Fabrication of a cell-adhesive protein imprinting surface with an artificial cell membrane structure for cell capturing

We proposed a new molecular imprinting procedure based on molecular integration for the purpose of cell capture. We selected the cell-adhesive protein fibronectin (FN) as the imprinting protein for preparing templates and evaluated selective cell adhesion on the FN imprinting substrate. Silica beads with a diameter of 15 μm were used as the stamp matrix and FN molecules were adsorbed as a monolayer. The FN recognition sites were constructed by integrating a surfactant as the ligand and immobilizing it with new biocompatible photoreactive phospholipid polymer composed of 2-methacryloyloxyethyl phosphorylcholine (MPC) units. As control substrates, imprinting procedures were carried out using albumin (BSA imprinting substrate) and without imprinting protein (non-imprinting substrate). The binding of FN from the cell culture medium with the fetal calf serum was achieved on the FN imprinting substrate, and induced the cell adhesion. On the other hand, on the non-imprinted and BSA imprinting substrates, the FN scarcely bound from the cell culture medium, and subsequent cell adhesion could not be observed on the substrate. These results indicate that the FN binding sites were well constructed by arranging the ligand surfactant to a suitable position and immobilized by the photoreactive MPC polymer. The MPC polymer prevented the nonspecific adsorption of proteins from the cell culture medium. We concluded that this procedure is convenient and can be potentially used for the preparation of surfaces for cell engineering devices.     

Molecularly imprinted polymers—A closer look at the control polymer used in determining the imprinting effect: A mini review

Molecular recognition displayed by naturally occurring receptors has continued to inspire new innovations aimed at developing systems that can mimic this natural phenomenon. Since 1930s, a technology called molecular imprinting for producing biomimetic receptors has been in place. In this technology, tailor made binding sites that selectively bind a given target analyte (also called template) are incorporated in a polymer matrix by polymerizing functional monomers and cross‐linking monomers around a target analyte followed by removal of the analyte to leave behind cavities specific to the analyte. The success of the imprinting process is defined by two main figures of merit, that is, the imprinting factor, and selectivity, which are determined by comparing the amount of target analyte or structural analogue bound by the molecularly imprinted polymer (MIP) and the nonimprinted polymer (NIP). NIP is a control synthesized alongside the MIP but in the absence of the template. However, questions arise on whether these figures of merit are reliable measures of the imprinting effect because of the significant differences between the MIP and the NIP in terms of their physical and chemical characteristics. Therefore, this review critically looks into this subject, with a view of defining the best approaches for determining the imprinting effect.     

Fluorescent competitive flow-through assay for chloramphenicol using molecularly imprinted polymers

It is a fact that molecular imprinting techniques have reached tremendous importance in the research of new artificial recognition systems. These methods resemble the mechanism of natural recognition, generally based on non-covalent interactions, but improving their stability by means of a simple and inexpensive technique. Molecular imprinting polymers (MIPs) are easily obtained by copolymerisation of suitable functional monomers and crosslinkers in the presence of the print molecule. Removal of the template leaves a polymer that selectively recognises it. In this work, different imprinted polymers for chloramphenicol (CAP) obtained using different monomers and polymerisation conditions were tested in a HPLC system, in order to obtain a highly selective material for CAP. The optimised MIP was then used as recognition phase in a fluorescent competitive flow assay to determine chloramphenicol.     

Syntheses of chitin-based imprinting polymers and their binding properties for cholesterol

A novel chitin derivative, cholesteryl chitin carbonate (Chitin-Chol), was synthesized from chitin and cholesteryl chloroformate. This product was characterized by Fourier transform infrared (FTIR) spectroscopy and solid-state ¹³C nuclear magnetic resonance (¹³C NMR), and was used as a covalently bound template precursor for imprinting cholesterol. After cross-linking with toluene 2,4-diisocyanate, it was efficiently cleaved hydrolytically to afford a guest-binding site accompanying the easy and efficient removal of a sacrificial spacer. The selectivity and efficacy of a chitin-based imprinting polymer for steroid binding were assessed by a chromatographic screening process. The results of binding experiments showed that this molecular imprinting polymer (MIP) has a high binding capacity with cholesterol. The target discrimination towards cholesterol over its close structural analogue suggested that the polymer recognition site was possible on the basis of the inversion of configuration of a single hydroxyl group. In addition, non-covalent imprinting was done using chitin as a precursor and its binding properties for cholesterol were also evaluated.     

Computer-simulation-based selection of optimal monomer for imprinting of tri-O-acetyl adenosine in a polymer matrix: calculations for benzene solution

Molecular imprinting is a promising way to create polymer materials that can be used as artificial receptors, and have anticipated use in synthetic imitation of natural antibodies. In case of successful imprinting, the selectivity and affinity of the imprint for the substrate molecules are comparable with those of natural counterparts. Various calculation methods can be used to estimate the effects of a large range of imprinting parameters under different conditions, and to find better ways to improve polymer characteristics. However, one difficulty is that properties such as hydrogen bonding can be modeled only by quantum methods that demand a lot of computational resources. Combined quantum mechanics/molecular mechanics (QM/MM) methods allow the use of MM and QM for different parts of the modeled system. In present study this method was realized in the NWChem package to compare estimations of the stability of tri-O-acetyl adenosine–monomer pre-polymerization complexes in benzene solution with previous results under vacuum.     

TLINKAGE-IMPRINT: a model-based approach to performing two-locus genetic imprinting analysis

OBJECTIVES: Imprinting refers to the expression of only one copy of a gene pair, which is determined by the parental origin of the copy. Imprinted genes play a role in the development of several complex diseases, including cancers and mental disorders. In certain situations, two-trait-loci models are shown to be more powerful than one-trait-locus models. However, no current methods use pedigree structure efficiently and perform two-locus imprinting analyses. In this paper, we apply the Elston-Stewart algorithm to the parametric two-trait-loci imprinting model used by Strauch et al. [2000] to obtain a method for qualitative trait linkage analyses that explicitly models imprinting and can be applied to large pedigrees. METHODS: We considered a parametric approach based on 4 x 4 penetrance matrix to account for imprinting and modified TLINKAGE software to implement this approach. We performed simulation studies using a small and a large pedigree under dominant and imprinted and dominant or imprinted scenarios. Furthermore, we developed a likelihood ratio-based test for imprinting that compares the logarithm of odds (LOD) score obtained using the two-locus imprinting model with that obtained using the standard two-locus model that does not allow for imprinting. RESULTS: In simulation studies of three scenarios where the true mode of inheritance included imprinting, accurate modeling through the proposed approach yielded higher LOD scores and better recombination fraction estimates than the traditional two-locus model that does not allow for imprinting. CONCLUSIONS: This imprinting model will be useful in identifying the genes responsible for several complex disorders that are potentially caused by a combination of imprinted and non-imprinted genes.     

Composite of CdTe quantum dots and molecularly imprinted polymer as a sensing material for cytochrome c

A newly designed molecularly imprinted polymer (MIP) material was fabricated and successfully utilized as recognition element to develop a quantum dots (QDs) based MIP-coated composite for selective recognition of the template cytochrome c (Cyt). The composites were synthesized by sol-gel reaction (imprinting process). The imprinting process resulted in an increased affinity of the composites toward the corresponding template. The fluorescence of MIP-coated QDs was stronger quenched by the template versus that of non-imprinted polymer (NIP)-coated QDs, which indicated the composites could recognize the corresponding template. The results of specific experiments further exhibited the recognition ability of the composites. Under optimum conditions, the linear range for Cyt is from 0.97 μM to 24 μM, and the detection limit is 0.41 μM. The new composites integrated the high selectivity of molecular imprinting technology and fluorescence property of QDs and could convert the specific interactions between imprinted cavities and corresponding template to the obvious changes of fluorescence signal. Therefore, a simple and selective sensing system for protein recognition has been realized.     

Construction of a molecular imprinting catalyst using target analogue template and its application for an amperometric fructosylamine sensor

Molecular imprinting technology is becoming a versatile tool for preparing tailor-made molecular recognition elements. However, inherent problems of the molecular imprinting technology include the availability and preparation of template molecules. We recently reported artificial enzyme sensors for fructosylamines constructed by imprinting with fructosyl valine (Fru-val), a model compound for HbA1c (Anal. Lett., 2003). However, because the availability of Fru-val is limited, we attempted to construct a Fru-val-oxidizing molecularly imprinted catalyst (MIC) utilizing the analogue molecule methyl valine (m-val) as template molecule. An electrode employing the m-val-imprinted polymer showed 1.2-fold higher sensitivity toward Fru-val compared with the control polymer-employing electrode. We also used the positively charged functional monomer allylamine as functional monomer in order to increase the selectivity of the MIC toward Fru-val. The selectivity of the electrode immobilizing the allylamine-containing polymer showed 1.7-fold higher response toward Fru-val than toward Fru--lys. By combining the use of both allylamine as the functional monomer and m-val as the template molecule, an even better MIC-immobilized electrode was produced with a Fru-val selectivity comparable to that constructed by imprinting with Fru-val.     

Novel chiral recognition elements for molecularly imprinted polymer preparation

The use of a novel chiral functional monomer system in molecular imprinting protocols is described. The monomer, dibenzyl (2R,3R)-O-monoacryloyl tartrate, possesses a hydroxyl moiety which can be used to direct template-functional monomer interactions during molecular imprinting polymerization. This system simultaneously positions benzyl ester-protected carboxyl groups in close proximity to the template, which upon deprotection yield recognition sites with stronger ligand-binding capacities. Furthermore, the inherent chirality of the monomer engenders the polymer with an inbuilt preference for a given stereoisomer. Application of the system to the molecular imprinting of the cinchonidine alkaloids (+)-cinchonine and (-)-cinchonidine yielded stereoselective polymers. The effect of imprinting (+)-cinchonine produced a polymer which more than reversed the inherent chiral selectivity of the chiral monomer residues present in the matrix.     

Optimization of virus imprinting methods to improve selectivity and reduce nonspecific binding

Molecular imprinting is a technique that creates synthetic materials containing highly specific receptor sites that have an affinity for a target molecule. When large particles such as viruses are imprinted, special consideration must be taken to ensure the formation of complementary cavities. Factors that influence imprint formation, include uniformity of the precross-linked mixture and release of the virus template after cross-linking. In this study, tobacco mosaic virus (TMV) was used as a model virus. Polymer-virus aggregates formed when poly(allylamine hydrochloride) (PAA) was mixed with TMV at low polymer concentrations (<0.0001% w/v), but such aggregates were prevented at high polymer concentrations (>25% w/v). Various wash protocols were compared for their ability to remove the virus template from the cross-linked molecularly imprinted polymer (MIP), with sodium hydroxide (1 M) exhibiting the best performance. On the basis of these results, optimized MIPs targeted for TMV virus were synthesized, exhibiting a high affinity to TMV (imprinting factor of 2.3) and low affinity to tobacco necrosis virus, the nontarget virus.     

Surface imprinting polymers for the recognition of nucleotides

A highly selective polymer has been prepared for the selective separation of nucleotides by the surface imprinting polymerization. A dialkyl quaternary ammonium chloride was effective as the functional molecule for recognizing the difference in the structure of nucleotides. Adsorptive behavior of the ionic species of the structural analogues, inosine-5'-monophosphoric acid (IMP) and guanosine-5'-monophosphoric acid (GMP), could be controlled by changing the pH condition. Surface imprinting polymers were prepared under different pH conditions; pH 9.0 and pH 8.5. The IMP-imprinted polymers exhibited higher template effect for IMP than for a structural analogue, GMP. A reference polymer prepared without the imprint molecule neither exhibit any selectivity to IMP nor to GMP. The adsorption behavior was quantitatively evaluated by the binding constants for the IMP-imprinted polymer. The imprinting polymer was found to recognize a small structural difference in nucleotides.     

Molecular imprinting in monolayer surfaces

A comprehensive report on molecularly imprinted monolayers (MIMs) is presented, but does not include bulk-polymer thin film coatings on surfaces, inorganic surface imprinting, polymer grafting and layer-by-layer methods. Due to difficulties in imprinting large molecules and obtaining fast binding responses with traditional network polymer materials, MIMs have been developed with the aim of enhancing mass-transfer of analytes in imprinted materials. Three approaches to MIM fabrication have been developed with respect to the formation of the pre-organized template-matrix complex. In the first approach, the molecular binding sites are formed in a monolayer on a glass or gold surface. The second approach uses a template-macromolecule complex to form binding sites in the solution phase that are immobilized onto a surface; and the third approach transfers an imprinted Langmuir film onto a gold surface. Mass transfer in these MIMs in most cases is on the order of minutes, and both small and large molecules (proteins) have been imprinted.     

Verification of epigenetic inheritance in a unicellular model system: multigenerational effects of hormonal imprinting

The unicellular Tetrahymena has receptors for hormones of higher vertebrates, produces these hormones, and their signal pathways are similar. The first encounter with a hormone in higher dose provokes the phenomenon of hormonal imprinting, by which the reaction of the cell is quantitatively modified. This modification is transmitted to the progeny generations. The duration of the single imprinter effect of two representative signal molecules, insulin and 5-HT (5-hydroxytryptamine), in two concentrations (10-6 and 10-15 M) were studied. The effects of imprinting were followed in 5 physiological indices: (i) insulin binding, (ii) 5-HT synthesis, (iii) swimming behaviour, (iv) cell growth and (v) chemotaxis in progeny generations 500 and 1000. The result of each index was different from the non-imprinted control functions, growth rate, swimming behaviour and chemotactic activity to insulin being enhanced, while others, e.g. synthesis and chemotactic responsiveness of 5-HT and the binding of insulin were reduced. This means that a function-specific heritable epigenetic change during imprinting occurs, and generally a single encounter with a femtomolar hormone concentration is enough for provoking durable and heritable imprinting in Tetrahymena. The experiments demonstrate the possibility of epigenetic effects at a unicellular level and call attention to the possibility that the character of unicellular organisms has changed through to the present day due to an enormous amount of non-physiological imprinter substances in their environment. The results - together with results obtained earlier in mammals - point to the validity of epigenetic imprinting effects throughout the animal world.     

Covalent molecular imprinting of bisphenol A using its diesters followed by the reductive cleavage with LiAlH(4)

Bisphenol A (BPA) recognition materials were synthesized by a covalent imprinting technique using BPA-dimethacrylate or BPA-diacrylate as the template monomer. Binding sites in the polymers consisted of two hydroxyl groups that are generated by reducing the ester bonds of the template monomer with lithium aluminum hydride. The polymers strongly adsorbed BPA and structurally related compounds, however, other endocrine disruptors were hardly adsorbed. The BPA-dimethacrylate-based polymer interacted with the samples more strongly than the BPA-diacrylate-based polymer.     

Molecularly imprinted polymers (MIP) in electroanalysis of proteins

The review summarizes current knowledge on the main approaches used for creation of high affinity polymer analogs of antibodies (known as molecularly imprinted polymers, MIP) applicable for electroanalysis of functionally important proteins such as myoglobin, troponin T, albumin, ferritin, lysozyme, calmodulin. The main types of monomers for MIP preparation as well as methods convenient for analysis of MIP/protein interactions, such as surface plasmon resonance (SPR), nanogravimetry with the use of a quartz crystal resonator (QCM), spectral and electrochemical methods have been considered. Special attention is paid to experimental data on electrochemical registration of myoglobin by means of o-phenylenediaminebased MIP electrodes. It was shown that the imprinting factor calculated as a ratio of the myoglobin signal obtained after myoglobin insertion in MIP to the myoglobin signal obtained after myoglobin insertion in the polymer lacking the molecular template (NIP) is 2–4.     

Molecularly imprinted nanopatterns for the recognition of biological warfare agent ricin

Molecularly imprinted polymer (MIP) for biological warfare agent (BWA) ricin was synthesized using silanes in order to avoid harsh environments during the synthesis of MIP. The synthesized MIP was utilized for the recognition of ricin. The complete removal of ricin from polymer was confirmed by fluorescence spectrometer and SEM–EDAX. SEM and EDAX studies confirmed the attachment of silane polymer on the surface of silica gel matrix. SEM image of Ricin-MIP exhibited nanopatterns and it was found to be entirely different from the SEM image of non-imprinted polymer (NIP). BET surface area analysis revealed more surface area (227 m²/g) for Ricin-MIP than that of NIP (143 m²/g). In addition, surface area study also showed more pore volume (0.5010 cm³/g) for Ricin-MIP than that of NIP (0.2828 cm³/g) at 12 nm pore diameter confirming the presence of imprinted sites for ricin as the reported diameter of ricin is 12 nm. The recognition and rebinding ability of the Ricin-MIP was tested in aqueous solution. Ricin-MIP rebound more ricin when compared to the NIP. Chromatogram obtained with Ricin-MIP exhibited two peaks due to imprinting, however, chromatogram of NIP exhibited only one peak for free ricin. SDS-PAGE result confirmed the second peak observed in chromatogram of Ricin-MIP as ricin peak. Ricin-MIP exhibited an imprinting efficiency of 1.76 and it also showed 10% interference from the structurally similar protein abrin.     

Amperometric detection of bilirubin from a micro-sensing electrode with a synthetic bilirubin imprinted poly(MAA-co-EGDMA) film

Poly(methacrylic acid-co-ethyl glycol dimethylacrylate) (poly(MAA-co-EGDMA)) imprinted with alpha-bilirubin was shown to be able to bind alpha-bilirubin in our previous work. In this work, the corresponding imprinted polymer thin film was synthesized onto a thiol treated Au electrode by surface grafting polymerization. Bilirubin was able to be detected by an Au electrode, however, the electrode was not be able to discriminate bilirubin from the other matrix components if clinical samples were used. Therefore, the imprinted material was introduced so that the modified Au electrode could specifically detect bilirubin. Optimal potential was found to be 0.55 V and this was set for the rest of experiments. The imprinting factor of 3.16 was confirmed by comparing the signals from the MIP-Au and the NIP (non-imprinted polymer)-Au electrode. Calibration of the bilirubin concentration with respect to the current by the MIP-Au electrode was made within the range of 5mg/dl and a detection sensitivity of 0.644 microA/mg/dl (2.58 microA/cm(2)/mg/dl) was obtained. Furthermore, a linear correlation of the bilirubin concentration within 1.0mg/dl versus detection current was also achieved. Bilirubin was further detected by the MIP-Au electrode in the presence of fetal bovine serum (FBS). Repeated detection of bilirubin with at least three detection batches was performed and the reproducibility of the same piece of MIP-Au electrode was confirmed. The result was compared to those obtained from the serum and the solvent solution. The results indicated the feasibility of using the bilirubin imprinted poly(MAA-co-EGDMA) film as a sensing electrode for the clinical detection of bilirubin in serum.     

Molecular imprinting of nitrophenol and hydroxybenzoic acid isomers: effect of molecular structure and acidity on imprinting

Three nitrophenol isomer-imprinted polymers were prepared under the same conditions using 4-vinylpyridine as a functional monomer. Different recognition capacities for template molecules were observed for the three polymers. Another imprinting system with stronger acidity than nitrophenol isomers, 2-hydroxybenzoic acid (salicylic acid) and 4-hydroxybenzoic acid, was imprinted using 4-vinylpyridine or acrylamide as functional monomer respectively. Both 4-hydroxybenzoic acid-imprinted polymers using the two monomers showed recognition ability for the template molecule. However, when acrylamide was chosen as functional monomer, the salicylic acid-imprinted polymer showed very weak recognition for the template molecule, whereas strong recognition ability of the resultant polymer for salicylic acid was observed with 4-vinylpyridine as functional monomer. It seems that the structure and acidity of template molecules is responsible for the difference in recognition, by influencing the formation and strength of interaction between template molecule and functional monomer during the imprinting process. An understanding of the mechanism of molecular imprinting and molecular recognition of MIPs will help to predict the selectivity of MIPs on the basis of template molecule properties.     

Secondary imprinting in the domestic chick blocked by previous exposure to a live hen

Two experiments were carried out to investigate secondary imprinting in the domestic chick, Gallus gallus. Experiment 1 established that, after chicks with very limited prior visual experience had been exposed to a moving cup during the first 3 days of life, the cup when stationary would suppress distress calling. The main experiment, experiment 2, then examined the effects of various forms of prior experience on the development of this kind of imprinting. Three groups of chicks were exposed on days 1 and 2 to either a live hen (Hen group), a moving object (Windmill group) or the same object when stationary (Control group). On days 4, 5 and 6 all subjects were given training of the kind used in experiment 1; imprinting to the cup was obtained in the Windmill and Control groups, but not in the Hen group. On days 11 and 12 retention tests were given; these showed good retention of primary imprinting, in that the cup was still effective in suppressing distress calling in the Control group and likewise the windmill in the Windmill group, but no effect of secondary imprinting was detected, in that the cup no longer affected the behaviour of the chicks in the Windmill group. These results indicated that primary imprinting with certain stimuli, as in the Hen group, can subsequently exert powerful interference with secondary imprinting and they supported a previous claim that, where secondary imprinting does occur, it is relatively unstable.