors, and it is suggested that herein lies one of the major reasons for the problems encountered when translating fermentation data from one scale to another. One approach to study this problem is to look at the circulation loop itself. The present work concerns an attempt to simulate the circulation loops inside stirred tank reactors, using a tubular loop reactor specially constructed for the purpose. The reactor carries a number of ports and probes along its length for the determination of concentration gradients within. The broth is circulated around the loop by the use of peristaltic pumps, and the circulation time (t(c), s) is used as a measure of simulated reactor size. The reactor system has been evaluated using the citric acid fermentation by Aspergillus niger as a test process. Acid production and fungal morphology, in terms of the mean convex perimeter of mycelial clumps quantified by image analysis, were used as the parameters of evaluation for the two systems in comparison. From comparative experiments carried out in 10 and 200 L stirred tank bioreactors, it appears that the loop reactor simulates the corresponding stirred tank representing a valuable tool in scaling up and scaling down of fermentation process.     

Release of periplasmic penicillin amidase from Escherichia coli by chloroform shock

Penicillin amidase is a periplasmic enzyme in Escherichia coli. Conventionally, the periplasmic enzymes are released into the medium by osmotic shock which is tedious involving a number of centrifugation steps. The present communication deals with a simple technique for the release of penicillin amidase by chloroform shock. Experimental findings show that the periplasmic penicillin amidase does not show any variation by the chloroform treatment. This analysis was also extended to the E. coli cells grown at various concentrations of phenylacetic acid, optimal concentration of phenylacetic acid plus glucose and lactic acid.     

Amaranth decoloration by Trametes versicolor in a rotating biological contacting reactor

Sequential batch and continuous operation of a rotating biological contacting (RBC) reactor and the effects of dissolved oxygen on the decoloration of amaranth by Trametes versicolor were evaluated. Amaranth belongs to the group of azo dyes which are potential carcinogens and/or mutagens that can be transformed into toxic aryl amines under anaerobic conditions. Cultivation of T. versicolor in a stirred tank reactor was found to be unsuitable for amaranth decoloration due to significant biomass fouling and increase in medium viscosity. Assuming that decoloration follows first-order kinetics, amaranth was decolorized more rapidly when T. versicolor was immobilized on jute twine in a RBC reactor operated either in a sequential batch (k=0.25 h^–1) or in a continuous (0.051 h⁻¹) mode compared to a stirred tank reactor (0.015 h⁻¹). Oxygen was found to be essential for decoloration with the highest decoloration rates occurring at oxygen saturation. Although longer retention times resulted in more decoloration when the RBC was operated in the continuous mode (about 33% amaranth decoloration), sequential batch operation gave better results (>95%) under similar nutrient conditions. Our data indicate that the fastest decoloration should occur in the RBC using nitrogen-free Kirk’s medium with 1 g/l glucose in sequential batch operation at rotational speeds and/or aeration rates which maintain oxygen saturation in the liquid phase.