Structural evidence for a dominant role of nonpolar interactions in the binding of a transport/chemosensory receptor to its highly polar ligands.

The receptor, a maltose/maltooligosaccharide-binding protein, has been found to be an excellent system for the study of molecular recognition because its polar and nonpolar binding functions are segregated into two globular domains. The X-ray structures of the "closed" and "open" forms of the protein complexed with maltose and maltotetraitol have been determined. These sugars have approximately 3 times more accessible polar surface (from OH groups) than nonpolar surface (from small clusters of sugar ring CH bonds). In the closed structures, the oligosaccharides are buried in the groove between the two domains of the protein and bound by extensive hydrogen bonding interactions of the OH groups with the polar residues confined mostly in one domain and by nonpolar interactions of the CH clusters with four aromatic residues lodged in the other domain. Substantial contacts between the sugar hydroxyls and aromatic residues are also formed. In the open structures, the oligosaccharides are bound almost exclusively in the domain rich in aromatic residues. This finding, along with the analysis of buried surface area due to complex formations in the open and closed structures, supports a major role for nonpolar interactions in initial ligand binding even when the ligands have significantly greater potential for highly specific polar interactions.     

A salt-bridge motif involved in ligand binding and large-scale domain motions of the maltose-binding protein

The uptake of nutrients is essential for the survival of bacterial cells. Many specialized systems have evolved, such as the maltose-dependent ABC transport system that transfers oligosaccharides through the cytoplasmic membrane. The maltose/maltodextrin-binding protein (MBP) serves as an initial high-affinity binding component in the periplasm that delivers the bound sugar into the cognate ABC transporter MalFGK(2). We have investigated the domain motions induced by the binding of the ligand maltotriose into the binding cleft using molecular dynamics simulations. We find that MBP is predominantly in the open state without ligand and in the closed state with ligand bound. Oligosaccharide binding induces a closure motion (30.0 degrees rotation), whereas ligand removal leads to domain opening (32.6 degrees rotation) around a well-defined hinge affecting key areas relevant for chemotaxis and transport. Our simulations suggest that a "hook-and-eye" motif is involved in the binding. A salt bridge between Glu-111 and Lys-15 forms that effectively locks the protein-ligand complex in a semiclosed conformation inhibiting any further opening and promoting complete closure. This previously unrecognized feature seems to secure the ligand in the binding site and keeps MBP in the closed conformation and suggests a role in the initial steps of substrate transport.     

Crystallographic evidence of a large ligand-induced hinge-twist motion between the two domains of the maltodextrin binding protein involved in active transport and chemotaxis.

The periplasmic maltodextrin binding protein of Escherichia coli serves as an initial receptor for the active transport of and chemotaxis toward maltooligosaccharides. The three-dimensional structure of the binding protein complexed with maltose has been previously reported [Spurlino, J. C., Lu, G.-Y., & Quiocho, F. A. (1991) J. Biol. Chem. 266, 5202-5219]. Here we report the structure of the unliganded form of the binding protein refined to 1.8-A resolution. This structure, combined with that for the liganded form, provides the first crystallographic evidence that a major ligand-induced conformational change occurs in a periplasmic binding protein. The unliganded structure shows a rigid-body "hinge-bending" between the two globular domains by approximately 35 degrees, relative to the maltose-bound structure, opening the sugar binding site groove located between the two domains. In addition, there is an 8 degrees twist of one domain relative to the other domain. The conformational changes observed between this structure and the maltose-bound structure are consistent with current models of maltose/maltodextrin transport and maltose chemotaxis and solidify a mechanism for receptor differentiation between the ligand-free and ligand-bound forms in signal transduction.     

Kinetic evidence for a substrate-induced fit in phosphonoacetaldehyde hydrolase catalysis

Phosphonoacetaldehyde hydrolase (phosphonatase) from Bacillus cereus catalyzes hydrolytic P-C bond cleavage of phosphonoacetaldehyde (Pald) via a Schiff base intermediate formed with Lys53. A single turnover requires binding of Pald to the active site of the core domain, closure of the cap domain containing the Lys53 over the core domain, and dissociation of the products following catalysis. The ligand binding and dissociation steps occur from the "open conformer" (domains are separated and the active site is solvent-exposed), while catalysis occurs from the "closed conformer" (domains are bound together and the active site is sequestered from solvent). To test the hypothesis that bound substrate stabilizes the closed conformer, thus facilitating catalysis, the rates of chemical modification of Lys53 in the presence and absence of inert substrate and/or product analogues were compared. Acetylation of Lys53 with 2,4-dinitrophenylacetate (DNPA) resulted in the loss of enzyme activity. The pseudo-first-order rate constant for inactivation varied with pH. The pH profile of inactivation is consistent with a pK(a) of 9.3 for Lys53. The inhibitors tungstate and vinyl sulfonate, which are known to bind to active site residues comprising the core domain, protected Lys53 from acetylation. These results are consistent with a dynamic equilibrium between the open and closed conformations of phosphonatase and the hypothesis that ligand binding stabilizes the closed conformation required for catalytic turnover.     

NikD, an unusual amino acid oxidase essential for nikkomycin biosynthesis: structures of closed and open forms at 1.15 and 1.90 A resolution

NikD is an unusual amino-acid-oxidizing enzyme that contains covalently bound FAD, catalyzes a 4-electron oxidation of piperideine-2-carboxylic acid to picolinate, and plays a critical role in the biosynthesis of nikkomycin antibiotics. Crystal structures of closed and open forms of nikD, a two-domain enzyme, have been determined to resolutions of 1.15 and 1.9 A, respectively. The two forms differ by an 11 degrees rotation of the catalytic domain with respect to the FAD-binding domain. The active site is inaccessible to solvent in the closed form; an endogenous ligand, believed to be picolinate, is bound close to and parallel with the flavin ring, an orientation compatible with redox catalysis. The active site is solvent accessible in the open form, but the picolinate ligand is approximately perpendicular to the flavin ring and a tryptophan is stacked above the flavin ring. NikD also contains a mobile cation binding loop.     

The 2.3-A resolution structure of the maltose- or maltodextrin-binding protein, a primary receptor of bacterial active transport and chemotaxis

The three-dimensional structure of the maltose- or maltodextrin-binding protein (Mr = 40,622) with bound maltose has been obtained by crystallographic analysis at 2.8-A resolution. The structure, which has been partially refined at 2.3 A, is ellipsoidal with overall dimensions of 30 x 40 x 65 A and divided into two distinct globular domains by a deep groove. Although each domain is built from two peptide segments from the amino- and carboxyl-terminal halves, both domains exhibit similar supersecondary structure, consisting of a central beta-pleated sheet flanked on both sides with two or three parallel alpha-helices. The groove, which has a depth of 18 A and a base of about 9 x 18 A, contains the maltodextrin-binding site. We have previously observed the same general features in the well-refined structures of six other periplasmic receptors with specificities for L-arabinose, D-galactose/D-glucose, sulfate, phosphate, leucine/isoleucine/valine, and leucine. The bound maltose is buried in the groove and almost completely inaccessible to the bulk solvent. The groove is heavily populated by polar and aromatic groups many of which are involved in extensive hydrogen-bonding and van der Waals interactions with the maltose. All the disaccharide hydroxyl groups, which form a peripheral polar surface approximately in the plane of the sugar rings, are tied in a total of 11 direct hydrogen bonds with six charged side chains, one Trp side chain, and one peptide backbone NH, and five indirect hydrogen bonds via water molecules. The maltose is wedged between four aromatic side chains. The resulting stacking of these aromatic residues on the faces of the glucosyl units provides a majority of the van der Waals contacts in the complex. The nonreducing glucosyl unit of the maltose is involved in approximately twice as many hydrogen bonds and van der Waals contacts as the glucosyl unit at the reducing end. The binding protein-maltose complex shows the best example of the extensive use of polar and aromatic residues in binding oligosaccharides. The tertiary structure of the maltodextrin-binding protein, along with the results of genetic studies by a number of investigators, has also enabled us for the first time to map the different regions on the surface of the protein involved in the interactions with the membrane-bound protein components necessary for transport of and chemotaxis toward maltodextrins. These sites permit distinction of the "open cleft" (without bound sugar) and closed (with bound sugar) conformations of the binding protein by the chemotactic signal transducer with which the maltodextrin-binding protein interacts.(ABSTRACT TRUNCATED AT 250 WORDS)     

The X-ray crystallographic structure of Escherichia coli branching enzyme

Branching enzyme catalyzes the formation of alpha-1,6 branch points in either glycogen or starch. We report the 2.3-A crystal structure of glycogen branching enzyme from Escherichia coli. The enzyme consists of three major domains, an NH(2)-terminal seven-stranded beta-sandwich domain, a COOH-terminal domain, and a central alpha/beta-barrel domain containing the enzyme active site. While the central domain is similar to that of all the other amylase family enzymes, branching enzyme shares the structure of all three domains only with isoamylase. Oligosaccharide binding was modeled for branching enzyme using the enzyme-oligosaccharide complex structures of various alpha-amylases and cyclodextrin glucanotransferase and residues were implicated in oligosaccharide binding. While most of the oligosaccharides modeled well in the branching enzyme structure, an approximate 50 degrees rotation between two of the glucose units was required to avoid steric clashes with Trp(298) of branching enzyme. A similar rotation was observed in the mammalian alpha-amylase structure caused by an equivalent tryptophan residue in this structure. It appears that there are two binding modes for oligosaccharides in these structures depending on the identity and location of this aromatic residue.     

Large conformational changes in the catalytic cycle of glutathione synthase

Glutathione synthase catalyzes the final ATP-dependent step in glutathione biosynthesis, the formation of glutathione from gamma-glutamylcysteine and glycine. We have determined structures of yeast glutathione synthase in two forms: unbound (2.3 A resolution) and bound to its substrate gamma-glutamylcysteine, the ATP analog AMP-PNP, and two magnesium ions (1.8 A resolution). These structures reveal that upon substrate binding, large domain motions convert the enzyme from an open unliganded form to a closed conformation in which protein domains completely surround the substrate in the active site.     

The transition between the open and closed states of rubisco is triggered by the inter-phosphate distance of the bound bisphosphate

d-Ribulose-1,5-bisphosphate carboxylase/oxygenase (rubisco) catalyses the central CO(2)-fixing reaction of photosynthesis in a complex, multiple-step process. Several structures of rubisco complexed with substrate analogues, inhibitors and products have been determined by X-ray crystallography. The structures fall into two well-defined and distinct states. The active site is either "open" or "closed". The timing and mechanism of the transition between these two states have been uncertain. We solved the crystal structure of unactivated (metal-free) rubisco from tobacco with only inorganic phosphate bound and conclude that phosphate binding per se does not trigger closure, as it does in the similarly structured enzyme, triosephosphate isomerase. Comparison of all available rubisco structures suggests that, instead, the distance between the terminal phosphates (P1 and P2) of the bisphosphate ligand is the trigger: if that distance is less than 9.1 A, then the active site closes; if it is greater than 9.4 A then the enzyme remains open. Shortening of the inter-phosphate distance results from the ligand binding in a more curved conformation when O atoms of the ligand's sugar backbone interact either with the metal, if it is present, or with charged groups in the metal-binding site, if the metal is absent. This shortening brings the P1 phosphate into hydrogen bonding contact with Thr65. Thr65 exists in two discrete states related by a rotation of the backbone psi torsion angle. This rotation is coupled to domain rotation and hence to active site closure. Rotation of the side-chain of Thr65 also affects the C-terminal strand of large subunit which packs against Loop 6 after closure. The position of the C-terminal strand in the closed state is stabilised by multiple polar interactions with a distinctive highly-charged latch site involving the side-chain of Asp473. In the open state, this latch site may be occupied instead by phosphorylated anions.     

Porcine pancreatic alpha-amylase hydrolysis of hydroxyethylated amylose and specificity of subsite binding

Hydrolysis of partially hydroxyethylated amylose by porcine pancreatic alpha-amylase gives rise to a number of hydroxyethylated di-, tri-, and tetrasaccharides, as well as larger products. No modified monosaccharides were detected. The structures of the products containing two to four D-glucose residues have been analyzed by chromatographic and enzymatic techniques. In no instance were these oligosaccharides modified in the reducing-end residue. The location of hydroxyethylated glucose residues within the oligosaccharides has been interpreted in terms of the ability of that (hydroxyethyl)glucose to bind productively at each of the five subsites of the enzyme active site. Results indicate that subsite 3, the subsite at which catalytic attack occurs, is especially sensitive to changes in the substrate and that unmodified glucose is required for productive binding at this subsite. Other subsites specifically allow binding of some (hydroxyethyl)glucose isomers, but not others. Hydroxyethylation is permitted at C-2, C-3, and C-6 for residues bound at subsite 1 and is permitted at C-6 and possibly at C-2 and C-3 for residues bound at subsite 5. However, substitution is permitted only at C-3 and C-6 for binding at subsite 2 and at C-2 and C-3 for binding at subsite 4.     

"Open" structures of MurD: domain movements and structural similarities with folylpolyglutamate synthetase

UDP-N-acetylmuramoyl-l-alanine:d-glutamate (MurD) ligase catalyses the addition of d-glutamate to the nucleotide precursor UDP-N-acetylmuramoyl-l-alanine (UMA). The crystal structures of Escherichia coli in the substrate-free form and MurD complexed with UMA have been determined at 2.4 A and 1.88 A resolution, respectively. The MurD structure comprises three domains each of a topology reminiscent of nucleotide-binding folds. In the two structures the C-terminal domain undergoes a large rigid-body rotation away from the N-terminal and central domains. These two "open" structures were compared with the four published "closed" structures of MurD. In addition the comparison reveals which regions are affected by the binding of UMA, ATP and d-Glu. Also we compare and discuss two structurally characterized enzymes which belong to the same ligase superfamily: MurD and folylpolyglutamate synthetase (FGS). The analysis allows the identification of key residues involved in the reaction mechanism of FGS. The determination of the two "open" conformation structures represents a new step towards the complete elucidation of the enzymatic mechanism of the MurD ligase.     

Unusual binding interactions in PDZ domain crystal structures help explain binding mechanisms

PDZ domains most commonly bind the C‐terminus of their protein targets. Typically the C‐terminal four residues of the protein target are considered as the binding motif, particularly the C‐terminal residue (P0) and third‐last residue (P‐2) that form the major contacts with the PDZ domain's “binding groove”. We solved crystal structures of seven human PDZ domains, including five of the seven PDLIM family members. The structures of GRASP, PDLIM2, PDLIM5, and PDLIM7 show a binding mode with only the C‐terminal P0 residue bound in the binding groove. Importantly, in some cases, the P‐2 residue formed interactions outside of the binding groove, providing insight into the influence of residues remote from the binding groove on selectivity. In the GRASP structure, we observed both canonical and noncanonical binding in the two molecules present in the asymmetric unit making a direct comparison of these binding modes possible. In addition, structures of the PDZ domains from PDLIM1 and PDLIM4 also presented here allow comparison with canonical binding for the PDLIM PDZ domain family. Although influenced by crystal packing arrangements, the structures nevertheless show that changes in the positions of PDZ domain side‐chains and the αB helix allow noncanonical binding interactions. These interactions may be indicative of intermediate states between unbound and fully bound PDZ domain and target protein. The noncanonical “perpendicular” binding observed potentially represents the general form of a kinetic intermediate. Comparison with canonical binding suggests that the rearrangement during binding involves both the PDZ domain and its ligand.     

Structures of the alpha L I domain and its complex with ICAM-1 reveal a shape-shifting pathway for integrin regulation

The structure of the I domain of integrin alpha L beta 2 bound to the Ig superfamily ligand ICAM-1 reveals the open ligand binding conformation and the first example of an integrin-IgSF interface. The I domain Mg2+ directly coordinates Glu-34 of ICAM-1, and a dramatic swing of I domain residue Glu-241 enables a critical salt bridge. Liganded and unliganded structures for both high- and intermediate-affinity mutant I domains reveal that ligand binding can induce conformational change in the alpha L I domain and that allosteric signals can convert the closed conformation to intermediate or open conformations without ligand binding. Pulling down on the C-terminal alpha 7 helix with introduced disulfide bonds ratchets the beta 6-alpha 7 loop into three different positions in the closed, intermediate, and open conformations, with a progressive increase in affinity.     

Substrate binding stabilizes S-adenosylhomocysteine hydrolase in a closed conformation

Comparison of crystal structures of S-adenosylhomocysteine (AdoHcy) hydrolase in the substrate-free, NAD(+) form [Hu, Y., Komoto, J., Huang, Y., Gomi, T., Ogawa, H., Takata, Y., Fujioka, M., and Takusagawa, F. (1999) Biochemistry 38, 8323-8333] and a substrate-bound, NADH form [Turner, M. A., Yuan, C.-S., Borchardt, R. T., Hershfield, M. S., Smith, G. D., and Howell, P. L. (1998) Nat. Struct. Biol. 5, 369-376] indicates large differences in the spatial arrangement of the catalytic and NAD(+) binding domains. The substrate-free, NAD(+) form exists in an "open" form with respect to catalytic and NAD(+) binding domains, whereas the substrate-bound, NADH form exists in a closed form with respect to those domains. To address whether domain closure is induced by substrate binding or its subsequent oxidation, we have measured the rotational dynamics of spectroscopic probes covalently bound to Cys(113) and Cys(421) within the catalytic and carboxyl-terminal domains. An independent domain motion is associated with the catalytic domain prior to substrate binding, suggesting the presence of a flexible hinge element between the catalytic and NAD(+) binding domains. Following binding of substrates (i.e., adenosine or neplanocin A) or a nonsubstrate (i.e., 3'-deoxyadenosine), the independent domain motion associated with the catalytic domain is essentially abolished. Likewise, there is a substantial decrease in the average hydrodynamic volume of the protein that is consistent with a reduction in the overall dimensions of the homotetrameric enzyme following substrate binding and oxidation observed in earlier crystallographic studies. Thus, the catalytic and NAD(+) binding domains are stabilized to form a closed active site through interactions with the substrate prior to substrate oxidation.     

Ribose and glucose-galactose receptors. Competitors in bacterial chemotaxis.

The periplasmic ribose and glucose-galactose receptors (binding proteins) of Gram-negative bacteria compete for a common inner membrane receptor in bacterial chemotaxis, as well as being the essential primary receptors for their respective membrane transport systems. The high-resolution structures of the periplasmic receptors for ribose (from Escherichia coli) and glucose or galactose (from both Salmonella typhimurium and E. coli) are compared here to outline some features that may be important in their dual functions. The overall structure of each protein consists of two similar domains, both of which are made up of two non-contiguous segments of amino acid chain. Each domain is composed of a core of beta-sheet flanked on both sides with alpha-helices. The two domains are related to each other by an almost perfect intramolecular axis of symmetry. The ribose receptor is smaller as a result of a number of deletions in its sequence relative to the glucose-galactose receptor, mostly occurring in the loop regions; as a result, this protein is also more symmetrical. Many structural features, including some hydrophobic core interactions, a buried aspartate residue and several unusual turns, are conserved between the two proteins. The binding sites for ligand are in similar locations, and built along similar principles, although none of the specific interactions with the sugars is conserved. A comparison shows further that slightly different rotations relate the domains to each other in the three proteins, with the ribose receptor being the most closed, and the Salmonella glucose-galactose receptor the most open. The primary axis of relative rotation is almost perpendicular to that which describes the intramolecular symmetry in each case. These relative rotations of the domains are accompanied by the sliding of some helices as the structures adjust themselves to relieve strain. The hinges which are responsible for most of these relative domain rotations are very similar in the three proteins, consisting of a symmetrical arrangement of beta-strands and alpha-helices and two conserved water molecules that are critical to the hydrogen bonding in the important interdomain region. A region of high sequence and structural similarity between the ribose and glucose-galactose receptors is also located around the intramolecular symmetry axis, on the opposite side of the proteins from the hinge region. This region is that which is altered most by the relative rotations, and is the location of most of the known mutations which affect chemotaxis and transport in the ribose receptor.     

Crystal structure of a bacterial type IB DNA topoisomerase reveals a preassembled active site in the absence of DNA

Type IB DNA topoisomerases are found in all eukarya, two families of eukaryotic viruses (poxviruses and mimivirus), and many genera of bacteria. They alter DNA topology by cleaving and resealing one strand of duplex DNA via a covalent DNA-(3-phosphotyrosyl)-enzyme intermediate. Bacterial type IB enzymes were discovered recently and are described as poxvirus-like with respect to their small size, primary structures, and bipartite domain organization. Here we report the 1.75-A crystal structure of Deinococcus radiodurans topoisomerase IB (DraTopIB), a prototype of the bacterial clade. DraTopIB consists of an amino-terminal (N) beta-sheet domain (amino acids 1-90) and a predominantly alpha-helical carboxyl-terminal (C) domain (amino acids 91-346) that closely resemble the corresponding domains of vaccinia virus topoisomerase IB. The five amino acids of DraTopIB that comprise the catalytic pentad (Arg-137, Lys-174, Arg-239, Asn-280, and Tyr-289) are preassembled into the active site in the absence of DNA in a manner nearly identical to the pentad configuration in human topoisomerase I bound to DNA. This contrasts with the apoenzyme of vaccinia topoisomerase, in which three of the active site constituents are either displaced or disordered. The N and C domains of DraTopIB are splayed apart in an "open" conformation, in which the surface of the catalytic domain containing the active site is exposed for DNA binding. A comparison with the human topoisomerase I-DNA cocrystal structure suggests how viral and bacterial topoisomerase IB enzymes might bind DNA circumferentially via movement of the N domain into the major groove and clamping of a disordered loop of the C domain around the helix.     

Solution structure of a complex of the histidine autokinase CheA with its substrate CheY

In the bacterial chemotaxis two-component signaling system, the histidine-containing phosphotransfer domain (the "P1" domain) of CheA receives a phosphoryl group from the catalytic domain (P4) of CheA and transfers it to the cognate response regulator (RR) CheY, which is docked by the P2 domain of CheA. Phosphorylated CheY then diffuses into the cytoplasm and interacts with the FliM moiety of the flagellar motors, thereby modulating the direction of flagellar rotation. Structures of various histidine phosphotransfer domains (HPt) complexed with their cognate RR domains have been reported. Unlike the Escherichia coli chemotaxis system, however, these systems lack the additional domains dedicated to binding to the response regulators, and the interaction of an HPt domain with an RR domain in the presence of such a domain has not been examined on a structural basis. In this study, we used modern nuclear magnetic resonance techniques to construct a model for the interaction of the E. coli CheA P1 domain (HPt) and CheY (RR) in the presence of the CheY-binding domain, P2. Our results indicate that the presence of P2 may lead to a slightly different relative orientation of the HPt and RR domains versus those seen in such complex structures previously reported.     

Recognition of heteropolysaccharide alginate by periplasmic solute-binding proteins of a bacterial ABC transporter

Alginate is a heteropolysaccharide that consists of β-D-mannuronate (M) and α-L-guluronate (G). The Gram-negative bacterium Sphingomonas sp. A1 directly incorporates alginate into the cytoplasm through the periplasmic solute-binding protein (AlgQ1 and AlgQ2)-dependent ABC transporter (AlgM1-AlgM2/AlgS-AlgS). Two binding proteins with at least four subsites strongly recognize the nonreducing terminal residue of alginate at subsite 1. Here, we show the broad substrate preference of strain A1 solute-binding proteins for M and G present in alginate and demonstrate the structural determinants in binding proteins for heteropolysaccharide recognition through X-ray crystallography of four AlgQ1 structures in complex with saturated and unsaturated alginate oligosaccharides. Alginates with different M/G ratios were assimilated by strain A1 cells and bound to AlgQ1 and AlgQ2. Crystal structures of oligosaccharide-bound forms revealed that in addition to interaction between AlgQ1 and unsaturated oligosaccharides, the binding protein binds through hydrogen bonds to the C4 hydroxyl group of the saturated nonreducing terminal residue at subsite 1. The M residue of saturated oligosaccharides is predominantly accommodated at subsite 1 because of the strict binding of Ser-273 to the carboxyl group of the residue. In unsaturated trisaccharide (ΔGGG or ΔMMM)-bound AlgQ1, the protein interacts appropriately with substrate hydroxyl groups at subsites 2 and 3 to accommodate M or G, while substrate carboxyl groups are strictly recognized by the specific residues Tyr-129 at subsite 2 and Lys-22 at subsite 3. Because of this substrate recognition mechanism, strain A1 solute-binding proteins can bind heteropolysaccharide alginate with different M/G ratios.     

Structure of a triclinic ternary complex of horse liver alcohol dehydrogenase at 2.9 Å resolution

The structure of a triclinic complex between liver alcohol dehydrogenase, reduced coenzyme NADH, and the inhibitor dimethylsulfoxide has been determined to 2.9 Å resolution using isomorphous replacement methods. The heavy-atom positions were derived by molecular replacement methods using phase angles derived from a model of the orthorhombic apoenzyme structure previously determined to 2.4 Å resolution. A model of the present holoenzyme molecule was built on a Vector General 3400 display system using the RING system of programs. This model gave a crystallographic R-value of 37.9%.There are extensive conformational differences between the protein molecules in the two forms. The conformational change involves a rotation of 7.5 ° of the catalytic domains relative to the coenzyme binding domains. A hinge region for this rotation is defined within a hydrophobic core between two helices. The internal structures of the domains are preserved with the exception of a movement of a small loop in the coenzyme binding domain. A cleft between the domains is closed by this coenzyme-induced conformational change, making the active site less accessible from solution and thus more hydrophobic.The two crystallographically independent subunits are very similar and bind both coenzyme and inhibitor in an identical way within the present limits of error. The coenzyme molecule is bound in an extended conformation with the two ends in hydrophobic crevices on opposite sides of the central pleated sheet of the coenzyme binding domain. There are hydrogen bonds to oxygen atoms of the ribose moities from Asp223, Lys228 and His51. The pyrophosphate group is in contact with the side-chains of Arg47 and Arg369.No new residues are brought into the active site compared to the apoenzyme structure. The active site zinc atom is close to the hinge region, where the smallest structural changes occur. Small differences in the co-ordination geometry of the ligands Cys46, His67 and Cysl74 are not excluded and may account for the ordered mechanism. The oxygen atom of the inhibitor dimethylsulfoxide is bound directly to zinc confirming the structural basis for the suggested mechanism of action based on studies of the apoenzyme structure.     

Computational design of an integrin I domain stabilized in the open high affinity conformation

We have taken a computational approach to design mutations that stabilize a large protein domain of approximately 200 residues in two alternative conformations. Mutations in the hydrophobic core of the alphaMbeta2 integrin I domain were designed to stabilize the crystallographically defined open or closed conformers. When expressed on the cell surface as part of the intact heterodimeric receptor, binding of the designed open and closed I domains to the ligand iC3b, a form of the complement component C3, was either increased or decreased, respectively, compared to wild type. Moreover, when expressed in isolation from other integrin domains using an artificial transmembrane domain, designed open I domains were active in ligand binding, whereas designed closed and wild type I domains were inactive. Comparison to a human expert designed open mutant showed that the computationally designed mutants are far more active. Thus, computational design can be used to stabilize a molecule in a desired conformation, and conformational change in the I domain is physiologically relevant to regulation of ligand binding.