Immobilization of epoxide hydrolase from Aspergillus niger onto DEAE-cellulose: enzymatic properties and application for the enantioselective resolution of a racemic epoxide

Recombinant epoxide hydrolase (EH) from Aspergillus niger can be a very promising tool for the resolution of various racemic epoxides by enantioselective hydrolysis. The enzyme was successfully immobilized by ionic adsorption onto DEAE-cellulose (99% yield, 70% of retention activity). The temperature for maximal activity (40 °C) and the activation energy (38.8 kJ/mol) were similar for both the immobilized and free EHs, whereas the optimal pH was about one unit less for the immobilized enzyme. Thermal stability was also affected by immobilization; the immobilized enzyme appeared to be slightly less stable than the free one. However, a gram-scale resolution of racemic para-chlorostyrene oxide (pCSO) was successfully carried out in a repeated batch reactor, operated for seven cycles. Furthermore, using a very high substrate concentration of 2 M (306 g/L), i.e. biphasic conditions, the resolution of 3 g of pCSO was also achieved in a repeated batch reactor using approximately 300 mg of immobilized EH, corresponding to less than 3 mg of the enzymatic powder.     

Immobilization of the epoxide hydrolase from Aspergillus niger

Three methods for the immobilization of the epoxide hydrolase from the fungus Aspergillus niger were tested. The highest immobilization yield (90%) and retention of activity (65%) were obtained by adsorption onto DEAE-cellulose compared to adsorption onto hydrophobic porous polypropylene and covalent linkage using Eupergit resin. The enzymatic properties of the immobilized enzyme were similar to those of the free enzyme with respect to the effect of temperature and pH on both activity and stability as well as the effect of solvent (DMF) on activity. The kinetic parameters were affected leading to lower K _M(app) and higher Vm _(app).     

Stabilization of Nocardia EH1 epoxide hydrolase by immobilization

A partially purified epoxide hydrolase from Nocardia EH1 was stabilized by immobilization through ionic binding onto DEAE-cellulose. This biocatalyst showed more than twice the activity (225 %) of that of the free enzyme albeit at a marginal reduction in enantioselectivity. The addition of the nonionic detergent Triton X-100 during the immobilization further enhanced the stability as indicated by a dramatic shift in the temperature optimum from 35 to 45°C. The stabilized immobilized biocatalyst could be successfully employed in repeated batch reactions (residual activity of 55% after five cycles), which was not the case for whole cell reactions (residual activity 10 %). © Rapid Science Ltd. 1998     

Enantioselective epoxide hydrolase activity of a newly isolated microorganism, Sphingomonas echinoides EH-983, from seawater

A marine microorganism, Sphingomonas echinoides EH-983, which possesses epoxide hydrolase (EH) activity was isolated from seawater and characterized. The EH of S. echinoides EH-983 preferentially metabolized (R)-enantiomer when the racemic styrene oxides were supplied as substrates. The optimal pH and temperature for the enantioselective hydrolysis by whole-cells ofS. echinoides EH-983 were 7.0 and 20 °C, respectively. When kinetic resolution was conducted with a racemic mixture of styrene oxides at an initial concentration of 40 mM, enantiopure (S)-styrene oxide was obtained in 180 min with a yield of 21.3%. To our best knowledge, S. echinoides EH-983 is the first marine microorganism that is reported to have EH activity.     

Preparative-scale kinetic resolution of racemic styrene oxide by immobilized epoxide hydrolase

Epoxide hydrolase from Aspergillus niger was immobilized onto the modified Eupergit C 250 L through a Schiff base formation. Eupergit C 250 L was treated with ethylenediamine to introduce primary amine groups which were subsequently activated with glutaraldehyde. The amount of introduced primary amine groups was 220 μmol/g of the support after ethylenediamine treatment, and 90% of these groups were activated with glutaraldehyde. Maximum immobilization of 80% was obtained with modified Eupergit C 250 L under the optimized conditions. The optimum pH was 7.0 for the free epoxide hydrolase and 6.5 for the immobilized epoxide hydrolase. The optimum temperature for both free and immobilized epoxide hydrolase was 40 °C. The free epoxide hydrolase retained 52 and 33% of its maximum activity at 40 and 60 °C, respectively after 24 h preincubation time whereas the retained activities of immobilized epoxide hydrolase at the same conditions were 90 and 75%, respectively. Immobilized epoxide hydrolase showed about 2.5-fold higher enantioselectivity than that of free epoxide hydrolase. A preparative-scale (120 g/L) kinetic resolution of racemic styrene oxide using immobilized preparation was performed in a batch reactor and (S)-styrene oxide and (R)-1-phenyl-1,2-ethanediol were both obtained with about 50% yield and 99% enantiomeric excess. The immobilized epoxide hydrolase was retained 90% of its initial activity after 5 reuses.     

Preparative-scale kinetic resolution of racemic styrene oxide by immobilized epoxide hydrolase

Epoxide hydrolase from Aspergillus niger was immobilized onto the modified Eupergit C 250 L through a Schiff base formation. Eupergit C 250 L was treated with ethylenediamine to introduce primary amine groups which were subsequently activated with glutaraldehyde. The amount of introduced primary amine groups was 220 μmol/g of the support after ethylenediamine treatment, and 90% of these groups were activated with glutaraldehyde. Maximum immobilization of 80% was obtained with modified Eupergit C 250 L under the optimized conditions. The optimum pH was 7.0 for the free epoxide hydrolase and 6.5 for the immobilized epoxide hydrolase. The optimum temperature for both free and immobilized epoxide hydrolase was 40 °C. The free epoxide hydrolase retained 52 and 33% of its maximum activity at 40 and 60 °C, respectively after 24h preincubation time whereas the retained activities of immobilized epoxide hydrolase at the same conditions were 90 and 75%, respectively. Immobilized epoxide hydrolase showed about 2.5-fold higher enantioselectivity than that of free epoxide hydrolase. A preparative-scale (120 g/L) kinetic resolution of racemic styrene oxide using immobilized preparation was performed in a batch reactor and (S)-styrene oxide and (R)-1-phenyl-1,2-ethanediol were both obtained with about 50% yield and 99% enantiomeric excess. The immobilized epoxide hydrolase was retained 90% of its initial activity after 5 reuses.     

Functional expression and magnetic nanoparticle-based Immobilization of a protein-engineered marine fish epoxide hydrolase of <Emphasis Type="Italic">Mugil cephalus</Emphasis> for enantioselective hydrolysis of racemic styrene oxide

A triple-point mutated fish microsomal epoxide hydrolase (mEH) gene from Mugil cephalus was expressed in Escherichia coli in the presence of various chaperones to prevent protein aggregations. The enantioselective hydrolytic activity was more than doubled by co-expressing the EH mutant gene with pGro7 plasmid. The highly active EH mutant with a his-tag was immobilized onto magnetic silica assembled with NiO nanoparticles. The immobilized mEH mutant was re-used more than 10 times with less than 10% activity loss. (S)-Styrene oxide with 98% enantiopurity was repeatedly obtained with over 50% of the theoretical yield by the magnetically separable high-performance mEH mutant.     

定点突变提高环氧化物水解酶AuEH2催化对甲基苯基缩水甘油醚的对映选择性*

环氧化物水解酶可催化外消旋环氧化物的动力学拆分或对映归一性水解制备手性环氧化物或邻二醇,具有广阔的应用前景.为提高宇佐美曲霉环氧化物水解酶 (AuEH2) 催化外消旋对甲基苯基缩水甘油醚 (rac-pMPGE) 的对映体选择率 (E).通过分子动力学模拟 (MD) 选取相互作用频率最高的位点A250替换为其他19种氨基酸;选取对映选择性显著提高的突变体测定其动力学参数 (K_m和k_cat) 及区域选择性系数 (β_S和β_R),并利用重组大肠杆菌全细胞拆分rac-pMPGE.突变体AuEH2^A250H的E值从12.7提高至38.4,重组菌比活力为51.9U/g湿细胞;其水解 (S)-pMPGE的k_cat/K_m从10.0mmol/(L·s)提高至12.8 mmol/(L·s),而水解 (R)-pMPGE的k_cat/K_m从1.13mmol/(L·s)降低至0.35mmol/(L·s);全细胞拆分20mmol/L rac-pMPGE获得 (R)-pMPGE的ee_s为>99%,产率从33.0% 提高至40.7%.A250位点的突变对AuEH2的对映选择性和酶活力具有显著影响;高对映选择性的AuEH2突变体在制备高光学纯的 (R)-pMPGE中具有应用潜力.     

Immobilization and biocatalysis of chlorophyllase in selected organic solvent systems

Chlorophyllase extract from Phaeodactylum tricornutum was immobilized by physical adsorption on DEAE-cellulose and silica gel as well as by covalent binding on Eupergit C, Eupergit C250L, Eupergit C/ethylenediamine (EDA) and Eupergit C250L/EDA. Although the highest immobilization yield (83-93%) and efficiency (51-53%) were obtained when chlorophyllase extract was immobilized on DEAE-cellulose and silica gel, there was no improvement in the thermal stability of chlorophyllase as compared to that of the free one. The immobilization of chlorophyllase extract on Eupergit C250L/EDA resulted by a high recovery of enzymatic activity, with an immobilization efficiency of 44%, and promoted a higher stabilization of chlorophyllase (four times) in the aqueous/miscible organic solvent medium. On the other hand, the inhibitory effect of refined bleached deodorized (RBD) canola oil was reduced by immobilization of chlorophyllase extract onto silica gel as compared to those obtained with other enzyme preparations. However, the re-cycled chlorophyllase extract immobilized on Eupergit C250L/EDA retained more than 75% of its initial enzyme activity after 6 cycles, whereas that immobilized on silica gel was completely inactivated. The highest catalytic efficiency, for both free and immobilized chlorophyllase on Eupergit C250L/EDA, was obtained in the ternary micellar system as compared to the aqueous/miscible organic solvent and biphasic media.     

Production of (S)-styrene oxide by recombinant Pichia pastoris containing epoxide hydrolase from Rhodotorula glutinis

A recombinant yeast Pichia pastoris carrying the gene encoding epoxide hydrolase (EH) of Rhodotorula glutinis was constructed and used for producing (S)-styrene oxide by enantioselective hydrolysis of racemic mixtures of styrene oxides. The EH gene was obtained by PCR amplification of cDNA of R. glutinis and integrated into the chromosomal DNA of P. pastoris to express EH under the control of AOX promoter. The recombinant yeast has a high hydrolytic activity toward (R)-styrene oxide as 358 nmol min⁻¹ (mg cell)⁻¹, which is about 10-fold higher than that of wild type R. glutinis. When kinetic resolution was conducted by the recombinant yeast at a high initial epoxides concentration of 526 mM that constitutes an epoxide–water two-liquid phase, chiral (S)-styrene oxide with an enantiomeric excess (e.e.) higher than 98% was obtained as 36% yield (theoretical, 50%) at 16 h.     

Efficient immobilization of epoxide hydrolase onto silica gel and use in the enantioselective hydrolysis of racemic para-nitrostyrene oxide

Epoxide hydrolase from Aspergillus niger (E.C. 3.3.2.3) was immobilized by covalent linking to epoxide-activated silica gel under mild conditions. A very easy procedure allowed to prepare an immobilized biocatalyst with more than 90% retention of the initial enzymatic activity. Immobilized and free enzyme showed very similar behaviour with respect to the effect of pH on activity and stability. One benefit of immobilizing epoxide hydrolase from A. niger on silica gel was the enhanced enzyme stability in the presence of 20% DMSO. The kinetic resolution of racemic para-nitrostyrene oxide was investigated by using this new immobilized biocatalyst. The enantioselectivity of the enzyme was not altered by the immobilization reaction: both unreacted epoxide and formed diol were obtained with very high ee (99 and 92%, respectively). In addition, the biocatalyst could be easily separated from the reaction mixture and re-used for over nine cycles without any noticeable loss of enzymatic activity or change in the enantioselectivity extent. The activity of immobilized AnEH was retained for several months.     

Free and immobilized Aspergillus niger epoxide hydrolase-catalyzed hydrolytic kinetic resolution of racemic p-chlorostyrene oxide in a neat organic solvent medium

An enantio- and regioselective hydrolytic kinetic resolution (HKR) of racemic p-chlorostyrene oxide (rac-pCSO) was achieved by epoxide hydrolase (EH) from recombinant Aspergillus niger in a selected neat organic solvent medium. The solid free EH was reused four times in repeated-batch reactors; however, the relative activity as well as the enantiomeric ratio (E-value) of this EH decreased from 100 to 20% and from 68 to 23, respectively. In order to overcome the diffusion hindrance, due to the accumulation of the hydrophilic diol in the enzyme micro-environment, and thereby to improve the operational stability of EH after recycling, strategies consisting of the immobilization of EH and the use of a binary organic solvent as the reaction medium were successfully applied. Although the highest protein immobilization yield (82%) and retention of EH activity (142%) in heptane were obtained upon the immobilization of EH on Accurel EP, the E-value and the operational stability of the resulted EH immobilizate after recycling were reduced as compared to the free EH. In contrast, the nonporous DEAE-cellulose improved the operational stability of EH by more than twofold. On the other hand, both the HKR efficiency and the operational stability of A. niger EH were found to be modest to excellent in various binary organic solvent mixtures of heptane and dioxane, depending on their ratio resulting in different Log P.     

Immobilization of fuculose-1-phosphate aldolase from E. coli to glyoxal-agarose gels by multipoint covalent attachment

Recombinant fuculose 1-phosphate aldolase (FucA) from E. coli has been immobilized by multipoint covalent attachment to glyoxal-agarose gels. Experiments, varying the main parameters that control the immobilization process (surface density of aldehyde groups, temperature, pH), were carried out. An immobilization yield of 80-90% and FucA retained activity on immobilized derivative of 10-20% can be achieved when pH 10, 20°C and 200 µmoles cm^-3 of aldehyde groups was used. The observed activity loss in the immobilization process might be related to the fact that the complex quaternary structure of the enzyme could not be maintained. A short contact-time enzyme support is required to obtain high ratio of active to total immobilized enzyme.


A highly loaded derivative of immobilized FucA (65 AU cm^-3 of support) has been prepared to use in aldol condensation reactions. Reactions catalyzed by these aldolases involve the use of non-conventional media because of substrate solubility. For instance, the condensation of dihydroxyacetone phosphate (DHAP) and Z-amino-propanal, Z-(R)-alaninal and Z-(S)- alaninal in highly concentrated water-in-oil emulsions gave synthetic yields of 40, 25 and 29% respectively.     

Immobilization of thermostable β-glucosidase from Sulfolobus shibatae by cross-linking with transglutaminase

Thermostable β-glucosidase from Sulfolobus shibatae was immobilized on silica gel modified or not modified with 3-aminopropyl-triethoxysilane using transglutaminase as a cross-linking factor. Obtained preparations had specific activity of 3883 U/g of the support, when measured at 70 °C using o-nitrophenyl β-d-galactopyranoside (GalβoNp) as substrate. The highest immobilization yield of the enzyme was achieved at pH 5.0 in reaction media. The most active preparations of immobilized β-glucosidase were obtained at a transglutaminase concentration of 40 mg/ml at 50 °C. The immobilization was almost completely terminated after 100 min of the reaction and prolonged time of this process did not cause considerable changes of the activity of the preparations. The immobilization did not influence considerably on optimum pH and temperature of GalβoNp hydrolysis catalyzed by the investigated enzyme (98 °C, pH 5.5). The broad substrate specifity and properties of the thermostable β-glucosidase from S. shibatae immobilized on silica-gel indicate its suitability for hydrolysis of lactose during whey processing.     

Kerase Immobilization by Covalent Attachment to Porous Glass

Kerase, a serine protease from Streptomyces fradiae, was immobilized on porous glass (SIKUG®) by covalent attachment, through amino groups on the enzyme. Modifications of four lysine residues (44·4% of the accessible or superficial amino groups) results in a loss of 6·5% of the enzymic activity. After immobilization, the optimal reaction pH changed from a range of 7·5-8·5 to 9-10. The immobilized protease was stable in a broad pH range, 6-12, while the soluble protease was irreversibly denaturated at alkaline pHs (pH>8). The optimal reaction temperature was displaced from 55 to 65°C, showing a higher thermal stability of the immobilized enzyme. Kerase immobilized onto porous glass was stable for at least 28 days, working in a repeated-batch process of three cycles per day, with an activity loss of 22·1 ± 3·1%.     

Chemo-enzymatic epoxidation of oleic acid and methyl oleate in solvent-free medium

Chemo-enzymatic epoxidation of oleic acid (OA) and its methyl ester has been performed using hydrogen peroxide and immobilized lipase from Candida antarctica (Novozym® 435). The purpose of the study was to characterize the reaction under solvent-free conditions. The reaction temperature had a significant impact on epoxidation of OA. At lower temperatures, the substrate conversion was hindered by the formation of solid epoxystearic acid product. Nearly 90% conversion of OA to the epoxide product was obtained after 6 h at 50°C. Longer reaction times at 40°C and above resulted in by-product formation and eventually lowered the product yield. In contrast, the reaction with methyl oleate (MO) was less influenced by temperature. Almost complete epoxidation was achieved at 40-60°C; the higher the temperature the shorter was the reaction time. The main epoxidation product obtained was epoxystearic acid methyl ester (EME), and the remaining was epoxystearic acid (EA) formed by the hydrolytic action of the lipase. Recycling of the lipase for epoxidation of MO at 50°C indicated that the immobilized enzyme was prone to activity loss.     

Production of (R)-epichlorohydrin from 1,3-dichloro-2-propanol by two-step biocatalysis using haloalcohol dehalogenase and epoxide hydrolase in two-phase system

Recombinant Escherichia coli cells harbouring haloalcohol dehalogenase and epoxide hydrolase were successfully immobilized by adsorption onto perlite and used to prepare (R)-epichlorohydrin from 1,3-dichloro-2-propanol by two-step biocatalysis in a specially designed reactor. Two-phase solution was used as the reaction system in order to improve the yield of epichlorohydrin. In the two-phase system containing 40% (v/v) cyclohexane, the yield of racemic epichlorohydrin formed in the first step was 73%, and the yield of (R)-epichlorohydrin with enantiomeric excess (ee) ≥99% increased from 19.2% to 25.1% in the second step. Ultimately, the yield of (R)-epichlorohydrin reached 26.4% by optimization of the flow rate of air and amount of immobilized cells. To our knowledge, this was the first report on production of (R)-epichlorohydrin from 1,3-dichloro-2-propanol by two-step biocatalysis using haloalcohol dehalogenase and epoxide hydrolase.     

Resolution of 1,3-dioxolane derivatives using the lipase from an Acinetobacter junii SY-01

Acinetobacter junii SY-01 producing a lipase enantioselectively hydrolyzing 1,3-dioxolane derivatives was isolated from water sludge sample and the effect of solvent, acyl donor, vinyl acetate concentration, substrate concentration, operating temperature and immobilization on activity and enantioselectivity was studied for the resolution of 1,3-dioxolane derivatives through transesterification reaction using a lipase from the isolated strain. Best selectivity was obtained at lower substrate concentration (3–5 mM), higher vinyl acetate concentration (500–1000 mM) and lower temperature (30–40 °C) in the reaction mixture. Lipase immobilized onto Accurel MP-1000 (micro-porous polypropylene) gave the best results and the reactivity was about 29-fold higher than the free enzyme without the decrease of enantioselectivity. Resolution of 1,3-dioxolane derivatives was carried out in flask scale containing 100 ml solvents using the lipase immobilized onto Accurel MP-1000. In this reaction, the yield and enantiomeric excess of the remaining (2R, 4S)-alcohol were 31.2% and 98.2%, respectively. This result suggests that it can be used as an alternative method, compared to the present synthetic method, for the production of optically pure (2R, 4S)-itraconazole.     

Improvement of the functional properties of a thermostable lipase from alcaligenes sp. via strong adsorption on hydrophobic supports

Lipase QL from Alcaligenes sp. is a quite thermostable enzyme. For example, it retains 75% of catalytic activity after incubation for 100 h at 55 °C and pH 7.0. Nevertheless, an improvement of the enzyme properties was intended via immobilization by covalent attachment to different activated supports and by adsorption on hydrophobic supports (octadecyl-sepabeads). This latter immobilization technique promotes the most interesting improvement of enzyme properties: (a) the enzyme is hyperactivated after immobilization: the immobilized preparation exhibits a 135% of catalytic activity for the hydrolysis of p-nitrophenyl propionate as compared to the soluble enzyme; (b) the thermal stability of the immobilized enzyme is highly improved: the immobilized preparation exhibits a half-life time of 12 h when incubated at 80 °C, pH 8.5 (a 25-fold stabilizing factor regarding to the soluble enzyme); (c) the optimal temperature was increased from 50 °C (soluble enzyme) up to 70 °C (hydrophobic support enzyme immobilized preparations); (d) the enantioselectivity of the enzyme for the hydrolysis of glycidyl butyrate and its dependence on the experimental conditions was significantly altered. Moreover, because the enzyme becomes reversibly but very strongly adsorbed on these highly hydrophobic supports, the lipase may be desorbed after its inactivation and the support may be reused. Very likely, adsorption occurs via interfacial activation of the lipase on the hydrophobic supports at very low ionic strength. On the other hand, all the covalent immobilization protocols used to immobilize the enzyme hardly improved the properties of the lipase.     

Immobilization of soybean seed coat peroxidase on polyaniline: Synthesis optimization and catalytic properties

Soybean seed coat peroxidase (SBP) was immobilized on various polyaniline-based polymers (PANI), activated with glutaraldehyde. The most reduced polymer (PANIG₂) showed the highest immobilization capacity (8.2 mg SBP g^-1 PANIG₂). The optimum pH for immobilization was 6.0 and the maximum retention was achieved after a 6-h reaction period. The efficiency of enzyme activity retention was 82%. When stored at 4°C, the immobilized enzyme retained 80% of its activity for 15 weeks as evidenced by tests performed at 2-week intervals. The immobilized SBP showed the same pH-activity profile as that of the free SBP for pyrogallol oxidation but the optimum temperature (55°C) was 10°C below that of the free enzyme. Kinetic analysis show that the K_m was conserved while the specific V_max dropped from 14.6 to 11.4 µmol min^-1 µg^-1, in agreement with the immobilization efficiency. Substrate specificity was practically the same for both enzymes. Immobilized SBP showed a greatly improved tolerance to different organic solvents; while free SBP lost around 90% of its activity at a 50% organic solvent concentration, immobilized SBP underwent only 30% inactivation at a concentration of 70% acetonitrile. Taking into account that immobilized HRP loses more than 40% of its activity at a 20% organic solvent concentration, immobilized SBP performed much better than its widely used counterpart HRP.