Two-phase olive mill waste composting: enhancement of the composting rate and compost quality by grape stalks addition

Two-phase olive mill waste (TPOMW) is a semisolid sludge generated by the olive oil industry. Its recycling as a soil amendment, either unprocessed or composted, is being promoted as a beneficial agricultural practice in the Mediterranean area. One of the major difficulties when composting TPOMW is the compaction of the material due to its dough-like texture, which leads to an inadequate aeration. For this reason, the addition of bulking agents is particularly important to attain a proper composting process. In this study we followed the evolution of two composting mixtures (A and B) prepared by mixing equal amounts of TPOMW and sheep litter (SL) (in a dry weight basis). In pile B grape stalks (GS) were added (10% dry weight) as bulking agent to study their effect on the development of the composting process and the final compost quality. The incorporation of grape stalks to the composting mixture changed the organic matter (OM) degradation dynamics and notably reduced the total amount of lixiviates. The evolution of several maturation indices (C/N, germination index, water soluble carbon, humification indices, C/N in the leachates) showed a faster and improved composting process when GS were added. Moreover, chemical (NH₄ ⁺, NO₃ ⁻, cation exchange capacity, macro and micronutrients, heavy metals) and physical properties (bulk and real densities, air content, total water holding capacity, porosity) of the final composts were analysed and confirmed the superior quality of the compost where GS were added.     

Cellulose and hemicelluloses recovery from grape stalks

In this work, two mild chemical fractionation procedures were compared to separate and recover lignocellulosic components from grape stalks. The first method consisted of mild acid hydrolysis for hemicelluloses separation, followed by an alkaline/oxidative step for lignin solubilization, while in the second method the acid hydrolysis was preceded by an alkali steeping phase. Influence of the length of the first step of both methods (from 2 to 24 h) on monosaccharides and cellulose yields was investigated. The first method allowed a higher sugar recovery for longer times, and a slightly lower amount of cellulose. Cellulose residues from both the methods were comparable for cellulose content and thermal profile (studied by differential scanning calorimetry). Acid hydrolysis of the first step was carried out also in autoclave, showing that xylan degradation could be described by a first order kinetics where at higher temperature the presence of a fast reaction and a slow reacting fraction must be accounted for.     

Composting of municipal solid waste

This paper reviews the literature on the composting process, which is one of the technological options for the processing of municipal solid wastes (MSWs). The process assumes a great significance, particularly from the point of its economic viability, capability for recycling of nutrients and waste minimization with minimum environmental problems. A number of studies on various aspects of the composting process, including process control and monitoring parameters such as temperature, pH, moisture content, aeration, and porosity are reviewed. Salient observations on microbial properties of composting are described and details of vermicomposting, as well as a detailed analysis of patents on composting of MSW, are presented.     

Composting of waste from palm oil mill: a sustainable waste management practice

Malaysia is blessed with abundant natural resources and bears a favorable climate for commercial cultivation of crops such as oil palm. In Malaysia the total plantation area of oil palm was 4,487,957 ha in 2008. It has been reported that in 2005 there was a total of 423 palm oil mills having production capacity of approximately 89 million tonnes of fresh fruit bunch (FFB) per year. Waste from the oil palm mill process include palm oil mill effluent (POME), generated mainly from oil extraction, washing and cleaning up processes. POME contains cellulosic material, fat, oil, and grease. Discharging untreated effluent into water streams may cause considerable environmental problems. The solid wastes generated are mainly decanter cake, empty fruit bunches, seed shells and fibre from the mesocarp. POME as well as the solid wastes may rapidly deteriorate the surrounding environment if not dealt with properly. Hence there is an urgent need for a sustainable waste management system to tackle these wastes. As these wastes are organic in origin, they are rich in plant nutrients. Composting of waste generated from palm oil mills can be good practice as it will be helpful in recycling useful plant nutrients. This review deals with various aspects of waste management practices in palm oil mills and the possibility of composting the wastes.     

Chromium (VI) uptake by grape stalks wastes encapsulated in calcium alginate beads: equilibrium and kinetics studies

Abstract

The removal of hexavalent chromium from aqueous solution using grape stalks wastes encapsulated in calcium alginate (GS–CA) beads was investigated. Cr(VI) sorption kinetics were evaluated as a function of chromium initial concentration and grape stalks (GS) content in the calcium alginate (CA) beads. The process follows pseudo second-order kinetics. Transport properties of hexavalent chromium on GS–CA beads was characterised by calculating chromium diffusion coefficient using the Linear Absorption Model (LAM). Langmuir isotherms, at pH 3.0 were used to describe sorption equilibrium data as a function of GS percentage in the CAbeads. Maximum uptake obtained was 86.42 mmol of Cr(VI) per L of wet sorbent volume. Results indicated that both kinetic and equilibrium models describe adequately the adsorption process.     

Composting of lead-contaminated solid waste with inocula of white-rot fungus

The treatment of the simulated lead-contaminated solid waste by composting with white-rot fungus was studied at laboratory scale. The composting system without the inocula of white-rot fungus was prepared as control, and the composting of the uncontaminated solid waste with the inocula of white-rot fungus was carried out as the other control. The results indicated that the solid waste inoculated with white-rot fungus could be successfully processed. The final compost was mature with 70.5% of lead (Pb) in residual fraction and none in exchangeable fraction. Germination index reached 120%. All the results indicated that the bioavailability of Pb in compost was reduced and the potential harm of Pb in compost was alleviated by composting with the inocula of white-rot fungus.     

Co-composting of hair waste from the tanning industry with de-inking and municipal wastewater sludges

Production of waste hair in the leather manufacturing industry is increasing every year due to the adoption of hair-save unhairing techniques, leaving the tanners with the problem of coping with yet another solid by-product. Numerous potential strategies for hair utilisation have been proposed. However, the use of hair waste as agricultural fertiliser is one of its most promising applications due to the high nitrogen content of hair. Agricultural value of hair can be increased by composting. This paper deals with the composting of hair from the unhairing of bovine hide. Results indicated that hair cannot be either composted on its own or co-composted with de-inking sludge, a chemical complementary co-substrate. However, good results were obtained when co-composted with raw sludge from a municipal wastewater treatment plant at hair:raw sludge weight ratios 1:1, 1:2 and, 1:4 in lab scale and pilot plant scale composters. In all cases, a more stable product was achieved at the end of the process. Composting in the pilot plant composter was effectively monitored using Static Respiration Indices determined at process temperature at sampling (SRI _T ) and at 37°C (SRI₃₇). Notably, SRI _T values were more sensitive to changes in the biological activity. In contrast, Respiratory Quotient (RQ) values were not adequate to follow the development of the process.     

Chromium sorption and Cr(VI) reduction to Cr(III) by grape stalks and yohimbe bark

In this work, two low cost sorbents, grape stalks and yohimbe bark wastes were used to remove Cr(VI) and Cr(III) from aqueous solutions. Batch experiments were designed to obtain Cr(VI) and Cr(III) sorption data. The mechanism of Cr(III) and Cr(VI) removal and Cr(VI) reduction to Cr(III) by the two vegetable wastes, has been investigated. Fourier transform infrared rays (FTIR) and X-ray photoelectron spectroscopy (XPS) analysis on solid phase were performed to determine the main functional groups that might be involved in metal uptake and to confirm the presence of Cr(III) on the sorbent, respectively. Results put into evidence that both sorbents are able to reduce Cr(VI) to its trivalent form.     

Solid state fermentation of orange peel and grape stalks by Pleurotus ostreatus,Agrocybe aegerita,and Armillariella mellea

Summary Solid state cultures of Pleurotus ostreatus, Agrocybe aegerita, and Armillariella mellea were carried out on orange peel (OP) and distillery grape stalks (GS), single or mixed, and compared with that on wheat straw (WS). Good levels of substrate colonization were achieved on OP and GS by P. ostreatus and A. aegerita, whereas A. mellea was grown on OP alone or mixed with GS. A. aegerita completed its life cycle producing basidiocarps on all substrates, while P. ostreatus fruited only on WS and OP+GS. A. mellea did not produce basidiocarps during the experiment. Indeed, P. ostreatus and A. aegerita depleted 50%–60% and 20%–30% of the lignin content, respectively, for OP and GS, while A. mellea degraded 22% of lignin only on GS. The latter fungus utilized only water soluble sugars on OP and OP+GS and so it would not be suitable for direct bioconversion of these raw materials. The results obtained, compared with those of the WS fermentation process, suggest the possibility of utilizing such lignocellulosic substrates as ruminant feed.     

A multiple extraction--centrifugation method for the recovery of viruses from waste water treatment plant effluents and sludges

Absorption of 14C-labelled poliovirus-2 to sedimentable solids of primary sludge samples collected from a secondary treatment facility during a 6-month period averaged 94%; for anaerobically digested sludge, 99%. The extent of virus adsorption was influenced by the amount of solids. Maximal adsorption occurred at or above 0.5% solids with sludge diluted with deionized water and above 1.5% solids when diluted with the respective particle-free sludge supernatants. A Tris-HCl buffer containing NaCl, glycerol, and serum was found to efficiently elute poliovirus-2 from primary sludge solids. By means of re-extraction and concentration by centrifugation (the TEC procedure), the average recoveries of poliovirus-2 were 92-94% based upon either infectivity or radioactivity analyses. Similarly, recoveries were 90-92% for poliovirus-2 in digested sludge. Maximum elution was dependent upon all four TEC buffer components and the restriction of solids to less than or equal to 1.0%. The procedure was found to be more efficient than glycine-NaOH and Freon procedures or elution with beef embryo extract. As adapted for effluents the procedure increased the yield and improved the consistency of virus recovery. The arithmetic mean titers and obtained during a monitoring study for primary and digested sludge were 4.2 X 10(5) and 5.1 X 10(3) plaque-forming units (pfu)/L; for primary, secondary, and final effluents 2.3 X 10(5), 4.7 X 10(3), and 4.7 X 10(2) pfu/L, respectively.     

堆肥发酵菌种的分离、鉴定及其堆肥发酵效果研究

为获得适应性良好的菌种用于猪粪的堆肥处理,从新鲜猪粪中分离出一株酵母样菌株783,并采用PCR技术扩增其18S rDNA基因,并测定其基因序列.基于18S rDNA序列同源性比对以及系统发育树的分析,发现783是解脂耶罗威亚酵母.菌株783的18S rDNA序列已经被GenBank数据库收录,其序列号为EU434621.对猪粪堆肥发酵效果表明其在提高堆肥质量方面有着较好的效果.     

堆肥微生物学研究现状与发展前景

综述了有机固体废弃物堆肥微生物学的研究方法的最新进展,以及堆肥过程中微生物的研究现状,提出了堆肥微生物学研究存在的主要问题和发展趋势。     

Industrial wastes and sludges management by vermicomposting

Vermicomposting has been arising as an innovative ecotechnology for the conversion of various types of wastes into vermicompost. Vermicompost is humus like, finely granulated and stabilized material which can be used as a soil conditioner to reintegrate the organic matter to the agricultural soils. Industrial wastes remain largely unutilized and often cause environmental problems like ground and surface water pollution, foul odours, occupying vast land areas etc. Non-toxic and organic industrial wastes could be potential raw material for vermitechnology. In the last two decades, vermitechnology has been applied for the management of industrial wastes and sludges and to convert them into vermicompost for land restoration practices. The success of the process depends upon several process parameters like quality of raw material, pH, temperature, moisture, aeration etc., type of vermicomposting system and earthworm species used. The review discusses the vermitechnology and the present state of research in the vermicomposting industrial sludges and wastes.     

Structure and energy of fusion stalks: the role of membrane edges

Fusion of lipid bilayers proceeds via a sequence of distinct structural transformations. Its early stage involves a localized, hemifused intermediate in which the proximal but not yet the distal monolayers are connected. Whereas the so-called stalk model most successfully accounts for the properties of the hemifused intermediate, there is still uncertainty about its microscopic structure and energy. We reanalyze fusion stalks using the theory of membrane elasticity. In our calculations, a short (cylindrical micelle-like) tether connects the two proximal monolayers of the hemifused membranes. The shape of the stalk and the length of the tether are calculated such as to minimize the overall free energy and to avoid the formation of voids within the hydrocarbon core. Our free energy expression is based on three internal degrees of freedom of a perturbed lipid layer: thickness, splay, and tilt deformations. Based on exactly the same model, we compare fusion stalks with and without the ability included to form sharp edges at the interfacial region between the hydrocarbon core and the polar environment. Requiring the interface to be smooth everywhere, our detailed calculations recover previous results: the stalk energies are far too high to account for the experimental observation of fusion intermediates. However, if we allow the interface to be nonsmooth, we find a remarkable reduction of the stalk free energy down to more realistic values. The corresponding structure of a nonsmooth stalk exhibits sharp edges at the transition regions between the bilayer and tether parts. In addition to that, a corner is formed at each of the two distal monolayers. We discuss the mechanism how membrane edges reduce the energy of fusion stalks.     

Effects of Elevated Tetracycline Concentrations on Aerobic Composting of Human Feces: Composting Behavior and Microbial Community Succession

The effects of antibiotics on aerobic composting are investigated by dosing of tetracycline (TC) in fresh human feces with sawdust as biomass carrier. Variability in process parameters such as temperature, pH, water-soluble carbon, germination index (GI) and dehydrogenase activity (DHA) are evaluated at TC dosages of 0, 100, 250 and 500 mg/kg in a 21-day composting. Moreover, microbial community succession is examined by high-throughput 16S rRNA gene sequencing. Findings indicate significant impacts to the process parameters with the increase of TC concentration such as inhibition of temperature increases during aerobic composting, lowering of pH, increasing of water-soluble carbon residue, a decrease of GI, and hindering of DHA. Furthermore, elevated TC concentrations significantly alter the microbial community succession and reduce the community diversity and abundance. Therefore, interference in microbial community structures and a hindrance to biological activity are believed to be the main adverse effects of TC on the composting process and maturity of the composting products.     

Hydrothermal treatment and ethanol pulping of sunflower stalks

The influence of temperature in the hydrothermal treatment of sunflower stalks on the composition of the liquid fraction obtained was examined. The remaining solid fraction was subjected to ethanol pulping in order to obtain pulp that was used to produce paper sheets. The pulp was characterized in terms of yield, kappa index, viscosity, and cellulose, hemicellulose and lignin contents; and the paper sheets in terms of breaking length, stretch, burst index and tear index. Hydrothermal treatment of the raw material at 190 degrees C provided a liquid phase with maximal hemicellulose-derived oligomers and monosaccharide (glucose, xylose and arabinose) contents (26.9 and 4.2 g/L, respectively). Pulping the solid fraction obtained by hydrothermal treatment at 180 degrees C, with 70% ethanol at a liquid/solid ratio of 8:1 at 170 degrees C for 120 min provided pulp with properties on a par with those of soda pulp from the sunflower stalks, namely: 36.3% yield, 69.1% cellulose, 12.6% hemicellulose, 18.2% lignin and 551 ml/g viscosity. Also, paper sheets obtained from the ethanol pulp were similar in breaking length (3.8 km), stretch (1.23%), burst index (1.15 kN/g) and tear index (2.04 m Nm(2)/g) to those provided by soda pulp.     

Aerobic composting performance and simulation of mixed sludges

The objectives of this study were twofold: to determine the specific oxygen consumption rate of mixed sludges by means of a respirometry study, and to investigate the applicability of a developed model to a pilot-scale reactor containing nightsoil and brewery sludges. The results of the study revealed the specific oxygen consumption rates to be 87.7 mg O₂/kg VS-hr and 117.7 mg O₂/kg VS-hr at temperatures of 25 °C and 35 °C, respectively. Oxygen was found to be consumed at a higher rate in the reactor operated at the higher temperature. The computer simulation for temperature variations in the pilot-scale reactor showed a good relationship between the simulated and the measured temperatures. After three days operation, the highest simulated temperature was 65 °C, whereas the highest measured temperature was 60 °C. In addition, results suggest that the model can provide an accurate air supply rate to indicate economical reactor operation.